Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Daniel Allred | 1aad38f | 2016-05-19 19:10:53 -0500 | [diff] [blame] | 2 | /* |
| 3 | * Copyright 2016 Texas Instruments, Inc. |
Daniel Allred | 1aad38f | 2016-05-19 19:10:53 -0500 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include <common.h> |
Masahiro Yamada | b08c8c4 | 2018-03-05 01:20:11 +0900 | [diff] [blame] | 7 | #include <linux/libfdt.h> |
Daniel Allred | 1aad38f | 2016-05-19 19:10:53 -0500 | [diff] [blame] | 8 | #include <fdt_support.h> |
| 9 | #include <malloc.h> |
| 10 | |
| 11 | #include <asm/omap_common.h> |
| 12 | #include <asm/arch-omap5/sys_proto.h> |
| 13 | |
| 14 | #ifdef CONFIG_TI_SECURE_DEVICE |
| 15 | |
| 16 | /* Give zero values if not already defined */ |
| 17 | #ifndef TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ |
| 18 | #define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ (0) |
| 19 | #endif |
| 20 | #ifndef CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ |
| 21 | #define CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ (0) |
| 22 | #endif |
| 23 | |
| 24 | static u32 hs_irq_skip[] = { |
| 25 | 8, /* Secure violation reporting interrupt */ |
| 26 | 15, /* One interrupt for SDMA by secure world */ |
| 27 | 118 /* One interrupt for Crypto DMA by secure world */ |
| 28 | }; |
| 29 | |
| 30 | static int ft_hs_fixup_crossbar(void *fdt, bd_t *bd) |
| 31 | { |
| 32 | const char *path; |
| 33 | int offs; |
| 34 | int ret; |
| 35 | int len, i, old_cnt, new_cnt; |
| 36 | u32 *temp; |
| 37 | const u32 *p_data; |
| 38 | |
| 39 | /* |
| 40 | * Increase the size of the fdt |
| 41 | * so we have some breathing room |
| 42 | */ |
| 43 | ret = fdt_increase_size(fdt, 512); |
| 44 | if (ret < 0) { |
| 45 | printf("Could not increase size of device tree: %s\n", |
| 46 | fdt_strerror(ret)); |
| 47 | return ret; |
| 48 | } |
| 49 | |
| 50 | /* Reserve IRQs that are used/needed by secure world */ |
| 51 | path = "/ocp/crossbar"; |
| 52 | offs = fdt_path_offset(fdt, path); |
| 53 | if (offs < 0) { |
| 54 | debug("Node %s not found.\n", path); |
| 55 | return 0; |
| 56 | } |
| 57 | |
| 58 | /* Get current entries */ |
| 59 | p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len); |
| 60 | if (p_data) |
| 61 | old_cnt = len / sizeof(u32); |
| 62 | else |
| 63 | old_cnt = 0; |
| 64 | |
| 65 | new_cnt = sizeof(hs_irq_skip) / |
| 66 | sizeof(hs_irq_skip[0]); |
| 67 | |
| 68 | /* Create new/updated skip list for HS parts */ |
| 69 | temp = malloc(sizeof(u32) * (old_cnt + new_cnt)); |
| 70 | for (i = 0; i < new_cnt; i++) |
| 71 | temp[i] = cpu_to_fdt32(hs_irq_skip[i]); |
| 72 | for (i = 0; i < old_cnt; i++) |
| 73 | temp[i + new_cnt] = p_data[i]; |
| 74 | |
| 75 | /* Blow away old data and set new data */ |
| 76 | fdt_delprop(fdt, offs, "ti,irqs-skip"); |
| 77 | ret = fdt_setprop(fdt, offs, "ti,irqs-skip", |
