Andy Yan | 09aa7c4 | 2017-06-01 18:00:10 +0800 | [diff] [blame^] | 1 | /* |
| 2 | * (C) Copyright 2016 Rockchip Electronics Co., Ltd |
| 3 | * Author: Andy Yan <andy.yan@rock-chips.com> |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | #include <common.h> |
| 7 | #include <dm.h> |
| 8 | #include <errno.h> |
| 9 | #include <syscon.h> |
| 10 | #include <asm/io.h> |
| 11 | #include <asm/arch/clock.h> |
| 12 | #include <asm/arch/grf_rv1108.h> |
| 13 | #include <asm/arch/hardware.h> |
| 14 | #include <asm/arch/periph.h> |
| 15 | #include <dm/pinctrl.h> |
| 16 | |
| 17 | DECLARE_GLOBAL_DATA_PTR; |
| 18 | |
| 19 | struct rv1108_pinctrl_priv { |
| 20 | struct rv1108_grf *grf; |
| 21 | }; |
| 22 | |
| 23 | static void pinctrl_rv1108_uart_config(struct rv1108_grf *grf, int uart_id) |
| 24 | { |
| 25 | switch (uart_id) { |
| 26 | case PERIPH_ID_UART0: |
| 27 | rk_clrsetreg(&grf->gpio3a_iomux, |
| 28 | GPIO3A6_MASK | GPIO3A5_MASK, |
| 29 | GPIO3A6_UART1_SOUT << GPIO3A6_SHIFT | |
| 30 | GPIO3A5_UART1_SIN << GPIO3A5_SHIFT); |
| 31 | break; |
| 32 | case PERIPH_ID_UART1: |
| 33 | rk_clrsetreg(&grf->gpio1d_iomux, |
| 34 | GPIO1D3_MASK | GPIO1D2_MASK | GPIO1D1_MASK | |
| 35 | GPIO1D0_MASK, |
| 36 | GPIO1D3_UART0_SOUT << GPIO1D3_SHIFT | |
| 37 | GPIO1D2_UART0_SIN << GPIO1D2_SHIFT | |
| 38 | GPIO1D1_UART0_RTSN << GPIO1D1_SHIFT | |
| 39 | GPIO1D0_UART0_CTSN << GPIO1D0_SHIFT); |
| 40 | break; |
| 41 | case PERIPH_ID_UART2: |
| 42 | rk_clrsetreg(&grf->gpio2d_iomux, |
| 43 | GPIO2D2_MASK | GPIO2D1_MASK, |
| 44 | GPIO2D2_UART2_SOUT_M0 << GPIO2D2_SHIFT | |
| 45 | GPIO2D1_UART2_SIN_M0 << GPIO2D1_SHIFT); |
| 46 | break; |
| 47 | } |
| 48 | } |
| 49 | |
| 50 | static void pinctrl_rv1108_gmac_config(struct rv1108_grf *grf, int func) |
| 51 | { |
| 52 | rk_clrsetreg(&grf->gpio1b_iomux, |
| 53 | GPIO1B7_MASK | GPIO1B6_MASK | GPIO1B5_MASK | |
| 54 | GPIO1B4_MASK | GPIO1B3_MASK | GPIO1B2_MASK, |
| 55 | GPIO1B7_GMAC_RXDV << GPIO1B7_SHIFT | |
| 56 | GPIO1B6_GMAC_RXD1 << GPIO1B6_SHIFT | |
| 57 | GPIO1B5_GMAC_RXD0 << GPIO1B5_SHIFT | |
| 58 | GPIO1B4_GMAC_TXEN << GPIO1B4_SHIFT | |
| 59 | GPIO1B3_GMAC_TXD1 << GPIO1B3_SHIFT | |
| 60 | GPIO1B2_GMAC_TXD0 << GPIO1B2_SHIFT); |
| 61 | rk_clrsetreg(&grf->gpio1c_iomux, |
| 62 | GPIO1C5_MASK | GPIO1C4_MASK | |
| 63 | GPIO1C3_MASK | GPIO1C2_MASK, |
| 64 | GPIO1C5_GMAC_CLK << GPIO1C5_SHIFT | |
| 65 | GPIO1C4_GMAC_MDC << GPIO1C4_SHIFT | |
| 66 | GPIO1C3_GMAC_MDIO << GPIO1C3_SHIFT | |
| 67 | GPIO1C2_GMAC_RXER << GPIO1C2_SHIFT); |
| 68 | writel(0xffff57f5, &grf->gpio1b_drv); |
| 69 | } |
| 70 | |
| 71 | static void pinctrl_rv1108_sfc_config(struct rv1108_grf *grf) |
| 72 | { |
| 73 | rk_clrsetreg(&grf->gpio2a_iomux, GPIO2A3_MASK | GPIO2A2_MASK | |
| 74 | GPIO2A1_MASK | GPIO2A0_MASK, |
| 75 | GPIO2A3_SFC_HOLD_IO3 << GPIO2A3_SHIFT | |
| 76 | GPIO2A2_SFC_WP_IO2 << GPIO2A2_SHIFT | |
| 77 | GPIO2A1_SFC_SO_IO1 << GPIO2A1_SHIFT | |
| 78 | GPIO2A0_SFC_SI_IO0 << GPIO2A0_SHIFT); |
| 79 | rk_clrsetreg(&grf->gpio2b_iomux, GPIO2B7_MASK | GPIO2B4_MASK, |
| 80 | GPIO2B7_SFC_CLK << GPIO2B7_SHIFT | |
