Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 0125bcf01cfb0715b35ab9d5325479b3953bb966 / . / drivers / net / Kconfig
blob: f52629fa53ffed56207c81a12a037cc42f7e2656 [file] [log] [blame]
Joe Hershberger05c3e682015-03-22 17:09:10 -0500[diff] [blame]1config DM_ETH
2 bool "Enable Driver Model for Ethernet drivers"
3 depends on DM
4 help
5 Enable driver model for Ethernet.
6
7 The eth_*() interface will be implemented by the UC_ETH class
8 This is currently implemented in net/eth.c
9 Look in include/net.h for details.
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]10
Bin Mengb68fe152015-08-27 22:25:58 -0700[diff] [blame]11config PHYLIB
12 bool "Ethernet PHY (physical media interface) support"
13 help
14 Enable Ethernet PHY (physical media interface) support.
15
Michael Haas525d1872016-03-25 18:22:50 +0100[diff] [blame]16config RTL8211X_PHY_FORCE_MASTER
17 bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
18 depends on PHYLIB
19 help
20 Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
21 This can work around link stability and data corruption issues on gigabit
22 links which can occur in slave mode on certain PHYs, e.g. on the
23 RTL8211C(L).
24
25 Please note that two directly connected devices (i.e. via crossover cable)
26 will not be able to establish a link between each other if they both force
27 master mode. Multiple devices forcing master mode when connected by a
28 network switch do not pose a problem as the switch configures its affected
29 ports into slave mode.
30
31 This option only affects gigabit links. If you must establish a direct
32 connection between two devices which both force master mode, try forcing
33 the link speed to 100MBit/s.
34
35 If unsure, say N.
36
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]37menuconfig NETDEVICES
38 bool "Network device support"
39 depends on NET
Joe Hershbergeref0f2f52015-06-22 16:15:30 -0500[diff] [blame]40 default y if DM_ETH
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]41 help
42 You must select Y to enable any network device support
43 Generally if you have any networking support this is a given
44
45 If unsure, say Y
46
47if NETDEVICES
48
Marek Vasute40095f2016-05-24 23:29:09 +0200[diff] [blame]49config AG7XXX
50 bool "Atheros AG7xxx Ethernet MAC support"
51 depends on DM_ETH && ARCH_ATH79
52 select PHYLIB
53 help
54 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
55 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
56
57
Thomas Chou96fa1e42015-10-22 15:29:11 +0800[diff] [blame]58config ALTERA_TSE
59 bool "Altera Triple-Speed Ethernet MAC support"
60 depends on DM_ETH
61 select PHYLIB
62 help
63 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
64 Please find details on the "Triple-Speed Ethernet MegaCore Function
65 Resource Center" of Altera.
66
Stephen Warrenba4dfef2016-10-21 14:46:47 -0600[diff] [blame]67config DWC_ETH_QOS
68 bool "Synopsys DWC Ethernet QOS device support"
69 depends on DM_ETH
70 select PHYLIB
71 help
72 This driver supports the Synopsys Designware Ethernet QOS (Quality
73 Of Service) IP block. The IP supports many options for bus type,
74 clocking/reset structure, and feature list. This driver currently
75 supports the specific configuration used in NVIDIA's Tegra186 chip,
76 but should be extensible to other combinations quite easily.
77
Simon Glassc294ac52015-08-19 09:33:41 -0600[diff] [blame]78config E1000
79 bool "Intel PRO/1000 Gigabit Ethernet support"
80 help
81 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
82 adapters. For more information on how to identify your adapter, go
83 to the Adapter & Driver ID Guide at:
84
85 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
86
87config E1000_SPI_GENERIC
88 bool "Allow access to the Intel 8257x SPI bus"
89 depends on E1000
90 help
91 Allow generic access to the SPI bus on the Intel 8257x, for
92 example with the "sspi" command.
93
94config E1000_SPI
95 bool "Enable SPI bus utility code"
96 depends on E1000
97 help
98 Utility code for direct access to the SPI bus on Intel 8257x.
99 This does not do anything useful unless you set at least one
100 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
101
102config CMD_E1000
103 bool "Enable the e1000 command"
104 depends on E1000
105 help
106 This enables the 'e1000' management command for E1000 devices. When
107 used on devices with SPI support you can reprogram the EEPROM from
108 U-Boot.
109
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]110config ETH_SANDBOX
111 depends on DM_ETH && SANDBOX
112 default y
113 bool "Sandbox: Mocked Ethernet driver"
114 help
115 This driver simply responds with fake ARP replies and ping
116 replies that are used to verify network stack functionality
117
118 This driver is particularly useful in the test/dm/eth.c tests
119
Joe Hershbergera346ca72015-03-22 17:09:21 -0500[diff] [blame]120config ETH_SANDBOX_RAW
121 depends on DM_ETH && SANDBOX
122 default y
123 bool "Sandbox: Bridge to Linux Raw Sockets"
124 help
125 This driver is a bridge from the bottom of the network stack
126 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
127 network traffic to be tested from within sandbox. See
128 board/sandbox/README.sandbox for more details.
