Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 006ef34bd436fbd3ea42cdf7de66d1a665527a4b / . / arch / arm / dts / imx51-babbage.dts
blob: 552196d8a60a73da762f8a06b578ecc1d67d14c2 [file] [log] [blame]
Fabio Estevam1f3b3e72021-02-15 08:58:16 -0300[diff] [blame]1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2011 Freescale Semiconductor, Inc.
4// Copyright 2011 Linaro Ltd.
5
6/dts-v1/;
7#include "imx51.dtsi"
8
9/ {
10 model = "Freescale i.MX51 Babbage Board";
11 compatible = "fsl,imx51-babbage", "fsl,imx51";
12
13 chosen {
14 stdout-path = &uart1;
15 };
16
17 memory@90000000 {
18 device_type = "memory";
19 reg = <0x90000000 0x20000000>;
20 };
21
22 ckih1 {
23 clock-frequency = <22579200>;
24 };
25
26 clk_osc: clk-osc {
27 compatible = "fixed-clock";
28 #clock-cells = <0>;
29 clock-frequency = <26000000>;
30 };
31
32 clk_osc_gate: clk-osc-gate {
33 compatible = "gpio-gate-clock";
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_clk26mhz_osc>;
36 clocks = <&clk_osc>;
37 #clock-cells = <0>;
38 enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
39 };
40
41 clk_audio: clk-audio {
42 compatible = "gpio-gate-clock";
43 pinctrl-names = "default";
44 pinctrl-0 = <&pinctrl_clk26mhz_audio>;
45 clocks = <&clk_osc_gate>;
46 #clock-cells = <0>;
47 enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
48 };
49
50 clk_usb: clk-usb {
51 compatible = "gpio-gate-clock";
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_clk26mhz_usb>;
54 clocks = <&clk_osc_gate>;
55 #clock-cells = <0>;
56 enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
57 };
58
59 display1: disp1 {
60 compatible = "fsl,imx-parallel-display";
61 #address-cells = <1>;
62 #size-cells = <0>;
63 interface-pix-fmt = "rgb24";
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_ipu_disp1>;
66
67 port@0 {
68 reg = <0>;
69
70 display0_in: endpoint {
71 remote-endpoint = <&ipu_di0_disp1>;
72 };
73 };
74
75 port@1 {
76 reg = <1>;
77
78 parallel_display_out: endpoint {
79 remote-endpoint = <&tfp410_in>;
80 };
81 };
82 };
83
84 display2: disp2 {
85 compatible = "fsl,imx-parallel-display";
86 interface-pix-fmt = "rgb565";
87 pinctrl-names = "default";
88 pinctrl-0 = <&pinctrl_ipu_disp2>;
89 status = "disabled";
90 display-timings {
91 native-mode = <&timing1>;
92 timing1: claawvga {
93 clock-frequency = <27000000>;
94 hactive = <800>;
95 vactive = <480>;
96 hback-porch = <40>;
97 hfront-porch = <60>;
98 vback-porch = <10>;
99 vfront-porch = <10>;
100 hsync-len = <20>;
101 vsync-len = <10>;
102 hsync-active = <0>;
103 vsync-active = <0>;
104 de-active = <1>;
105 pixelclk-active = <0>;
106 };
107 };
108
109 port {
110 display1_in: endpoint {
111 remote-endpoint = <&ipu_di1_disp2>;
112 };
113 };
114 };
115
116 dvi-connector {
117 compatible = "dvi-connector";
118 digital;
119
120 port {
121 dvi_connector_in: endpoint {
122 remote-endpoint = <&tfp410_out>;
123 };
124 };
125 };
126
127 dvi-encoder {
128 compatible = "ti,tfp410";
129
130 ports {
131 #address-cells = <1>;
132 #size-cells = <0>;
133
134 port@0 {
135 reg = <0>;
136
137 tfp410_in: endpoint {
138 remote-endpoint = <&parallel_display_out>;
139 };
140 };
141
142 port@1 {
143 reg = <1>;
144
145 tfp410_out: endpoint {
146 remote-endpoint = <&dvi_connector_in>;
147 };
148 };
149 };
150 };
151
152 gpio-keys {
153 compatible = "gpio-keys";
154 pinctrl-names = "default";
155 pinctrl-0 = <&pinctrl_gpio_keys>;
156
157 power {
158 label = "Power Button";
159 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
160 linux,code = <KEY_POWER>;
161 wakeup-source;
162 };
163 };
164
165 leds {
166 compatible = "gpio-leds";
167 pinctrl-names = "default";
168 pinctrl-0 = <&pinctrl_gpio_leds>;
169
170 led-diagnostic {
171 label = "diagnostic";
172 gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
173 };
174 };
175
176 regulators {
177 compatible = "simple-bus";
178 #address-cells = <1>;
179 #size-cells = <0>;
180
181 reg_hub_reset: regulator@0 {
