blob: 3ec7649a1d4a510024af278fa2ef00bece84ef08 [file] [log] [blame]
Ajay Bhargav26749582011-08-04 21:26:02 +05301/*
2 * (C) Copyright 2011
3 * eInfochips Ltd. <www.einfochips.com>
Ajay Bhargavc7c47ca2016-12-21 13:28:06 +05304 * Written-by: Ajay Bhargav <contact@8051projects.net>
Ajay Bhargav26749582011-08-04 21:26:02 +05305 *
6 * Based on Aspenite:
7 * (C) Copyright 2010
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
11 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020012 * SPDX-License-Identifier: GPL-2.0+
Ajay Bhargav26749582011-08-04 21:26:02 +053013 */
14
15#ifndef __CONFIG_GPLUGD_H
16#define __CONFIG_GPLUGD_H
17
18/*
Ajay Bhargav26749582011-08-04 21:26:02 +053019 * High Level Configuration Options
20 */
21#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
22#define CONFIG_ARMADA100 1 /* SOC Family Name */
23#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
Tom Rini92a1bab2017-01-25 20:42:36 -050024#define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
Ajay Bhargav26749582011-08-04 21:26:02 +053025#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
26
27#define CONFIG_SYS_TEXT_BASE 0x00f00000
28
29/*
30 * There is no internal RAM in ARMADA100, using DRAM
31 * TBD: dcache to be used for this
32 */
33#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
34#define CONFIG_NR_DRAM_BANKS_MAX 2
35
36/*
37 * Commands configuration
38 */
Ajay Bhargavaa0ecfe2011-09-13 22:22:04 +053039
40/* Disable DCACHE */
41#define CONFIG_SYS_DCACHE_OFF
42
43/* Network configuration */
44#ifdef CONFIG_CMD_NET
Ajay Bhargavaa0ecfe2011-09-13 22:22:04 +053045#define CONFIG_ARMADA100_FEC
46
47/* DHCP Support */
Ajay Bhargavaa0ecfe2011-09-13 22:22:04 +053048#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
49#endif /* CONFIG_CMD_NET */
Ajay Bhargav26749582011-08-04 21:26:02 +053050
Ajay Bhargav47e75d72011-09-13 22:22:13 +053051/* GPIO Support */
52#define CONFIG_MARVELL_GPIO
53
54/* PHY configuration */
55#define CONFIG_MII
Ajay Bhargav47e75d72011-09-13 22:22:13 +053056#define CONFIG_RESET_PHY_R
57/* 88E3015 register definition */
58#define PHY_LED_PAR_SEL_REG 22
59#define PHY_LED_MAN_REG 25
60#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
61/* GPIO Configuration for PHY */
62#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
63
Ajay Bhargav2f83cd52011-10-03 14:00:58 +053064/* Flash Support */
Ajay Bhargav2f83cd52011-10-03 14:00:58 +053065
Ajay Bhargav26749582011-08-04 21:26:02 +053066/*
67 * mv-common.h should be defined after CMD configs since it used them
68 * to enable certain macros
69 */
70#include "mv-common.h"
Ajay Bhargav26749582011-08-04 21:26:02 +053071
72#ifdef CONFIG_SYS_NS16550_COM1
73#undef CONFIG_SYS_NS16550_COM1
74#endif /* CONFIG_SYS_NS16550_COM1 */
75
76#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
77
78/*
79 * Environment variables configurations
80 */
Jagan Tekicb71c6d2016-11-25 00:58:58 +053081#define CONFIG_ENV_IS_NOWHERE
Ajay Bhargavb5de0382011-10-03 14:00:58 +053082#define CONFIG_ENV_SIZE 0x4000
Ajay Bhargavb5de0382011-10-03 14:00:58 +053083
Ajay Bhargav099cb1e2012-02-13 03:27:44 +000084#ifdef CONFIG_CMD_USB
85#define CONFIG_USB_EHCI
86#define CONFIG_USB_EHCI_ARMADA100
87#define CONFIG_EHCI_IS_TDI
Ajay Bhargav099cb1e2012-02-13 03:27:44 +000088#endif /* CONFIG_CMD_USB */
89
Ajay Bhargav099cb1e2012-02-13 03:27:44 +000090#define CONFIG_SUPPORT_VFAT
91
Ajay Bhargav26749582011-08-04 21:26:02 +053092#endif /* __CONFIG_GPLUGD_H */