blob: e4daa991e9529fecef7ff7ba523829d7b55f74f6 [file] [log] [blame]
Mugunthan V Ne5520e12015-09-22 18:45:12 +05301/*
2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra74x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12
13/ {
14 model = "TI DRA742";
15 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
16
Mugunthan V N0935df62015-11-26 17:25:41 +053017 chosen {
18 stdout-path = &uart1;
19 };
20
Mugunthan V Ne5520e12015-09-22 18:45:12 +053021 memory {
22 device_type = "memory";
23 reg = <0x80000000 0x60000000>; /* 1536 MB */
24 };
25
26 mmc2_3v3: fixedregulator-mmc2 {
27 compatible = "regulator-fixed";
28 regulator-name = "mmc2_3v3";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
31 };
32
33 extcon_usb1: extcon_usb1 {
34 compatible = "linux,extcon-usb-gpio";
35 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
36 };
37
38 extcon_usb2: extcon_usb2 {
39 compatible = "linux,extcon-usb-gpio";
40 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
41 };
42
43 vtt_fixed: fixedregulator-vtt {
44 compatible = "regulator-fixed";
45 regulator-name = "vtt_fixed";
46 regulator-min-microvolt = <1350000>;
47 regulator-max-microvolt = <1350000>;
48 regulator-always-on;
49 regulator-boot-on;
50 enable-active-high;
51 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
52 };
53};
54
55&dra7_pmx_core {
56 pinctrl-names = "default";
57 pinctrl-0 = <&vtt_pin>;
58
59 vtt_pin: pinmux_vtt_pin {
60 pinctrl-single,pins = <
61 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
62 >;
63 };
64
65 i2c1_pins: pinmux_i2c1_pins {
66 pinctrl-single,pins = <
67 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
68 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
69 >;
70 };
71
72 i2c2_pins: pinmux_i2c2_pins {
73 pinctrl-single,pins = <
74 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
75 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
76 >;
77 };
78
79 i2c3_pins: pinmux_i2c3_pins {
80 pinctrl-single,pins = <
81 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
82 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
83 >;
84 };
85
86 mcspi1_pins: pinmux_mcspi1_pins {
87 pinctrl-single,pins = <
88 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
89 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
90 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
91 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
92 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
93 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
94 >;
95 };
96
97 mcspi2_pins: pinmux_mcspi2_pins {
98 pinctrl-single,pins = <
99 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
100 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
101 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
102 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
103 >;
104 };
105
106 uart1_pins: pinmux_uart1_pins {
107 pinctrl-single,pins = <
108 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
109 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
110 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
111 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
112 >;
113 };
114
115 uart2_pins: pinmux_uart2_pins {
116 pinctrl-single,pins = <
117 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
118 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
119 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
120 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
121 >;
122 };
123
124 uart3_pins: pinmux_uart3_pins {
125 pinctrl-single,pins = <
126 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
127 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
128 >;
129 };
130
131 qspi1_pins: pinmux_qspi1_pins {
132 pinctrl-single,pins = <
133 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
134 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
135 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
136 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
137 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
138 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
139 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
140 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
141 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
142 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
143 >;
144 };
145
146 usb1_pins: pinmux_usb1_pins {
147 pinctrl-single,pins = <
148 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
149 >;
150 };
151
152 usb2_pins: pinmux_usb2_pins {
153 pinctrl-single,pins = <
154 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
155 >;