129
Simon Glassef48f6d2015-04-05 16:07:34 -0600[diff] [blame]130config ETH_DESIGNWARE
131 bool "Synopsys Designware Ethernet MAC"
Thomas Chou25af71c2015-12-07 20:53:29 +0800[diff] [blame]132 select PHYLIB
Simon Glassef48f6d2015-04-05 16:07:34 -0600[diff] [blame]133 help
134 This MAC is present in SoCs from various vendors. It supports
135 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
136 provide the PHY (physical media interface).
137
Max Filippovf0727122016-08-05 18:26:15 +0300[diff] [blame]138config ETHOC
139 bool "OpenCores 10/100 Mbps Ethernet MAC"
140 help
141 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
142
Jagan Teki97d29ca2016-10-08 18:00:12 +0530[diff] [blame]143config FEC_MXC
144 bool "FEC Ethernet controller"
Patrick Bruenn98d62e62016-11-04 11:57:02 +0100[diff] [blame]145 depends on MX5 || MX6
Jagan Teki97d29ca2016-10-08 18:00:12 +0530[diff] [blame]146 help
147 This driver supports the 10/100 Fast Ethernet controller for
148 NXP i.MX processors.
149
Stefan Roese99d4c6d2016-02-10 07:22:10 +0100[diff] [blame]150config MVPP2
151 bool "Marvell Armada 375 network interface support"
152 depends on ARMADA_375
153 select PHYLIB
154 help
155 This driver supports the network interface units in the
156 Marvell ARMADA 375 SoC.
157
Bin Mengb68fe152015-08-27 22:25:58 -0700[diff] [blame]158config PCH_GBE
159 bool "Intel Platform Controller Hub EG20T GMAC driver"
160 depends on DM_ETH && DM_PCI
161 select PHYLIB
162 help
163 This MAC is present in Intel Platform Controller Hub EG20T. It
164 supports 10/100/1000 Mbps operation.
165
Bin Meng86e9dc82016-03-21 06:47:41 -0700[diff] [blame]166config RTL8139
167 bool "Realtek 8139 series Ethernet controller driver"
168 help
169 This driver supports Realtek 8139 series fast ethernet family of
170 PCI chipsets/adapters.
171
Bin Meng0764f242016-03-21 06:47:42 -0700[diff] [blame]172config RTL8169
173 bool "Realtek 8169 series Ethernet controller driver"
174 help
175 This driver supports Realtek 8169 series gigabit ethernet family of
176 PCI/PCIe chipsets/adapters.
177
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530[diff] [blame]178config SUN8I_EMAC
179 bool "Allwinner Sun8i Ethernet MAC support"
180 depends on DM_ETH
181 select PHYLIB
182 help
183 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
184 It can be found in H3/A64/A83T based SoCs and compatible with both
185 External and Internal PHY's.
186
Michal Simek338a5f22015-12-09 16:54:42 +0100[diff] [blame]187config XILINX_AXIEMAC
188 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
189 select PHYLIB
190 select MII
191 bool "Xilinx AXI Ethernet"
192 help
193 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
194
Michal Simek3229c862015-12-11 09:41:49 +0100[diff] [blame]195config XILINX_EMACLITE
Zubair Lutfullah Kakakhel2f1f05f2016-07-27 12:25:09 +0100[diff] [blame]196 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
Michal Simek3229c862015-12-11 09:41:49 +0100[diff] [blame]197 select PHYLIB
198 select MII
199 bool "Xilinx Ethernetlite"
200 help
201 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
202
Michal Simek596e5782015-11-30 14:34:52 +0100[diff] [blame]203config ZYNQ_GEM
204 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
Michal Simek7bccc752015-12-11 09:14:31 +0100[diff] [blame]205 select PHYLIB
Michal Simek596e5782015-11-30 14:34:52 +0100[diff] [blame]206 bool "Xilinx Ethernet GEM"
207 help
Michal Simekc9428102015-12-09 16:53:52 +0100[diff] [blame]208 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
Michal Simek596e5782015-11-30 14:34:52 +0100[diff] [blame]209
Purna Chandra Mandal23e75782016-01-28 15:30:21 +0530[diff] [blame]210config PIC32_ETH
211 bool "Microchip PIC32 Ethernet Support"
212 depends on DM_ETH && MACH_PIC32
213 select PHYLIB
214 help
215 This driver implements 10/100 Mbps Ethernet and MAC layer for
216 Microchip PIC32 microcontrollers.
217
Sjoerd Simons0125bcf2017-01-11 11:46:11 +0100[diff] [blame^]218config GMAC_ROCKCHIP
219 bool "Rockchip Synopsys Designware Ethernet MAC"
220 depends on DM_ETH && ETH_DESIGNWARE
221 help
222 This driver provides Rockchip SoCs network support based on the
223 Synopsys Designware driver.
224
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500[diff] [blame]225endif # NETDEVICES