Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 0099dfd5e53703ff94677ec3490134ae436fc8f1 / . / arch / arm / dts / am335x-rut.dts
blob: cc06f5d23ad92f2da5b08993a6505de7597b146e [file] [log] [blame]
Heiko Schocher71423432016-06-13 15:16:01 +0200[diff] [blame]1/*
2 * Copyright (C) 2014 DENX Software Engineering GmbH
3 * Heiko Schocher <hs@denx.de>
4 *
5 * Based on:
6 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12/dts-v1/;
13
14#include "am33xx.dtsi"
15#include <dt-bindings/input/input.h>
16
17/ {
18 model = "RUT";
19 compatible = "ti,am335x-evm", "ti,am33xx";
20
21 buzzer {
22 compatible = "pwm-beeper";
23 pwms = <&ecap0 0 16000 0>;
24 };
25
26 chosen {
27 stdout-path = &uart0;
28 tick-timer = &timer2;
29 };
30
31 cpus {
32 cpu@0 {
33 cpu0-supply = <&dcdc2_reg>;
34 };
35 };
36
37 gpio_keys: powerfail-keys {
38 compatible = "gpio-keys";
Heiko Schocher71423432016-06-13 15:16:01 +0200[diff] [blame]39 autorepeat;
40
41 pwr-fail0 {
42 label = "power-fail";
43 linux,code = <KEY_POWER>;
44 gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
45 gpio-key,wakeup;
46 };
47
48 pwr-fail1 {
49 label = "power-fail-redundant";
50 linux,code = <KEY_POWER>;
51 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
52 gpio-key,wakeup;
53 };
54 };
55
56 leds {
57 compatible = "gpio-leds";
58
59 led_green {
60 label = "rut:green:debug:run_mode";
61 gpios = <&gpio3 20 1>;
62 /* activelow = 1, default trigger heartbeat */
63 };
64 led_yellow {
65 label = "rut:debug:yellow:osc_ch1";
66 gpios = <&gpio0 17 1>;
67 /* activelow = 1, default trigger mmc0 */
68 };
69 led_red {
70 label = "rut:debug:red:osc_ch2";
71 gpios = <&gpio0 16 1>;
72 /* activelow = 1, default trigger debug_osc_ch2 */
73 };
74 /* optional */
75 led_alive {
76 label = "rut:alive";
77 gpios = <&gpio0 15 1>;
78 linux,default-trigger = "heartbeat";
79 /* activelow = 1, default trigger heartbeat */
80 };
81
82 };
83
84 memory {
85 device_type = "memory";
86 reg = <0x80000000 0x10000000>; /* 256 MB */
87 };
88
89 panel {
90 compatible = "ti,tilcdc,panel";
91 pinctrl-names = "default";
92 pinctrl-0 = <&lcd_pins_s0>;
93 status = "okay";
94
95 /* FORMIKE_KWH043ST20_F01 */
96 panel-info {
97 ac-bias = <255>;
98 ac-bias-intrpt = <0>;
99 dma-burst-sz = <16>;
100 bpp = <16>;
101 fdd = <0x80>;
102 sync-edge = <0>;
103 sync-ctrl = <1>;
104 raster-order = <0>;
105 fifo-th = <0>;
106 tft-alt-mode = <0>;
107 invert-pxl-clk = <1>;
108 };
109
110 display-timings {
111 native-mode = <&timing1>;
112 timing1: 480x800p60 {
113 clock-frequency = <29925000>;
114 hactive = <480>;
115 vactive = <800>;
116 hfront-porch = <50>;
117 hback-porch = <50>;
118 hsync-len = <50>;
119 vback-porch = <50>;
120 vfront-porch = <50>;
121 vsync-len = <50>;
122 hsync-active = <1>;
123 vsync-active = <1>;
124 };
125 };
126 };
127
128 vmmc: fixedregulator3 {
129 compatible = "regulator-fixed";
130 regulator-name = "vmmc";
131 regulator-min-microvolt = <3300000>;
132 regulator-max-microvolt = <3300000>;
133 };
134
135 watchdog {
136 compatible = "linux,wdt-gpio";
137 gpios = <&gpio0 14 0>;
138 hw_algo = "level";
139 hw_margin_ms = <30000>;
140 };
141};
142
143&aes {
144 status = "okay";
145};
146
147&cppi41dma {
148 status = "okay";
149};
150
151&cpsw_emac0 {
Heiko Schocher71423432016-06-13 15:16:01 +0200[diff] [blame]152 phy-mode = "rmii";
Grygorii Strashko3b3e8a32019-08-31 10:30:34 +0300[diff] [blame]153 phy-handle = <&ethernet_phy>;
Heiko Schocher71423432016-06-13 15:16:01 +0200[diff] [blame]154};
155
156&davinci_mdio {
157 pinctrl-names = "default", "sleep";
158 pinctrl-0 = <&davinci_mdio_default>;
159 pinctrl-1 = <&davinci_mdio_sleep>;
160 status = "okay";
161 gpios = <&gpio2 18 0>;
162
163 ethernet_phy: ethernet-phy@1 {
164 compatible = "ethernet-phy-id2000.5ce1";
165 reg = <1>;
166 natsemi,master_mode_fixup;
167 };
168};
169
170&elm {
171 status = "okay";
172};
173
174&epwmss0 {
175 status = "okay";
176
Dario Binacchi6337d532020-12-30 00:06:30 +0100[diff] [blame]177 ecap0: ecap@100 {
Heiko Schocher71423432016-06-13 15:16:01 +0200[diff] [blame]178 status = "okay";
179 pinctrl-names = "default";
180 pinctrl-0 = <&ecap0_pins>;
181 };
182};
183
184&epwmss1 {
185 status = "okay";
