Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 07a8060a12771d3d10583a6295a0c89e0a2e83f0 / . / arch / arm / dts / stm32mp157c.dtsi
blob: 33c5981869b30281a025c2112d77365af2965843 [file] [log] [blame]
Patrick Delaunaya6743132018-07-09 15:17:19 +0200[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4 * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5 */
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/stm32mp1-clks.h>
8#include <dt-bindings/reset/stm32mp1-resets.h>
9
10/ {
11 #address-cells = <1>;
12 #size-cells = <1>;
13
14 cpus {
15 #address-cells = <1>;
16 #size-cells = <0>;
17
18 cpu0: cpu@0 {
19 compatible = "arm,cortex-a7";
20 device_type = "cpu";
21 reg = <0>;
22 };
23
24 cpu1: cpu@1 {
25 compatible = "arm,cortex-a7";
26 device_type = "cpu";
27 reg = <1>;
28 };
29 };
30
31 psci {
32 compatible = "arm,psci";
33 method = "smc";
34 cpu_off = <0x84000002>;
35 cpu_on = <0x84000003>;
36 };
37
38 aliases {
39 gpio0 = &gpioa;
40 gpio1 = &gpiob;
41 gpio2 = &gpioc;
42 gpio3 = &gpiod;
43 gpio4 = &gpioe;
44 gpio5 = &gpiof;
45 gpio6 = &gpiog;
46 gpio7 = &gpioh;
47 gpio8 = &gpioi;
48 gpio9 = &gpioj;
49 gpio10 = &gpiok;
50 serial0 = &usart1;
51 serial1 = &usart2;
52 serial2 = &usart3;
53 serial3 = &uart4;
54 serial4 = &uart5;
55 serial5 = &usart6;
56 serial6 = &uart7;
57 serial7 = &uart8;
58 };
59
60 intc: interrupt-controller@a0021000 {
61 compatible = "arm,cortex-a7-gic";
62 #interrupt-cells = <3>;
63 interrupt-controller;
64 reg = <0xa0021000 0x1000>,
65 <0xa0022000 0x2000>;
66 };
67
68 timer {
69 compatible = "arm,armv7-timer";
70 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
71 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
72 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
73 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
74 interrupt-parent = <&intc>;
75 };
76
77 clocks {
78 clk_hse: clk-hse {
79 #clock-cells = <0>;
80 compatible = "fixed-clock";
81 clock-frequency = <24000000>;
82 };
83
84 clk_hsi: clk-hsi {
85 #clock-cells = <0>;
86 compatible = "fixed-clock";
87 clock-frequency = <64000000>;
88 };
89
90 clk_lse: clk-lse {
91 #clock-cells = <0>;
92 compatible = "fixed-clock";
93 clock-frequency = <32768>;
94 };
95
96 clk_lsi: clk-lsi {
97 #clock-cells = <0>;
98 compatible = "fixed-clock";
99 clock-frequency = <32000>;
100 };
101
102 clk_csi: clk-csi {
103 #clock-cells = <0>;
104 compatible = "fixed-clock";
105 clock-frequency = <4000000>;
106 };
107 };
108
Patrice Chotard8e9c94d2018-08-10 17:12:11 +0200[diff] [blame]109 pm_domain {
110 #address-cells = <1>;
111 #size-cells = <0>;
112 compatible = "st,stm32mp157c-pd";
113
114 pd_core_ret: core-ret-power-domain@1 {
115 #address-cells = <1>;
116 #size-cells = <0>;
117 reg = <1>;
118 #power-domain-cells = <0>;
119 label = "CORE-RETENTION";
120
121 pd_core: core-power-domain@2 {
122 reg = <2>;
123 #power-domain-cells = <0>;
124 label = "CORE";
125 };
126 };
127 };
128
Patrick Delaunaya6743132018-07-09 15:17:19 +0200[diff] [blame]129 soc {
130 compatible = "simple-bus";
131 #address-cells = <1>;
132 #size-cells = <1>;
133 interrupt-parent = <&intc>;
134 ranges;
135
136 timers2: timer@40000000 {
137 #address-cells = <1>;
138 #size-cells = <0>;
139 compatible = "st,stm32-timers";
140 reg = <0x40000000 0x400>;
141 clocks = <&rcc TIM2_K>;
142 clock-names = "int";
143 status = "disabled";
144
145 pwm {
146 compatible = "st,stm32-pwm";
147 status = "disabled";
148 };
149
150 timer@1 {
151 compatible = "st,stm32h7-timer-trigger";
152 reg = <1>;
153 status = "disabled";