156 };
157
158 nand_flash_x16: nand_flash_x16 {
159 /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
160 * So NAND flash requires following switch settings:
161 * SW5.9 (GPMC_WPN) = LOW
162 * SW5.1 (NAND_BOOTn) = HIGH */
163 pinctrl-single,pins = <
164 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
165 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
166 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
167 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
168 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
169 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
170 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
171 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
172 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
173 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
174 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
175 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
176 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
177 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
178 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
179 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
180 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
181 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
182 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
183 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
184 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
185 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
186 >;
187 };
188
189 cpsw_default: cpsw_default {
190 pinctrl-single,pins = <
191 /* Slave 1 */
192 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
193 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
194 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
195 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
196 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
197 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
198 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
199 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
200 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
201 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
202 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
203 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
204
205 /* Slave 2 */
206 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
207 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
208 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
209 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
210 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
211 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
212 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
213 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
214 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
215 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
216 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
217 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
218 >;
219
220 };
221
222 cpsw_sleep: cpsw_sleep {
223 pinctrl-single,pins = <
224 /* Slave 1 */
225 0x250 (MUX_MODE15)
226 0x254 (MUX_MODE15)
227 0x258 (MUX_MODE15)
228 0x25c (MUX_MODE15)
229 0x260 (MUX_MODE15)
230 0x264 (MUX_MODE15)
231 0x268 (MUX_MODE15)
232 0x26c (MUX_MODE15)
233 0x270 (MUX_MODE15)
234 0x274 (MUX_MODE15)
235 0x278 (MUX_MODE15)
236 0x27c (MUX_MODE15)
237
238 /* Slave 2 */
239 0x198 (MUX_MODE15)
240 0x19c (MUX_MODE15)
241 0x1a0 (MUX_MODE15)
242 0x1a4 (MUX_MODE15)
243 0x1a8 (MUX_MODE15)
244 0x1ac (MUX_MODE15)
245 0x1b0 (MUX_MODE15)
246 0x1b4 (MUX_MODE15)
247 0x1b8 (MUX_MODE15)
248 0x1bc (MUX_MODE15)
249 0x1c0 (MUX_MODE15)
250 0x1c4 (MUX_MODE15)
251 >;
252 };
253
254 davinci_mdio_default: davinci_mdio_default {
255 pinctrl-single,pins = <
256 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
257 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
258 >;
259 };
260
261 davinci_mdio_sleep: davinci_mdio_sleep {
262 pinctrl-single,pins = <
263 0x23c (MUX_MODE15)
264 0x240 (MUX_MODE15)
265 >;
266 };
267
268 dcan1_pins_default: dcan1_pins_default {
269 pinctrl-single,pins = <
270 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
271 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
272 >;
273 };
274
275 dcan1_pins_sleep: dcan1_pins_sleep {
276 pinctrl-single,pins = <
277 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
278 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
279 >;
280 };
281};
282
283&i2c1 {
284 status = "okay";
285 pinctrl-names = "default";
