Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Common dtsi for AM62x SK and derivatives |
| 4 | * |
| 5 | * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/leds/common.h> |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | #include <dt-bindings/net/ti-dp83867.h> |
| 11 | #include "k3-am625.dtsi" |
| 12 | |
| 13 | / { |
| 14 | aliases { |
| 15 | serial2 = &main_uart0; |
| 16 | mmc0 = &sdhci0; |
| 17 | mmc1 = &sdhci1; |
| 18 | mmc2 = &sdhci2; |
| 19 | spi0 = &ospi0; |
| 20 | ethernet0 = &cpsw_port1; |
| 21 | ethernet1 = &cpsw_port2; |
| 22 | usb0 = &usb0; |
| 23 | usb1 = &usb1; |
| 24 | }; |
| 25 | |
| 26 | chosen { |
| 27 | stdout-path = "serial2:115200n8"; |
| 28 | }; |
| 29 | |
| 30 | memory@80000000 { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 31 | bootph-pre-ram; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 32 | device_type = "memory"; |
| 33 | /* 2G RAM */ |
| 34 | reg = <0x00000000 0x80000000 0x00000000 0x80000000>; |
| 35 | }; |
| 36 | |
| 37 | reserved-memory { |
| 38 | #address-cells = <2>; |
| 39 | #size-cells = <2>; |
| 40 | ranges; |
| 41 | |
| 42 | ramoops@9ca00000 { |
| 43 | compatible = "ramoops"; |
| 44 | reg = <0x00 0x9ca00000 0x00 0x00100000>; |
| 45 | record-size = <0x8000>; |
| 46 | console-size = <0x8000>; |
| 47 | ftrace-size = <0x00>; |
| 48 | pmsg-size = <0x8000>; |
| 49 | }; |
| 50 | |
| 51 | secure_tfa_ddr: tfa@9e780000 { |
| 52 | reg = <0x00 0x9e780000 0x00 0x80000>; |
| 53 | alignment = <0x1000>; |
| 54 | no-map; |
| 55 | }; |
| 56 | |
| 57 | secure_ddr: optee@9e800000 { |
| 58 | reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ |
| 59 | alignment = <0x1000>; |
| 60 | no-map; |
| 61 | }; |
| 62 | |
| 63 | wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { |
| 64 | compatible = "shared-dma-pool"; |
| 65 | reg = <0x00 0x9db00000 0x00 0xc00000>; |
| 66 | no-map; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | leds { |
| 71 | compatible = "gpio-leds"; |
| 72 | pinctrl-names = "default"; |
| 73 | pinctrl-0 = <&usr_led_pins_default>; |
| 74 | |
| 75 | led-0 { |
| 76 | label = "am62-sk:green:heartbeat"; |
| 77 | gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; |
| 78 | linux,default-trigger = "heartbeat"; |
| 79 | function = LED_FUNCTION_HEARTBEAT; |
| 80 | default-state = "off"; |
| 81 | }; |
| 82 | }; |
| 83 | |
| 84 | tlv320_mclk: clk-0 { |
| 85 | #clock-cells = <0>; |
| 86 | compatible = "fixed-clock"; |
| 87 | clock-frequency = <12288000>; |
| 88 | }; |
| 89 | |
| 90 | codec_audio: sound { |
| 91 | compatible = "simple-audio-card"; |
| 92 | simple-audio-card,name = "AM62x-SKEVM"; |
| 93 | simple-audio-card,widgets = |
| 94 | "Headphone", "Headphone Jack", |
| 95 | "Line", "Line In", |
| 96 | "Microphone", "Microphone Jack"; |
| 97 | simple-audio-card,routing = |
| 98 | "Headphone Jack", "HPLOUT", |
| 99 | "Headphone Jack", "HPROUT", |
| 100 | "LINE1L", "Line In", |
| 101 | "LINE1R", "Line In", |
| 102 | "MIC3R", "Microphone Jack", |
| 103 | "Microphone Jack", "Mic Bias"; |
| 104 | simple-audio-card,format = "dsp_b"; |
| 105 | simple-audio-card,bitclock-master = <&sound_master>; |
| 106 | simple-audio-card,frame-master = <&sound_master>; |
| 107 | simple-audio-card,bitclock-inversion; |
| 108 | |
| 109 | simple-audio-card,cpu { |
| 110 | sound-dai = <&mcasp1>; |
| 111 | }; |
| 112 | |
| 113 | sound_master: simple-audio-card,codec { |
| 114 | sound-dai = <&tlv320aic3106>; |
| 115 | clocks = <&tlv320_mclk>; |
| 116 | }; |
| 117 | }; |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 118 | |
| 119 | hdmi0: connector-hdmi { |
| 120 | compatible = "hdmi-connector"; |
| 121 | label = "hdmi"; |
| 122 | type = "a"; |
| 123 | port { |
| 124 | hdmi_connector_in: endpoint { |
| 125 | remote-endpoint = <&sii9022_out>; |
| 126 | }; |
| 127 | }; |
| 128 | }; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 129 | }; |
| 130 | |
| 131 | &main_pmx0 { |
| 132 | /* First pad number is ALW package and second is AMC package */ |
| 133 | main_uart0_pins_default: main-uart0-default-pins { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 134 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 135 | pinctrl-single,pins = < |
| 136 | AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */ |
| 137 | AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */ |
| 138 | >; |
| 139 | }; |
| 140 | |
| 141 | main_uart1_pins_default: main-uart1-default-pins { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 142 | bootph-pre-ram; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 143 | pinctrl-single,pins = < |
| 144 | AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */ |
| 145 | AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */ |
| 146 | AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */ |
