blob: e92132ad19a18b9cdb72b2f15b230ec73acc1400 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Stefan Roesea4884832014-10-22 12:13:19 +02002/*
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
Stefan Roesea4884832014-10-22 12:13:19 +02004 */
5
6#include <common.h>
Simon Glass691d7192020-05-10 11:40:02 -06007#include <init.h>
Stefan Roesea4884832014-10-22 12:13:19 +02008#include <miiphy.h>
Simon Glass401d1c42020-10-30 21:38:53 -06009#include <asm/global_data.h>
Stefan Roesea4884832014-10-22 12:13:19 +020010#include <asm/io.h>
11#include <asm/arch/cpu.h>
12#include <asm/arch/soc.h>
13#include <linux/mbus.h>
14
Stefan Roese29b103c2015-04-20 09:28:12 +020015#include "../drivers/ddr/marvell/axp/ddr3_hw_training.h"
16#include "../arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h"
Stefan Roesee7778ec2015-01-19 11:33:47 +010017
Stefan Roesea4884832014-10-22 12:13:19 +020018DECLARE_GLOBAL_DATA_PTR;
19
20/* Base addresses for the external device chip selects */
21#define DEV_CS0_BASE 0xe0000000
22#define DEV_CS1_BASE 0xe1000000
23#define DEV_CS2_BASE 0xe2000000
24#define DEV_CS3_BASE 0xe3000000
25
Stefan Roesee7778ec2015-01-19 11:33:47 +010026/* DDR3 static configuration */
27MV_DRAM_MC_INIT ddr3_b0_maxbcm[MV_MAX_DDR3_STATIC_SIZE] = {
28 {0x00001400, 0x7301CC30}, /* DDR SDRAM Configuration Register */
29 {0x00001404, 0x30000820}, /* Dunit Control Low Register */
30 {0x00001408, 0x5515BAAB}, /* DDR SDRAM Timing (Low) Register */
31 {0x0000140C, 0x38DA3F97}, /* DDR SDRAM Timing (High) Register */
32 {0x00001410, 0x20100005}, /* DDR SDRAM Address Control Register */
33 {0x00001414, 0x0000F3FF}, /* DDR SDRAM Open Pages Control Reg */
34 {0x00001418, 0x00000e00}, /* DDR SDRAM Operation Register */
35 {0x0000141C, 0x00000672}, /* DDR SDRAM Mode Register */
36 {0x00001420, 0x00000004}, /* DDR SDRAM Extended Mode Register */
37 {0x00001424, 0x0000F3FF}, /* Dunit Control High Register */
38 {0x00001428, 0x0011A940}, /* Dunit Control High Register */
39 {0x0000142C, 0x014C5134}, /* Dunit Control High Register */
40 {0x0000147C, 0x0000D771},
41
42 {0x00001494, 0x00010000}, /* DDR SDRAM ODT Control (Low) Reg */
43 {0x0000149C, 0x00000001}, /* DDR Dunit ODT Control Register */
44 {0x000014A0, 0x00000001},
45 {0x000014A8, 0x00000101},
46
47 /* Recommended Settings from Marvell for 4 x 16 bit devices: */
48 {0x000014C0, 0x192424C9}, /* DRAM addr and Ctrl Driving Strenght*/
49 {0x000014C4, 0xAAA24C9}, /* DRAM Data and DQS Driving Strenght */
50
51 /*
52 * DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the
53 * training sequence
54 */
55 {0x000200e8, 0x3FFF0E01},
56 {0x00020184, 0x3FFFFFE0}, /* Close fast path Window to - 2G */
57
58 {0x0001504, 0x3FFFFFE1}, /* CS0 Size */
59 {0x000150C, 0x00000000}, /* CS1 Size */
60 {0x0001514, 0x00000000}, /* CS2 Size */
61 {0x000151C, 0x00000000}, /* CS3 Size */
62
63 {0x0020220, 0x00000007}, /* Reserved */
64
65 {0x00001538, 0x0000000B}, /* Read Data Sample Delays Register */
66 {0x0000153C, 0x0000000B}, /* Read Data Ready Delay Register */
67
68 {0x000015D0, 0x00000670}, /* MR0 */
69 {0x000015D4, 0x00000044}, /* MR1 */
70 {0x000015D8, 0x00000018}, /* MR2 */
71 {0x000015DC, 0x00000000}, /* MR3 */
72 {0x000015E0, 0x00000001},
73 {0x000015E4, 0x00203c18}, /* ZQDS Configuration Register */
74 {0x000015EC, 0xF800A225}, /* DDR PHY */
75
76 {0x0, 0x0}
77};
78
79MV_DRAM_MODES maxbcm_ddr_modes[MV_DDR3_MODES_NUMBER] = {
80 {"maxbcm_1600-800", 0xB, 0x5, 0x0, A0, ddr3_b0_maxbcm, NULL},
81};
82
83extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[];
84
85/* MAXBCM: SERDES 0-4 PCIE, Serdes 7 = SGMII 0, all others = unconnected */
86MV_BIN_SERDES_CFG maxbcm_serdes_cfg[] = {
87 { MV_PEX_ROOT_COMPLEX, 0x20011111, 0x00000000,
88 { PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_DISABLED,
89 PEX_BUS_DISABLED },
90 0x1f, serdes_change_m_phy
91 }
92};
93
94MV_DRAM_MODES *ddr3_get_static_ddr_mode(void)
95{
96 /* Only one mode supported for this board */
97 return &maxbcm_ddr_modes[0];
98}
99
Stefan Roese0a590242019-04-08 14:51:49 +0200100MV_BIN_SERDES_CFG *board_serdes_cfg_get(void)
Stefan Roesee7778ec2015-01-19 11:33:47 +0100101{
102 return &maxbcm_serdes_cfg[0];
103}
Stefan Roesea4884832014-10-22 12:13:19 +0200104
105int board_early_init_f(void)
106{
107 /*
108 * Don't configure MPP (pin multiplexing) and GPIO here,
109 * its already done in bin_hdr
110 */
111
112 /*
113 * Setup some board specific mbus address windows
114 */
115 mbus_dt_setup_win(&mbus_state, DEV_CS0_BASE, 16 << 20,
116 CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_DEV_CS0);
117 mbus_dt_setup_win(&mbus_state, DEV_CS1_BASE, 16 << 20,
118 CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_DEV_CS1);
119 mbus_dt_setup_win(&mbus_state, DEV_CS2_BASE, 16 << 20,
120 CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_DEV_CS2);
121 mbus_dt_setup_win(&mbus_state, DEV_CS3_BASE, 16 << 20,
122 CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_DEV_CS3);
123
124 return 0;
125}
126
127int board_init(void)
128{
129 /* adress of boot parameters */
130 gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
131
132 return 0;
133}
134
135int checkboard(void)
136{
137 puts("Board: maxBCM\n");
138
139 return 0;
140}
141
Stefan Roesea4884832014-10-22 12:13:19 +0200142/* Configure and enable MV88E6185 switch */
Stefan Roesee3b9c982015-11-19 07:46:15 +0100143int board_phy_config(struct phy_device *phydev)
Stefan Roesea4884832014-10-22 12:13:19 +0200144{
Stefan Roesee3b9c982015-11-19 07:46:15 +0100145 /*
146 * todo:
147 * Fill this with the real setup / config code.
148 * Please see board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
149 * for details.
150 */
151 printf("88E6185 Initialized\n");
152 return 0;
Stefan Roesea4884832014-10-22 12:13:19 +0200153}