286 pinctrl-0 = <&i2c1_pins>;
287 clock-frequency = <400000>;
288
289 tps659038: tps659038@58 {
290 compatible = "ti,tps659038";
291 reg = <0x58>;
292
293 tps659038_pmic {
294 compatible = "ti,tps659038-pmic";
295
296 regulators {
297 smps123_reg: smps123 {
298 /* VDD_MPU */
299 regulator-name = "smps123";
300 regulator-min-microvolt = < 850000>;
301 regulator-max-microvolt = <1250000>;
302 regulator-always-on;
303 regulator-boot-on;
304 };
305
306 smps45_reg: smps45 {
307 /* VDD_DSPEVE */
308 regulator-name = "smps45";
309 regulator-min-microvolt = < 850000>;
310 regulator-max-microvolt = <1150000>;
311 regulator-always-on;
312 regulator-boot-on;
313 };
314
315 smps6_reg: smps6 {
316 /* VDD_GPU - over VDD_SMPS6 */
317 regulator-name = "smps6";
318 regulator-min-microvolt = <850000>;
319 regulator-max-microvolt = <1250000>;
320 regulator-always-on;
321 regulator-boot-on;
322 };
323
324 smps7_reg: smps7 {
325 /* CORE_VDD */
326 regulator-name = "smps7";
327 regulator-min-microvolt = <850000>;
328 regulator-max-microvolt = <1060000>;
329 regulator-always-on;
330 regulator-boot-on;
331 };
332
333 smps8_reg: smps8 {
334 /* VDD_IVAHD */
335 regulator-name = "smps8";
336 regulator-min-microvolt = < 850000>;
337 regulator-max-microvolt = <1250000>;
338 regulator-always-on;
339 regulator-boot-on;
340 };
341
342 smps9_reg: smps9 {
343 /* VDDS1V8 */
344 regulator-name = "smps9";
345 regulator-min-microvolt = <1800000>;
346 regulator-max-microvolt = <1800000>;
347 regulator-always-on;
348 regulator-boot-on;
349 };
350
351 ldo1_reg: ldo1 {
352 /* LDO1_OUT --> SDIO */
353 regulator-name = "ldo1";
354 regulator-min-microvolt = <1800000>;
355 regulator-max-microvolt = <3300000>;
356 regulator-boot-on;
357 };
358
359 ldo2_reg: ldo2 {
360 /* VDD_RTCIO */
361 /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
362 regulator-name = "ldo2";
363 regulator-min-microvolt = <3300000>;
364 regulator-max-microvolt = <3300000>;
365 regulator-always-on;
366 regulator-boot-on;
367 };
368
369 ldo3_reg: ldo3 {
370 /* VDDA_1V8_PHY */
371 regulator-name = "ldo3";
372 regulator-min-microvolt = <1800000>;
373 regulator-max-microvolt = <1800000>;
374 regulator-always-on;
375 regulator-boot-on;
376 };
377
378 ldo9_reg: ldo9 {
379 /* VDD_RTC */
380 regulator-name = "ldo9";
381 regulator-min-microvolt = <1050000>;
382 regulator-max-microvolt = <1050000>;
383 regulator-always-on;
384 regulator-boot-on;
385 };
386
387 ldoln_reg: ldoln {
388 /* VDDA_1V8_PLL */
389 regulator-name = "ldoln";
390 regulator-min-microvolt = <1800000>;
391 regulator-max-microvolt = <1800000>;
392 regulator-always-on;
393 regulator-boot-on;
394 };
395
396 ldousb_reg: ldousb {
397 /* VDDA_3V_USB: VDDA_USBHS33 */
398 regulator-name = "ldousb";
399 regulator-min-microvolt = <3300000>;
400 regulator-max-microvolt = <3300000>;
401 regulator-boot-on;
402 };
403 };
404 };
405 };
406
407 pcf_gpio_21: gpio@21 {
408 compatible = "ti,pcf8575";
409 reg = <0x21>;
410 lines-initial-states = <0x1408>;
411 gpio-controller;
412 #gpio-cells = <2>;
413 interrupt-parent = <&gpio6>;
414 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
415 interrupt-controller;
416 #interrupt-cells = <2>;
417 };
418
419};
420
421&i2c2 {
422 status = "okay";
423 pinctrl-names = "default";
424 pinctrl-0 = <&i2c2_pins>;
425 clock-frequency = <400000>;
426};
427
428&i2c3 {
429 status = "okay";
430 pinctrl-names = "default";
431 pinctrl-0 = <&i2c3_pins>;
432 clock-frequency = <400000>;
433};
434
435&mcspi1 {
436 status = "okay";
437 pinctrl-names = "default";
438 pinctrl-0 = <&mcspi1_pins>;
439};
440
441&mcspi2 {
442 status = "okay";
443 pinctrl-names = "default";
444 pinctrl-0 = <&mcspi2_pins>;
445};
446
447&uart1 {
448 status = "okay";
449 pinctrl-names = "default";
450 pinctrl-0 = <&uart1_pins>;
451 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
452 <&dra7_pmx_core 0x3e0>;
453};
454
455&uart2 {
456 status = "okay";
457 pinctrl-names = "default";
458 pinctrl-0 = <&uart2_pins>;
459};
460
461&uart3 {
462 status = "okay";
463 pinctrl-names = "default";
464 pinctrl-0 = <&uart3_pins>;
465};
466
467&mmc1 {
468 status = "okay";
469 vmmc-supply = <&ldo1_reg>;
470 bus-width = <4>;
471};
472
473&mmc2 {
474 status = "okay";
475 vmmc-supply = <&mmc2_3v3>;
476 bus-width = <8>;
477};
478
479&cpu0 {
480 cpu0-supply = <&smps123_reg>;
481};
482
483&qspi {
484 status = "okay";
485 pinctrl-names = "default";
486 pinctrl-0 = <&qspi1_pins>;
487
488 spi-max-frequency = <48000000>;
489 m25p80@0 {
490 compatible = "s25fl256s1";
491 spi-max-frequency = <48000000>;
492 reg = <0>;
493 spi-tx-bus-width = <1>;
