blob: b3aadcace32430165d0d44ea304ecf1a1449f4c4 [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/******************************************************************************
Josh Boyer31773492009-08-07 13:53:20 -04002 * This source code is dual-licensed. You may use it under the terms of the
3 * GNU General Public License version 2, or under the license below.
wdenkc6097192002-11-03 00:24:07 +00004 *
5 * This source code has been made available to you by IBM on an AS-IS
6 * basis. Anyone receiving this source is licensed under IBM
7 * copyrights to use it in any way he or she deems fit, including
8 * copying it, modifying it, compiling it, and redistributing it either
9 * with or without modifications. No license under IBM patents or
10 * patent applications is to be implied by the copyright license.
11 *
12 * Any user of this software should understand that IBM cannot provide
13 * technical support for this software and will not be responsible for
14 * any consequences resulting from the use of this software.
15 *
16 * Any person who transfers this source code or any derivative work
17 * must include the IBM copyright notice, this paragraph, and the
18 * preceding two paragraphs in the transferred software.
19 *
20 * COPYRIGHT I B M CORPORATION 1995
21 * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
22 *
23 *****************************************************************************/
24#include <config.h>
Stefan Roeseb36df562010-09-09 19:18:00 +020025#include <asm/ppc4xx.h>
wdenkc6097192002-11-03 00:24:07 +000026
27#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
28
29#include <ppc_asm.tmpl>
30#include <ppc_defs.h>
31
32#include <asm/cache.h>
33#include <asm/mmu.h>
34
35/******************************************************************************
36 * Function: ext_bus_cntlr_init
37 *
38 * Description: Configures EBC Controller and a few basic chip selects.
39 *
40 * CS0 is setup to get the Boot Flash out of the addresss range
41 * so that we may setup a stack. CS7 is setup so that we can
42 * access and reset the hardware watchdog.
43 *
44 * IMPORTANT: For pass1 this code must run from
45 * cache since you can not reliably change a peripheral banks
46 * timing register (pbxap) while running code from that bank.
47 * For ex., since we are running from ROM on bank 0, we can NOT
48 * execute the code that modifies bank 0 timings from ROM, so
49 * we run it from cache.
50 *
51 * Notes: Does NOT use the stack.
52 *****************************************************************************/
53 .section ".text"
54 .align 2
55 .globl ext_bus_cntlr_init
56 .type ext_bus_cntlr_init, @function
57ext_bus_cntlr_init:
58 mflr r0
59 /********************************************************************
60 * Prefetch entire ext_bus_cntrl_init function into the icache.
61 * This is necessary because we are going to change the same CS we
62 * are executing from. Otherwise a CPU lockup may occur.
63 *******************************************************************/
64 bl ..getAddr
65..getAddr:
66 mflr r3 /* get address of ..getAddr */
67
68 /* Calculate number of cache lines for this function */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020069 addi r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
wdenkc6097192002-11-03 00:24:07 +000070 mtctr r4
71..ebcloop:
72 icbt r0, r3 /* prefetch cache line for addr in r3*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020073 addi r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
wdenkc6097192002-11-03 00:24:07 +000074 bdnz ..ebcloop /* continue for $CTR cache lines */
75
76 /********************************************************************
77 * Delay to ensure all accesses to ROM are complete before changing
78 * bank 0 timings. 200usec should be enough.
79 * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
80 *******************************************************************/
81 addis r3, 0, 0x0
82 ori r3, r3, 0xA000 /* wait 200us from reset */
83 mtctr r3
84..spinlp:
85 bdnz ..spinlp /* spin loop */
86
87 /********************************************************************
88 * Setup External Bus Controller (EBC).
89 *******************************************************************/
Stefan Roesed1c3b272009-09-09 16:25:29 +020090 addi r3, 0, EBC0_CFG
91 mtdcr EBC0_CFGADDR, r3
wdenkc6097192002-11-03 00:24:07 +000092 addis r4, 0, 0xb040 /* Device base timeout = 1024 cycles */
93 ori r4, r4, 0x0 /* Drive CS with external master */
Stefan Roesed1c3b272009-09-09 16:25:29 +020094 mtdcr EBC0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +000095
96 /********************************************************************
97 * Change PCIINT signal to PerWE
98 *******************************************************************/
Stefan Roesed1c3b272009-09-09 16:25:29 +020099 mfdcr r4, CPC0_CR1
wdenkc6097192002-11-03 00:24:07 +0000100 ori r4, r4, 0x4000
Stefan Roesed1c3b272009-09-09 16:25:29 +0200101 mtdcr CPC0_CR1, r4
wdenkc6097192002-11-03 00:24:07 +0000102
103 /********************************************************************
104 * Memory Bank 0 (Flash Bank 0) initialization
105 *******************************************************************/
Stefan Roesed1c3b272009-09-09 16:25:29 +0200106 addi r3, 0, PB1AP
107 mtdcr EBC0_CFGADDR, r3
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200108 addis r4, 0, CONFIG_SYS_W7O_EBC_PB0AP@h
109 ori r4, r4, CONFIG_SYS_W7O_EBC_PB0AP@l
Stefan Roesed1c3b272009-09-09 16:25:29 +0200110 mtdcr EBC0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +0000111
Stefan Roesed1c3b272009-09-09 16:25:29 +0200112 addi r3, 0, PB0CR
113 mtdcr EBC0_CFGADDR, r3
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200114 addis r4, 0, CONFIG_SYS_W7O_EBC_PB0CR@h
115 ori r4, r4, CONFIG_SYS_W7O_EBC_PB0CR@l
Stefan Roesed1c3b272009-09-09 16:25:29 +0200116 mtdcr EBC0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +0000117
118 /********************************************************************
119 * Memory Bank 7 LEDs - NEEDED BECAUSE OF HW WATCHDOG AND LEDs.