182 compatible = "regulator-fixed";
183 pinctrl-names = "default";
184 pinctrl-0 = <&pinctrl_usbotgreg>;
185 reg = <0>;
186 regulator-name = "hub_reset";
187 regulator-min-microvolt = <5000000>;
188 regulator-max-microvolt = <5000000>;
189 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
190 enable-active-high;
191 };
192 };
193
194 sound {
195 compatible = "fsl,imx51-babbage-sgtl5000",
196 "fsl,imx-audio-sgtl5000";
197 model = "imx51-babbage-sgtl5000";
198 ssi-controller = <&ssi2>;
199 audio-codec = <&sgtl5000>;
200 audio-routing =
201 "MIC_IN", "Mic Jack",
202 "Mic Jack", "Mic Bias",
203 "Headphone Jack", "HP_OUT";
204 mux-int-port = <2>;
205 mux-ext-port = <3>;
206 };
207
208 usbphy1: usbphy1 {
209 compatible = "usb-nop-xceiv";
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_usbh1reg>;
212 clocks = <&clk_usb>;
213 clock-names = "main_clk";
214 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
215 vcc-supply = <&vusb_reg>;
216 #phy-cells = <0>;
217 };
218};
219
220&audmux {
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_audmux>;
223 status = "okay";
224};
225
226&ecspi1 {
227 pinctrl-names = "default";
228 pinctrl-0 = <&pinctrl_ecspi1>;
229 cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
230 <&gpio4 25 GPIO_ACTIVE_LOW>;
231 status = "okay";
232
233 pmic: mc13892@0 {
234 compatible = "fsl,mc13892";
235 pinctrl-names = "default";
236 pinctrl-0 = <&pinctrl_pmic>;
237 spi-max-frequency = <6000000>;
238 spi-cs-high;
239 reg = <0>;
240 interrupt-parent = <&gpio1>;
241 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
242 fsl,mc13xxx-uses-adc;
243 fsl,mc13xxx-uses-rtc;
244
245 regulators {
246 sw1_reg: sw1 {
247 regulator-min-microvolt = <600000>;
248 regulator-max-microvolt = <1375000>;
249 regulator-boot-on;
250 regulator-always-on;
251 };
252
253 sw2_reg: sw2 {
254 regulator-min-microvolt = <900000>;
255 regulator-max-microvolt = <1850000>;
256 regulator-boot-on;
257 regulator-always-on;
258 };
259
260 sw3_reg: sw3 {
261 regulator-min-microvolt = <1100000>;
262 regulator-max-microvolt = <1850000>;
263 regulator-boot-on;
264 regulator-always-on;
265 };
266
267 sw4_reg: sw4 {
268 regulator-min-microvolt = <1100000>;
269 regulator-max-microvolt = <1850000>;
270 regulator-boot-on;
271 regulator-always-on;
272 };
273
274 vpll_reg: vpll {
275 regulator-min-microvolt = <1050000>;
276 regulator-max-microvolt = <1800000>;
277 regulator-boot-on;
278 regulator-always-on;
279 };
280
281 vdig_reg: vdig {
282 regulator-min-microvolt = <1650000>;
283 regulator-max-microvolt = <1650000>;
284 regulator-boot-on;
285 };
286
287 vsd_reg: vsd {
288 regulator-min-microvolt = <1800000>;
289 regulator-max-microvolt = <3150000>;
290 };
291
292 vusb_reg: vusb {
293 regulator-boot-on;
294 };
295
296 vusb2_reg: vusb2 {
297 regulator-min-microvolt = <2400000>;
298 regulator-max-microvolt = <2775000>;
299 regulator-boot-on;
300 regulator-always-on;
301 };
302
303 vvideo_reg: vvideo {
304 regulator-min-microvolt = <2775000>;
305 regulator-max-microvolt = <2775000>;
306 };
307
308 vaudio_reg: vaudio {
309 regulator-min-microvolt = <2300000>;
310 regulator-max-microvolt = <3000000>;
311 };
312
313 vcam_reg: vcam {
314 regulator-min-microvolt = <2500000>;
315 regulator-max-microvolt = <3000000>;
316 };
317
318 vgen1_reg: vgen1 {
319 regulator-min-microvolt = <1200000>;
320 regulator-max-microvolt = <1200000>;
321 };
322
323 vgen2_reg: vgen2 {
324 regulator-min-microvolt = <1200000>;
325 regulator-max-microvolt = <3150000>;
326 regulator-always-on;
327 };
328
329 vgen3_reg: vgen3 {
330 regulator-min-microvolt = <1800000>;
331 regulator-max-microvolt = <2900000>;
332 regulator-always-on;
333 };
334 };
335 };
336
337 flash: at45db321d@1 {
338 #address-cells = <1>;
339 #size-cells = <1>;
340 compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
341 spi-max-frequency = <25000000>;
342 reg = <1>;
343
344 partition@0 {
345 label = "U-Boot";