494 spi-rx-bus-width = <4>;
495 spi-cpol;
496 spi-cpha;
497 #address-cells = <1>;
498 #size-cells = <1>;
499
500 /* MTD partition table.
501 * The ROM checks the first four physical blocks
502 * for a valid file to boot and the flash here is
503 * 64KiB block size.
504 */
505 partition@0 {
506 label = "QSPI.SPL";
507 reg = <0x00000000 0x000010000>;
508 };
509 partition@1 {
510 label = "QSPI.SPL.backup1";
511 reg = <0x00010000 0x00010000>;
512 };
513 partition@2 {
514 label = "QSPI.SPL.backup2";
515 reg = <0x00020000 0x00010000>;
516 };
517 partition@3 {
518 label = "QSPI.SPL.backup3";
519 reg = <0x00030000 0x00010000>;
520 };
521 partition@4 {
522 label = "QSPI.u-boot";
523 reg = <0x00040000 0x00100000>;
524 };
525 partition@5 {
526 label = "QSPI.u-boot-spl-os";
527 reg = <0x00140000 0x00080000>;
528 };
529 partition@6 {
530 label = "QSPI.u-boot-env";
531 reg = <0x001c0000 0x00010000>;
532 };
533 partition@7 {
534 label = "QSPI.u-boot-env.backup1";
535 reg = <0x001d0000 0x0010000>;
536 };
537 partition@8 {
538 label = "QSPI.kernel";
539 reg = <0x001e0000 0x0800000>;
540 };
541 partition@9 {
542 label = "QSPI.file-system";
543 reg = <0x009e0000 0x01620000>;
544 };
545 };
546};
547
548&omap_dwc3_1 {
549 extcon = <&extcon_usb1>;
550};
551
552&omap_dwc3_2 {
553 extcon = <&extcon_usb2>;
554};
555
556&usb1 {
557 dr_mode = "peripheral";
558 pinctrl-names = "default";
559 pinctrl-0 = <&usb1_pins>;
560};
561
562&usb2 {
563 dr_mode = "host";
564 pinctrl-names = "default";
565 pinctrl-0 = <&usb2_pins>;
566};
567
568&elm {
569 status = "okay";
570};
571
572&gpmc {
573 status = "okay";
574 pinctrl-names = "default";
575 pinctrl-0 = <&nand_flash_x16>;
576 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
577 nand@0,0 {
578 reg = <0 0 4>; /* device IO registers */
579 ti,nand-ecc-opt = "bch8";
580 ti,elm-id = <&elm>;
581 nand-bus-width = <16>;
582 gpmc,device-width = <2>;
583 gpmc,sync-clk-ps = <0>;
584 gpmc,cs-on-ns = <0>;
585 gpmc,cs-rd-off-ns = <80>;
586 gpmc,cs-wr-off-ns = <80>;
587 gpmc,adv-on-ns = <0>;
588 gpmc,adv-rd-off-ns = <60>;
589 gpmc,adv-wr-off-ns = <60>;
590 gpmc,we-on-ns = <10>;
591 gpmc,we-off-ns = <50>;
592 gpmc,oe-on-ns = <4>;
593 gpmc,oe-off-ns = <40>;
594 gpmc,access-ns = <40>;
595 gpmc,wr-access-ns = <80>;
596 gpmc,rd-cycle-ns = <80>;
597 gpmc,wr-cycle-ns = <80>;
598 gpmc,bus-turnaround-ns = <0>;
599 gpmc,cycle2cycle-delay-ns = <0>;
600 gpmc,clk-activation-ns = <0>;
601 gpmc,wait-monitoring-ns = <0>;
602 gpmc,wr-data-mux-bus-ns = <0>;
603 /* MTD partition table */
604 /* All SPL-* partitions are sized to minimal length
605 * which can be independently programmable. For
606 * NAND flash this is equal to size of erase-block */
607 #address-cells = <1>;
608 #size-cells = <1>;
609 partition@0 {
610 label = "NAND.SPL";
611 reg = <0x00000000 0x000020000>;
612 };
613 partition@1 {
614 label = "NAND.SPL.backup1";
615 reg = <0x00020000 0x00020000>;
616 };
617 partition@2 {
618 label = "NAND.SPL.backup2";
619 reg = <0x00040000 0x00020000>;
620 };
621 partition@3 {
622 label = "NAND.SPL.backup3";
623 reg = <0x00060000 0x00020000>;
624 };
625 partition@4 {
626 label = "NAND.u-boot-spl-os";
627 reg = <0x00080000 0x00040000>;
628 };
629 partition@5 {
630 label = "NAND.u-boot";
631 reg = <0x000c0000 0x00100000>;
632 };
633 partition@6 {
634 label = "NAND.u-boot-env";
635 reg = <0x001c0000 0x00020000>;
636 };
637 partition@7 {
638 label = "NAND.u-boot-env.backup1";
639 reg = <0x001e0000 0x00020000>;
640 };
641 partition@8 {
642 label = "NAND.kernel";
643 reg = <0x00200000 0x00800000>;
644 };
645 partition@9 {
646 label = "NAND.file-system";
647 reg = <0x00a00000 0x0f600000>;
648 };
649 };
650};
651
652&usb2_phy1 {
653 phy-supply = <&ldousb_reg>;
654};
655
656&usb2_phy2 {
657 phy-supply = <&ldousb_reg>;
658};
659
660&gpio7 {
661 ti,no-reset-on-init;
662 ti,no-idle-on-init;
663};
664
665&mac {
666 status = "okay";
667 pinctrl-names = "default", "sleep";
668 pinctrl-0 = <&cpsw_default>;
669 pinctrl-1 = <&cpsw_sleep>;
670 dual_emac;
671};
672
673&cpsw_emac0 {
674 phy_id = <&davinci_mdio>, <2>;
675 phy-mode = "rgmii";
676 dual_emac_res_vlan = <1>;
677};
678
679&cpsw_emac1 {
680 phy_id = <&davinci_mdio>, <3>;
681 phy-mode = "rgmii";
682 dual_emac_res_vlan = <2>;
683};
684
685&davinci_mdio {
686 pinctrl-names = "default", "sleep";
687 pinctrl-0 = <&davinci_mdio_default>;
688 pinctrl-1 = <&davinci_mdio_sleep>;
689};
690
691&dcan1 {
692 status = "ok";
693 pinctrl-names = "default", "sleep", "active";
694 pinctrl-0 = <&dcan1_pins_sleep>;
695 pinctrl-1 = <&dcan1_pins_sleep>;
696 pinctrl-2 = <&dcan1_pins_default>;
697};