| Lokesh Vutla | a0c0b97 | 2016-11-25 11:14:18 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | |
| 9 | #include "am57xx-beagle-x15-common.dtsi" |
| 10 | |
| 11 | / { |
| 12 | model = "TI AM5728 BeagleBoard-X15 rev B1"; |
| 13 | }; |
| 14 | |
| 15 | &tpd12s015 { |
| 16 | gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ |
| 17 | <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */ |
| 18 | <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ |
| 19 | }; |
| 20 | |
| 21 | &mmc1 { |
| Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 22 | pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; |
| 23 | pinctrl-0 = <&mmc1_pins_default>; |
| 24 | pinctrl-1 = <&mmc1_pins_hs>; |
| 25 | pinctrl-2 = <&mmc1_pins_sdr12>; |
| 26 | pinctrl-3 = <&mmc1_pins_sdr25>; |
| 27 | pinctrl-4 = <&mmc1_pins_sdr50>; |
| 28 | pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; |
| 29 | pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; |
| Lokesh Vutla | a0c0b97 | 2016-11-25 11:14:18 +0530 | [diff] [blame] | 30 | vmmc-supply = <&vdd_3v3>; |
| Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 31 | vqmmc-supply = <&ldo1_reg>; |
| 32 | }; |
| 33 | |
| 34 | &mmc2 { |
| 35 | pinctrl-names = "default", "hs", "ddr_1_8v"; |
| 36 | pinctrl-0 = <&mmc2_pins_default>; |
| 37 | pinctrl-1 = <&mmc2_pins_hs>; |
| 38 | pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; |
| 39 | }; |
| 40 | |
| 41 | /* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ |
| 42 | &phy1 { |
| 43 | max-speed = <100>; |
| Lokesh Vutla | a0c0b97 | 2016-11-25 11:14:18 +0530 | [diff] [blame] | 44 | }; |