120 *******************************************************************/
Stefan Roesed1c3b272009-09-09 16:25:29 +0200121 addi r3, 0, PB7AP
122 mtdcr EBC0_CFGADDR, r3
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200123 addis r4, 0, CONFIG_SYS_W7O_EBC_PB7AP@h
124 ori r4, r4, CONFIG_SYS_W7O_EBC_PB7AP@l
Stefan Roesed1c3b272009-09-09 16:25:29 +0200125 mtdcr EBC0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +0000126
Stefan Roesed1c3b272009-09-09 16:25:29 +0200127 addi r3, 0, PB7CR
128 mtdcr EBC0_CFGADDR, r3
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200129 addis r4, 0, CONFIG_SYS_W7O_EBC_PB7CR@h
130 ori r4, r4, CONFIG_SYS_W7O_EBC_PB7CR@l
Stefan Roesed1c3b272009-09-09 16:25:29 +0200131 mtdcr EBC0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +0000132
133 /* We are all done */
134 mtlr r0 /* Restore link register */
135 blr /* Return to calling function */
136.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
137/* end ext_bus_cntlr_init() */
138
139/******************************************************************************
140 * Function: sdram_init
141 *
142 * Description: Configures SDRAM memory banks.
143 *
144 * Serial Presence Detect, "SPD," reads the SDRAM EEPROM
145 * via the IIC bus and then configures the SDRAM memory
146 * banks appropriately. If Auto Memory Configuration is
147 * is not used, it is assumed that a 4MB 11x8x2, non-ECC,
148 * SDRAM is soldered down.
149 *
150 * Notes: Expects that the stack is already setup.
151 *****************************************************************************/
152 .section ".text"
153 .align 2
154 .globl sdram_init
155 .type sdram_init, @function
156sdram_init:
157 /* save the return info on stack */
158 mflr r0 /* Get link register */
159 stwu r1, -8(r1) /* Save back chain and move SP */
160 stw r0, +12(r1) /* Save link register */
161
162 /*
163 * First call spd_sdram to try to init SDRAM according to the
164 * contents of the SPD EEPROM. If the SPD EEPROM is blank or
165 * erronious, spd_sdram returns 0 in R3.
166 */
wdenkdb2f721f2003-03-06 00:58:30 +0000167 li r3,0
wdenkc6097192002-11-03 00:24:07 +0000168 bl spd_sdram
169 addic. r3, r3, 0 /* Check for error, save dram size */
170 bne ..sdri_done /* If it worked, we're done... */
171
172 /********************************************************************
173 * If SPD detection fails, we'll default to 4MB, 11x8x2, as this
174 * is the SMALLEST SDRAM size the 405 supports. We can do this
175 * because W7O boards have soldered on RAM, and there will always
176 * be some amount present. If we were using DIMMs, we should hang
177 * the board instead, since it doesn't have any RAM to continue
178 * running with.
179 *******************************************************************/
180
181 /*
182 * Disable memory controller to allow
183 * values to be changed.
184 */
Stefan Roese95b602b2009-09-24 13:59:57 +0200185 addi r3, 0, SDRAM0_CFG
Stefan Roesed1c3b272009-09-09 16:25:29 +0200186 mtdcr SDRAM0_CFGADDR, r3
wdenkc6097192002-11-03 00:24:07 +0000187 addis r4, 0, 0x0
188 ori r4, r4, 0x0
Stefan Roesed1c3b272009-09-09 16:25:29 +0200189 mtdcr SDRAM0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +0000190
191 /*
192 * Set MB0CF for ext bank 0. (0-4MB) Address Mode 5 since 11x8x2
193 * All other banks are disabled.