| 78 | temp, |
| 79 | (old_cnt + new_cnt) * sizeof(u32)); |
| 80 | free(temp); |
| 81 | |
| 82 | /* Check if the update worked */ |
| 83 | if (ret < 0) { |
| 84 | printf("Could not add ti,irqs-skip property to node %s: %s\n", |
| 85 | path, fdt_strerror(ret)); |
| 86 | return ret; |
| 87 | } |
| 88 | |
| 89 | return 0; |
| 90 | } |
| 91 | |
Daniel Allred | 1aad38f | 2016-05-19 19:10:53 -0500 | [diff] [blame] | 92 | #if ((TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ != 0) || \ |
| 93 | (CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ != 0)) |
| 94 | static int ft_hs_fixup_sram(void *fdt, bd_t *bd) |
| 95 | { |
| 96 | const char *path; |
| 97 | int offs; |
| 98 | int ret; |
| 99 | u32 temp[2]; |
| 100 | |
| 101 | /* |
| 102 | * Update SRAM reservations on secure devices. The OCMC RAM |
| 103 | * is always reserved for secure use from the start of that |
| 104 | * memory region |
| 105 | */ |
| 106 | path = "/ocp/ocmcram@40300000/sram-hs"; |
| 107 | offs = fdt_path_offset(fdt, path); |
| 108 | if (offs < 0) { |
| 109 | debug("Node %s not found.\n", path); |
| 110 | return 0; |
| 111 | } |
| 112 | |
| 113 | /* relative start offset */ |
| 114 | temp[0] = cpu_to_fdt32(0); |
| 115 | /* reservation size */ |
| 116 | temp[1] = cpu_to_fdt32(max(TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ, |
| 117 | CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ)); |
| 118 | fdt_delprop(fdt, offs, "reg"); |
| 119 | ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32)); |
| 120 | if (ret < 0) { |
| 121 | printf("Could not add reg property to node %s: %s\n", |
| 122 | path, fdt_strerror(ret)); |
| 123 | return ret; |
| 124 | } |
| 125 | |
| 126 | return 0; |
| 127 | } |
| 128 | #else |
| 129 | static int ft_hs_fixup_sram(void *fdt, bd_t *bd) { return 0; } |
| 130 | #endif |
| 131 | |
| 132 | static void ft_hs_fixups(void *fdt, bd_t *bd) |
| 133 | { |
| 134 | /* Check we are running on an HS/EMU device type */ |
| 135 | if (GP_DEVICE != get_device_type()) { |
| 136 | if ((ft_hs_fixup_crossbar(fdt, bd) == 0) && |
| 137 | (ft_hs_disable_rng(fdt, bd) == 0) && |
Daniel Allred | 6696139 | 2016-09-02 00:40:24 -0500 | [diff] [blame] | 138 | (ft_hs_fixup_sram(fdt, bd) == 0) && |
Andrew F. Davis | a8ff968 | 2016-11-29 16:33:24 -0600 | [diff] [blame] | 139 | (ft_hs_fixup_dram(fdt, bd) == 0) && |
| 140 | (ft_hs_add_tee(fdt, bd) == 0)) |
Daniel Allred | 1aad38f | 2016-05-19 19:10:53 -0500 | [diff] [blame] | 141 | return; |
| 142 | } else { |
| 143 | printf("ERROR: Incorrect device type (GP) detected!"); |
| 144 | } |
| 145 | /* Fixup failed or wrong device type */ |
| 146 | hang(); |
| 147 | } |
| 148 | #else |
| 149 | static void ft_hs_fixups(void *fdt, bd_t *bd) |
| 150 | { |
| 151 | } |
Daniel Allred | 6696139 | 2016-09-02 00:40:24 -0500 | [diff] [blame] | 152 | #endif /* #ifdef CONFIG_TI_SECURE_DEVICE */ |
