blob: 7c347861f0cfd418ea5a393c6325ff67e4ba7790 [file] [log] [blame]
wdenkf12e5682003-07-07 20:07:54 +00001/*
Wolfgang Denk7c803be2008-09-16 18:02:19 +02002 * (C) Copyright 2000-2008
wdenkf12e5682003-07-07 20:07:54 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
37#define CONFIG_TQM860M 1 /* ...on a TQM8xxM module */
38
39#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
Wolfgang Denk3cb7a482009-07-28 22:13:52 +020040#define CONFIG_SYS_SMC_RXBUFLEN 128
41#define CONFIG_SYS_MAXIDLE 10
wdenkf12e5682003-07-07 20:07:54 +000042#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
43
wdenkae3af052003-08-07 22:18:11 +000044#define CONFIG_BOOTCOUNT_LIMIT
wdenkf12e5682003-07-07 20:07:54 +000045
wdenkae3af052003-08-07 22:18:11 +000046#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
wdenkf12e5682003-07-07 20:07:54 +000047
48#define CONFIG_BOARD_TYPES 1 /* support board types */
49
50#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010051 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
wdenkf12e5682003-07-07 20:07:54 +000052 "echo"
53
54#undef CONFIG_BOOTARGS
55
56#define CONFIG_EXTRA_ENV_SETTINGS \
57 "netdev=eth0\0" \
58 "nfsargs=setenv bootargs root=/dev/nfs rw " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010059 "nfsroot=${serverip}:${rootpath}\0" \
wdenkf12e5682003-07-07 20:07:54 +000060 "ramargs=setenv bootargs root=/dev/ram rw\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010061 "addip=setenv bootargs ${bootargs} " \
62 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
63 ":${hostname}:${netdev}:off panic=1\0" \
wdenkf12e5682003-07-07 20:07:54 +000064 "flash_nfs=run nfsargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010065 "bootm ${kernel_addr}\0" \
wdenkf12e5682003-07-07 20:07:54 +000066 "flash_self=run ramargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010067 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
68 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
wdenkf12e5682003-07-07 20:07:54 +000069 "rootpath=/opt/eldk/ppc_8xx\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020070 "hostname=TQM860M\0" \
71 "bootfile=TQM860M/uImage\0" \
Martin Krauseda3aad52007-09-26 17:55:56 +020072 "fdt_addr=400C0000\0" \
73 "kernel_addr=40100000\0" \
Wolfgang Denkeb6da802007-09-16 02:39:35 +020074 "ramdisk_addr=40280000\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020075 "u-boot=TQM860M/u-image.bin\0" \
Martin Krauseda3aad52007-09-26 17:55:56 +020076 "load=tftp 200000 ${u-boot}\0" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020077 "update=prot off 40000000 +${filesize};" \
78 "era 40000000 +${filesize};" \
Martin Krauseda3aad52007-09-26 17:55:56 +020079 "cp.b 200000 40000000 ${filesize};" \
Wolfgang Denk29f8f582008-08-09 23:17:32 +020080 "sete filesize;save\0" \
wdenkf12e5682003-07-07 20:07:54 +000081 ""
82#define CONFIG_BOOTCOMMAND "run flash_self"
83
84#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020085#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
wdenkf12e5682003-07-07 20:07:54 +000086
87#undef CONFIG_WATCHDOG /* watchdog disabled */
88
89#define CONFIG_STATUS_LED 1 /* Status LED enabled */
90
91#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
92
Jon Loeliger37d4bb72007-07-09 21:38:02 -050093/*
94 * BOOTP options
95 */
96#define CONFIG_BOOTP_SUBNETMASK
97#define CONFIG_BOOTP_GATEWAY
98#define CONFIG_BOOTP_HOSTNAME
99#define CONFIG_BOOTP_BOOTPATH
100#define CONFIG_BOOTP_BOOTFILESIZE
101
wdenkf12e5682003-07-07 20:07:54 +0000102
103#define CONFIG_MAC_PARTITION
104#define CONFIG_DOS_PARTITION
105
106#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
107
wdenkf12e5682003-07-07 20:07:54 +0000108
Jon Loeliger26946902007-07-04 22:30:50 -0500109/*
110 * Command line configuration.