| 81 | GPIO2B4_SFC_CSN0 << GPIO2B4_SHIFT); |
| 82 | } |
| 83 | |
| 84 | static int rv1108_pinctrl_request(struct udevice *dev, int func, int flags) |
| 85 | { |
| 86 | struct rv1108_pinctrl_priv *priv = dev_get_priv(dev); |
| 87 | |
| 88 | switch (func) { |
| 89 | case PERIPH_ID_UART0: |
| 90 | case PERIPH_ID_UART1: |
| 91 | case PERIPH_ID_UART2: |
| 92 | pinctrl_rv1108_uart_config(priv->grf, func); |
| 93 | break; |
| 94 | case PERIPH_ID_GMAC: |
| 95 | pinctrl_rv1108_gmac_config(priv->grf, func); |
| 96 | case PERIPH_ID_SFC: |
| 97 | pinctrl_rv1108_sfc_config(priv->grf); |
| 98 | default: |
| 99 | return -EINVAL; |
| 100 | } |
| 101 | |
| 102 | return 0; |
| 103 | } |
| 104 | |
| 105 | static int rv1108_pinctrl_get_periph_id(struct udevice *dev, |
| 106 | struct udevice *periph) |
| 107 | { |
| 108 | u32 cell[3]; |
| 109 | int ret; |
| 110 | |
| 111 | ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(periph), |
| 112 | "interrupts", cell, ARRAY_SIZE(cell)); |
| 113 | if (ret < 0) |
| 114 | return -EINVAL; |
| 115 | |
| 116 | switch (cell[1]) { |
| 117 | case 11: |
| 118 | return PERIPH_ID_SDCARD; |
| 119 | case 13: |
| 120 | return PERIPH_ID_EMMC; |
| 121 | case 19: |
| 122 | return PERIPH_ID_GMAC; |
| 123 | case 30: |
| 124 | return PERIPH_ID_I2C0; |
| 125 | case 31: |
| 126 | return PERIPH_ID_I2C1; |
| 127 | case 32: |
| 128 | return PERIPH_ID_I2C2; |
| 129 | case 39: |
| 130 | return PERIPH_ID_PWM0; |
| 131 | case 44: |
| 132 | return PERIPH_ID_UART0; |
| 133 | case 45: |
| 134 | return PERIPH_ID_UART1; |
| 135 | case 46: |
| 136 | return PERIPH_ID_UART2; |
| 137 | case 56: |
| 138 | return PERIPH_ID_SFC; |
| 139 | } |
| 140 | |
| 141 | return -ENOENT; |
| 142 | } |
| 143 | |
| 144 | static int rv1108_pinctrl_set_state_simple(struct udevice *dev, |
| 145 | struct udevice *periph) |
| 146 | { |
| 147 | int func; |
| 148 | |
| 149 | func = rv1108_pinctrl_get_periph_id(dev, periph); |
| 150 | if (func < 0) |
| 151 | return func; |
| 152 | |
| 153 | return rv1108_pinctrl_request(dev, func, 0); |
| 154 | } |
| 155 | |
| 156 | static struct pinctrl_ops rv1108_pinctrl_ops = { |
| 157 | .set_state_simple = rv1108_pinctrl_set_state_simple, |
| 158 | .request = rv1108_pinctrl_request, |
| 159 | .get_periph_id = rv1108_pinctrl_get_periph_id, |
| 160 | }; |
| 161 | |
| 162 | static int rv1108_pinctrl_probe(struct udevice *dev) |
| 163 | { |
| 164 | struct rv1108_pinctrl_priv *priv = dev_get_priv(dev); |
| 165 | |
| 166 | priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| 167 | |
| 168 | return 0; |
| 169 | } |
| 170 | |
| 171 | static const struct udevice_id rv1108_pinctrl_ids[] = { |
| 172 | {.compatible = "rockchip,rv1108-pinctrl" }, |
| 173 | { } |
| 174 | }; |
| 175 | |
| 176 | U_BOOT_DRIVER(pinctrl_rv1108) = { |
| 177 | .name = "pinctrl_rv1108", |
| 178 | .id = UCLASS_PINCTRL, |
| 179 | .of_match = rv1108_pinctrl_ids, |
| 180 | .priv_auto_alloc_size = sizeof(struct rv1108_pinctrl_priv), |
| 181 | .ops = &rv1108_pinctrl_ops, |
| 182 | .bind = dm_scan_fdt_dev, |
| 183 | .probe = rv1108_pinctrl_probe, |
| 184 | }; |