| 147 | AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */ |
| 148 | >; |
| 149 | }; |
| 150 | |
| 151 | main_i2c0_pins_default: main-i2c0-default-pins { |
| 152 | pinctrl-single,pins = < |
| 153 | AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */ |
| 154 | AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */ |
| 155 | >; |
| 156 | }; |
| 157 | |
| 158 | main_i2c1_pins_default: main-i2c1-default-pins { |
| 159 | pinctrl-single,pins = < |
| 160 | AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */ |
| 161 | AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */ |
| 162 | >; |
| 163 | }; |
| 164 | |
| 165 | main_i2c2_pins_default: main-i2c2-default-pins { |
| 166 | pinctrl-single,pins = < |
| 167 | AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */ |
| 168 | AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ |
| 169 | >; |
| 170 | }; |
| 171 | |
| 172 | main_mmc0_pins_default: main-mmc0-default-pins { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 173 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 174 | pinctrl-single,pins = < |
| 175 | AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ |
| 176 | AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ |
| 177 | AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ |
| 178 | AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ |
| 179 | AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ |
| 180 | AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ |
| 181 | AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ |
| 182 | AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ |
| 183 | AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ |
| 184 | AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ |
| 185 | >; |
| 186 | }; |
| 187 | |
| 188 | main_mmc1_pins_default: main-mmc1-default-pins { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 189 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 190 | pinctrl-single,pins = < |
| 191 | AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ |
| 192 | AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ |
| 193 | AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */ |
| 194 | AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */ |
| 195 | AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */ |
| 196 | AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */ |
| 197 | AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */ |
| 198 | >; |
| 199 | }; |
| 200 | |
| 201 | usr_led_pins_default: usr-led-default-pins { |
| 202 | pinctrl-single,pins = < |
| 203 | AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */ |
| 204 | >; |
| 205 | }; |
| 206 | |
| 207 | main_mdio1_pins_default: main-mdio1-default-pins { |
| 208 | pinctrl-single,pins = < |
| 209 | AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */ |
| 210 | AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */ |
| 211 | >; |
| 212 | }; |
| 213 | |
| 214 | main_rgmii1_pins_default: main-rgmii1-default-pins { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 215 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 216 | pinctrl-single,pins = < |
| 217 | AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */ |
| 218 | AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */ |
| 219 | AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */ |
| 220 | AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */ |
| 221 | AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */ |
| 222 | AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */ |
| 223 | AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */ |
| 224 | AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */ |
| 225 | AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */ |
| 226 | AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */ |
| 227 | AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */ |
| 228 | AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */ |
| 229 | >; |
| 230 | }; |
| 231 | |
| 232 | main_usb1_pins_default: main-usb1-default-pins { |
| 233 | pinctrl-single,pins = < |
| 234 | AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */ |
| 235 | >; |
| 236 | }; |
| 237 | |
| 238 | main_mcasp1_pins_default: main-mcasp1-default-pins { |
| 239 | pinctrl-single,pins = < |
| 240 | AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24/K17) GPMC0_BE0N_CLE.MCASP1_ACLKX */ |
| 241 | AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23/P21) GPMC0_WAIT0.MCASP1_AFSX */ |
| 242 | AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */ |
| 243 | AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */ |
| 244 | >; |
| 245 | }; |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 246 | |