154 };
155 };
156
157 timers3: timer@40001000 {
158 #address-cells = <1>;
159 #size-cells = <0>;
160 compatible = "st,stm32-timers";
161 reg = <0x40001000 0x400>;
162 clocks = <&rcc TIM3_K>;
163 clock-names = "int";
164 status = "disabled";
165
166 pwm {
167 compatible = "st,stm32-pwm";
168 status = "disabled";
169 };
170
171 timer@2 {
172 compatible = "st,stm32h7-timer-trigger";
173 reg = <2>;
174 status = "disabled";
175 };
176 };
177
178 timers4: timer@40002000 {
179 #address-cells = <1>;
180 #size-cells = <0>;
181 compatible = "st,stm32-timers";
182 reg = <0x40002000 0x400>;
183 clocks = <&rcc TIM4_K>;
184 clock-names = "int";
185 status = "disabled";
186
187 pwm {
188 compatible = "st,stm32-pwm";
189 status = "disabled";
190 };
191
192 timer@3 {
193 compatible = "st,stm32h7-timer-trigger";
194 reg = <3>;
195 status = "disabled";
196 };
197 };
198
199 timers5: timer@40003000 {
200 #address-cells = <1>;
201 #size-cells = <0>;
202 compatible = "st,stm32-timers";
203 reg = <0x40003000 0x400>;
204 clocks = <&rcc TIM5_K>;
205 clock-names = "int";
206 status = "disabled";
207
208 pwm {
209 compatible = "st,stm32-pwm";
210 status = "disabled";
211 };
212
213 timer@4 {
214 compatible = "st,stm32h7-timer-trigger";
215 reg = <4>;
216 status = "disabled";
217 };
218 };
219
220 timers6: timer@40004000 {
221 #address-cells = <1>;
222 #size-cells = <0>;
223 compatible = "st,stm32-timers";
224 reg = <0x40004000 0x400>;
225 clocks = <&rcc TIM6_K>;
226 clock-names = "int";
227 status = "disabled";
228
229 timer@5 {
230 compatible = "st,stm32h7-timer-trigger";
231 reg = <5>;
232 status = "disabled";
233 };
234 };
235
236 timers7: timer@40005000 {
237 #address-cells = <1>;
238 #size-cells = <0>;
239 compatible = "st,stm32-timers";
240 reg = <0x40005000 0x400>;
241 clocks = <&rcc TIM7_K>;
242 clock-names = "int";
243 status = "disabled";
244
245 timer@6 {
246 compatible = "st,stm32h7-timer-trigger";
247 reg = <6>;
248 status = "disabled";
249 };
250 };
251
252 timers12: timer@40006000 {
253 #address-cells = <1>;
254 #size-cells = <0>;
255 compatible = "st,stm32-timers";
256 reg = <0x40006000 0x400>;
257 clocks = <&rcc TIM12_K>;
258 clock-names = "int";
259 status = "disabled";
260
261 pwm {
262 compatible = "st,stm32-pwm";
263 status = "disabled";
264 };
265
266 timer@11 {
267 compatible = "st,stm32h7-timer-trigger";
268 reg = <11>;
269 status = "disabled";
270 };
271 };
272
273 timers13: timer@40007000 {
274 #address-cells = <1>;
275 #size-cells = <0>;
276 compatible = "st,stm32-timers";
277 reg = <0x40007000 0x400>;
278 clocks = <&rcc TIM13_K>;
279 clock-names = "int";
280 status = "disabled";
281
282 pwm {
283 compatible = "st,stm32-pwm";
284 status = "disabled";
285 };
286
287 timer@12 {
288 compatible = "st,stm32h7-timer-trigger";
289 reg = <12>;
290 status = "disabled";
291 };
292 };
293
294 timers14: timer@40008000 {
295 #address-cells = <1>;
296 #size-cells = <0>;
297 compatible = "st,stm32-timers";
298 reg = <0x40008000 0x400>;
299 clocks = <&rcc TIM14_K>;
300 clock-names = "int";
301 status = "disabled";
302
303 pwm {
304 compatible = "st,stm32-pwm";
305 status = "disabled";
306 };
307
308 timer@13 {
309 compatible = "st,stm32h7-timer-trigger";
310 reg = <13>;
311 status = "disabled";
312 };
313 };
314
315 lptimer1: timer@40009000 {
316 #address-cells = <1>;
317 #size-cells = <0>;
318 compatible = "st,stm32-lptimer";
319 reg = <0x40009000 0x400>;
320 clocks = <&rcc LPTIM1_K>;
321 clock-names = "mux";
322 status = "disabled";
323
324 pwm {