Felix Brackfdce9d32018-12-05 14:53:42 +0100[diff] [blame]186 pinctrl-names = "default";
187 pinctrl-0 = <&epwmss1_pins>;
Heiko Schocher71423432016-06-13 15:16:01 +0200[diff] [blame]188};
189
190&gpmc {
191 pinctrl-names = "default";
192 pinctrl-0 = <&nandflash_pins>;
193 status = "okay";
194
195 ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
196
197 nand@0,0 {
198 reg = <0 0 0>; /* CS0, offset 0 */
199 nand-bus-width = <8>;
200 ti,nand-ecc-opt = "bch8";
201 gpmc,device-nand = "true";
202 gpmc,device-width = <1>;
203 gpmc,sync-clk-ps = <0>;
204 gpmc,cs-on-ns = <0>;
205 gpmc,cs-rd-off-ns = <57>;
206 gpmc,cs-wr-off-ns = <57>;
207 gpmc,adv-on-ns = <0>;
208 gpmc,adv-rd-off-ns = <57>;
209 gpmc,adv-wr-off-ns = <57>;
210 gpmc,we-on-ns = <0>;
211 gpmc,we-off-ns = <48>;
212 gpmc,oe-on-ns = <0>;
213 gpmc,oe-off-ns = <57>;
214 gpmc,access-ns = <38>;
215 gpmc,rd-cycle-ns = <67>;
216 gpmc,wr-cycle-ns = <67>;
217 gpmc,wait-on-read = "true";
218 gpmc,wait-on-write = "true";
219 gpmc,bus-turnaround-ns = <0>;
220 gpmc,cycle2cycle-delay-ns = <0>;
221 gpmc,clk-activation-ns = <0>;
222 gpmc,wait-monitoring-ns = <0>;
223 gpmc,wr-access-ns = <96>;
224 gpmc,wr-data-mux-bus-ns = <0>;
225
226 #address-cells = <1>;
227 #size-cells = <1>;
228 elm_id = <&elm>;
229 };
230};
231
232&i2c0 {
233 pinctrl-names = "default";
234 pinctrl-0 = <&i2c0_pins>;
235 clock-frequency = <400000>;
236 status = "okay";
237
238 eeprom: eeprom@50 {
239 compatible = "atmel,24c128";
240 reg = <0x50>;
241 pagesize = <32>;
242 };
243
244 tps: tps@24 {
245 reg = <0x24>;
246 };
247};
248
249&i2c1 {
250 pinctrl-names = "default";
251 pinctrl-0 = <&i2c1_pins>;
252 clock-frequency = <100000>;
253 status = "okay";
254
255 atmel: atmel_mxt_ts@4a {
256 compatible = "atmel,maxtouch";
257 reg = <0x4a>;
258 interrupt-parent = <&gpio1>;
259 interrupts = <28 8>;
260 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
261 };
262
263 temp@48 {
264 compatible = "st,ds75";
265 reg = <0x4c>;
266 };
267};
268
269&lcdc {
270 status = "okay";
271};
272
273&mac {
274 pinctrl-names = "default", "sleep";
275 pinctrl-0 = <&cpsw_default>;
276 pinctrl-1 = <&cpsw_sleep>;
277 status = "okay";
278};
279
280&mmc1 {
281 vmmc-supply = <&vmmc>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&mmc1_pins>;
284 status = "okay";
285};
286
287&phy_sel {
288 rmii-clock-ext;
289};
290
291&sham {
292 status = "okay";
293};
294
295&spi0 {
296 pinctrl-names = "default";
297 pinctrl-0 = <&spi0_pins>;
298 status = "okay";
299 spi-flash@0 {
300 #address-cells = <1>;
301 #size-cells = <1>;
302 compatible = "mx25l25635e";
303 reg = <0>; /* Chip select 0 */
304 spi-max-frequency = <24000000>;
305
306 partition@0 {
307 label = "dummy";
308 reg = <0x0000000 0x8000>;
309 };
310 };
311};
312
313&spi1 {
314 pinctrl-names = "default";
315 pinctrl-0 = <&spi1_pins>;
316 status = "okay";
317
318 lcd_init: lcd@0 {
319 compatible = "formike,kwh043st20";
320 reg = <0>;
321 reset-gpios = <&gpio3 19 0>;
322 spi-max-frequency = <1200000>;
323 spi-cpol;
324 spi-cpha;
325 power-on-delay = <10>;
326 reset-delay = <10>;
327 };
328};
329
330/include/ "tps65217.dtsi"
331
332&tps {
333 backlight0: backlight {
334 isel = <1>; /* 1 - ISET1, 2 ISET2 */
335 fdim = <1000>; /* TPS65217_BL_FDIM_100HZ */
336 default-brightness = <80>;
337 };
338
339 regulators {
340 dcdc1_reg: regulator@0 {
341 regulator-always-on;
342 };
343
344 dcdc2_reg: regulator@1 {
345 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
346 regulator-name = "vdd_mpu";
347 regulator-min-microvolt = <925000>;
348 regulator-max-microvolt = <1325000>;
349 regulator-boot-on;
350 regulator-always-on;
351 };
352
353 dcdc3_reg: regulator@2 {
354 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
355 regulator-name = "vdd_core";
356 regulator-min-microvolt = <925000>;
357 regulator-max-microvolt = <1150000>;
358 regulator-boot-on;
359 regulator-always-on;
360 };
361
362 ldo1_reg: regulator@3 {
363 regulator-always-on;
364 };
365
366 ldo2_reg: regulator@4 {
367 regulator-always-on;
368 };
369
370 ldo3_reg: regulator@5 {
371 regulator-always-on;
372 };
373
374 ldo4_reg: regulator@6 {
375 regulator-always-on;
376 };
377 };
378};
379
380&tscadc {