| 247 | main_dss0_pins_default: main-dss0-default-pins { |
| 248 | pinctrl-single,pins = < |
| 249 | AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ |
| 250 | AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ |
| 251 | AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ |
| 252 | AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ |
| 253 | AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ |
| 254 | AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ |
| 255 | AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ |
| 256 | AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ |
| 257 | AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ |
| 258 | AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ |
| 259 | AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ |
| 260 | AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ |
| 261 | AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ |
| 262 | AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ |
| 263 | AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ |
| 264 | AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ |
| 265 | AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ |
| 266 | AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ |
| 267 | AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ |
| 268 | AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ |
| 269 | AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */ |
| 270 | AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */ |
| 271 | AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */ |
| 272 | AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */ |
| 273 | AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */ |
| 274 | AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */ |
| 275 | AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */ |
| 276 | AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */ |
| 277 | >; |
| 278 | }; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 279 | }; |
| 280 | |
| 281 | &mcu_pmx0 { |
| 282 | wkup_uart0_pins_default: wkup-uart0-default-pins { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 283 | bootph-pre-ram; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 284 | pinctrl-single,pins = < |
| 285 | AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */ |
| 286 | AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */ |
| 287 | AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4/B5) WKUP_UART0_RXD */ |
| 288 | AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5/C6) WKUP_UART0_TXD */ |
| 289 | >; |
| 290 | }; |
| 291 | }; |
| 292 | |
| 293 | &wkup_uart0 { |
| 294 | /* WKUP UART0 is used by DM firmware */ |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 295 | bootph-pre-ram; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 296 | status = "reserved"; |
| 297 | pinctrl-names = "default"; |
| 298 | pinctrl-0 = <&wkup_uart0_pins_default>; |
| 299 | }; |
| 300 | |
| 301 | &main_uart0 { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 302 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 303 | status = "okay"; |
| 304 | pinctrl-names = "default"; |
| 305 | pinctrl-0 = <&main_uart0_pins_default>; |
| 306 | }; |
| 307 | |
| 308 | &main_uart1 { |
| 309 | /* Main UART1 is used by TIFS firmware */ |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 310 | bootph-pre-ram; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 311 | status = "reserved"; |
| 312 | pinctrl-names = "default"; |
| 313 | pinctrl-0 = <&main_uart1_pins_default>; |
| 314 | }; |
| 315 | |
| 316 | &main_i2c0 { |
| 317 | status = "okay"; |
| 318 | pinctrl-names = "default"; |
| 319 | pinctrl-0 = <&main_i2c0_pins_default>; |
| 320 | clock-frequency = <400000>; |
| 321 | |
| 322 | eeprom@51 { |
| 323 | /* AT24C512C-MAHM-T or M24512-DFMC6TG */ |
| 324 | compatible = "atmel,24c512"; |
| 325 | reg = <0x51>; |
| 326 | }; |
| 327 | |
| 328 | typec_pd0: tps6598x@3f { |
| 329 | compatible = "ti,tps6598x"; |
| 330 | reg = <0x3f>; |
| 331 | |
| 332 | connector { |
| 333 | compatible = "usb-c-connector"; |
| 334 | label = "USB-C"; |
| 335 | self-powered; |
| 336 | data-role = "dual"; |
| 337 | power-role = "sink"; |
| 338 | ports { |
| 339 | #address-cells = <1>; |
| 340 | #size-cells = <0>; |
| 341 | |
| 342 | port@0 { |
| 343 | reg = <0>; |
| 344 | usb_con_hs: endpoint { |
| 345 | remote-endpoint = <&usb0_hs_ep>; |
| 346 | }; |
| 347 | }; |
| 348 | }; |
| 349 | }; |
| 350 | }; |
| 351 | }; |
| 352 | |
| 353 | &main_i2c1 { |
| 354 | status = "okay"; |
| 355 | pinctrl-names = "default"; |
| 356 | pinctrl-0 = <&main_i2c1_pins_default>; |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 357 | clock-frequency = <100000>; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 358 | |
