blob: ecff60d59f90f1893b21579876609c823b99490d [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
wdenk04a85b32004-04-15 18:22:41 +00002 * (C) Copyright 2000-2004
wdenkc6097192002-11-03 00:24:07 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
wdenkc6097192002-11-03 00:24:07 +00006 */
7
8/*
9 * The purpose of this code is to signal the operational status of a
10 * target which usually boots over the network; while running in
11 * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
12 * message has been received, the LED is turned off. The Linux
13 * kernel, once it is running, will start blinking the LED again,
14 * with another frequency.
15 */
16
17#ifndef _STATUS_LED_H_
18#define _STATUS_LED_H_
19
20#ifdef CONFIG_STATUS_LED
21
22#define STATUS_LED_OFF 0
23#define STATUS_LED_BLINKING 1
24#define STATUS_LED_ON 2
25
26void status_led_tick (unsigned long timestamp);
27void status_led_set (int led, int state);
28
29/***** TQM8xxL ********************************************************/
Wolfgang Denk77efe352010-09-19 21:28:25 +020030#if defined(CONFIG_TQM8xxL)
wdenkc6097192002-11-03 00:24:07 +000031# define STATUS_LED_PAR im_cpm.cp_pbpar
32# define STATUS_LED_DIR im_cpm.cp_pbdir
33# define STATUS_LED_ODR im_cpm.cp_pbodr
34# define STATUS_LED_DAT im_cpm.cp_pbdat
35
36# define STATUS_LED_BIT 0x00000001
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020037# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
wdenkc6097192002-11-03 00:24:07 +000038# define STATUS_LED_STATE STATUS_LED_BLINKING
39
40# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
41
42# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
43
44/***** MVS v1 **********************************************************/
45#elif (defined(CONFIG_MVS) && CONFIG_MVS < 2)
46# define STATUS_LED_PAR im_ioport.iop_pdpar
47# define STATUS_LED_DIR im_ioport.iop_pddir
48# undef STATUS_LED_ODR
49# define STATUS_LED_DAT im_ioport.iop_pddat
50
51# define STATUS_LED_BIT 0x00000001
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020052# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
wdenkc6097192002-11-03 00:24:07 +000053# define STATUS_LED_STATE STATUS_LED_BLINKING
54
55# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
56
57# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
58
wdenkc6097192002-11-03 00:24:07 +000059/***** GEN860T *********************************************************/
60#elif defined(CONFIG_GEN860T)
61
62# define STATUS_LED_PAR im_ioport.iop_papar
63# define STATUS_LED_DIR im_ioport.iop_padir
64# define STATUS_LED_ODR im_ioport.iop_paodr
65# define STATUS_LED_DAT im_ioport.iop_padat
66
67# define STATUS_LED_BIT 0x0800 /* Red LED 0 is on PA.4 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020068# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
wdenk7aa78612003-05-03 15:50:43 +000069# define STATUS_LED_STATE STATUS_LED_OFF
wdenkc6097192002-11-03 00:24:07 +000070# define STATUS_LED_BIT1 0x0400 /* Grn LED 1 is on PA.5 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020071# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 8)
wdenkc6097192002-11-03 00:24:07 +000072# define STATUS_LED_STATE1 STATUS_LED_BLINKING
73# define STATUS_LED_BIT2 0x0080 /* Red LED 2 is on PA.8 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020074# define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 4)
wdenk7aa78612003-05-03 15:50:43 +000075# define STATUS_LED_STATE2 STATUS_LED_OFF
wdenkc6097192002-11-03 00:24:07 +000076# define STATUS_LED_BIT3 0x0040 /* Grn LED 3 is on PA.9 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020077# define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 4)
wdenk7aa78612003-05-03 15:50:43 +000078# define STATUS_LED_STATE3 STATUS_LED_OFF
wdenkc6097192002-11-03 00:24:07 +000079
80# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