325 compatible = "st,stm32-pwm-lp";
326 #pwm-cells = <3>;
327 status = "disabled";
328 };
329
330 trigger@0 {
331 compatible = "st,stm32-lptimer-trigger";
332 reg = <0>;
333 status = "disabled";
334 };
335
336 counter {
337 compatible = "st,stm32-lptimer-counter";
338 status = "disabled";
339 };
340 };
341
342 usart2: serial@4000e000 {
343 compatible = "st,stm32h7-uart";
344 reg = <0x4000e000 0x400>;
345 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
346 clocks = <&rcc USART2_K>;
347 status = "disabled";
348 };
349
350 usart3: serial@4000f000 {
351 compatible = "st,stm32h7-uart";
352 reg = <0x4000f000 0x400>;
353 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
354 clocks = <&rcc USART3_K>;
355 status = "disabled";
356 };
357
358 uart4: serial@40010000 {
359 compatible = "st,stm32h7-uart";
360 reg = <0x40010000 0x400>;
361 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
362 clocks = <&rcc UART4_K>;
363 status = "disabled";
364 };
365
366 uart5: serial@40011000 {
367 compatible = "st,stm32h7-uart";
368 reg = <0x40011000 0x400>;
369 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
370 clocks = <&rcc UART5_K>;
371 status = "disabled";
372 };
373
374 i2c1: i2c@40012000 {
375 compatible = "st,stm32f7-i2c";
376 reg = <0x40012000 0x400>;
377 interrupt-names = "event", "error";
378 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
379 <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
380 clocks = <&rcc I2C1_K>;
381 resets = <&rcc I2C1_R>;
382 #address-cells = <1>;
383 #size-cells = <0>;
384 status = "disabled";
385 };
386
387 i2c2: i2c@40013000 {
388 compatible = "st,stm32f7-i2c";
389 reg = <0x40013000 0x400>;
390 interrupt-names = "event", "error";
391 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
392 <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
393 clocks = <&rcc I2C2_K>;
394 resets = <&rcc I2C2_R>;
395 #address-cells = <1>;
396 #size-cells = <0>;
397 status = "disabled";
398 };
399
400 i2c3: i2c@40014000 {
401 compatible = "st,stm32f7-i2c";
402 reg = <0x40014000 0x400>;
403 interrupt-names = "event", "error";
404 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
405 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
406 clocks = <&rcc I2C3_K>;
407 resets = <&rcc I2C3_R>;
408 #address-cells = <1>;
409 #size-cells = <0>;
410 status = "disabled";
411 };
412
413 i2c5: i2c@40015000 {
414 compatible = "st,stm32f7-i2c";
415 reg = <0x40015000 0x400>;
416 interrupt-names = "event", "error";
417 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
418 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
419 clocks = <&rcc I2C5_K>;
420 resets = <&rcc I2C5_R>;
421 #address-cells = <1>;
422 #size-cells = <0>;
423 status = "disabled";
424 };
425
426 cec: cec@40016000 {
427 compatible = "st,stm32-cec";
428 reg = <0x40016000 0x400>;
429 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
430 clocks = <&rcc CEC_K>, <&clk_lse>;
431 clock-names = "cec", "hdmi-cec";
432 status = "disabled";
433 };
434
435 dac: dac@40017000 {
436 compatible = "st,stm32h7-dac-core";
437 reg = <0x40017000 0x400>;
438 clocks = <&rcc DAC12>;
439 clock-names = "pclk";
440 #address-cells = <1>;
441 #size-cells = <0>;
442 status = "disabled";
443
444 dac1: dac@1 {
445 compatible = "st,stm32-dac";
446 #io-channels-cells = <1>;
447 reg = <1>;
448 status = "disabled";
449 };
450
451 dac2: dac@2 {
452 compatible = "st,stm32-dac";
453 #io-channels-cells = <1>;
454 reg = <2>;
455 status = "disabled";
456 };
457 };
458