| 359 | tlv320aic3106: audio-codec@1b { |
| 360 | #sound-dai-cells = <0>; |
| 361 | compatible = "ti,tlv320aic3106"; |
| 362 | reg = <0x1b>; |
| 363 | ai3x-micbias-vg = <1>; /* 2.0V */ |
| 364 | |
| 365 | /* Regulators */ |
| 366 | AVDD-supply = <&vcc_3v3_sys>; |
| 367 | IOVDD-supply = <&vcc_3v3_sys>; |
| 368 | DRVDD-supply = <&vcc_3v3_sys>; |
| 369 | }; |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 370 | |
| 371 | sii9022: bridge-hdmi@3b { |
| 372 | compatible = "sil,sii9022"; |
| 373 | reg = <0x3b>; |
| 374 | interrupt-parent = <&exp1>; |
| 375 | interrupts = <16 IRQ_TYPE_EDGE_FALLING>; |
| 376 | #sound-dai-cells = <0>; |
| 377 | sil,i2s-data-lanes = < 0 >; |
| 378 | |
| 379 | ports { |
| 380 | #address-cells = <1>; |
| 381 | #size-cells = <0>; |
| 382 | |
| 383 | port@0 { |
| 384 | reg = <0>; |
| 385 | |
| 386 | sii9022_in: endpoint { |
| 387 | remote-endpoint = <&dpi1_out>; |
| 388 | }; |
| 389 | }; |
| 390 | |
| 391 | port@1 { |
| 392 | reg = <1>; |
| 393 | |
| 394 | sii9022_out: endpoint { |
| 395 | remote-endpoint = <&hdmi_connector_in>; |
| 396 | }; |
| 397 | }; |
| 398 | }; |
| 399 | }; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 400 | }; |
| 401 | |
| 402 | &sdhci0 { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 403 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 404 | status = "okay"; |
| 405 | pinctrl-names = "default"; |
| 406 | pinctrl-0 = <&main_mmc0_pins_default>; |
| 407 | ti,driver-strength-ohm = <50>; |
| 408 | disable-wp; |
| 409 | }; |
| 410 | |
| 411 | &sdhci1 { |
| 412 | /* SD/MMC */ |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 413 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 414 | status = "okay"; |
| 415 | pinctrl-names = "default"; |
| 416 | pinctrl-0 = <&main_mmc1_pins_default>; |
| 417 | ti,driver-strength-ohm = <50>; |
| 418 | disable-wp; |
| 419 | }; |
| 420 | |
| 421 | &cpsw3g { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 422 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 423 | pinctrl-names = "default"; |
| 424 | pinctrl-0 = <&main_rgmii1_pins_default>; |
| 425 | }; |
| 426 | |
| 427 | &cpsw_port1 { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 428 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 429 | phy-mode = "rgmii-rxid"; |
| 430 | phy-handle = <&cpsw3g_phy0>; |
| 431 | }; |
| 432 | |
| 433 | &cpsw3g_mdio { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 434 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 435 | status = "okay"; |
| 436 | pinctrl-names = "default"; |
| 437 | pinctrl-0 = <&main_mdio1_pins_default>; |
| 438 | |
| 439 | cpsw3g_phy0: ethernet-phy@0 { |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 440 | bootph-all; |
Nishanth Menon | 7937af1 | 2023-07-27 04:03:31 -0500 | [diff] [blame] | 441 | reg = <0>; |
| 442 | ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 443 | ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 444 | ti,min-output-impedance; |
| 445 | }; |
| 446 | }; |
| 447 | |
| 448 | &mailbox0_cluster0 { |
| 449 | mbox_m4_0: mbox-m4-0 { |
| 450 | ti,mbox-rx = <0 0 0>; |
| 451 | ti,mbox-tx = <1 0 0>; |
| 452 | }; |
| 453 | }; |
| 454 | |
| 455 | &usbss0 { |
| 456 | status = "okay"; |
| 457 | ti,vbus-divider; |
| 458 | }; |
| 459 | |
| 460 | &usbss1 { |
| 461 | status = "okay"; |
| 462 | ti,vbus-divider; |
| 463 | }; |
| 464 | |
| 465 | &usb0 { |
| 466 | #address-cells = <1>; |
| 467 | #size-cells = <0>; |
| 468 | usb-role-switch; |
| 469 | |
| 470 | port@0 { |
| 471 | reg = <0>; |
| 472 | usb0_hs_ep: endpoint { |
| 473 | remote-endpoint = <&usb_con_hs>; |
| 474 | }; |
| 475 | }; |
| 476 | }; |
| 477 | |
| 478 | &usb1 { |
| 479 | dr_mode = "host"; |
| 480 | pinctrl-names = "default"; |
| 481 | pinctrl-0 = <&main_usb1_pins_default>; |
| 482 | }; |
| 483 | |
| 484 | &mcasp1 { |
| 485 | status = "okay"; |
| 486 | #sound-dai-cells = <0>; |
| 487 | |
| 488 | pinctrl-names = "default"; |
| 489 | pinctrl-0 = <&main_mcasp1_pins_default>; |
| 490 | |
| 491 | op-mode = <0>; /* MCASP_IIS_MODE */ |
| 492 | tdm-slots = <2>; |
| 493 | |
| 494 | serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ |
| 495 | 1 0 2 0 |
| 496 | 0 0 0 0 |
| 497 | 0 0 0 0 |
| 498 | 0 0 0 0 |
| 499 | >; |
| 500 | tx-num-evt = <32>; |
| 501 | rx-num-evt = <32>; |
| 502 | }; |
Nishanth Menon | a0ca5f2 | 2023-11-14 21:28:54 -0600 | [diff] [blame] | 503 | |
| 504 | &dss { |
| 505 | status = "okay"; |
| 506 | pinctrl-names = "default"; |
| 507 | pinctrl-0 = <&main_dss0_pins_default>; |
| 508 | }; |
| 509 | |
| 510 | &dss_ports { |
| 511 | /* VP2: DPI Output */ |
| 512 | port@1 { |
| 513 | reg = <1>; |
| 514 | |
| 515 | dpi1_out: endpoint { |
| 516 | remote-endpoint = <&sii9022_in>; |
| 517 | }; |
| 518 | }; |
| 519 | }; |