Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 0c7fd8f4660ed612db5d9e9343f77edfe5af090b / . / include / configs / bf548-ezkit.h
blob: 65009c6f28df6061ae8b45196491fb5007e81067 [file] [log] [blame]
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]1/*
2 * U-boot - Configuration file for BF548 STAMP board
3 */
4
5#ifndef __CONFIG_BF548_EZKIT_H__
6#define __CONFIG_BF548_EZKIT_H__
7
Mike Frysingerf348ab82009-04-24 17:22:40 -0400[diff] [blame]8#include <asm/config-pre.h>
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]9
10
11/*
12 * Processor Settings
13 */
Mike Frysingerfbcf8e82010-12-23 14:58:37 -0500[diff] [blame]14#define CONFIG_BFIN_CPU bf548-0.0
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]15#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
16
17
18/*
19 * Clock Settings
20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
22 */
23/* CONFIG_CLKIN_HZ is any value in Hz */
24#define CONFIG_CLKIN_HZ 25000000
25/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
26/* 1 = CLKIN / 2 */
27#define CONFIG_CLKIN_HALF 0
28/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
29/* 1 = bypass PLL */
30#define CONFIG_PLL_BYPASS 0
31/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
32/* Values can range from 0-63 (where 0 means 64) */
33#define CONFIG_VCO_MULT 21
34/* CCLK_DIV controls the core clock divider */
35/* Values can be 1, 2, 4, or 8 ONLY */
36#define CONFIG_CCLK_DIV 1
37/* SCLK_DIV controls the system clock divider */
38/* Values can range from 1-15 */
39#define CONFIG_SCLK_DIV 4
40
41
42/*
43 * Memory Settings
44 */
45#define CONFIG_MEM_ADD_WDTH 10
46#define CONFIG_MEM_SIZE 64
47
48#define CONFIG_EBIU_DDRCTL0_VAL 0x218A83FE
49#define CONFIG_EBIU_DDRCTL1_VAL 0x20022222
50#define CONFIG_EBIU_DDRCTL2_VAL 0x00000021
51
52/* Default EZ-Kit bank mapping:
53 * Async Bank 0 - 32MB Burst Flash
54 * Async Bank 1 - Ethernet
55 * Async Bank 2 - Nothing
56 * Async Bank 3 - Nothing
57 */
58#define CONFIG_EBIU_AMGCTL_VAL 0xFF
59#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
60#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
61#define CONFIG_EBIU_FCTL_VAL (BCLK_4)
62#define CONFIG_EBIU_MODE_VAL (B0MODE_FLASH)
63
Mike Frysingerfea63e22009-06-14 21:23:27 -0400[diff] [blame]64#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]65#define CONFIG_SYS_MALLOC_LEN (768 * 1024)
66
67
68/*
69 * Network Settings
70 */
71#define ADI_CMDS_NETWORK 1
Ben Warren736fead2009-07-20 22:01:11 -0700[diff] [blame]72#define CONFIG_SMC911X 1
73#define CONFIG_SMC911X_BASE 0x24000000
74#define CONFIG_SMC911X_16_BIT
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]75#define CONFIG_HOSTNAME bf548-ezkit
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]76
77
78/*
79 * Flash Settings
80 */
81#define CONFIG_FLASH_CFI_DRIVER
82#define CONFIG_SYS_FLASH_BASE 0x20000000
83#define CONFIG_SYS_FLASH_CFI
84#define CONFIG_SYS_FLASH_PROTECTION
85#define CONFIG_SYS_MAX_FLASH_BANKS 1
86#define CONFIG_SYS_MAX_FLASH_SECT 259
87
88
89/*
90 * SPI Settings
91 */
92#define CONFIG_BFIN_SPI
93#define CONFIG_ENV_SPI_MAX_HZ 30000000
Mike Frysingerafac8b02009-06-14 22:29:35 -0400[diff] [blame]94#define CONFIG_SF_DEFAULT_SPEED 30000000
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]95
96
97/*
98 * Env Storage Settings
99 */
100#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
101#define CONFIG_ENV_IS_IN_SPI_FLASH
102#define CONFIG_ENV_OFFSET 0x10000
103#define CONFIG_ENV_SIZE 0x2000
104#define CONFIG_ENV_SECT_SIZE 0x10000
Mike Frysinger76d82182009-07-21 22:17:36 -0400[diff] [blame]105#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]106#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
107#define CONFIG_ENV_IS_IN_NAND
Mike Frysingerd413dbc2011-03-17 17:07:47 -0400[diff] [blame]108#define CONFIG_ENV_OFFSET 0x60000
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]109#define CONFIG_ENV_SIZE 0x20000
110#else
Mike Frysinger1b48f122011-05-09 15:43:27 -0400[diff] [blame]111/* The BF548-EZKIT uses a top boot flash */