Daniel Allred | 1aad38f | 2016-05-19 19:10:53 -0500 | [diff] [blame] | 153 | |
Suman Anna | 1b42ab3 | 2016-11-23 12:54:41 +0530 | [diff] [blame] | 154 | #if defined(CONFIG_TARGET_DRA7XX_EVM) || defined(CONFIG_TARGET_AM57XX_EVM) |
| 155 | #define OPP_DSP_CLK_NUM 3 |
| 156 | #define OPP_IVA_CLK_NUM 2 |
| 157 | #define OPP_GPU_CLK_NUM 2 |
| 158 | |
| 159 | const char *dra7_opp_dsp_clk_names[OPP_DSP_CLK_NUM] = { |
| 160 | "dpll_dsp_ck", |
| 161 | "dpll_dsp_m2_ck", |
| 162 | "dpll_dsp_m3x2_ck", |
| 163 | }; |
| 164 | |
| 165 | const char *dra7_opp_iva_clk_names[OPP_IVA_CLK_NUM] = { |
| 166 | "dpll_iva_ck", |
| 167 | "dpll_iva_m2_ck", |
| 168 | }; |
| 169 | |
| 170 | const char *dra7_opp_gpu_clk_names[OPP_GPU_CLK_NUM] = { |
| 171 | "dpll_gpu_ck", |
| 172 | "dpll_gpu_m2_ck", |
| 173 | }; |
| 174 | |
| 175 | /* DSPEVE voltage domain */ |
| 176 | u32 dra7_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = { |
| 177 | {}, /*OPP_LOW */ |
| 178 | {600000000, 600000000, 400000000}, /* OPP_NOM */ |
| 179 | {700000000, 700000000, 466666667}, /* OPP_OD */ |
| 180 | {750000000, 750000000, 500000000}, /* OPP_HIGH */ |
| 181 | }; |
| 182 | |
| 183 | /* IVA voltage domain */ |
| 184 | u32 dra7_opp_iva_clk_rates[NUM_OPPS][OPP_IVA_CLK_NUM] = { |
| 185 | {}, /* OPP_LOW */ |
| 186 | {1165000000, 388333334}, /* OPP_NOM */ |
| 187 | {860000000, 430000000}, /* OPP_OD */ |
| 188 | {1064000000, 532000000}, /* OPP_HIGH */ |
| 189 | }; |
| 190 | |
| 191 | /* GPU voltage domain */ |
| 192 | u32 dra7_opp_gpu_clk_rates[NUM_OPPS][OPP_GPU_CLK_NUM] = { |
| 193 | {}, /* OPP_LOW */ |
| 194 | {1277000000, 425666667}, /* OPP_NOM */ |
| 195 | {1000000000, 500000000}, /* OPP_OD */ |
| 196 | {1064000000, 532000000}, /* OPP_HIGH */ |
| 197 | }; |
| 198 | |
| 199 | static int ft_fixup_clocks(void *fdt, const char **names, u32 *rates, int num) |
| 200 | { |
| 201 | int offs, node_offs, ret, i; |
| 202 | uint32_t phandle; |
| 203 | |
Suman Anna | a517c1f | 2019-08-16 17:30:16 -0500 | [diff] [blame] | 204 | offs = fdt_path_offset(fdt, "/ocp/interconnect@4a000000/segment@0/target-module@5000/cm_core_aon@0/clocks"); |
| 205 | if (offs < 0) |
| 206 | offs = fdt_path_offset(fdt, "/ocp/l4@4a000000/cm_core_aon@5000/clocks"); |
Suman Anna | 1b42ab3 | 2016-11-23 12:54:41 +0530 | [diff] [blame] | 207 | if (offs < 0) { |
| 208 | debug("Could not find cm_core_aon clocks node path offset : %s\n", |
| 209 | fdt_strerror(offs)); |
| 210 | return offs; |
| 211 | } |
| 212 | |
| 213 | for (i = 0; i < num; i++) { |
| 214 | node_offs = fdt_subnode_offset(fdt, offs, names[i]); |
| 215 | if (node_offs < 0) { |
| 216 | debug("Could not find clock sub-node %s: %s\n", |
| 217 | names[i], fdt_strerror(node_offs)); |
| 218 | return offs; |
| 219 | } |
| 220 | |
| 221 | phandle = fdt_get_phandle(fdt, node_offs); |
| 222 | if (!phandle) { |
| 223 | debug("Could not find phandle for clock %s\n", |