459 uart7: serial@40018000 {
460 compatible = "st,stm32h7-uart";
461 reg = <0x40018000 0x400>;
462 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
463 clocks = <&rcc UART7_K>;
464 status = "disabled";
465 };
466
467 uart8: serial@40019000 {
468 compatible = "st,stm32h7-uart";
469 reg = <0x40019000 0x400>;
470 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
471 clocks = <&rcc UART8_K>;
472 status = "disabled";
473 };
474
475 timers1: timer@44000000 {
476 #address-cells = <1>;
477 #size-cells = <0>;
478 compatible = "st,stm32-timers";
479 reg = <0x44000000 0x400>;
480 clocks = <&rcc TIM1_K>;
481 clock-names = "int";
482 status = "disabled";
483
484 pwm {
485 compatible = "st,stm32-pwm";
486 status = "disabled";
487 };
488
489 timer@0 {
490 compatible = "st,stm32h7-timer-trigger";
491 reg = <0>;
492 status = "disabled";
493 };
494 };
495
496 timers8: timer@44001000 {
497 #address-cells = <1>;
498 #size-cells = <0>;
499 compatible = "st,stm32-timers";
500 reg = <0x44001000 0x400>;
501 clocks = <&rcc TIM8_K>;
502 clock-names = "int";
503 status = "disabled";
504
505 pwm {
506 compatible = "st,stm32-pwm";
507 status = "disabled";
508 };
509
510 timer@7 {
511 compatible = "st,stm32h7-timer-trigger";
512 reg = <7>;
513 status = "disabled";
514 };
515 };
516
517 usart6: serial@44003000 {
518 compatible = "st,stm32h7-uart";
519 reg = <0x44003000 0x400>;
520 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
521 clocks = <&rcc USART6_K>;
522 status = "disabled";
523 };
524
525 timers15: timer@44006000 {
526 #address-cells = <1>;
527 #size-cells = <0>;
528 compatible = "st,stm32-timers";
529 reg = <0x44006000 0x400>;
530 clocks = <&rcc TIM15_K>;
531 clock-names = "int";
532 status = "disabled";
533
534 pwm {
535 compatible = "st,stm32-pwm";
536 status = "disabled";
537 };
538
539 timer@14 {
540 compatible = "st,stm32h7-timer-trigger";
541 reg = <14>;
542 status = "disabled";
543 };
544 };
545
546 timers16: timer@44007000 {
547 #address-cells = <1>;
548 #size-cells = <0>;
549 compatible = "st,stm32-timers";
550 reg = <0x44007000 0x400>;
551 clocks = <&rcc TIM16_K>;
552 clock-names = "int";
553 status = "disabled";
554
555 pwm {
556 compatible = "st,stm32-pwm";
557 status = "disabled";
558 };
559 timer@15 {
560 compatible = "st,stm32h7-timer-trigger";
561 reg = <15>;
562 status = "disabled";
563 };
564 };
565
566 timers17: timer@44008000 {
567 #address-cells = <1>;
568 #size-cells = <0>;
569 compatible = "st,stm32-timers";
570 reg = <0x44008000 0x400>;
571 clocks = <&rcc TIM17_K>;
572 clock-names = "int";
573 status = "disabled";
574
575 pwm {
576 compatible = "st,stm32-pwm";
577 status = "disabled";
578 };
579
580 timer@16 {
581 compatible = "st,stm32h7-timer-trigger";
582 reg = <16>;
583 status = "disabled";
584 };
585 };
586
587 dma1: dma@48000000 {
588 compatible = "st,stm32-dma";
589 reg = <0x48000000 0x400>;
590 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
591 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
592 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
593 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
594 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
595 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
596 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
597 <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
598 clocks = <&rcc DMA1>;
599 #dma-cells = <4>;
600 st,mem2mem;
601 dma-requests = <8>;
602 };
603
604 dma2: dma@48001000 {
605 compatible = "st,stm32-dma";
606 reg = <0x48001000 0x400>;
