blob: b3e9b61baeb547574c248598c03965eecd0e27af [file] [log] [blame]
Lokesh Vutla3819ea72016-05-16 11:24:28 +05301/*
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/*
10 * AM335x Starter Kit
11 * http://www.ti.com/tool/tmdssk3358
12 */
13
14/dts-v1/;
15
16#include "am33xx.dtsi"
17#include <dt-bindings/pwm/pwm.h>
18#include <dt-bindings/interrupt-controller/irq.h>
19
20/ {
21 model = "TI AM335x EVM-SK";
22 compatible = "ti,am335x-evmsk", "ti,am33xx";
23
24 chosen {
25 stdout-path = &uart0;
26 tick-timer = &timer2;
27 };
28
29 cpus {
30 cpu@0 {
31 cpu0-supply = <&vdd1_reg>;
32 };
33 };
34
35 memory {
36 device_type = "memory";
37 reg = <0x80000000 0x10000000>; /* 256 MB */
38 };
39
40 vbat: fixedregulator@0 {
41 compatible = "regulator-fixed";
42 regulator-name = "vbat";
43 regulator-min-microvolt = <5000000>;
44 regulator-max-microvolt = <5000000>;
45 regulator-boot-on;
46 };
47
48 lis3_reg: fixedregulator@1 {
49 compatible = "regulator-fixed";
50 regulator-name = "lis3_reg";
51 regulator-boot-on;
52 };
53
54 wl12xx_vmmc: fixedregulator@2 {
55 pinctrl-names = "default";
56 pinctrl-0 = <&wl12xx_gpio>;
57 compatible = "regulator-fixed";
58 regulator-name = "vwl1271";
59 regulator-min-microvolt = <1800000>;
60 regulator-max-microvolt = <1800000>;
61 gpio = <&gpio1 29 0>;
62 startup-delay-us = <70000>;
63 enable-active-high;
64 };
65
66 vtt_fixed: fixedregulator@3 {
67 compatible = "regulator-fixed";
68 regulator-name = "vtt";
69 regulator-min-microvolt = <1500000>;
70 regulator-max-microvolt = <1500000>;
71 gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
72 regulator-always-on;
73 regulator-boot-on;
74 enable-active-high;
75 };
76
77 leds {
78 pinctrl-names = "default";
79 pinctrl-0 = <&user_leds_s0>;
80
81 compatible = "gpio-leds";
82
83 led@1 {
84 label = "evmsk:green:usr0";
85 gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
86 default-state = "off";
87 };
88
89 led@2 {
90 label = "evmsk:green:usr1";
91 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
92 default-state = "off";
93 };
94
95 led@3 {
96 label = "evmsk:green:mmc0";
97 gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
98 linux,default-trigger = "mmc0";
99 default-state = "off";
100 };
101
102 led@4 {
103 label = "evmsk:green:heartbeat";
104 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
105 linux,default-trigger = "heartbeat";
106 default-state = "off";
107 };
108 };
109
110 gpio_buttons: gpio_buttons@0 {
111 compatible = "gpio-keys";
112 #address-cells = <1>;
113 #size-cells = <0>;
114
115 switch@1 {
116 label = "button0";
117 linux,code = <0x100>;
118 gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
119 };
120
121 switch@2 {
122 label = "button1";
123 linux,code = <0x101>;
124 gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
125 };
126
127 switch@3 {
128 label = "button2";
129 linux,code = <0x102>;
130 gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
131 wakeup-source;
132 };
133
134 switch@4 {
135 label = "button3";
136 linux,code = <0x103>;
137 gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
138 };
139 };
140
141 backlight {
142 compatible = "pwm-backlight";
143 pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
144 brightness-levels = <0 58 61 66 75 90 125 170 255>;
145 default-brightness-level = <8>;
146 };
147
148 sound {
149 compatible = "simple-audio-card";
150 simple-audio-card,name = "AM335x-EVMSK";
151 simple-audio-card,widgets =
152 "Headphone", "Headphone Jack";
153 simple-audio-card,routing =
154 "Headphone Jack", "HPLOUT",
155 "Headphone Jack", "HPROUT";
156 simple-audio-card,format = "dsp_b";
157 simple-audio-card,bitclock-master = <&sound_master>;
158 simple-audio-card,frame-master = <&sound_master>;
159 simple-audio-card,bitclock-inversion;
160
161 simple-audio-card,cpu {
162 sound-dai = <&mcasp1>;
163 };
164
165 sound_master: simple-audio-card,codec {
166 sound-dai = <&tlv320aic3106>;
167 system-clock-frequency = <24000000>;
168 };
169 };
170
171 panel {
172 compatible = "ti,tilcdc,panel";
173 pinctrl-names = "default", "sleep";
174 pinctrl-0 = <&lcd_pins_default>;
175 pinctrl-1 = <&lcd_pins_sleep>;
176 status = "okay";
177 panel-info {
178 ac-bias = <255>;
179 ac-bias-intrpt = <0>;
180 dma-burst-sz = <16>;
181 bpp = <32>;
182 fdd = <0x80>;
183 sync-edge = <0>;
184 sync-ctrl = <1>;
185 raster-order = <0>;
186 fifo-th = <0>;
187 };
188 display-timings {
189 480x272 {
190 hactive = <480>;
191 vactive = <272>;
192 hback-porch = <43>;
193 hfront-porch = <8>;
194 hsync-len = <4>;
195 vback-porch = <12>;
196 vfront-porch = <4>;
197 vsync-len = <10>;
198 clock-frequency = <9000000>;
199 hsync-active = <0>;
200 vsync-active = <0>;
201 };
202 };
203 };
204};
205
206&am33xx_pinmux {
207 pinctrl-names = "default";
208 pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
209
210 lcd_pins_default: lcd_pins_default {
211 pinctrl-single,pins = <
212 AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
213 AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