346 reg = <0x0 0x40000>;
347 read-only;
348 };
349
350 partition@40000 {
351 label = "Kernel";
352 reg = <0x40000 0x3c0000>;
353 };
354 };
355};
356
357&esdhc1 {
358 pinctrl-names = "default";
359 pinctrl-0 = <&pinctrl_esdhc1>;
360 cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
361 wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
362 status = "okay";
363};
364
365&esdhc2 {
366 pinctrl-names = "default";
367 pinctrl-0 = <&pinctrl_esdhc2>;
368 cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
369 wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
370 status = "okay";
371};
372
373&fec {
374 pinctrl-names = "default";
375 pinctrl-0 = <&pinctrl_fec>;
376 phy-mode = "mii";
377 phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
378 phy-reset-duration = <1>;
379 status = "okay";
380};
381
382&i2c1 {
383 pinctrl-names = "default";
384 pinctrl-0 = <&pinctrl_i2c1>;
385 status = "okay";
386};
387
388&i2c2 {
389 pinctrl-names = "default";
390 pinctrl-0 = <&pinctrl_i2c2>;
391 status = "okay";
392
393 sgtl5000: codec@a {
394 compatible = "fsl,sgtl5000";
395 reg = <0x0a>;
396 #sound-dai-cells = <0>;
397 clocks = <&clk_audio>;
398 VDDA-supply = <&vdig_reg>;
399 VDDIO-supply = <&vvideo_reg>;
400 };
401};
402
403&ipu_di0_disp1 {
404 remote-endpoint = <&display0_in>;
405};
406
407&ipu_di1_disp2 {
408 remote-endpoint = <&display1_in>;
409};
410
411&kpp {
412 pinctrl-names = "default";
413 pinctrl-0 = <&pinctrl_kpp>;
414 linux,keymap = <
415 MATRIX_KEY(0, 0, KEY_UP)
416 MATRIX_KEY(0, 1, KEY_DOWN)
417 MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
418 MATRIX_KEY(0, 3, KEY_HOME)
419 MATRIX_KEY(1, 0, KEY_RIGHT)
420 MATRIX_KEY(1, 1, KEY_LEFT)
421 MATRIX_KEY(1, 2, KEY_ENTER)
422 MATRIX_KEY(1, 3, KEY_VOLUMEUP)
423 MATRIX_KEY(2, 0, KEY_F6)
424 MATRIX_KEY(2, 1, KEY_F8)
425 MATRIX_KEY(2, 2, KEY_F9)
426 MATRIX_KEY(2, 3, KEY_F10)
427 MATRIX_KEY(3, 0, KEY_F1)
428 MATRIX_KEY(3, 1, KEY_F2)
429 MATRIX_KEY(3, 2, KEY_F3)
430 MATRIX_KEY(3, 3, KEY_POWER)
431 >;
432 status = "okay";
433};
434
435&pmu {
436 secure-reg-access;
437};
438
439&ssi2 {
440 status = "okay";
441};
442
443&uart1 {
444 pinctrl-names = "default";
445 pinctrl-0 = <&pinctrl_uart1>;
446 uart-has-rtscts;
447 status = "okay";
448};
449
450&uart2 {
451 pinctrl-names = "default";
452 pinctrl-0 = <&pinctrl_uart2>;
453 status = "okay";
454};
455
456&uart3 {
457 pinctrl-names = "default";
458 pinctrl-0 = <&pinctrl_uart3>;
459 uart-has-rtscts;
460 status = "okay";
461};
462
463&usbh1 {
464 pinctrl-names = "default";
465 pinctrl-0 = <&pinctrl_usbh1>;
466 vbus-supply = <&reg_hub_reset>;
467 fsl,usbphy = <&usbphy1>;
468 phy_type = "ulpi";
469 status = "okay";
470};
471
472&usbphy0 {
473 vcc-supply = <&vusb_reg>;
474};
475
476&usbotg {
477 dr_mode = "otg";
478 disable-over-current;
479 phy_type = "utmi_wide";
480 status = "okay";
481};
482
483&iomuxc {
484 imx51-babbage {
485 pinctrl_audmux: audmuxgrp {
486 fsl,pins = <
487 MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
488 MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
489 MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
490 MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
491 >;
492 };
493
494 pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
495 fsl,pins = <
496 MX51_PAD_CSPI1_RDY__GPIO4_26 0x85
497 >;
498 };
499
500 pinctrl_clk26mhz_osc: clk26mhzoscgrp {
501 fsl,pins = <
502 MX51_PAD_DI1_PIN12__GPIO3_1 0x85
503 >;
504 };
505
506 pinctrl_clk26mhz_usb: clk26mhzusbgrp {
507 fsl,pins = <
508 MX51_PAD_EIM_D17__GPIO2_1 0x85
509 >;
510 };
511
512 pinctrl_ecspi1: ecspi1grp {
513 fsl,pins = <
514 MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
515 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
516 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
517 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
518 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */
519 >;
520 };
521
522 pinctrl_esdhc1: esdhc1grp {
