blob: 92913c8e79d159900f79fe75d5835aa28ff280a7 [file] [log] [blame]
Mingkai Hua8d97582013-07-04 17:33:43 +08001/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
York Sun3aab0cd2013-08-12 14:57:12 -07004 * SPDX-License-Identifier: GPL-2.0+
Mingkai Hua8d97582013-07-04 17:33:43 +08005 */
6
7/*
8 * C29XPCIE board configuration file
9 */
10
11#ifndef __CONFIG_H
12#define __CONFIG_H
13
14#define CONFIG_PHYS_64BIT
15
16#ifdef CONFIG_C29XPCIE
17#define CONFIG_PPC_C29X
18#endif
19
20#ifdef CONFIG_SPIFLASH
21#define CONFIG_RAMBOOT_SPIFLASH
22#define CONFIG_SYS_TEXT_BASE 0x11000000
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053023#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
Mingkai Hua8d97582013-07-04 17:33:43 +080024#endif
25
Po Liueb6b4582014-01-10 10:10:59 +080026#ifdef CONFIG_NAND
27#define CONFIG_SPL
28#define CONFIG_TPL
29#ifdef CONFIG_TPL_BUILD
30#define CONFIG_SPL_NAND_BOOT
31#define CONFIG_SPL_FLUSH_IMAGE
32#define CONFIG_SPL_ENV_SUPPORT
33#define CONFIG_SPL_NAND_INIT
34#define CONFIG_SPL_SERIAL_SUPPORT
35#define CONFIG_SPL_LIBGENERIC_SUPPORT
36#define CONFIG_SPL_LIBCOMMON_SUPPORT
37#define CONFIG_SPL_I2C_SUPPORT
38#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
39#define CONFIG_SPL_NAND_SUPPORT
40#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
41#define CONFIG_SPL_COMMON_INIT_DDR
42#define CONFIG_SPL_MAX_SIZE (128 << 10)
43#define CONFIG_SPL_TEXT_BASE 0xf8f81000
44#define CONFIG_SYS_MPC85XX_NO_RESETVEC
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053045#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10)
Po Liueb6b4582014-01-10 10:10:59 +080046#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000)
47#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000)
48#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
49#elif defined(CONFIG_SPL_BUILD)
50#define CONFIG_SPL_INIT_MINIMAL
51#define CONFIG_SPL_SERIAL_SUPPORT
52#define CONFIG_SPL_NAND_SUPPORT
53#define CONFIG_SPL_NAND_MINIMAL
54#define CONFIG_SPL_FLUSH_IMAGE
55#define CONFIG_SPL_TEXT_BASE 0xff800000
56#define CONFIG_SPL_MAX_SIZE 8192
57#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
58#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000
59#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000
60#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10)
61#endif
62#define CONFIG_SPL_PAD_TO 0x20000
63#define CONFIG_TPL_PAD_TO 0x20000
64#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
65#define CONFIG_SYS_TEXT_BASE 0x11001000
66#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
67#endif
68
Mingkai Hua8d97582013-07-04 17:33:43 +080069#ifndef CONFIG_SYS_TEXT_BASE
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053070#define CONFIG_SYS_TEXT_BASE 0xeff40000
Mingkai Hua8d97582013-07-04 17:33:43 +080071#endif
72
73#ifndef CONFIG_RESET_VECTOR_ADDRESS
74#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
75#endif
76
Po Liueb6b4582014-01-10 10:10:59 +080077#ifdef CONFIG_SPL_BUILD
78#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
79#else
80#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
81#endif
82
83#ifdef CONFIG_SPL_BUILD
84#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
Mingkai Hua8d97582013-07-04 17:33:43 +080085#endif
86
87/* High Level Configuration Options */
88#define CONFIG_BOOKE /* BOOKE */
89#define CONFIG_E500 /* BOOKE e500 family */
Mingkai Hua8d97582013-07-04 17:33:43 +080090#define CONFIG_FSL_IFC /* Enable IFC Support */
91#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
92
93#define CONFIG_PCI /* Enable PCI/PCIE */
94#ifdef CONFIG_PCI
95#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
96#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
97#define CONFIG_PCI_INDIRECT_BRIDGE
98#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
99#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
100
101#define CONFIG_CMD_NET
102#define CONFIG_CMD_PCI
103
104#define CONFIG_E1000
105
106/*
107 * PCI Windows
108 * Memory space is mapped 1-1, but I/O space must start from 0.