214 AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
215 AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
216 AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
217 AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
218 AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
219 AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
220 AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
221 AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
222 AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
223 AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
224 AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
225 AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
226 AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
227 AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
228 AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
229 AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
230 AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
231 AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
232 AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
233 AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
234 AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
235 AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
236 AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
237 AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
238 AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
239 AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
240 >;
241 };
242
243 lcd_pins_sleep: lcd_pins_sleep {
244 pinctrl-single,pins = <
245 AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */
246 AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */
247 AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */
248 AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */
249 AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */
250 AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */
251 AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */
252 AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */
253 AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
254 AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
255 AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
256 AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
257 AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
258 AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
259 AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
260 AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
261 AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
262 AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
263 AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
264 AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
265 AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
266 AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
267 AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
268 AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
269 AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */
270 AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
271 AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
272 AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
273 >;
274 };
275
276
277 user_leds_s0: user_leds_s0 {
278 pinctrl-single,pins = <
279 AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
280 AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
281 AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
282 AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
283 >;
284 };
285
286 gpio_keys_s0: gpio_keys_s0 {
287 pinctrl-single,pins = <
288 AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
289 AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
290 AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
291 AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
292 >;
293 };
294
295 i2c0_pins: pinmux_i2c0_pins {
296 pinctrl-single,pins = <
297 AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
298 AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
299 >;
300 };
301
302 uart0_pins: pinmux_uart0_pins {
303 pinctrl-single,pins = <
304 AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
305 AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
306 >;
307 };
308
309 clkout2_pin: pinmux_clkout2_pin {
310 pinctrl-single,pins = <
311 AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
312 >;
313 };
314
315 ecap2_pins: backlight_pins {
316 pinctrl-single,pins = <
317 AM33XX_IOPAD(0x99c, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */
318 >;
319 };
320
321 cpsw_default: cpsw_default {
322 pinctrl-single,pins = <
323 /* Slave 1 */
324 AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
325 AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
326 AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
327 AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
328 AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
