blob: 11260fe5f68ded64f248094fd69f4204ecf3d61c [file] [log] [blame]
Stefanbfacf462011-12-23 06:35:04 +00001/*
2 * Copyright (C) 2011
3 * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
4 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
10 * See file CREDITS for list of people who contributed to this
11 * project.
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
26 * MA 02110-1301 USA
27 */
28
29#include <common.h>
30#include <miiphy.h>
31#include <netdev.h>
32#include <asm/arch/cpu.h>
33#include <asm/arch/kirkwood.h>
34#include <asm/arch/mpp.h>
35#include <asm/arch/gpio.h>
36#include "dns325.h"
37
38DECLARE_GLOBAL_DATA_PTR;
39
40int board_early_init_f(void)
41{
42 /* Gpio configuration */
43 kw_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
44 DNS325_OE_LOW, DNS325_OE_HIGH);
45
46 /* Multi-Purpose Pins Functionality configuration */
47 u32 kwmpp_config[] = {
48 MPP0_NF_IO2,
49 MPP1_NF_IO3,
50 MPP2_NF_IO4,
51 MPP3_NF_IO5,
52 MPP4_NF_IO6,
53 MPP5_NF_IO7,
54 MPP6_SYSRST_OUTn,
55 MPP7_GPO,
56 MPP8_TW_SDA,
57 MPP9_TW_SCK,
58 MPP10_UART0_TXD,
59 MPP11_UART0_RXD,
60 MPP12_SD_CLK,
61 MPP13_SD_CMD,
62 MPP14_SD_D0,
63 MPP15_SD_D1,
64 MPP16_SD_D2,
65 MPP17_SD_D3,
66 MPP18_NF_IO0,
67 MPP19_NF_IO1,
68 MPP20_SATA1_ACTn, /* sata1(left) status led */
69 MPP21_SATA0_ACTn, /* sata0(right) status led */
70 MPP22_GPIO,
71 MPP23_GPIO,
72 MPP24_GPIO, /* power off out */
73 MPP25_GPIO,
74 MPP26_GPIO, /* power led */
75 MPP27_GPIO, /* sata0(right) error led */
76 MPP28_GPIO, /* sata1(left) error led */
77 MPP29_GPIO, /* usb error led */
78 MPP30_GPIO,
79 MPP31_GPIO,
80 MPP32_GPIO,
81 MPP33_GPIO,
82 MPP34_GPIO, /* power key */
83 MPP35_GPIO,
84 MPP36_GPIO,
85 MPP37_GPIO,
86 MPP38_GPIO,
87 MPP39_GPIO, /* enable sata 0 */
88 MPP40_GPIO, /* enable sata 1 */
89 MPP41_GPIO, /* hdd0 present */
90 MPP42_GPIO, /* hdd1 present */
91 MPP43_GPIO, /* usb status led */
92 MPP44_GPIO, /* fan status */
93 MPP45_GPIO, /* fan high speed */
94 MPP46_GPIO, /* fan low speed */
95 MPP47_GPIO, /* usb umount */
96 MPP48_GPIO, /* factory reset */
97 MPP49_GPIO, /* thermal sensor */
98 0
99 };
Valentin Longchamp84683632012-06-01 01:31:00 +0000100 kirkwood_mpp_conf(kwmpp_config, NULL);
Stefanbfacf462011-12-23 06:35:04 +0000101
102 kw_gpio_set_blink(DNS325_GPIO_LED_POWER , 1);
103
104 kw_gpio_set_value(DNS325_GPIO_SATA0_EN , 1);
105 return 0;
106}
107
108int board_init(void)
109{
110 /* Boot parameters address */
111 gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
112
113 return 0;
114}
115
116#ifdef CONFIG_RESET_PHY_R
117/* Configure and initialize PHY */
118void reset_phy(void)
119{
120 u16 reg;
121 u16 devadr;
122 char *name = "egiga0";
123
124 if (miiphy_set_current_dev(name))
125 return;
126
127 /* command to read PHY dev address */
128 if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
129 printf("Err..(%s) could not read PHY dev address\n", __func__);
130 return;
131 }
132
133 /*
134 * Enable RGMII delay on Tx and Rx for CPU port
135 * Ref: sec 4.7.2 of chip datasheet
136 */
137 miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
138 miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
139 reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
140 miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
141 miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
142
143 /* reset the phy */
144 miiphy_reset(name, devadr);
145
146 debug("88E1116 Initialized on %s\n", name);
147}
148#endif /* CONFIG_RESET_PHY_R */