blob: 25540b7694d590dea1c3c54c5453d4a7217d9f37 [file] [log] [blame]
Marcus Coopera9e19b82019-06-02 08:38:40 +02001/*
2 * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
49
50/ {
51 model = "Beelink X2";
52 compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
53
54 aliases {
55 serial0 = &uart0;
56 ethernet0 = &emac;
57 ethernet1 = &sdiowifi;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63
64 connector {
65 compatible = "hdmi-connector";
66 type = "a";
67
68 port {
69 hdmi_con_in: endpoint {
70 remote-endpoint = <&hdmi_out_con>;
71 };
72 };
73 };
74
75 leds {
76 compatible = "gpio-leds";
77
78 blue {
79 label = "beelink-x2:blue:pwr";
80 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
81 default-state = "on";
82 };
83
84 red {
85 label = "beelink-x2:red:standby";
86 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
87 };
88 };
89
90 wifi_pwrseq: wifi_pwrseq {
91 compatible = "mmc-pwrseq-simple";
92 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
93 };
94
95 sound_spdif {
96 compatible = "simple-audio-card";
97 simple-audio-card,name = "On-board SPDIF";
98
99 simple-audio-card,cpu {
100 sound-dai = <&spdif>;
101 };
102
103 simple-audio-card,codec {
104 sound-dai = <&spdif_out>;
105 };
106 };
107
108 spdif_out: spdif-out {
109 #sound-dai-cells = <0>;
110 compatible = "linux,spdif-dit";
111 };
112};
113
114&de {
115 status = "okay";
116};
117
118&ehci0 {
119 status = "okay";
120};
121
122&ehci1 {
123 status = "okay";
124};
125
126&emac {
127 phy-handle = <&int_mii_phy>;
128 phy-mode = "mii";
129 allwinner,leds-active-low;
130 status = "okay";
131};
132
133&hdmi {
134 status = "okay";
135};
136
137&hdmi_out {
138 hdmi_out_con: endpoint {
139 remote-endpoint = <&hdmi_con_in>;
140 };
141};
142
143&ir {
144 pinctrl-names = "default";
145 pinctrl-0 = <&ir_pins_a>;
146 status = "okay";
147};
148
149&mmc0 {
150 vmmc-supply = <&reg_vcc3v3>;
151 bus-width = <4>;
152 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
153 status = "okay";
154};
155
156&mmc1 {
157 vmmc-supply = <&reg_vcc3v3>;
158 bus-width = <4>;
159 non-removable;
160 status = "okay";
161
162 /*
163 * Explicitly define the sdio device, so that we can add an ethernet
164 * alias for it (which e.g. makes u-boot set a mac-address).
165 */
166 sdiowifi: sdio_wifi@1 {
167 reg = <1>;
168 };
169};
170
171&mmc2 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&mmc2_8bit_pins>;
174 vmmc-supply = <&reg_vcc3v3>;
175 bus-width = <8>;
176 non-removable;
177 cap-mmc-hw-reset;
178 status = "okay";
179};
180
181&ohci0 {
182 status = "okay";
183};
184
185&ohci1 {
186 status = "okay";
187};
188
189&reg_usb0_vbus {
190 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
191 status = "okay";
192};
193
194&spdif {
195 pinctrl-names = "default";
196 pinctrl-0 = <&spdif_tx_pins_a>;
197 status = "okay";
198};
199
200&uart0 {
201 pinctrl-names = "default";
202 pinctrl-0 = <&uart0_pins_a>;
203 status = "okay";
204};
205
206&usb_otg {
207 dr_mode = "otg";
208 status = "okay";
209};
210
211&usbphy {
212 /* USB VBUS is always on except for the OTG port */
213 status = "okay";
214 usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
215 usb0_vbus-supply = <&reg_usb0_vbus>;
216};