111 */
112#include <config_cmd_default.h>
113
114#define CONFIG_CMD_ASKENV
115#define CONFIG_CMD_DATE
116#define CONFIG_CMD_DHCP
117#define CONFIG_CMD_ELF
Wolfgang Denk9a63b7f2009-02-21 21:51:21 +0100118#define CONFIG_CMD_EXT2
Jon Loeliger26946902007-07-04 22:30:50 -0500119#define CONFIG_CMD_IDE
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200120#define CONFIG_CMD_JFFS2
Jon Loeliger26946902007-07-04 22:30:50 -0500121#define CONFIG_CMD_NFS
122#define CONFIG_CMD_SNTP
123
wdenkf12e5682003-07-07 20:07:54 +0000124
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200125#define CONFIG_NETCONSOLE
126
127
wdenkf12e5682003-07-07 20:07:54 +0000128/*
129 * Miscellaneous configurable options
130 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131#define CONFIG_SYS_LONGHELP /* undef to save memory */
132#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
wdenkf12e5682003-07-07 20:07:54 +0000133
Wolfgang Denk2751a952006-10-28 02:29:14 +0200134#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200135#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
136#ifdef CONFIG_SYS_HUSH_PARSER
137#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenkf12e5682003-07-07 20:07:54 +0000138#endif
139
Jon Loeliger26946902007-07-04 22:30:50 -0500140#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200141#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenkf12e5682003-07-07 20:07:54 +0000142#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenkf12e5682003-07-07 20:07:54 +0000144#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200145#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
146#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
147#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenkf12e5682003-07-07 20:07:54 +0000148
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200149#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
150#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenkf12e5682003-07-07 20:07:54 +0000151
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200152#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
wdenkf12e5682003-07-07 20:07:54 +0000153
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200154#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkf12e5682003-07-07 20:07:54 +0000155
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200156#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenkf12e5682003-07-07 20:07:54 +0000157
158/*
159 * Low Level Configuration Settings
160 * (address mappings, register initial values, etc.)
161 * You should know what you are doing if you make changes here.
162 */
163/*-----------------------------------------------------------------------
164 * Internal Memory Mapped Register
165 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200166#define CONFIG_SYS_IMMR 0xFFF00000
wdenkf12e5682003-07-07 20:07:54 +0000167
168/*-----------------------------------------------------------------------
169 * Definitions for initial stack pointer and data area (in DPRAM)
170 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200171#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
172#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
173#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
174#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
175#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenkf12e5682003-07-07 20:07:54 +0000176
177/*-----------------------------------------------------------------------
178 * Start addresses for the final memory configuration
179 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200180 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenkf12e5682003-07-07 20:07:54 +0000181 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200182#define CONFIG_SYS_SDRAM_BASE 0x00000000
183#define CONFIG_SYS_FLASH_BASE 0x40000000
184#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
185#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
186#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
wdenkf12e5682003-07-07 20:07:54 +0000187
188/*
189 * For booting Linux, the board info and command line data
190 * have to be in the first 8 MB of memory, since this is
191 * the maximum mapped by the Linux kernel during initialization.
192 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200193#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkf12e5682003-07-07 20:07:54 +0000194
195/*-----------------------------------------------------------------------
196 * FLASH organization
197 */
Martin Krausee318d9e2007-09-27 11:10:08 +0200198/* use CFI flash driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200200#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200201#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
202#define CONFIG_SYS_FLASH_EMPTY_INFO
203#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
204#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
205#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
wdenkf12e5682003-07-07 20:07:54 +0000206
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200207#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200208#define CONFIG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
209#define CONFIG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
210#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
wdenkf12e5682003-07-07 20:07:54 +0000211
212/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200213#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
214#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
wdenkf12e5682003-07-07 20:07:54 +0000215
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
Wolfgang Denk67c31032007-09-16 17:10:04 +0200217
Wolfgang Denk7c803be2008-09-16 18:02:19 +0200218#define CONFIG_MISC_INIT_R /* Make sure to remap flashes correctly */
219
wdenkf12e5682003-07-07 20:07:54 +0000220/*-----------------------------------------------------------------------
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200221 * Dynamic MTD partition support
222 */
Stefan Roese68d7d652009-03-19 13:30:36 +0100223#define CONFIG_CMD_MTDPARTS
Stefan Roese942556a2009-05-12 14:32:58 +0200224#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
225#define CONFIG_FLASH_CFI_MTD
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200226#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
227
228#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
229 "128k(dtb)," \
230 "1920k(kernel)," \
231 "5632(rootfs)," \
Wolfgang Denkcd829192008-08-12 16:08:38 +0200232 "4m(data)"
Wolfgang Denk29f8f582008-08-09 23:17:32 +0200233
234/*-----------------------------------------------------------------------
wdenkf12e5682003-07-07 20:07:54 +0000235 * Hardware Information Block
236 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200237#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
238#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
239#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
wdenkf12e5682003-07-07 20:07:54 +0000240
241/*-----------------------------------------------------------------------
242 * Cache Configuration
243 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200244#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger26946902007-07-04 22:30:50 -0500245#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200246#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenkf12e5682003-07-07 20:07:54 +0000247#endif
248
249/*-----------------------------------------------------------------------
250 * SYPCR - System Protection Control 11-9
251 * SYPCR can only be written once after reset!