607 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
608 <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
609 <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
610 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
611 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
612 <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
613 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
614 <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
615 clocks = <&rcc DMA2>;
616 #dma-cells = <4>;
617 st,mem2mem;
618 dma-requests = <8>;
619 };
620
621 dmamux1: dma-router@48002000 {
622 compatible = "st,stm32h7-dmamux";
623 reg = <0x48002000 0x1c>;
624 #dma-cells = <3>;
625 dma-requests = <128>;
626 dma-masters = <&dma1 &dma2>;
627 dma-channels = <16>;
628 clocks = <&rcc DMAMUX>;
629 };
630
Patrice Chotard638ee5a2018-08-06 09:54:04 +0200[diff] [blame]631 adc: adc@48003000 {
632 compatible = "st,stm32mp1-adc-core";
633 reg = <0x48003000 0x400>;
634 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
635 <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
636 clocks = <&rcc ADC12>, <&rcc ADC12_K>;
637 clock-names = "bus", "adc";
638 interrupt-controller;
639 #interrupt-cells = <1>;
640 #address-cells = <1>;
641 #size-cells = <0>;
642 status = "disabled";
643
644 adc1: adc@0 {
645 compatible = "st,stm32mp1-adc";
646 #io-channel-cells = <1>;
647 reg = <0x0>;
648 interrupt-parent = <&adc>;
649 interrupts = <0>;
650 status = "disabled";
651 };
652
653 adc2: adc@100 {
654 compatible = "st,stm32mp1-adc";
655 #io-channel-cells = <1>;
656 reg = <0x100>;
657 interrupt-parent = <&adc>;
658 interrupts = <1>;
659 status = "disabled";
660 };
661 };
662
Patrick Delaunaya6743132018-07-09 15:17:19 +0200[diff] [blame]663 sdmmc3: sdmmc@48004000 {
664 compatible = "st,stm32-sdmmc2";
665 reg = <0x48004000 0x400>, <0x48005000 0x400>;
666 reg-names = "sdmmc", "delay";
667 interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>;
668 clocks = <&rcc SDMMC3_K>;
669 resets = <&rcc SDMMC3_R>;
670 st,idma = <1>;
671 cap-sd-highspeed;
672 cap-mmc-highspeed;
673 max-frequency = <120000000>;
674 status = "disabled";
675 };
676
Patrice Chotard8e9c94d2018-08-10 17:12:11 +0200[diff] [blame]677 usbotg_hs: usb-otg@49000000 {
678 compatible = "st,stm32mp1-hsotg", "snps,dwc2";
679 reg = <0x49000000 0x10000>;
680 clocks = <&rcc USBO_K>;
681 clock-names = "otg";
682 resets = <&rcc USBO_R>;
683 reset-names = "dwc2";
684 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
685 g-rx-fifo-size = <256>;
686 g-np-tx-fifo-size = <32>;
687 g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
688 dr_mode = "otg";
689 power-domains = <&pd_core>;
690 status = "disabled";
691 };
692
Patrick Delaunaya6743132018-07-09 15:17:19 +0200[diff] [blame]693 rcc: rcc@50000000 {
694 compatible = "st,stm32mp1-rcc", "syscon";
695 reg = <0x50000000 0x1000>;
696 #clock-cells = <1>;
697 #reset-cells = <1>;
698 };
699
700 rcc_reboot: rcc-reboot@50000000 {
701 compatible = "syscon-reboot";
702 regmap = <&rcc>;
703 offset = <0x404>;
704 mask = <0x1>;
705 };
706
707 pwr: pwr@50001000 {
708 compatible = "st,stm32mp1-pwr", "st,stm32-pwr", "syscon", "simple-mfd";
709 reg = <0x50001000 0x400>;
710 system-power-controller;
711 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
712 st,sysrcc = <&rcc>;
713 clocks = <&rcc PLL2_R>;
714 clock-names = "phyclk";
715
716 pwr-regulators@c {
717 compatible = "st,stm32mp1,pwr-reg";
718 st,tzcr = <&rcc 0x0 0x1>;
719
720 reg11: reg11 {
721 regulator-name = "reg11";