109 */
110/* controller 1, Slot 1, tgtid 1, Base address a000 */
111#define CONFIG_SYS_PCIE1_NAME "Slot 1"
112#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
113#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
114#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
115#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */
116#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
117#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
118#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
119#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
120
121#define CONFIG_PCI_PNP /* do pci plug-and-play */
122
123#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
124#define CONFIG_DOS_PARTITION
125#endif
126
127#define CONFIG_FSL_LAW /* Use common FSL init code */
128#define CONFIG_TSEC_ENET
129#define CONFIG_ENV_OVERWRITE
130
131#define CONFIG_DDR_CLK_FREQ 100000000
132#define CONFIG_SYS_CLK_FREQ 66666666
133
134#define CONFIG_HWCONFIG
135
136/*
137 * These can be toggled for performance analysis, otherwise use default.
138 */
139#define CONFIG_L2_CACHE /* toggle L2 cache */
140#define CONFIG_BTB /* toggle branch predition */
141
142#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
143
144#define CONFIG_ENABLE_36BIT_PHYS
145
146#define CONFIG_ADDR_MAP 1
147#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
148
149#define CONFIG_SYS_MEMTEST_START 0x00200000
150#define CONFIG_SYS_MEMTEST_END 0x00400000
151#define CONFIG_PANIC_HANG
152
153/* DDR Setup */
York Sun5614e712013-09-30 09:22:09 -0700154#define CONFIG_SYS_FSL_DDR3
Mingkai Hua8d97582013-07-04 17:33:43 +0800155#define CONFIG_DDR_SPD
156#define CONFIG_SYS_SPD_BUS_NUM 0
157#define SPD_EEPROM_ADDRESS 0x50
158#define CONFIG_SYS_DDR_RAW_TIMING
159
160/* DDR ECC Setup*/
161#define CONFIG_DDR_ECC
162#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
163#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
164
165#define CONFIG_SYS_SDRAM_SIZE 512
166#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
167#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
168
169#define CONFIG_DIMM_SLOTS_PER_CTLR 1
170#define CONFIG_CHIP_SELECTS_PER_CTRL 1
171
172#define CONFIG_SYS_CCSRBAR 0xffe00000
173#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
174
175/* Platform SRAM setting */
176#define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000
177#define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \
178 (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
179#define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10)
180
Po Liueb6b4582014-01-10 10:10:59 +0800181#ifdef CONFIG_SPL_BUILD
182#define CONFIG_SYS_NO_FLASH
183#endif
184
Mingkai Hua8d97582013-07-04 17:33:43 +0800185/*
186 * IFC Definitions
187 */
188/* NOR Flash on IFC */
189#define CONFIG_SYS_FLASH_BASE 0xec000000
190#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
191
192#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
193
194#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
195#define CONFIG_SYS_MAX_FLASH_BANKS 1
196
197#define CONFIG_SYS_FLASH_QUIET_TEST
198#define CONFIG_FLASH_SHOW_PROGRESS 45
199#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */
200#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */
201
202/* 16Bit NOR Flash - S29GL512S10TFI01 */
203#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
204 CSPR_PORT_SIZE_16 | \
205 CSPR_MSEL_NOR | \
206 CSPR_V)
207#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024)
208#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4)
Po Liuac2785c2013-08-21 14:22:18 +0800209
Mingkai Hua8d97582013-07-04 17:33:43 +0800210#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
211 FTIM0_NOR_TEADC(0x5) | \
212 FTIM0_NOR_TEAHC(0x5))
Po Liuac2785c2013-08-21 14:22:18 +0800213#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
214 FTIM1_NOR_TRAD_NOR(0x1A) |\
215 FTIM1_NOR_TSEQRAD_NOR(0x13))
Mingkai Hua8d97582013-07-04 17:33:43 +0800216#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
217 FTIM2_NOR_TCH(0x4) | \
Po Liuac2785c2013-08-21 14:22:18 +0800218 FTIM2_NOR_TWPH(0x0E) | \
Mingkai Hua8d97582013-07-04 17:33:43 +0800219 FTIM2_NOR_TWP(0x1c))
220#define CONFIG_SYS_NOR_FTIM3 0x0
221
222/* CFI for NOR Flash */
223#define CONFIG_FLASH_CFI_DRIVER
224#define CONFIG_SYS_FLASH_CFI
225#define CONFIG_SYS_FLASH_EMPTY_INFO
226#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
227
228/* NAND Flash on IFC */
229#define CONFIG_NAND_FSL_IFC
230#define CONFIG_SYS_NAND_BASE 0xff800000