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]112#define CONFIG_ENV_IS_IN_FLASH 1
Mike Frysinger1b48f122011-05-09 15:43:27 -0400[diff] [blame]113#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
114#define CONFIG_ENV_OFFSET (0x1000000 - CONFIG_ENV_SECT_SIZE)
115#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
116#define CONFIG_ENV_SECT_SIZE 0x8000
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]117#endif
118
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]119/*
120 * NAND Settings
121 */
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]122#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
Bob Liue0ae4332013-02-05 19:22:20 +0800[diff] [blame]123#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
124#define CONFIG_BFIN_NFC_BOOTROM_ECC
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]125#define CONFIG_DRIVER_NAND_BFIN
Bob Liue0ae4332013-02-05 19:22:20 +0800[diff] [blame]126#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
127#define CONFIG_SYS_MAX_NAND_DEVICE 1
128#endif
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]129
130/*
131 * I2C Settings
132 */
Scott Jiangc4697032014-11-13 15:30:55 +0800[diff] [blame]133#define CONFIG_SYS_I2C
Scott Jiangfea9b692014-11-13 15:30:53 +0800[diff] [blame]134#define CONFIG_SYS_I2C_ADI
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]135
136
137/*
138 * SATA
139 */
140#if !defined(__ADSPBF544__)
141#define CONFIG_LIBATA
142#define CONFIG_SYS_SATA_MAX_DEVICE 1
143#define CONFIG_LBA48
144#define CONFIG_PATA_BFIN
145#define CONFIG_BFIN_ATAPI_BASE_ADDR 0xFFC03800
146#define CONFIG_BFIN_ATA_MODE XFER_PIO_4
147#endif
148
149
150/*
151 * SDH Settings
152 */
153#if !defined(__ADSPBF544__)
Cliff Caie54c8202009-11-20 08:24:43 +0000[diff] [blame]154#define CONFIG_GENERIC_MMC
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]155#define CONFIG_MMC
156#define CONFIG_BFIN_SDH
157#endif
158
159
160/*
161 * USB Settings
162 */
163#if !defined(__ADSPBF544__)
164#define CONFIG_USB
Paul Kocialkowski95de1e22015-08-04 17:04:06 +0200[diff] [blame]165#define CONFIG_USB_MUSB_HCD
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]166#define CONFIG_USB_BLACKFIN
167#define CONFIG_USB_STORAGE
Paul Kocialkowski95de1e22015-08-04 17:04:06 +0200[diff] [blame]168#define CONFIG_USB_MUSB_TIMEOUT 100000
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]169#endif
170
171
172/*
173 * Misc Settings
174 */
175#define CONFIG_BOARD_EARLY_INIT_F
Mike Frysinger58d75702010-10-19 18:02:43 -0400[diff] [blame]176#define CONFIG_BOARD_SIZE_LIMIT $$(( 512 * 1024 ))
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]177#define CONFIG_RTC_BFIN
178#define CONFIG_UART_CONSOLE 1
Mike Frysingerabaa5ba2010-09-29 20:24:16 +0000[diff] [blame]179#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]180
Sonic Zhangda34aae2013-05-02 13:46:21 +0800[diff] [blame]181#define CONFIG_ADI_GPIO2
182
Bob Liue0ae4332013-02-05 19:22:20 +0800[diff] [blame]183#undef CONFIG_VIDEO
184#ifdef CONFIG_VIDEO
185#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h >
186#define CONFIG_DEB_DMA_URGENT
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]187#endif
188
189/* Define if want to do post memory test */
190#undef CONFIG_POST
191#ifdef CONFIG_POST
Mike Frysinger21513742011-05-10 16:22:25 -0400[diff] [blame]192#define CONFIG_POST_BSPEC1_GPIO_LEDS \
193 GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11,
194#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
195 GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11
196#define CONFIG_POST_BSPEC2_GPIO_NAMES \
197 13, 12, 11, 10,
Mike Frysinger22f45ce2011-05-10 16:48:36 -0400[diff] [blame]198#define CONFIG_SYS_POST_FLASH_START 10
199#define CONFIG_SYS_POST_FLASH_END 127
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]200#endif
201
202
203/*
204 * Pull in common ADI header for remaining command/environment setup
205 */
206#include <configs/bfin_adi_common.h>
207
Mike Frysinger76d21802008-10-12 05:05:42 -0400[diff] [blame]208#endif