wdenk7aa78612003-05-03 15:50:43 +000081# define STATUS_LED_BOOT 1 /* Boot status on LED 1 */
wdenkc6097192002-11-03 00:24:07 +000082
83/***** IVMS8 **********************************************************/
84#elif defined(CONFIG_IVMS8)
85
86# define STATUS_LED_PAR im_cpm.cp_pbpar
87# define STATUS_LED_DIR im_cpm.cp_pbdir
88# define STATUS_LED_ODR im_cpm.cp_pbodr
89# define STATUS_LED_DAT im_cpm.cp_pbdat
90
91# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020092# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ)
wdenkc6097192002-11-03 00:24:07 +000093# define STATUS_LED_STATE STATUS_LED_OFF
94# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020095# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ)
wdenkc6097192002-11-03 00:24:07 +000096# define STATUS_LED_STATE1 STATUS_LED_OFF
97/* IDE LED usable for other purposes, too */
98# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ)
wdenkc6097192002-11-03 00:24:07 +0000100# define STATUS_LED_STATE2 STATUS_LED_OFF
101
102# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
103
104# define STATUS_ILOCK_SWITCH 0x00800000 /* ILOCK switch in IRQ4 */
105
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200106# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */
wdenkc6097192002-11-03 00:24:07 +0000107
108# define STATUS_LED_YELLOW 0
109# define STATUS_LED_GREEN 1
110# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
111
112/***** IVML24 *********************************************************/
113#elif defined(CONFIG_IVML24)
114
115# define STATUS_LED_PAR im_cpm.cp_pbpar
116# define STATUS_LED_DIR im_cpm.cp_pbdir
117# define STATUS_LED_ODR im_cpm.cp_pbodr
118# define STATUS_LED_DAT im_cpm.cp_pbdat
119
120# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200121# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ)
wdenkc6097192002-11-03 00:24:07 +0000122# define STATUS_LED_STATE STATUS_LED_OFF
123# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ)
wdenkc6097192002-11-03 00:24:07 +0000125# define STATUS_LED_STATE1 STATUS_LED_OFF
126/* IDE LED usable for other purposes, too */
127# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200128# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ)
wdenkc6097192002-11-03 00:24:07 +0000129# define STATUS_LED_STATE2 STATUS_LED_OFF
130
131# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
132
133# define STATUS_ILOCK_SWITCH 0x00004000 /* ILOCK is on PB.17 */
134
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200135# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */
wdenkc6097192002-11-03 00:24:07 +0000136
137# define STATUS_LED_YELLOW 0
138# define STATUS_LED_GREEN 1
139# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
140
wdenkc6097192002-11-03 00:24:07 +0000141/***** ICU862 ********************************************************/
142#elif defined(CONFIG_ICU862)
143
144# define STATUS_LED_PAR im_ioport.iop_papar
145# define STATUS_LED_DIR im_ioport.iop_padir
146# define STATUS_LED_ODR im_ioport.iop_paodr
147# define STATUS_LED_DAT im_ioport.iop_padat
148
149# define STATUS_LED_BIT 0x4000 /* LED 0 is on PA.1 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
wdenkc6097192002-11-03 00:24:07 +0000151# define STATUS_LED_STATE STATUS_LED_BLINKING
152# define STATUS_LED_BIT1 0x1000 /* LED 1 is on PA.3 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ)
wdenkc6097192002-11-03 00:24:07 +0000154# define STATUS_LED_STATE1 STATUS_LED_OFF
155
156# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
157
158# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
159
160/***** Someone else defines these *************************************/
161#elif defined(STATUS_LED_PAR)
162
163 /*
164 * ADVICE: Define in your board configuration file rather than
165 * filling this file up with lots of custom board stuff.
