blob: 2bbf53d957b1099c62587bb6ef2c803a4be0497d [file] [log] [blame]
Jason Hobbs06283a62011-08-31 10:37:30 -05001/*
2 * Copyright 2010-2011 Calxeda, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the Free
6 * Software Foundation; either version 2 of the License, or (at your option)
7 * any later version.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program. If not, see <http://www.gnu.org/licenses/>.
16 */
17
18The 'pxe' commands provide a near subset of the functionality provided by
19the PXELINUX boot loader. This allows U-boot based systems to be controlled
20remotely using the same PXE based techniques that many non U-boot based servers
21use.
22
23Commands
24========
25
26pxe get
27-------
28 syntax: pxe get
29
30 follows PXELINUX's rules for retrieving configuration files from a tftp
31 server, and supports a subset of PXELINUX's config file syntax.
32
33 Environment
34 -----------
35 'pxe get' requires two environment variables to be set:
36
37 pxefile_addr_r - should be set to a location in RAM large enough to hold
38 pxe files while they're being processed. Up to 16 config files may be
39 held in memory at once. The exact number and size of the files varies with
40 how the system is being used. A typical config file is a few hundred bytes
41 long.
42
43 bootfile,serverip - these two are typically set in the DHCP response
44 handler, and correspond to fields in the DHCP response.
45
46 'pxe get' optionally supports these two environment variables being set:
47
48 ethaddr - this is the standard MAC address for the ethernet adapter in use.
49 'pxe get' uses it to look for a configuration file specific to a system's
50 MAC address.
51
52 pxeuuid - this is a UUID in standard form using lower case hexadecimal
53 digits, for example, 550e8400-e29b-41d4-a716-446655440000. 'pxe get' uses
54 it to look for a configuration file based on the system's UUID.
55
56 File Paths
57 ----------
58 'pxe get' repeatedly tries to download config files until it either
59 successfully downloads one or runs out of paths to try. The order and
60 contents of paths it tries mirrors exactly that of PXELINUX - you can
61 read in more detail about it at:
62
63 http://syslinux.zytor.com/wiki/index.php/Doc/pxelinux
64
65pxe boot
66--------
67 syntax: pxe boot [pxefile_addr_r]
68
69 Interprets a pxe file stored in memory.
70
71 pxefile_addr_r is an optional argument giving the location of the pxe file.
72 The file must be terminated with a NUL byte.
73
74 Environment
75 -----------
76 There are some environment variables that may need to be set, depending
77 on conditions.
78
79 pxefile_addr_r - if the optional argument pxefile_addr_r is not supplied,
80 an environment variable named pxefile_addr_r must be supplied. This is
81 typically the same value as is used for the 'pxe get' command.
82
83 bootfile - typically set in the DHCP response handler based on the
84 same field in the DHCP respone, this path is used to generate the base
85 directory that all other paths to files retrieved by 'pxe boot' will use.
86 If no bootfile is specified, paths used in pxe files will be used as is.
87
88 serverip - typically set in the DHCP response handler, this is the IP
89 address of the tftp server from which other files will be retrieved.
90
91 kernel_addr_r, initrd_addr_r - locations in RAM at which 'pxe boot' will
92 store the kernel and initrd it retrieves from tftp. These locations will
93 be passed to the bootm command to boot the kernel. These environment
94 variables are required to be set.
95
96 fdt_addr - the location of a fdt blob. If this is set, it will be passed
97 to bootm when booting a kernel.
98
99pxe file format
100===============
101The pxe file format is nearly a subset of the PXELINUX file format; see
102http://syslinux.zytor.com/wiki/index.php/PXELINUX. It's composed of one line
103commands - global commands, and commands specific to labels. Lines begining
104with # are treated as comments. White space between and at the beginning of
105lines is ignored.
106
107The size of pxe files and the number of labels is only limited by the amount
108of RAM available to U-boot. Memory for labels is dynamically allocated as
109they're parsed, and memory for pxe files is statically allocated, and its
110location is given by the pxefile_addr_r environment variable. The pxe code is
111not aware of the size of the pxefile memory and will outgrow it if pxe files
112are too large.
113
114Supported global commands
115-------------------------
116Unrecognized commands are ignored.
117
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100118default <label> - the label named here is treated as the default and is
119 the first label 'pxe boot' attempts to boot.
Jason Hobbs06283a62011-08-31 10:37:30 -0500120
121menu title <string> - sets a title for the menu of labels being displayed.
122
123menu include <path> - use tftp to retrieve the pxe file at <path>, which
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100124 is then immediately parsed as if the start of its
125 contents were the next line in the current file. nesting
126 of include up to 16 files deep is supported.
Jason Hobbs06283a62011-08-31 10:37:30 -0500127
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100128prompt <flag> - if 1, always prompt the user to enter a label to boot
129 from. if 0, only prompt the user if timeout expires.
