| Lokesh Vutla | 0bea813 | 2016-02-24 12:30:54 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * Library to support early TI EVM EEPROM handling |
| 3 | * |
| 4 | * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com |
| 5 | * |
| 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 7 | */ |
| 8 | |
| 9 | #ifndef __BOARD_DETECT_H |
| 10 | #define __BOARD_DETECT_H |
| 11 | |
| 12 | /* TI EEPROM MAGIC Header identifier */ |
| 13 | #define TI_EEPROM_HEADER_MAGIC 0xEE3355AA |
| 14 | #define TI_DEAD_EEPROM_MAGIC 0xADEAD12C |
| 15 | |
| 16 | #define TI_EEPROM_HDR_NAME_LEN 8 |
| 17 | #define TI_EEPROM_HDR_REV_LEN 4 |
| 18 | #define TI_EEPROM_HDR_SERIAL_LEN 12 |
| 19 | #define TI_EEPROM_HDR_CONFIG_LEN 32 |
| 20 | #define TI_EEPROM_HDR_NO_OF_MAC_ADDR 3 |
| 21 | #define TI_EEPROM_HDR_ETH_ALEN 6 |
| 22 | |
| 23 | /** |
| 24 | * struct ti_am_eeprom - This structure holds data read in from the |
| 25 | * AM335x, AM437x, AM57xx TI EVM EEPROMs. |
| 26 | * @header: This holds the magic number |
| 27 | * @name: The name of the board |
| 28 | * @version: Board revision |
| 29 | * @serial: Board serial number |
| 30 | * @config: Reserved |
| 31 | * @mac_addr: Any MAC addresses written in the EEPROM |
| 32 | * |
| 33 | * The data is this structure is read from the EEPROM on the board. |
| 34 | * It is used for board detection which is based on name. It is used |
| 35 | * to configure specific TI boards. This allows booting of multiple |
| 36 | * TI boards with a single MLO and u-boot. |
| 37 | */ |
| 38 | struct ti_am_eeprom { |
| 39 | unsigned int header; |
| 40 | char name[TI_EEPROM_HDR_NAME_LEN]; |
| 41 | char version[TI_EEPROM_HDR_REV_LEN]; |
| 42 | char serial[TI_EEPROM_HDR_SERIAL_LEN]; |
| 43 | char config[TI_EEPROM_HDR_CONFIG_LEN]; |
| 44 | char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN]; |
| 45 | } __attribute__ ((__packed__)); |
| 46 | |
| 47 | /** |
| 48 | * struct ti_common_eeprom - Null terminated, usable EEPROM contents. |
| 49 | * header: Magic number |
| 50 | * @name: NULL terminated name |
| 51 | * @version: NULL terminated version |
| 52 | * @serial: NULL terminated serial number |
| 53 | * @config: NULL terminated Board specific config options |
| 54 | * @mac_addr: MAC addresses |
| 55 | */ |
| 56 | struct ti_common_eeprom { |
| 57 | u32 header; |
| 58 | char name[TI_EEPROM_HDR_NAME_LEN + 1]; |
| 59 | char version[TI_EEPROM_HDR_REV_LEN + 1]; |
| 60 | char serial[TI_EEPROM_HDR_SERIAL_LEN + 1]; |
| 61 | char config[TI_EEPROM_HDR_CONFIG_LEN + 1]; |
| 62 | char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN]; |
| 63 | }; |
| 64 | |
| 65 | #define TI_EEPROM_DATA ((struct ti_common_eeprom *)\ |
| 66 | OMAP_SRAM_SCRATCH_BOARD_EEPROM_START) |
| 67 | |
| 68 | /** |
| 69 | * ti_i2c_eeprom_am_get() - Consolidated eeprom data collection for AM* TI EVMs |
| 70 | * @bus_addr: I2C bus address |
| 71 | * @dev_addr: I2C slave address |
| 72 | * |
| 73 | * ep in SRAM is populated by the this AM generic function that consolidates |
| 74 | * the basic initialization logic common across all AM* platforms. |
| 75 | */ |
| 76 | int ti_i2c_eeprom_am_get(int bus_addr, int dev_addr); |
| 77 | |
| 78 | /** |
| 79 | * board_ti_is() - Board detection logic for TI EVMs |
| 80 | * @name_tag: Tag used in eeprom for the board |
| 81 | * |
| 82 | * Return: false if board information does not match OR eeprom wasn't read. |
| 83 | * true otherwise |
| 84 | */ |
| 85 | bool board_ti_is(char *name_tag); |
| 86 | |
| 87 | /** |
| 88 | * board_ti_rev_is() - Compare board revision for TI EVMs |
| 89 | * @rev_tag: Revision tag to check in eeprom |
| 90 | * @cmp_len: How many chars to compare? |
| 91 | * |
| 92 | * NOTE: revision information is often messed up (hence the str len match) :( |
| 93 | * |
| 94 | * Return: false if board information does not match OR eeprom was'nt read. |
| 95 | * true otherwise |
| 96 | */ |
| 97 | bool board_ti_rev_is(char *rev_tag, int cmp_len); |
| 98 | |
| 99 | /** |
| 100 | * board_ti_get_rev() - Get board revision for TI EVMs |
| 101 | * |
| 102 | * Return: NULL if eeprom was'nt read. |
| 103 | * Board revision otherwise |
| 104 | */ |
| 105 | char *board_ti_get_rev(void); |
| 106 | |
| 107 | /** |
| 108 | * board_ti_get_config() - Get board config for TI EVMs |
| 109 | * |
| 110 | * Return: NULL if eeprom was'nt read. |
| 111 | * Board config otherwise |
| 112 | */ |
| 113 | char *board_ti_get_config(void); |
| 114 | |
| 115 | /** |
| 116 | * board_ti_get_name() - Get board name for TI EVMs |
| 117 | * |
| 118 | * Return: NULL if eeprom was'nt read. |
| 119 | * Board name otherwise |
| 120 | */ |
| 121 | char *board_ti_get_name(void); |
| 122 | |
| 123 | /** |
| 124 | * board_ti_get_eth_mac_addr() - Get Ethernet MAC address from EEPROM MAC list |
| 125 | * @index: 0 based index within the list of MAC addresses |
| 126 | * @mac_addr: MAC address contained at the index is returned here |
| 127 | * |
| 128 | * Does not sanity check the mac_addr. Whatever is stored in EEPROM is returned. |
| 129 | */ |
| 130 | void board_ti_get_eth_mac_addr(int index, u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]); |
| 131 | |
| 132 | /** |
| 133 | * set_board_info_env() - Setup commonly used board information environment vars |
| 134 | * @name: Name of the board |
| 135 | * |
| 136 | * If name is NULL, default_name is used. |
| 137 | */ |
| 138 | void set_board_info_env(char *name); |
| 139 | |
| 140 | #endif /* __BOARD_DETECT_H */ |