252 *-----------------------------------------------------------------------
253 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
254 */
255#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200256#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
wdenkf12e5682003-07-07 20:07:54 +0000257 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
258#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200259#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
wdenkf12e5682003-07-07 20:07:54 +0000260#endif
261
262/*-----------------------------------------------------------------------
263 * SIUMCR - SIU Module Configuration 11-6
264 *-----------------------------------------------------------------------
265 * PCMCIA config., multi-function pin tri-state
266 */
267#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200268#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenkf12e5682003-07-07 20:07:54 +0000269#else /* we must activate GPL5 in the SIUMCR for CAN */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200270#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenkf12e5682003-07-07 20:07:54 +0000271#endif /* CONFIG_CAN_DRIVER */
272
273/*-----------------------------------------------------------------------
274 * TBSCR - Time Base Status and Control 11-26
275 *-----------------------------------------------------------------------
276 * Clear Reference Interrupt Status, Timebase freezing enabled
277 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200278#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
wdenkf12e5682003-07-07 20:07:54 +0000279
280/*-----------------------------------------------------------------------
281 * RTCSC - Real-Time Clock Status and Control Register 11-27
282 *-----------------------------------------------------------------------
283 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200284#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
wdenkf12e5682003-07-07 20:07:54 +0000285
286/*-----------------------------------------------------------------------
287 * PISCR - Periodic Interrupt Status and Control 11-31
288 *-----------------------------------------------------------------------
289 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
290 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200291#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
wdenkf12e5682003-07-07 20:07:54 +0000292
293/*-----------------------------------------------------------------------
294 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
295 *-----------------------------------------------------------------------
296 * Reset PLL lock status sticky bit, timer expired status bit and timer
297 * interrupt status bit
wdenkf12e5682003-07-07 20:07:54 +0000298 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200299#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
wdenkf12e5682003-07-07 20:07:54 +0000300
301/*-----------------------------------------------------------------------
302 * SCCR - System Clock and reset Control Register 15-27
303 *-----------------------------------------------------------------------
304 * Set clock output, timebase and RTC source and divider,
305 * power management and some other internal clocks
306 */
307#define SCCR_MASK SCCR_EBDF11
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200308#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenkf12e5682003-07-07 20:07:54 +0000309 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
310 SCCR_DFALCD00)
wdenkf12e5682003-07-07 20:07:54 +0000311
312/*-----------------------------------------------------------------------
313 * PCMCIA stuff
314 *-----------------------------------------------------------------------
315 *
316 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200317#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
318#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
319#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
320#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
321#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
322#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
323#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
324#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
wdenkf12e5682003-07-07 20:07:54 +0000325
326/*-----------------------------------------------------------------------
327 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
328 *-----------------------------------------------------------------------
329 */
330
331#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
332
333#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
334#undef CONFIG_IDE_LED /* LED for ide not supported */
335#undef CONFIG_IDE_RESET /* reset for ide not supported */
336
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200337#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
338#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
wdenkf12e5682003-07-07 20:07:54 +0000339
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200340#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
wdenkf12e5682003-07-07 20:07:54 +0000341
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200342#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
wdenkf12e5682003-07-07 20:07:54 +0000343
344/* Offset for data I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200345#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenkf12e5682003-07-07 20:07:54 +0000346
347/* Offset for normal register accesses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200348#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenkf12e5682003-07-07 20:07:54 +0000349
350/* Offset for alternate registers */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200351#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
wdenkf12e5682003-07-07 20:07:54 +0000352
353/*-----------------------------------------------------------------------
354 *
355 *-----------------------------------------------------------------------
356 *
357 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200358#define CONFIG_SYS_DER 0