523 fsl,pins = <
524 MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
525 MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
526 MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
527 MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
528 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
529 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
530 MX51_PAD_GPIO1_0__GPIO1_0 0x100
531 MX51_PAD_GPIO1_1__GPIO1_1 0x100
532 >;
533 };
534
535 pinctrl_esdhc2: esdhc2grp {
536 fsl,pins = <
537 MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
538 MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
539 MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
540 MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
541 MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
542 MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
543 MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */
544 MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */
545 >;
546 };
547
548 pinctrl_fec: fecgrp {
549 fsl,pins = <
550 MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5
551 MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085
552 MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085
553 MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085
554 MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180
555 MX51_PAD_EIM_CS5__FEC_CRS 0x00000180
556 MX51_PAD_NANDF_RB2__FEC_COL 0x00000180
557 MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180
558 MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180
559 MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004
560 MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004
561 MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004
562 MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004
563 MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004
564 MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004
565 MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004
566 MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180
567 MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4
568 MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */
569 >;
570 };
571
572 pinctrl_gpio_keys: gpiokeysgrp {
573 fsl,pins = <
574 MX51_PAD_EIM_A27__GPIO2_21 0x5
575 >;
576 };
577
578 pinctrl_gpio_leds: gpioledsgrp {
579 fsl,pins = <
580 MX51_PAD_EIM_D22__GPIO2_6 0x80000000
581 >;
582 };
583
584 pinctrl_i2c1: i2c1grp {
585 fsl,pins = <
586 MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed
587 MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed
588 >;
589 };
590
591 pinctrl_i2c2: i2c2grp {
592 fsl,pins = <
593 MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
594 MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
595 >;
596 };
597
598 pinctrl_ipu_disp1: ipudisp1grp {
599 fsl,pins = <
600 MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
601 MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
602 MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
603 MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
604 MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
605 MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
606 MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
607 MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
608 MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
609 MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
610 MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
611 MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
612 MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
613 MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
614 MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
615 MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
616 MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
617 MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
