blob: 9fcc6430cd3c58370637880e7fcee64d9605312b [file] [log] [blame]
Dirk Eibacha605ea72010-10-21 10:50:05 +02001/*
2 * (C) Copyright 2010
3 * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#ifndef __CONFIG_H
25#define __CONFIG_H
26
27#define CONFIG_405EP 1 /* this is a PPC405 CPU */
28#define CONFIG_4xx 1 /* member of PPC4xx family */
29#define CONFIG_IOCON 1 /* on a IoCon board */
30
31#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
32
33/*
34 * Include common defines/options for all AMCC eval boards
35 */
36#define CONFIG_HOSTNAME iocon
37#define CONFIG_IDENT_STRING " iocon 0.03"
38#include "amcc-common.h"
39
40#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
41#define CONFIG_LAST_STAGE_INIT
42
43#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
44
45/*
46 * Configure PLL
47 */
48#define PLLMR0_DEFAULT PLLMR0_266_133_66
49#define PLLMR1_DEFAULT PLLMR1_266_133_66
50
51/* new uImage format support */
52#define CONFIG_FIT
53#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
54
55#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
56
57/*
58 * Default environment variables
59 */
60#define CONFIG_EXTRA_ENV_SETTINGS \
61 CONFIG_AMCC_DEF_ENV \
62 CONFIG_AMCC_DEF_ENV_POWERPC \
63 CONFIG_AMCC_DEF_ENV_NOR_UPD \
64 "kernel_addr=fc000000\0" \
65 "fdt_addr=fc1e0000\0" \
66 "ramdisk_addr=fc200000\0" \
67 ""
68
69#define CONFIG_PHY_ADDR 4 /* PHY address */
70#define CONFIG_HAS_ETH0
71#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ
72
73/*
74 * Commands additional to the ones defined in amcc-common.h
75 */
76#define CONFIG_CMD_CACHE
77#undef CONFIG_CMD_EEPROM
78
79/*
80 * SDRAM configuration (please see cpu/ppc/sdram.[ch])
81 */
82#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
83
84/* SDRAM timings used in datasheet */
85#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */
86#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */
87#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */
88#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
89#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */
90
91/*
92 * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
93 * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
94 * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
95 * The Linux BASE_BAUD define should match this configuration.
96 * baseBaud = cpuClock/(uartDivisor*16)
97 * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
98 * set Linux BASE_BAUD to 403200.
99 */
100#define CONFIG_CONS_INDEX 1 /* Use UART0 */
101#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
102#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
103#define CONFIG_SYS_BASE_BAUD 691200
104
105/*
106 * I2C stuff
107 */
108#define CONFIG_SYS_I2C_SPEED 400000
109
110/* enable I2C and select the hardware/software driver */
111#undef CONFIG_HARD_I2C /* I2C with hardware support */
112#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
113
114/*
115 * Software (bit-bang) I2C driver configuration
116 */
117
118#ifndef __ASSEMBLY__
119void fpga_gpio_set(int pin);
120void fpga_gpio_clear(int pin);
121int fpga_gpio_get(int pin);
122#endif
123
124#define I2C_ACTIVE { }
125#define I2C_TRISTATE { }
126#define I2C_READ fpga_gpio_get(0x0040) ? 1 : 0
127#define I2C_SDA(bit) if (bit) fpga_gpio_set(0x0040); \
128 else fpga_gpio_clear(0x0040)
129#define I2C_SCL(bit) if (bit) fpga_gpio_set(0x0020); \
130 else fpga_gpio_clear(0x0020)
131#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */
132
133/*
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100134 * OSD hardware
135 */
136#define CONFIG_SYS_MPC92469AC
137#define CONFIG_SYS_CH7301
138
139/*
Dirk Eibacha605ea72010-10-21 10:50:05 +0200140 * FLASH organization
141 */
142#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
143#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
144
145#define CONFIG_SYS_FLASH_BASE 0xFC000000
146#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
147
148#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
149#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/
150
151#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */
152#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */
153
154#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */
155#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */
156
157#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
158#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */
159
160#ifdef CONFIG_ENV_IS_IN_FLASH
161#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
162#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
163#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
164
165/* Address and size of Redundant Environment Sector */
166#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
167#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
168#endif
169
170/*
171 * PPC405 GPIO Configuration
172 */
173#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \
174{ \
175/* GPIO Core 0 */ \
176{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
177{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
178{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
179{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
180{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
181{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
182{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
183{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
184{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
185{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
186{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
187{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
188{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
189{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
190{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
191{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
192{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
193{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
194{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
195{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
196{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
197{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
198{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
199{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
200{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
201{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
202{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
203{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
204{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
205{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
206{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
207{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
208} \
209}
210
211/*
212 * Definitions for initial stack pointer and data area (in data cache)
213 */
214/* use on chip memory (OCM) for temperary stack until sdram is tested */
215#define CONFIG_SYS_TEMP_STACK_OCM 1
216
217/* On Chip Memory location */
218#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
219#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
220#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
221#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
222
223#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size/bytes res'd for init data*/
224#define CONFIG_SYS_GBL_DATA_OFFSET \
225 (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
226#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
227
228/*
229 * External Bus Controller (EBC) Setup
230 */
231
232/* Memory Bank 0 (NOR-FLASH) initialization */
233#define CONFIG_SYS_EBC_PB0AP 0xa382a880
234#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000
235
236/* Memory Bank 1 (NVRAM) initializatio */
237#define CONFIG_SYS_EBC_PB1AP 0x92015480
238#define CONFIG_SYS_EBC_PB1CR 0xFB858000
239
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100240/* Memory Bank 2 (FPGA0) initialization */
241#define CONFIG_SYS_FPGA0_BASE 0x7f100000
Dirk Eibacha605ea72010-10-21 10:50:05 +0200242#define CONFIG_SYS_EBC_PB2AP 0x02825080
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100243#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA0_BASE | 0x1a000)
Dirk Eibacha605ea72010-10-21 10:50:05 +0200244
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100245#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE
246#define CONFIG_SYS_FPGA_DONE(k) 0x0010
247
248#define CONFIG_SYS_FPGA_COUNT 1
Dirk Eibacha605ea72010-10-21 10:50:05 +0200249
250/* Memory Bank 3 (Latches) initialization */
251#define CONFIG_SYS_LATCH_BASE 0x7f200000
252#define CONFIG_SYS_EBC_PB3AP 0x02025080
253#define CONFIG_SYS_EBC_PB3CR 0x7f21a000
254
255#define CONFIG_SYS_LATCH0_RESET 0xffef
256#define CONFIG_SYS_LATCH0_BOOT 0xffff
257#define CONFIG_SYS_LATCH1_RESET 0xffff
258#define CONFIG_SYS_LATCH1_BOOT 0xffff
259
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100260/*
261 * OSD Setup
262 */
263#define CONFIG_SYS_MPC92469AC
264#define CONFIG_SYS_CH7301
265#define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT
266
Dirk Eibacha605ea72010-10-21 10:50:05 +0200267#endif /* __CONFIG_H */