166 */
167
168/***** NetVia ********************************************************/
169#elif defined(CONFIG_NETVIA)
170
wdenk993cad92003-06-26 22:04:09 +0000171#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
172
wdenkc6097192002-11-03 00:24:07 +0000173#define STATUS_LED_PAR im_ioport.iop_pdpar
174#define STATUS_LED_DIR im_ioport.iop_pddir
175#undef STATUS_LED_ODR
176#define STATUS_LED_DAT im_ioport.iop_pddat
177
178# define STATUS_LED_BIT 0x0080 /* PD.8 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200179# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
wdenkc6097192002-11-03 00:24:07 +0000180# define STATUS_LED_STATE STATUS_LED_BLINKING
181
182# define STATUS_LED_BIT1 0x0040 /* PD.9 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200183# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
wdenkc6097192002-11-03 00:24:07 +0000184# define STATUS_LED_STATE1 STATUS_LED_OFF
185
186# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
187# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
188
wdenk993cad92003-06-26 22:04:09 +0000189#endif
wdenk56f94be2002-11-05 16:35:14 +0000190
wdenk0db5bca2003-03-31 17:27:09 +0000191/***** CMI ********************************************************/
192#elif defined(CONFIG_CMI)
wdenk8bde7f72003-06-27 21:31:46 +0000193# define STATUS_LED_DIR im_mios.mios_mpiosm32ddr
194# define STATUS_LED_DAT im_mios.mios_mpiosm32dr
wdenk0db5bca2003-03-31 17:27:09 +0000195
196# define STATUS_LED_BIT 0x2000 /* Select one of the 16 possible*/
197 /* MIOS outputs */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* Blinking periode is 500 ms */
wdenk0db5bca2003-03-31 17:27:09 +0000199# define STATUS_LED_STATE STATUS_LED_BLINKING
200
201# define STATUS_LED_ACTIVE 1 /* LED on for bit == 0 */
202# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
203
wdenk0608e042004-03-25 19:29:38 +0000204/***** KUP4K, KUP4X ****************************************************/
Wolfgang Denkdff07e12010-10-05 22:54:54 +0200205#elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
wdenk56f94be2002-11-05 16:35:14 +0000206
207# define STATUS_LED_PAR im_ioport.iop_papar
208# define STATUS_LED_DIR im_ioport.iop_padir
209# define STATUS_LED_ODR im_ioport.iop_paodr
210# define STATUS_LED_DAT im_ioport.iop_padat
211
212# define STATUS_LED_BIT 0x00000300 /* green + red PA[8]=yellow, PA[7]=red, PA[6]=green */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200213# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
wdenk56f94be2002-11-05 16:35:14 +0000214# define STATUS_LED_STATE STATUS_LED_BLINKING
215
216# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
217
218# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
219
wdenkdc7c9a12003-03-26 06:55:25 +0000220#elif defined(CONFIG_SVM_SC8xx)
221# define STATUS_LED_PAR im_cpm.cp_pbpar
222# define STATUS_LED_DIR im_cpm.cp_pbdir
223# define STATUS_LED_ODR im_cpm.cp_pbodr
224# define STATUS_LED_DAT im_cpm.cp_pbdat
225
226# define STATUS_LED_BIT 0x00000001
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200227# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
wdenkdc7c9a12003-03-26 06:55:25 +0000228# define STATUS_LED_STATE STATUS_LED_BLINKING
229
230# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
231
232# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
233
wdenk682011f2003-06-03 23:54:09 +0000234/***** RBC823 ********************************************************/
235#elif defined(CONFIG_RBC823)
236
237# define STATUS_LED_PAR im_ioport.iop_pcpar
238# define STATUS_LED_DIR im_ioport.iop_pcdir
239# undef STATUS_LED_ODR
240# define STATUS_LED_DAT im_ioport.iop_pcdat
241
242# define STATUS_LED_BIT 0x0002 /* LED 0 is on PC.14 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200243# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
wdenk682011f2003-06-03 23:54:09 +0000244# define STATUS_LED_STATE STATUS_LED_BLINKING