194 */
Stefan Roese95b602b2009-09-24 13:59:57 +0200195 addi r3, 0, SDRAM0_B0CR
Stefan Roesed1c3b272009-09-09 16:25:29 +0200196 mtdcr SDRAM0_CFGADDR, r3
wdenkc6097192002-11-03 00:24:07 +0000197 addis r4, 0, 0x0000 /* BA=0x0, SZ=4MB */
198 ori r4, r4, 0x8001 /* Mode is 5, 11x8x2or4, BE=Enabled */
Stefan Roesed1c3b272009-09-09 16:25:29 +0200199 mtdcr SDRAM0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +0000200
201 /* Clear MB1CR,MB2CR,MB3CR to turn other banks off */
202 addi r4, 0, 0 /* Zero the data reg */
203
204 addi r3, r3, 4 /* Point to MB1CF reg */
Stefan Roesed1c3b272009-09-09 16:25:29 +0200205 mtdcr SDRAM0_CFGADDR, r3 /* Set the address */
206 mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */
wdenkc6097192002-11-03 00:24:07 +0000207
208 addi r3, r3, 4 /* Point to MB2CF reg */
Stefan Roesed1c3b272009-09-09 16:25:29 +0200209 mtdcr SDRAM0_CFGADDR, r3 /* Set the address */
210 mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */
wdenkc6097192002-11-03 00:24:07 +0000211
212 addi r3, r3, 4 /* Point to MB3CF reg */
Stefan Roesed1c3b272009-09-09 16:25:29 +0200213 mtdcr SDRAM0_CFGADDR, r3 /* Set the address */
214 mtdcr SDRAM0_CFGDATA, r4 /* Zero the reg */
wdenkc6097192002-11-03 00:24:07 +0000215
216 /********************************************************************
217 * Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR.
218 * To set the appropriate timings, we assume sdram is
219 * 100MHz (pc100 compliant).
220 *******************************************************************/
221
222 /*
223 * Set up SDTR1
224 */
Stefan Roese95b602b2009-09-24 13:59:57 +0200225 addi r3, 0, SDRAM0_TR
Stefan Roesed1c3b272009-09-09 16:25:29 +0200226 mtdcr SDRAM0_CFGADDR, r3
wdenkc6097192002-11-03 00:24:07 +0000227 addis r4, 0, 0x0086 /* SDTR1 value for 100Mhz */
228 ori r4, r4, 0x400D
Stefan Roesed1c3b272009-09-09 16:25:29 +0200229 mtdcr SDRAM0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +0000230
231 /*
232 * Set RTR
233 */
Stefan Roese95b602b2009-09-24 13:59:57 +0200234 addi r3, 0, SDRAM0_RTR
Stefan Roesed1c3b272009-09-09 16:25:29 +0200235 mtdcr SDRAM0_CFGADDR, r3
wdenkc6097192002-11-03 00:24:07 +0000236 addis r4, 0, 0x05F0 /* RTR refresh val = 15.625ms@100Mhz */
Stefan Roesed1c3b272009-09-09 16:25:29 +0200237 mtdcr SDRAM0_CFGDATA, r4
wdenkc6097192002-11-03 00:24:07 +0000238
239 /********************************************************************
240 * Delay to ensure 200usec have elapsed since reset. Assume worst
241 * case that the core is running 200Mhz:
242 * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
243 *******************************************************************/
244 addis r3, 0, 0x0000
245 ori r3, r3, 0xA000 /* Wait 200us from reset */
246 mtctr r3
247..spinlp2:
248 bdnz ..spinlp2 /* spin loop */
249
250 /********************************************************************
251 * Set memory controller options reg, MCOPT1.
252 *******************************************************************/
Stefan Roese95b602b2009-09-24 13:59:57 +0200253 addi r3, 0, SDRAM0_CFG
Stefan Roesed1c3b272009-09-09 16:25:29 +0200254 mtdcr SDRAM0_CFGADDR, r3
wdenkc6097192002-11-03 00:24:07 +0000255 addis r4, 0, 0x80E0 /* DC_EN=1,SRE=0,PME=0,MEMCHK=0 */
256 ori r4, r4, 0x0000 /* REGEN=0,DRW=00,BRPF=01,ECCDD=1 */
Stefan Roesed1c3b272009-09-09 16:25:29 +0200257 mtdcr SDRAM0_CFGDATA, r4 /* EMDULR=1 */
wdenkc6097192002-11-03 00:24:07 +0000258
259..sdri_done:
260 /* restore and return */
261 lwz r0, +12(r1) /* Get saved link register */
262 addi r1, r1, +8 /* Remove frame from stack */
263 mtlr r0 /* Restore link register */
264 blr /* Return to calling function */
265.Lfe1: .size sdram_init,.Lfe1-sdram_init
266/* end sdram_init() */