381 status = "okay";
382 adc {
383 ti,adc-channels = <4 5 6 7>;
384 };
385};
386
387&uart0 {
388 pinctrl-names = "default";
389 pinctrl-0 = <&uart0_pins>;
390
391 status = "okay";
392};
393
394&usb {
395 status = "okay";
396};
397
398&usb_ctrl_mod {
399 status = "okay";
400};
401
402&usb0 {
403 dr_mode = "device";
404 status = "okay";
405};
406
407&usb0_phy {
408 status = "okay";
409};
410
411&am33xx_pinmux {
412 pinctrl-names = "default";
413 pinctrl-0 = <&clkout2_pin &gpio_pin>;
414
415 clkout2_pin: pinmux_clkout2_pin {
416 pinctrl-single,pins = <
417 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
418 >;
419 };
420
421 cpsw_default: cpsw_default {
422 pinctrl-single,pins = <
423 /* Slave 1 */
424 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
425 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.mii1_rxerr */
426 0x114 (MUX_MODE1) /* mii1_txen.mii1_txen */
427 0x124 (MUX_MODE1) /* mii1_txd1.mii1_txd1 */
428 0x128 (MUX_MODE1) /* mii1_txd0.mii1_txd0 */
429 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.mii1_rxd1 */
430 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.mii1_rxd0 */
431 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
432 >;
433 };
434
435 cpsw_sleep: cpsw_sleep {
436 pinctrl-single,pins = <
437 /* Slave 1 reset value */
438 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
439 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
440 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
441 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
442 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
443 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
444 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
445 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
446 >;
447 };
448
449 davinci_mdio_default: davinci_mdio_default {
450 pinctrl-single,pins = <
451 /* MDIO */
452 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
453 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
454 >;
455 };
456
457 davinci_mdio_sleep: davinci_mdio_sleep {
458 pinctrl-single,pins = <
459 /* MDIO reset value */
460 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
461 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
462 >;
463 };
464
465 ecap0_pins: ecap_pins {
466 pinctrl-single,pins = <
467 0x164 (MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 buzzer frequency: ecap.0 */
468 >;
469 };
470
471 epwmss1_pins: epwmss_pins {
472 pinctrl-single,pins = <
473 0x48 (PIN_INPUT | MUX_MODE7) /* gpmc_a2.gpio1_18 buzzer frequency: ehrpwm1A high-Z due to connected to ecap0 by R0469 */
474 0x4c (MUX_MODE6) /* gpmc_a3.ehrpwm1B buzzer volume pwm */
475 >;
476 };
477
478 gpio_pin: gpio_pin {
479 pinctrl-single,pins = <
480 0x6c (PIN_INPUT | MUX_MODE7) /* gpmc_a11.gpio1_27 PWR_FAIL_GPIO_SPARE */
481 0x78 (PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) /* gpmc_be1n.gpio1_28 TOUCH_CHANGE_N */
482 0x88 (PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) /* gpmc_csn3.gpio2_0 RUT_GPIO0_GPIO */
483 0x118 (PIN_INPUT | MUX_MODE7) /* gmii1_rxdv.gpio3_4 PWR_FAIL_GPIO */
484 0x11c (MUX_MODE7) /* mii1_txd3.gpio0_16 DEBUG_OSC_CH2_GPIO */
485 0x120 (MUX_MODE7) /* mii1_txd2.gpio0_17 DEBUG_OSC_CH1_GPIO */
486 0x134 (MUX_MODE7) /* gmii1_rxd3.gpio2_18 PHY_RSTn_GPIO */
487 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gmii1_rxd2.gpio2_19 PHY_INT_GPIO */
488 0x180 (MUX_MODE7) /* uart1_rxd.gpio0_14 WATCHDOG_TRIGGER_GPIO */
489 0x184 (MUX_MODE7) /* uart1_txd.gpio0_15 ALIVE_LED_N_GPIO */
490 0x1a0 (MUX_MODE7) /* mcasp0_aclkr.gpio3_18 MAXTOUCH_RESET_GPIO */
491 0x1a4 (MUX_MODE7) /* mcasp0_fsr.gpio3_19 DISPLAY_RESET_GPIO */
492 0x1a8 (MUX_MODE7) /* mcasp0_axr1.gpio3_20 DEBUG_RUN_MODE_GPIO */
493 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 NORFLASH_WP_GPIO */
494 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
495 >;
496 };
497
498 i2c0_pins: pinmux_i2c0_pins {
499 pinctrl-single,pins = <
500 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
501 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
502 >;
503 };
504
505 i2c1_pins: pinmux_i2c1_pins {
506 pinctrl-single,pins = <
507 0x168 (PIN_INPUT | MUX_MODE3) /* uart0_ctsn.i2c1_sda */