329 AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
330 AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
331 AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
332 AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
333 AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
334 AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
335 AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
336
337 /* Slave 2 */
338 AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
339 AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
340 AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
341 AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
342 AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
343 AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
344 AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
345 AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
346 AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
347 AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
348 AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
349 AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
350 >;
351 };
352
353 cpsw_sleep: cpsw_sleep {
354 pinctrl-single,pins = <
355 /* Slave 1 reset value */
356 AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
357 AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
358 AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
359 AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
360 AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
361 AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
362 AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
363 AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
364 AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
365 AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
366 AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
367 AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
368
369 /* Slave 2 reset value*/
370 AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
371 AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
372 AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
373 AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
374 AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
375 AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
376 AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
377 AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
378 AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
379 AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
380 AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
381 AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
382 >;
383 };
384
385 davinci_mdio_default: davinci_mdio_default {
386 pinctrl-single,pins = <
387 /* MDIO */
388 AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
389 AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
390 >;
391 };
392
393 davinci_mdio_sleep: davinci_mdio_sleep {
394 pinctrl-single,pins = <
395 /* MDIO reset value */
396 AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
397 AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
398 >;
399 };
400
401 mmc1_pins: pinmux_mmc1_pins {
402 pinctrl-single,pins = <
403 AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
404 >;
405 };
406
407 mcasp1_pins: mcasp1_pins {
408 pinctrl-single,pins = <
409 AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
410 AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
411 AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
412 AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
413 >;
414 };
415
416 mcasp1_pins_sleep: mcasp1_pins_sleep {
417 pinctrl-single,pins = <
418 AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
419 AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
420 AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
421 AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
422 >;
423 };
424
425 mmc2_pins: pinmux_mmc2_pins {
426 pinctrl-single,pins = <
427 AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
428 AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
429 AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
430 AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
431 AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
432 AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
433 AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
434 >;
435 };
436
437 wl12xx_gpio: pinmux_wl12xx_gpio {
438 pinctrl-single,pins = <
439 AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
440 >;
441 };
442};
443
444&uart0 {
445 pinctrl-names = "default";
446 pinctrl-0 = <&uart0_pins>;
447
448 status = "okay";
449};
450
451&i2c0 {
452 pinctrl-names = "default";
453 pinctrl-0 = <&i2c0_pins>;
454
455 status = "okay";
456 clock-frequency = <400000>;
457
458 tps: tps@2d {
459 reg = <0x2d>;
460 };
461
462 lis331dlh: lis331dlh@18 {
463 compatible = "st,lis331dlh", "st,lis3lv02d";
464 reg = <0x18>;