245# define STATUS_LED_BIT1 0x0004 /* LED 1 is on PC.13 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200246# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ)
wdenk682011f2003-06-03 23:54:09 +0000247# define STATUS_LED_STATE1 STATUS_LED_OFF
248
249# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
250
251# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
252
wdenk04a85b32004-04-15 18:22:41 +0000253/***** NetPhone ********************************************************/
wdenk79fa88f2004-06-07 23:46:25 +0000254#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
wdenk04a85b32004-04-15 18:22:41 +0000255/* XXX empty just to avoid the error */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200256/***** STx XTc ********************************************************/
257#elif defined(CONFIG_STXXTC)
258/* XXX empty just to avoid the error */
wdenkc6097192002-11-03 00:24:07 +0000259/************************************************************************/
Bartlomiej Sieka4707fb52006-10-13 21:09:09 +0200260#elif defined(CONFIG_V38B)
261
262# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200263# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
Bartlomiej Sieka4707fb52006-10-13 21:09:09 +0200264# define STATUS_LED_STATE STATUS_LED_BLINKING
265
266# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
267# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
268
Bartlomiej Siekaa11c0b82007-05-27 16:51:48 +0200269#elif defined(CONFIG_MOTIONPRO)
270
271#define STATUS_LED_BIT ((vu_long *) MPC5XXX_GPT6_ENABLE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200272#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10)
Bartlomiej Siekaa11c0b82007-05-27 16:51:48 +0200273#define STATUS_LED_STATE STATUS_LED_BLINKING
274
275#define STATUS_LED_BIT1 ((vu_long *) MPC5XXX_GPT7_ENABLE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200276#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10)
Bartlomiej Siekaa11c0b82007-05-27 16:51:48 +0200277#define STATUS_LED_STATE1 STATUS_LED_OFF
278
279#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
280
Heiko Schocher566a4942007-06-22 19:11:54 +0200281#elif defined(CONFIG_BOARD_SPECIFIC_LED)
282/* led_id_t is unsigned long mask */
283typedef unsigned long led_id_t;
284
285extern void __led_toggle (led_id_t mask);
286extern void __led_init (led_id_t mask, int state);
287extern void __led_set (led_id_t mask, int state);
wdenkc6097192002-11-03 00:24:07 +0000288#else
289# error Status LED configuration missing
290#endif
291/************************************************************************/
292
wdenk48b42612003-06-19 23:01:32 +0000293#ifndef CONFIG_BOARD_SPECIFIC_LED
294# include <asm/status_led.h>
295#endif
296
Wolfgang Denkde74b9e2007-10-13 21:15:39 +0200297/*
Peter Pearsebd862202007-09-18 13:07:54 +0100298 * Coloured LEDs API
Wolfgang Denkde74b9e2007-10-13 21:15:39 +0200299 */
Peter Pearsebd862202007-09-18 13:07:54 +0100300#ifndef __ASSEMBLY__
301extern void coloured_LED_init (void);
Jason Kridner2d3be7c2011-09-04 14:40:16 -0400302extern void red_led_on(void);
303extern void red_led_off(void);
304extern void green_led_on(void);
305extern void green_led_off(void);
306extern void yellow_led_on(void);
307extern void yellow_led_off(void);
308extern void blue_led_on(void);
309extern void blue_led_off(void);
Peter Pearsebd862202007-09-18 13:07:54 +0100310#else
311 .extern LED_init
Jason Kridner2d3be7c2011-09-04 14:40:16 -0400312 .extern red_led_on
313 .extern red_led_off
314 .extern yellow_led_on
315 .extern yellow_led_off
316 .extern green_led_on
317 .extern green_led_off
318 .extern blue_led_on
319 .extern blue_led_off
Peter Pearsebd862202007-09-18 13:07:54 +0100320#endif
321
wdenkc6097192002-11-03 00:24:07 +0000322#endif /* CONFIG_STATUS_LED */
323
324#endif /* _STATUS_LED_H_ */