231#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
232
233#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
234
235#define CONFIG_SYS_MAX_NAND_DEVICE 1
236#define CONFIG_MTD_NAND_VERIFY_WRITE
237#define CONFIG_CMD_NAND
Po Liueb6b4582014-01-10 10:10:59 +0800238#define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024)
Mingkai Hua8d97582013-07-04 17:33:43 +0800239
240/* 8Bit NAND Flash - K9F1G08U0B */
241#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
242 | CSPR_PORT_SIZE_8 \
243 | CSPR_MSEL_NAND \
244 | CSPR_V)
245#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
Prabhakar Kushwahaaffd5202013-10-04 10:05:50 +0530246#define CONFIG_SYS_NAND_OOBSIZE 0x00000280 /* 640b */
Mingkai Hua8d97582013-07-04 17:33:43 +0800247#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
248 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
249 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
Prabhakar Kushwahaaffd5202013-10-04 10:05:50 +0530250 | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \
251 | CSOR_NAND_PGS_8K /* Page Size = 8K */ \
252 | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\
253 | CSOR_NAND_PB(128)) /*128 Pages Per Block*/
Mingkai Hua8d97582013-07-04 17:33:43 +0800254#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \
255 FTIM0_NAND_TWP(0x0c) | \
256 FTIM0_NAND_TWCHT(0x08) | \
257 FTIM0_NAND_TWH(0x06))
258#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \
259 FTIM1_NAND_TWBE(0x1d) | \
260 FTIM1_NAND_TRR(0x08) | \
261 FTIM1_NAND_TRP(0x0c))
262#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \
263 FTIM2_NAND_TREH(0x0a) | \
264 FTIM2_NAND_TWHRE(0x18))
265#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04))
266
267#define CONFIG_SYS_NAND_DDR_LAW 11
268
269/* Set up IFC registers for boot location NOR/NAND */
Po Liueb6b4582014-01-10 10:10:59 +0800270#ifdef CONFIG_NAND
271#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
272#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
273#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
274#define CONFIG_SYS_CSOR0_EXT CONFIG_SYS_NAND_OOBSIZE
275#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
276#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
277#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
278#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
279#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR
280#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
281#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
282#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
283#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
284#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
285#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
286#else
Mingkai Hua8d97582013-07-04 17:33:43 +0800287#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
288#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
289#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
290#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
291#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
292#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
293#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
294#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
295#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
296#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
Prabhakar Kushwahaaffd5202013-10-04 10:05:50 +0530297#define CONFIG_SYS_CSOR1_EXT CONFIG_SYS_NAND_OOBSIZE
Mingkai Hua8d97582013-07-04 17:33:43 +0800298#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
299#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
300#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
301#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
Po Liueb6b4582014-01-10 10:10:59 +0800302#endif
Mingkai Hua8d97582013-07-04 17:33:43 +0800303
304/* CPLD on IFC, selected by CS2 */
305#define CONFIG_SYS_CPLD_BASE 0xffdf0000
306#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \
307 | CONFIG_SYS_CPLD_BASE)
308
309#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
310 | CSPR_PORT_SIZE_8 \
311 | CSPR_MSEL_GPCM \
312 | CSPR_V)
313#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024)
314#define CONFIG_SYS_CSOR2 0x0
315/* CPLD Timing parameters for IFC CS2 */
316#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
317 FTIM0_GPCM_TEADC(0x0e) | \
318 FTIM0_GPCM_TEAHC(0x0e))
319#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
320 FTIM1_GPCM_TRAD(0x1f))
321#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