465 Vdd-supply = <&lis3_reg>;
466 Vdd_IO-supply = <&lis3_reg>;
467
468 st,click-single-x;
469 st,click-single-y;
470 st,click-single-z;
471 st,click-thresh-x = <10>;
472 st,click-thresh-y = <10>;
473 st,click-thresh-z = <10>;
474 st,irq1-click;
475 st,irq2-click;
476 st,wakeup-x-lo;
477 st,wakeup-x-hi;
478 st,wakeup-y-lo;
479 st,wakeup-y-hi;
480 st,wakeup-z-lo;
481 st,wakeup-z-hi;
482 st,min-limit-x = <120>;
483 st,min-limit-y = <120>;
484 st,min-limit-z = <140>;
485 st,max-limit-x = <550>;
486 st,max-limit-y = <550>;
487 st,max-limit-z = <750>;
488 };
489
490 tlv320aic3106: tlv320aic3106@1b {
491 #sound-dai-cells = <0>;
492 compatible = "ti,tlv320aic3106";
493 reg = <0x1b>;
494 status = "okay";
495
496 /* Regulators */
497 AVDD-supply = <&vaux2_reg>;
498 IOVDD-supply = <&vaux2_reg>;
499 DRVDD-supply = <&vaux2_reg>;
500 DVDD-supply = <&vbat>;
501 };
502};
503
504&usb {
505 status = "okay";
506};
507
508&usb_ctrl_mod {
509 status = "okay";
510};
511
512&usb0_phy {
513 status = "okay";
514};
515
516&usb1_phy {
517 status = "okay";
518};
519
520&usb0 {
521 status = "okay";
522};
523
524&usb1 {
525 status = "okay";
526 dr_mode = "host";
527};
528
529&cppi41dma {
530 status = "okay";
531};
532
533&epwmss2 {
534 status = "okay";
535
536 ecap2: ecap@48304100 {
537 status = "okay";
538 pinctrl-names = "default";
539 pinctrl-0 = <&ecap2_pins>;
540 };
541};
542
543#include "tps65910.dtsi"
544
545&tps {
546 vcc1-supply = <&vbat>;
547 vcc2-supply = <&vbat>;
548 vcc3-supply = <&vbat>;
549 vcc4-supply = <&vbat>;
550 vcc5-supply = <&vbat>;
551 vcc6-supply = <&vbat>;
552 vcc7-supply = <&vbat>;
553 vccio-supply = <&vbat>;
554
555 regulators {
556 vrtc_reg: regulator@0 {
557 regulator-always-on;
558 };
559
560 vio_reg: regulator@1 {
561 regulator-always-on;
562 };
563
564 vdd1_reg: regulator@2 {
565 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
566 regulator-name = "vdd_mpu";
567 regulator-min-microvolt = <912500>;
568 regulator-max-microvolt = <1312500>;
569 regulator-boot-on;
570 regulator-always-on;
571 };
572
573 vdd2_reg: regulator@3 {
574 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
575 regulator-name = "vdd_core";
576 regulator-min-microvolt = <912500>;
577 regulator-max-microvolt = <1150000>;
578 regulator-boot-on;
579 regulator-always-on;
580 };
581
582 vdd3_reg: regulator@4 {
583 regulator-always-on;
584 };
585
586 vdig1_reg: regulator@5 {
587 regulator-always-on;
588 };
589
590 vdig2_reg: regulator@6 {
591 regulator-always-on;
592 };
593
594 vpll_reg: regulator@7 {
595 regulator-always-on;
596 };
597
598 vdac_reg: regulator@8 {
599 regulator-always-on;
600 };
601
602 vaux1_reg: regulator@9 {
603 regulator-always-on;
604 };
605
606 vaux2_reg: regulator@10 {
607 regulator-always-on;
608 };
609
610 vaux33_reg: regulator@11 {
611 regulator-always-on;
612 };
613
614 vmmc_reg: regulator@12 {
615 regulator-min-microvolt = <1800000>;
616 regulator-max-microvolt = <3300000>;
617 regulator-always-on;
618 };
619 };
620};
621
622&mac {
623 pinctrl-names = "default", "sleep";
624 pinctrl-0 = <&cpsw_default>;
625 pinctrl-1 = <&cpsw_sleep>;
626 dual_emac = <1>;
627 status = "okay";
628};
629
630&davinci_mdio {
631 pinctrl-names = "default", "sleep";
632 pinctrl-0 = <&davinci_mdio_default>;
633 pinctrl-1 = <&davinci_mdio_sleep>;
634 status = "okay";
635};
636
637&cpsw_emac0 {
638 phy_id = <&davinci_mdio>, <0>;
639 phy-mode = "rgmii-txid";
640 dual_emac_res_vlan = <1>;
641};
642
643&cpsw_emac1 {
644 phy_id = <&davinci_mdio>, <1>;
645 phy-mode = "rgmii-txid";
646 dual_emac_res_vlan = <2>;
647};
648
649&mmc1 {
650 status = "okay";
651 vmmc-supply = <&vmmc_reg>;
652 bus-width = <4>;
653 pinctrl-names = "default";
654 pinctrl-0 = <&mmc1_pins>;
655 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
656};
657
658&sham {
659 status = "okay";
660};
661
662&aes {
663 status = "okay";
664};
665
666&gpio0 {
667 ti,no-reset-on-init;
668};
669
670&mmc2 {
671 status = "okay";
672 vmmc-supply = <&wl12xx_vmmc>;
673 ti,non-removable;
674 bus-width = <4>;
675 cap-power-off-card;
676 pinctrl-names = "default";
677 pinctrl-0 = <&mmc2_pins>;
678
679 #address-cells = <1>;
680 #size-cells = <0>;
681 wlcore: wlcore@2 {
682 compatible = "ti,wl1271";
683 reg = <2>;
684 interrupt-parent = <&gpio0>;
685 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
686 ref-clock-frequency = <38400000>;
687 };
688};
689
690&mcasp1 {
691 #sound-dai-cells = <0>;
692 pinctrl-names = "default", "sleep";
693 pinctrl-0 = <&mcasp1_pins>;
694 pinctrl-1 = <&mcasp1_pins_sleep>;
695
696 status = "okay";
697
698 op-mode = <0>; /* MCASP_IIS_MODE */
699 tdm-slots = <2>;
700 /* 4 serializers */
701 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
702 0 0 1 2
703 >;
704 tx-num-evt = <32>;
705 rx-num-evt = <32>;
706};
707
708&tscadc {
709 status = "okay";
710 tsc {
711 ti,wires = <4>;
712 ti,x-plate-resistance = <200>;
713 ti,coordinate-readouts = <5>;
714 ti,wire-config = <0x00 0x11 0x22 0x33>;
715 };
716};
717
718&lcdc {
719 status = "okay";
720};