Jason Hobbs06283a62011-08-31 10:37:30 -0500130
131timeout <num> - wait for user input for <num>/10 seconds before
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100132 auto-booting a node.
Jason Hobbs06283a62011-08-31 10:37:30 -0500133
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100134label <name> - begin a label definition. labels continue until
135 a command not recognized as a label command is seen,
136 or EOF is reached.
Jason Hobbs06283a62011-08-31 10:37:30 -0500137
138Supported label commands
139------------------------
140labels end when a command not recognized as a label command is reached, or EOF.
141
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100142menu default - set this label as the default label to boot; this is
143 the same behavior as the global default command but
144 specified in a different way
Jason Hobbs06283a62011-08-31 10:37:30 -0500145
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100146kernel <path> - if this label is chosen, use tftp to retrieve the kernel
147 at <path>. it will be stored at the address indicated in
148 the kernel_addr_r environment variable, and that address
149 will be passed to bootm to boot this kernel.
Jason Hobbs06283a62011-08-31 10:37:30 -0500150
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100151append <string> - use <string> as the kernel command line when booting this
152 label.
Jason Hobbs06283a62011-08-31 10:37:30 -0500153
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100154initrd <path> - if this label is chosen, use tftp to retrieve the initrd
155 at <path>. it will be stored at the address indicated in
156 the initrd_addr_r environment variable, and that address
157 will be passed to bootm.
Jason Hobbs06283a62011-08-31 10:37:30 -0500158
159localboot <flag> - Run the command defined by "localcmd" in the environment.
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100160 <flag> is ignored and is only here to match the syntax of
161 PXELINUX config files.
Jason Hobbs06283a62011-08-31 10:37:30 -0500162
163Example
164-------
165Here's a couple of example files to show how this works.
166
167------------/tftpboot/pxelinux.cfg/menus/linux.list----------
168menu title Linux selections
169
170# This is the default label
171label install
172 menu label Default Install Image
173 kernel kernels/install.bin
174 append console=ttyAMA0,38400 debug earlyprintk
175 initrd initrds/uzInitrdDebInstall
176
177# Just another label
178label linux-2.6.38
179 kernel kernels/linux-2.6.38.bin
180 append root=/dev/sdb1
181
182# The locally installed kernel
183label local
184 menu label Locally installed kernel
185 append root=/dev/sdb1
186 localboot 1
187-------------------------------------------------------------
188
189------------/tftpboot/pxelinux.cfg/default-------------------
190menu include pxelinux.cfg/menus/base.menu
191timeout 500
192
193default linux-2.6.38
194-------------------------------------------------------------
195
196When a pxe client retrieves and boots the default pxe file,
197'pxe boot' will wait for user input for 5 seconds before booting
198the linux-2.6.38 label, which will cause /tftpboot/kernels/linux-2.6.38.bin
199to be downloaded, and boot with the command line "root=/dev/sdb1"
200
201Differences with PXELINUX
202=========================
203The biggest difference between U-boot's pxe and PXELINUX is that since
204U-boot's pxe support is written entirely in C, it can run on any platform
205with network support in U-boot. Here are some other differences between
206PXELINUX and U-boot's pxe support.
207
208- U-boot's pxe does not support the PXELINUX DHCP option codes specified
209 in RFC 5071, but could be extended to do so.
210
211- when U-boot's pxe fails to boot, it will return control to U-boot,
212 allowing another command to run, other U-boot command, instead of resetting
213 the machine like PXELINUX.
214
215- U-boot's pxe doesn't rely on or provide an UNDI/PXE stack in memory, it
216 only uses U-boot.
217
218- U-boot's pxe doesn't provide the full menu implementation that PXELINUX
219 does, only a simple text based menu using the commands described in
Wolfgang Denk6b62b9a2011-12-19 12:03:40 +0100220 this README. With PXELINUX, it's possible to have a graphical boot
Jason Hobbs06283a62011-08-31 10:37:30 -0500221 menu, submenus, passwords, etc. U-boot's pxe could be extended to support
222 a more robust menuing system like that of PXELINUX's.
223
224- U-boot's pxe expects U-boot uimg's as kernels. Anything that would work
225 with the 'bootm' command in U-boot could work with the 'pxe boot' command.
226
Jason Hobbs06283a62011-08-31 10:37:30 -0500227- U-boot's pxe only recognizes a single file on the initrd command line. It
228 could be extended to support multiple.
229
230- in U-boot's pxe, the localboot command doesn't necessarily cause a local
231 disk boot - it will do whatever is defined in the 'localcmd' env
232 variable. And since it doesn't support a full UNDI/PXE stack, the
233 type field is ignored.
234
235- the interactive prompt in U-boot's pxe only allows you to choose a label
236 from the menu. If you want to boot something not listed, you can ctrl+c
237 out of 'pxe boot' and use existing U-boot commands to accomplish it.