322 FTIM2_GPCM_TCH(0x0) | \
323 FTIM2_GPCM_TWP(0x1f))
324#define CONFIG_SYS_CS2_FTIM3 0x0
325
326#if defined(CONFIG_RAMBOOT_SPIFLASH)
327#define CONFIG_SYS_RAMBOOT
328#define CONFIG_SYS_EXTRA_ENV_RELOC
329#endif
330
331#define CONFIG_BOARD_EARLY_INIT_R
332
333#define CONFIG_SYS_INIT_RAM_LOCK
334#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000
335#define CONFIG_SYS_INIT_RAM_END 0x00004000
336
337#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
338 - GENERATED_GBL_DATA_SIZE)
339#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
340
341#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
Po Liueb6b4582014-01-10 10:10:59 +0800342#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
343
344/*
345 * Config the L2 Cache as L2 SRAM
346 */
347#if defined(CONFIG_SPL_BUILD)
348#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
349#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
350#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
351#define CONFIG_SYS_L2_SIZE (256 << 10)
352#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
353#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000
354#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
355#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10)
356#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
357#define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10)
358#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
359#elif defined(CONFIG_NAND)
360#ifdef CONFIG_TPL_BUILD
361#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
362#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
363#define CONFIG_SYS_L2_SIZE (256 << 10)
364#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
365#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000
366#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
367#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
368#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10)
369#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
370#else
371#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
372#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
373#define CONFIG_SYS_L2_SIZE (256 << 10)
374#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
375#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000)
376#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
377#endif
378#endif
379#endif
Mingkai Hua8d97582013-07-04 17:33:43 +0800380
381/* Serial Port */
382#define CONFIG_CONS_INDEX 1
383#define CONFIG_SYS_NS16550
384#define CONFIG_SYS_NS16550_SERIAL
385#define CONFIG_SYS_NS16550_REG_SIZE 1
386#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
387
Po Liueb6b4582014-01-10 10:10:59 +0800388#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
389#define CONFIG_NS16550_MIN_FUNCTIONS
390#endif
391
Mingkai Hua8d97582013-07-04 17:33:43 +0800392#define CONFIG_SERIAL_MULTI /* Enable both serial ports */
393#define CONFIG_SYS_CONSOLE_IS_IN_ENV
394
395#define CONFIG_SYS_BAUDRATE_TABLE \
396 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
397
398#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
399#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
400
401/* Use the HUSH parser */
402#define CONFIG_SYS_HUSH_PARSER
403
404/*
405 * Pass open firmware flat tree
406 */
407#define CONFIG_OF_LIBFDT
408#define CONFIG_OF_BOARD_SETUP
409#define CONFIG_OF_STDOUT_VIA_ALIAS
410
411/* new uImage format support */
412#define CONFIG_FIT
413#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
414
415#define CONFIG_SYS_I2C
416#define CONFIG_SYS_I2C_FSL
417#define CONFIG_SYS_FSL_I2C_SPEED 400000
418#define CONFIG_SYS_FSL_I2C2_SPEED 400000
419#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
420#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
421#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
422#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
423
424/* I2C EEPROM */
425/* enable read and write access to EEPROM */
426#define CONFIG_CMD_EEPROM
427#define CONFIG_SYS_I2C_MULTI_EEPROMS
428#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
429#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
430#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
431
432#define CONFIG_CMD_I2C
433
434/* eSPI - Enhanced SPI */
435#define CONFIG_FSL_ESPI
436#define CONFIG_SPI_FLASH
437#define CONFIG_SPI_FLASH_SPANSION
438#define CONFIG_SPI_FLASH_EON
439#define CONFIG_CMD_SF
440#define CONFIG_SF_DEFAULT_SPEED 10000000
441#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