508 0x16c (PIN_INPUT | MUX_MODE3) /* uart0.rtsn.i2c1_scl */
509 >;
510 };
511
512 lcd_pins_s0: lcd_pins_s0 {
513 pinctrl-single,pins = <
514 0x20 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
515 0x24 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
516 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
517 0x2c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
518 0x30 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
519 0x34 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
520 0x38 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
521 0x3c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
522 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
523 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
524 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
525 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
526 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
527 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
528 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
529 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
530 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
531 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
532 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
533 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
534 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
535 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
536 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
537 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
538 0xe0 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
539 0xe4 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
540 0xe8 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
541 0xec (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
542 >;
543 };
544
545 mmc1_pins: mmc1_pins {
546 pinctrl-single,pins = <
547 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
548 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
549 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
550 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
551 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
552 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
553 >;
554 };
555
556 nandflash_pins: pinmux_nandflash_pins {
557 pinctrl-single,pins = <
558 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
559 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
560 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
561 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
562 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
563 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
564 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
565 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
566 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
567 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
568 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
569 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
570 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
571 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
572 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
573 >;
574 };
575
576 spi0_pins: pinmux_spi0_pins {
577 pinctrl-single,pins = <
578 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_sclk.spi0_sclk */
579 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
580 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d1.spi0_d1 */
581 0x15c (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_CS0.spi0_CS0 */
582 >;
583 };
584
585 spi1_pins: pinmux_spi1_pins {
586 pinctrl-single,pins = <
587 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
588 0x194 (PIN_INPUT_PULLUP | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
589 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
590 0x19c (PIN_INPUT_PULLUP | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
591 >;
592 };
593
594 uart0_pins: pinmux_uart0_pins {
595 pinctrl-single,pins = <
596 0x170 (PIN_INPUT | MUX_MODE0) /* uart0_rxd.uart0_rxd */
597 0x174 (PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
598 >;
599 };
600};