| 224 | names[i]); |
| 225 | return -1; |
| 226 | } |
| 227 | |
| 228 | ret = fdt_setprop_u32(fdt, node_offs, "assigned-clocks", |
| 229 | phandle); |
| 230 | if (ret < 0) { |
| 231 | debug("Could not add assigned-clocks property to clock node %s: %s\n", |
| 232 | names[i], fdt_strerror(ret)); |
| 233 | return ret; |
| 234 | } |
| 235 | |
| 236 | ret = fdt_setprop_u32(fdt, node_offs, "assigned-clock-rates", |
| 237 | rates[i]); |
| 238 | if (ret < 0) { |
| 239 | debug("Could not add assigned-clock-rates property to clock node %s: %s\n", |
| 240 | names[i], fdt_strerror(ret)); |
| 241 | return ret; |
| 242 | } |
| 243 | } |
| 244 | |
| 245 | return 0; |
| 246 | } |
| 247 | |
| 248 | static void ft_opp_clock_fixups(void *fdt, bd_t *bd) |
| 249 | { |
| 250 | const char **clk_names; |
| 251 | u32 *clk_rates; |
| 252 | int ret; |
| 253 | |
| 254 | if (!is_dra72x() && !is_dra7xx()) |
| 255 | return; |
| 256 | |
| 257 | /* fixup DSP clocks */ |
| 258 | clk_names = dra7_opp_dsp_clk_names; |
| 259 | clk_rates = dra7_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)]; |
| 260 | ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_DSP_CLK_NUM); |
| 261 | if (ret) { |
| 262 | printf("ft_fixup_clocks failed for DSP voltage domain: %s\n", |
| 263 | fdt_strerror(ret)); |
| 264 | return; |
| 265 | } |
| 266 | |
| 267 | /* fixup IVA clocks */ |
| 268 | clk_names = dra7_opp_iva_clk_names; |
| 269 | clk_rates = dra7_opp_iva_clk_rates[get_voltrail_opp(VOLT_IVA)]; |
| 270 | ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_IVA_CLK_NUM); |
| 271 | if (ret) { |
| 272 | printf("ft_fixup_clocks failed for IVA voltage domain: %s\n", |
| 273 | fdt_strerror(ret)); |
| 274 | return; |
| 275 | } |
| 276 | |
| 277 | /* fixup GPU clocks */ |
| 278 | clk_names = dra7_opp_gpu_clk_names; |
| 279 | clk_rates = dra7_opp_gpu_clk_rates[get_voltrail_opp(VOLT_GPU)]; |
| 280 | ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_GPU_CLK_NUM); |
| 281 | if (ret) { |
| 282 | printf("ft_fixup_clocks failed for GPU voltage domain: %s\n", |
| 283 | fdt_strerror(ret)); |
| 284 | return; |
| 285 | } |
| 286 | } |
| 287 | #else |
| 288 | static void ft_opp_clock_fixups(void *fdt, bd_t *bd) { } |
| 289 | #endif /* CONFIG_TARGET_DRA7XX_EVM || CONFIG_TARGET_AM57XX_EVM */ |
| 290 | |
Daniel Allred | 1aad38f | 2016-05-19 19:10:53 -0500 | [diff] [blame] | 291 | /* |
| 292 | * Place for general cpu/SoC FDT fixups. Board specific |
| 293 | * fixups should remain in the board files which is where |
| 294 | * this function should be called from. |
| 295 | */ |
| 296 | void ft_cpu_setup(void *fdt, bd_t *bd) |
| 297 | { |
| 298 | ft_hs_fixups(fdt, bd); |
Suman Anna | 1b42ab3 | 2016-11-23 12:54:41 +0530 | [diff] [blame] | 299 | ft_opp_clock_fixups(fdt, bd); |
Daniel Allred | 1aad38f | 2016-05-19 19:10:53 -0500 | [diff] [blame] | 300 | } |