618 MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
619 MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
620 MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
621 MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
622 MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
623 MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
624 MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
625 MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
626 >;
627 };
628
629 pinctrl_ipu_disp2: ipudisp2grp {
630 fsl,pins = <
631 MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5
632 MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5
633 MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5
634 MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5
635 MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5
636 MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5
637 MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5
638 MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5
639 MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5
640 MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5
641 MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5
642 MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5
643 MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5
644 MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5
645 MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5
646 MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5
647 MX51_PAD_DI2_PIN2__DI2_PIN2 0x5
648 MX51_PAD_DI2_PIN3__DI2_PIN3 0x5
649 MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
650 MX51_PAD_DI_GP4__DI2_PIN15 0x5
651 >;
652 };
653
654 pinctrl_kpp: kppgrp {
655 fsl,pins = <
656 MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
657 MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
658 MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
659 MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
660 MX51_PAD_KEY_COL0__KEY_COL0 0xe8
661 MX51_PAD_KEY_COL1__KEY_COL1 0xe8
662 MX51_PAD_KEY_COL2__KEY_COL2 0xe8
663 MX51_PAD_KEY_COL3__KEY_COL3 0xe8
664 >;
665 };
666
667 pinctrl_pmic: pmicgrp {
668 fsl,pins = <
669 MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */
670 >;
671 };
672
673 pinctrl_uart1: uart1grp {
674 fsl,pins = <
675 MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
676 MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
677 MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
678 MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
679 >;
680 };
681
682 pinctrl_uart2: uart2grp {
683 fsl,pins = <
684 MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
685 MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
686 >;
687 };
688
689 pinctrl_uart3: uart3grp {
690 fsl,pins = <
691 MX51_PAD_EIM_D25__UART3_RXD 0x1c5
692 MX51_PAD_EIM_D26__UART3_TXD 0x1c5
693 MX51_PAD_EIM_D27__UART3_RTS 0x1c5
694 MX51_PAD_EIM_D24__UART3_CTS 0x1c5
695 >;
696 };
697
698 pinctrl_usbh1: usbh1grp {
699 fsl,pins = <
700 MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000
701 MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000
702 MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000
703 MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000
704 MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000
705 MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000
706 MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000
707 MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000
708 MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000
709 MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000
710 MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000
711 >;
712 };
713
714 pinctrl_usbh1reg: usbh1reggrp {
715 fsl,pins = <
716 MX51_PAD_EIM_D21__GPIO2_5 0x85
717 >;
718 };
719
720 pinctrl_usbotgreg: usbotgreggrp {
721 fsl,pins = <
722 MX51_PAD_GPIO1_7__GPIO1_7 0x85
723 >;
724 };
725 };
726};