722 regulator-min-microvolt = <1100000>;
723 regulator-max-microvolt = <1100000>;
724 };
725
726 reg18: reg18 {
727 regulator-name = "reg18";
728 regulator-min-microvolt = <1800000>;
729 regulator-max-microvolt = <1800000>;
730 };
731
732 usb33: usb33 {
733 regulator-name = "usb33";
734 regulator-min-microvolt = <3300000>;
735 regulator-max-microvolt = <3300000>;
736 };
737 };
738 };
739
740 exti: interrupt-controller@5000d000 {
741 compatible = "st,stm32mp1-exti", "syscon";
742 interrupt-controller;
743 #interrupt-cells = <2>;
744 reg = <0x5000d000 0x400>;
745 };
746
747 syscfg: system-config@50020000 {
748 compatible = "st,stm32-syscfg", "syscon";
749 reg = <0x50020000 0x400>;
750 };
751
752 lptimer2: timer@50021000 {
753 #address-cells = <1>;
754 #size-cells = <0>;
755 compatible = "st,stm32-lptimer";
756 reg = <0x50021000 0x400>;
757 clocks = <&rcc LPTIM2_K>;
758 clock-names = "mux";
759 status = "disabled";
760
761 pwm {
762 compatible = "st,stm32-pwm-lp";
763 #pwm-cells = <3>;
764 status = "disabled";
765 };
766
767 trigger@1 {
768 compatible = "st,stm32-lptimer-trigger";
769 reg = <1>;
770 status = "disabled";
771 };
772
773 counter {
774 compatible = "st,stm32-lptimer-counter";
775 status = "disabled";
776 };
777 };
778
779 lptimer3: timer@50022000 {
780 #address-cells = <1>;
781 #size-cells = <0>;
782 compatible = "st,stm32-lptimer";
783 reg = <0x50022000 0x400>;
784 clocks = <&rcc LPTIM3_K>;
785 clock-names = "mux";
786 status = "disabled";
787
788 pwm {
789 compatible = "st,stm32-pwm-lp";
790 #pwm-cells = <3>;
791 status = "disabled";
792 };
793
794 trigger@2 {
795 compatible = "st,stm32-lptimer-trigger";
796 reg = <2>;
797 status = "disabled";
798 };
799 };
800
801 lptimer4: timer@50023000 {
802 compatible = "st,stm32-lptimer";
803 reg = <0x50023000 0x400>;
804 clocks = <&rcc LPTIM4_K>;
805 clock-names = "mux";
806 status = "disabled";
807
808 pwm {
809 compatible = "st,stm32-pwm-lp";
810 #pwm-cells = <3>;
811 status = "disabled";
812 };
813 };
814
815 lptimer5: timer@50024000 {
816 compatible = "st,stm32-lptimer";
817 reg = <0x50024000 0x400>;
818 clocks = <&rcc LPTIM5_K>;
819 clock-names = "mux";
820 status = "disabled";
821
822 pwm {
823 compatible = "st,stm32-pwm-lp";
824 #pwm-cells = <3>;
825 status = "disabled";
826 };
827 };
828
829 vrefbuf: vrefbuf@50025000 {
830 compatible = "st,stm32-vrefbuf";
831 reg = <0x50025000 0x8>;
832 regulator-min-microvolt = <1500000>;
833 regulator-max-microvolt = <2500000>;
834 clocks = <&rcc VREF>;
835 status = "disabled";
836 };
837
838 cryp1: cryp@54001000 {
839 compatible = "st,stm32mp1-cryp";
840 reg = <0x54001000 0x400>;
841 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
842 clocks = <&rcc CRYP1>;
843 resets = <&rcc CRYP1_R>;
844 status = "disabled";
845 };
846
847 rng1: rng@54003000 {
848 compatible = "st,stm32-rng";
849 reg = <0x54003000 0x400>;
850 clocks = <&rcc RNG1_K>;
851 resets = <&rcc RNG1_R>;
852 status = "disabled";
853 };
854
855 mdma1: dma@58000000 {
856 compatible = "st,stm32h7-mdma";
857 reg = <0x58000000 0x1000>;
858 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
859 clocks = <&rcc MDMA>;
860 #dma-cells = <5>;
861 dma-channels = <32>;
862 dma-requests = <48>;
863 };
864
865 qspi: qspi@58003000 {
866 compatible = "st,stm32f469-qspi";
867 reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
868 reg-names = "qspi", "qspi_mm";
869 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
870 clocks = <&rcc QSPI_K>;
871 resets = <&rcc QSPI_R>;