wdenkf12e5682003-07-07 20:07:54 +0000359
360/*
361 * Init Memory Controller:
362 *
363 * BR0/1 and OR0/1 (FLASH)
364 */
365
366#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
367#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
368
369/* used to re-map FLASH both when starting from SRAM or FLASH:
370 * restrict access enough to keep SRAM working (if any)
371 * but not too much to meddle with FLASH accesses
372 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200373#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
374#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
wdenkf12e5682003-07-07 20:07:54 +0000375
376/*
377 * FLASH timing:
378 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200379#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
wdenkf12e5682003-07-07 20:07:54 +0000380 OR_SCY_3_CLK | OR_EHTR | OR_BI)
wdenkf12e5682003-07-07 20:07:54 +0000381
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200382#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
383#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
384#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
wdenkf12e5682003-07-07 20:07:54 +0000385
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200386#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
387#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
388#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
wdenkf12e5682003-07-07 20:07:54 +0000389
390/*
391 * BR2/3 and OR2/3 (SDRAM)
392 *
393 */
394#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
395#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
Jens Gehrleindabad4b2007-09-27 14:54:46 +0200396#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB per bank */
wdenkf12e5682003-07-07 20:07:54 +0000397
398/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200399#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
wdenkf12e5682003-07-07 20:07:54 +0000400
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200401#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
402#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenkf12e5682003-07-07 20:07:54 +0000403
404#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200405#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
406#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenkf12e5682003-07-07 20:07:54 +0000407#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200408#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
409#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
410#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
411#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
wdenkf12e5682003-07-07 20:07:54 +0000412 BR_PS_8 | BR_MS_UPMB | BR_V )
413#endif /* CONFIG_CAN_DRIVER */
414
415/*
416 * Memory Periodic Timer Prescaler
417 *
418 * The Divider for PTA (refresh timer) configuration is based on an
419 * example SDRAM configuration (64 MBit, one bank). The adjustment to
420 * the number of chip selects (NCS) and the actually needed refresh
421 * rate is done by setting MPTPR.
422 *
423 * PTA is calculated from
424 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
425 *
426 * gclk CPU clock (not bus clock!)
427 * Trefresh Refresh cycle * 4 (four word bursts used)
428 *
429 * 4096 Rows from SDRAM example configuration
430 * 1000 factor s -> ms
431 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
432 * 4 Number of refresh cycles per period
433 * 64 Refresh cycle in ms per number of rows
434 * --------------------------------------------
435 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
436 *
437 * 50 MHz => 50.000.000 / Divider = 98
438 * 66 Mhz => 66.000.000 / Divider = 129
439 * 80 Mhz => 80.000.000 / Divider = 156
440 */
wdenke9132ea2004-04-24 23:23:30 +0000441
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200442#define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
443#define CONFIG_SYS_MAMR_PTA 98
wdenkf12e5682003-07-07 20:07:54 +0000444
445/*
446 * For 16 MBit, refresh rates could be 31.3 us
447 * (= 64 ms / 2K = 125 / quad bursts).
448 * For a simpler initialization, 15.6 us is used instead.
449 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200450 * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
451 * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
wdenkf12e5682003-07-07 20:07:54 +0000452 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200453#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
454#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
wdenkf12e5682003-07-07 20:07:54 +0000455
456/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200457#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
458#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
wdenkf12e5682003-07-07 20:07:54 +0000459
460/*
461 * MAMR settings for SDRAM
462 */
463
464/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200465#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenkf12e5682003-07-07 20:07:54 +0000466 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
467 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
468/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200469#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenkf12e5682003-07-07 20:07:54 +0000470 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
471 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
Jens Gehrleindabad4b2007-09-27 14:54:46 +0200472/* 10 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200473#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Jens Gehrleindabad4b2007-09-27 14:54:46 +0200474 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \
475 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
wdenkf12e5682003-07-07 20:07:54 +0000476
477/*
478 * Internal Definitions
479 *
480 * Boot Flags
481 */
482#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
483#define BOOTFLAG_WARM 0x02 /* Software reboot */
484
485#define CONFIG_SCC1_ENET
486#define CONFIG_FEC_ENET
487#define CONFIG_ETHPRIME "SCC ETHERNET"
488
489#endif /* __CONFIG_H */