442
443#ifdef CONFIG_TSEC_ENET
444#define CONFIG_NET_MULTI
445#define CONFIG_MII /* MII PHY management */
446#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
447#define CONFIG_TSEC1 1
448#define CONFIG_TSEC1_NAME "eTSEC1"
449#define CONFIG_TSEC2 1
450#define CONFIG_TSEC2_NAME "eTSEC2"
451
452/* Default mode is RGMII mode */
453#define TSEC1_PHY_ADDR 0
454#define TSEC2_PHY_ADDR 2
455
456#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
457#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
458
459#define CONFIG_ETHPRIME "eTSEC1"
460
461#define CONFIG_PHY_GIGE
462#endif /* CONFIG_TSEC_ENET */
463
464/*
465 * Environment
466 */
467#if defined(CONFIG_SYS_RAMBOOT)
468#if defined(CONFIG_RAMBOOT_SPIFLASH)
469#define CONFIG_ENV_IS_IN_SPI_FLASH
470#define CONFIG_ENV_SPI_BUS 0
471#define CONFIG_ENV_SPI_CS 0
472#define CONFIG_ENV_SPI_MAX_HZ 10000000
473#define CONFIG_ENV_SPI_MODE 0
474#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
475#define CONFIG_ENV_SECT_SIZE 0x10000
476#define CONFIG_ENV_SIZE 0x2000
477#endif
Po Liueb6b4582014-01-10 10:10:59 +0800478#elif defined(CONFIG_NAND)
479#define CONFIG_ENV_IS_IN_NAND
480#ifdef CONFIG_TPL_BUILD
481#define CONFIG_ENV_SIZE 0x2000
482#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
483#else
484#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
485#define CONFIG_ENV_RANGE CONFIG_ENV_SIZE
486#endif
487#define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_BLOCK_SIZE
Mingkai Hua8d97582013-07-04 17:33:43 +0800488#else
489#define CONFIG_ENV_IS_IN_FLASH
Mingkai Hua8d97582013-07-04 17:33:43 +0800490#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
Mingkai Hua8d97582013-07-04 17:33:43 +0800491#define CONFIG_ENV_SIZE 0x2000
492#define CONFIG_ENV_SECT_SIZE 0x20000
493#endif
494
495#define CONFIG_LOADS_ECHO
496#define CONFIG_SYS_LOADS_BAUD_CHANGE
497
498/*
499 * Command line configuration.
500 */
501#include <config_cmd_default.h>
502
503#define CONFIG_CMD_ERRATA
504#define CONFIG_CMD_ELF
505#define CONFIG_CMD_IRQ
506#define CONFIG_CMD_MII
507#define CONFIG_CMD_PING
508#define CONFIG_CMD_SETEXPR
509#define CONFIG_CMD_REGINFO
510
511/*
512 * Miscellaneous configurable options
513 */
514#define CONFIG_SYS_LONGHELP /* undef to save memory */
515#define CONFIG_CMDLINE_EDITING /* Command-line editing */
516#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
517#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
Mingkai Hua8d97582013-07-04 17:33:43 +0800518
519#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
520#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
521 /* Print Buffer Size */
522#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
523#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
Mingkai Hua8d97582013-07-04 17:33:43 +0800524
525/*
526 * For booting Linux, the board info and command line data
527 * have to be in the first 64 MB of memory, since this is
528 * the maximum mapped by the Linux kernel during initialization.
529 */
530#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
531#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
532
533/*
534 * Environment Configuration
535 */
536
537#ifdef CONFIG_TSEC_ENET
538#define CONFIG_HAS_ETH0
539#define CONFIG_HAS_ETH1
540#endif
541
542#define CONFIG_ROOTPATH "/opt/nfsroot"
543#define CONFIG_BOOTFILE "uImage"
544#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */
545
546/* default location for tftp and bootm */
547#define CONFIG_LOADADDR 1000000
548
549#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
550
551#define CONFIG_BAUDRATE 115200
552
Po Liu9c25ee62013-09-26 09:40:11 +0800553#define CONFIG_DEF_HWCONFIG fsl_ddr:ecc=on
554
Mingkai Hua8d97582013-07-04 17:33:43 +0800555#define CONFIG_EXTRA_ENV_SETTINGS \
556 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
557 "netdev=eth0\0" \
558 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
559 "loadaddr=1000000\0" \
560 "consoledev=ttyS0\0" \
561 "ramdiskaddr=2000000\0" \
562 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
563 "fdtaddr=c00000\0" \
564 "fdtfile=name/of/device-tree.dtb\0" \
565 "othbootargs=ramdisk_size=600000\0" \
566
567#define CONFIG_RAMBOOTCOMMAND \
568 "setenv bootargs root=/dev/ram rw " \
569 "console=$consoledev,$baudrate $othbootargs; " \
570 "tftp $ramdiskaddr $ramdiskfile;" \
571 "tftp $loadaddr $bootfile;" \
572 "tftp $fdtaddr $fdtfile;" \
573 "bootm $loadaddr $ramdiskaddr $fdtaddr"
574
575#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
576
577#endif /* __CONFIG_H */