872 status = "disabled";
873 };
874
875 sdmmc1: sdmmc@58005000 {
876 compatible = "st,stm32-sdmmc2";
877 reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
878 reg-names = "sdmmc", "delay";
879 clocks = <&rcc SDMMC1_K>;
880 resets = <&rcc SDMMC1_R>;
881 st,idma = <1>;
882 cap-sd-highspeed;
883 cap-mmc-highspeed;
884 max-frequency = <120000000>;
885 status = "disabled";
886 };
887
888 sdmmc2: sdmmc@58007000 {
889 compatible = "st,stm32-sdmmc2";
890 reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
891 reg-names = "sdmmc", "delay";
892 interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
893 clocks = <&rcc SDMMC2_K>;
894 resets = <&rcc SDMMC2_R>;
895 st,idma = <1>;
896 cap-sd-highspeed;
897 cap-mmc-highspeed;
898 max-frequency = <120000000>;
899 status = "disabled";
900 };
901
902 crc1: crc@58009000 {
903 compatible = "st,stm32f7-crc";
904 reg = <0x58009000 0x400>;
905 clocks = <&rcc CRC1>;
906 status = "disabled";
907 };
908
909 usbh_ohci: usbh-ohci@5800c000 {
910 compatible = "generic-ohci";
911 reg = <0x5800c000 0x1000>;
912 clocks = <&rcc USBH>;
913 resets = <&rcc USBH_R>;
914 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
915 status = "disabled";
916 };
917
918 usbh_ehci: usbh-ehci@5800d000 {
919 compatible = "generic-ehci";
920 reg = <0x5800d000 0x1000>;
921 clocks = <&rcc USBH>;
922 resets = <&rcc USBH_R>;
923 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
924 companion = <&usbh_ohci>;
925 status = "disabled";
926 };
927
928 dsi: dsi@5a000000 {
929 compatible = "st,stm32-dsi";
930 reg = <0x5a000000 0x800>;
931 clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
932 clock-names = "pclk", "ref", "px_clk";
933 resets = <&rcc DSI_R>;
934 reset-names = "apb";
935 status = "disabled";
936 };
937
938 ltdc: display-controller@5a001000 {
939 compatible = "st,stm32-ltdc";
940 reg = <0x5a001000 0x400>;
941 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
942 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
943 clocks = <&rcc LTDC_PX>;
944 clock-names = "lcd";
945 resets = <&rcc LTDC_R>;
946 status = "disabled";
947 };
948
949 usbphyc: usbphyc@5a006000 {
950 #address-cells = <1>;
951 #size-cells = <0>;
952 compatible = "st,stm32mp1-usbphyc";
953 reg = <0x5a006000 0x1000>;
954 clocks = <&rcc USBPHY_K>;
955 resets = <&rcc USBPHY_R>;
956 status = "disabled";
957
958 usbphyc_port0: usb-phy@0 {
959 #phy-cells = <0>;
960 reg = <0>;
961 };
962
963 usbphyc_port1: usb-phy@1 {
964 #phy-cells = <1>;
965 reg = <1>;
966 };
967 };
968
969 usart1: serial@5c000000 {
970 compatible = "st,stm32h7-uart";
971 reg = <0x5c000000 0x400>;
972 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
973 clocks = <&rcc USART1_K>;
974 status = "disabled";
975 };
976
977 i2c4: i2c@5c002000 {
978 compatible = "st,stm32f7-i2c";
979 reg = <0x5c002000 0x400>;
980 interrupt-names = "event", "error";
981 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
982 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
983 clocks = <&rcc I2C4_K>;
984 resets = <&rcc I2C4_R>;
985 #address-cells = <1>;
986 #size-cells = <0>;
987 status = "disabled";
988 };
989
990 i2c6: i2c@5c009000 {
991 compatible = "st,stm32f7-i2c";
992 reg = <0x5c009000 0x400>;
993 interrupt-names = "event", "error";
994 interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
995 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
996 clocks = <&rcc I2C6_K>;
997 resets = <&rcc I2C6_R>;
998 #address-cells = <1>;
999 #size-cells = <0>;
1000 status = "disabled";
1001 };
1002 };
1003};