blob: 3db8171fb327b3f2c5170bf29910152b7b858da7 [file] [log] [blame]
Mike Frysinger84a9dda2008-10-12 21:32:52 -04001/*
2 * U-boot - Configuration file for BF518F EZBrd board
3 */
4
5#ifndef __CONFIG_BF518F_EZBRD_H__
6#define __CONFIG_BF518F_EZBRD_H__
7
Mike Frysingerf348ab82009-04-24 17:22:40 -04008#include <asm/config-pre.h>
Mike Frysinger84a9dda2008-10-12 21:32:52 -04009
10
11/*
12 * Processor Settings
13 */
14#define CONFIG_BFIN_CPU bf518-0.0
15#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
16
17
18/*
19 * Clock Settings
20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
22 */
23/* CONFIG_CLKIN_HZ is any value in Hz */
24#define CONFIG_CLKIN_HZ 25000000
25/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
26/* 1 = CLKIN / 2 */
27#define CONFIG_CLKIN_HALF 0
28/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
29/* 1 = bypass PLL */
30#define CONFIG_PLL_BYPASS 0
31/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
32/* Values can range from 0-63 (where 0 means 64) */
33#define CONFIG_VCO_MULT 16
34/* CCLK_DIV controls the core clock divider */
35/* Values can be 1, 2, 4, or 8 ONLY */
36#define CONFIG_CCLK_DIV 1
37/* SCLK_DIV controls the system clock divider */
38/* Values can range from 1-15 */
39#define CONFIG_SCLK_DIV 5
40
41
42/*
43 * Memory Settings
44 */
45/* This board has a 64meg MT48H32M16 */
46#define CONFIG_MEM_ADD_WDTH 10
47#define CONFIG_MEM_SIZE 64
48
49#define CONFIG_EBIU_SDRRC_VAL 0x0096
50#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS)
51
52#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL)
53#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
54#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
55
56#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
57#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
58
59
60/*
61 * Network Settings
62 */
63#if !defined(__ADSPBF512__) && !defined(__ADSPBF514__)
64#define ADI_CMDS_NETWORK 1
65#define CONFIG_BFIN_MAC
66#define CONFIG_NETCONSOLE 1
67#define CONFIG_NET_MULTI 1
68#endif
69#define CONFIG_HOSTNAME bf518f-ezbrd
70#define CONFIG_PHY_ADDR 3
71/* Uncomment next line to use fixed MAC address */
72/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
73
74
75/*
76 * Flash Settings
77 */
78#define CONFIG_FLASH_CFI_DRIVER
79#define CONFIG_SYS_FLASH_BASE 0x20000000
80#define CONFIG_SYS_FLASH_CFI
81#define CONFIG_SYS_FLASH_PROTECTION
82#define CONFIG_SYS_MAX_FLASH_BANKS 1
83#define CONFIG_SYS_MAX_FLASH_SECT 71
84
85
86/*
87 * SPI Settings
88 */
89#define CONFIG_BFIN_SPI
90#define CONFIG_ENV_SPI_MAX_HZ 30000000
Mike Frysingerafac8b02009-06-14 22:29:35 -040091#define CONFIG_SF_DEFAULT_SPEED 30000000
Mike Frysinger84a9dda2008-10-12 21:32:52 -040092#define CONFIG_SPI_FLASH
Mike Frysingerf52efca2009-05-29 17:02:37 -040093#define CONFIG_SPI_FLASH_SST
Mike Frysinger84a9dda2008-10-12 21:32:52 -040094#define CONFIG_SPI_FLASH_STMICRO
95
96
97/*
98 * Env Storage Settings
99 */
100#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
101#define CONFIG_ENV_IS_IN_SPI_FLASH
102#define CONFIG_ENV_OFFSET 0x10000
103#define CONFIG_ENV_SIZE 0x2000
104#define CONFIG_ENV_SECT_SIZE 0x10000
105#else
106#define CONFIG_ENV_IS_IN_FLASH
107#define CONFIG_ENV_OFFSET 0x4000
108#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
109#define CONFIG_ENV_SIZE 0x2000
110#define CONFIG_ENV_SECT_SIZE 0x2000
111#endif
112#define ENV_IS_EMBEDDED_CUSTOM
113
114
115/*
116 * I2C Settings
117 */
118#define CONFIG_BFIN_TWI_I2C 1
119#define CONFIG_HARD_I2C 1
120#define CONFIG_SYS_I2C_SPEED 50000
121#define CONFIG_SYS_I2C_SLAVE 0
122
123
124/*
125 * SDH Settings
126 */
127#if !defined(__ADSPBF512__)
128#define CONFIG_MMC
129#define CONFIG_BFIN_SDH
130#endif
131
132
133/*
134 * Misc Settings
135 */
Graf Yangab687902009-05-24 02:34:34 -0400136#define CONFIG_BOARD_EARLY_INIT_F
Mike Frysinger84a9dda2008-10-12 21:32:52 -0400137#define CONFIG_MISC_INIT_R
138#define CONFIG_RTC_BFIN
139#define CONFIG_UART_CONSOLE 0
140
141
142/*
143 * Pull in common ADI header for remaining command/environment setup
144 */
145#include <configs/bfin_adi_common.h>
146
Mike Frysinger84a9dda2008-10-12 21:32:52 -0400147#endif