blob: 8315cfe62ba2194414967a7ba801f41b9aca7524 [file] [log] [blame]
wdenk7d393ae2002-10-25 21:08:05 +00001/*
2 * (C) Copyright 2001, 2002
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/***********************************************************
32 * High Level Configuration Options
33 * (easy to change)
34 ***********************************************************/
35#define CONFIG_405GP 1 /* This is a PPC405 CPU */
36#define CONFIG_4xx 1 /* ...member of PPC4xx family */
37#define CONFIG_MIP405 1 /* ...on a MIP405 board */
38/***********************************************************
wdenkf3e0de62003-06-04 15:05:30 +000039 * Note that it may also be a MIP405T board which is a subset of the
40 * MIP405
41 ***********************************************************/
42/***********************************************************
43 * WARNING:
44 * CONFIG_BOOT_PCI is only used for first boot-up and should
45 * NOT be enabled for production bootloader
46 ***********************************************************/
wdenk8bde7f72003-06-27 21:31:46 +000047/*#define CONFIG_BOOT_PCI 1*/
wdenkf3e0de62003-06-04 15:05:30 +000048/***********************************************************
wdenk7d393ae2002-10-25 21:08:05 +000049 * Clock
50 ***********************************************************/
51#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
52
wdenk7d393ae2002-10-25 21:08:05 +000053
Jon Loeliger8353e132007-07-08 14:14:17 -050054/*
Jon Loeliger659e2f62007-07-10 09:10:49 -050055 * BOOTP options
56 */
57#define CONFIG_BOOTP_BOOTFILESIZE
58#define CONFIG_BOOTP_BOOTPATH
59#define CONFIG_BOOTP_GATEWAY
60#define CONFIG_BOOTP_HOSTNAME
61
62
63/*
Jon Loeliger8353e132007-07-08 14:14:17 -050064 * Command line configuration.
65 */
66#include <config_cmd_default.h>
wdenkf3e0de62003-06-04 15:05:30 +000067
Jon Loeliger8353e132007-07-08 14:14:17 -050068#define CONFIG_CMD_CACHE
69#define CONFIG_CMD_DATE
70#define CONFIG_CMD_DHCP
71#define CONFIG_CMD_EEPROM
72#define CONFIG_CMD_ELF
73#define CONFIG_CMD_FAT
74#define CONFIG_CMD_I2C
75#define CONFIG_CMD_IDE
76#define CONFIG_CMD_IRQ
77#define CONFIG_CMD_JFFS2
78#define CONFIG_CMD_MII
79#define CONFIG_CMD_PCI
80#define CONFIG_CMD_PING
81#define CONFIG_CMD_REGINFO
82#define CONFIG_CMD_SAVES
83#define CONFIG_CMD_BSP
84
85#if !defined(CONFIG_MIP405T)
86 #define CONFIG_CMD_USB
87 #define CONFIG_CMD_DOC
wdenkf3e0de62003-06-04 15:05:30 +000088#endif
89
wdenk7d393ae2002-10-25 21:08:05 +000090
Jean-Christophe PLAGNIOL-VILLARDcc4a0ce2008-08-13 01:40:43 +020091#define CONFIG_NAND_LEGACY
Bartlomiej Siekaaddb2e12006-03-05 18:57:33 +010092
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020093#define CONFIG_SYS_HUSH_PARSER
94#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenk7d393ae2002-10-25 21:08:05 +000095/**************************************************************
96 * I2C Stuff:
97 * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address
98 * 0x53.
99 * The Atmel EEPROM uses 16Bit addressing.
100 ***************************************************************/
101
102#define CONFIG_HARD_I2C /* I2c with hardware support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */
104#define CONFIG_SYS_I2C_SLAVE 0x7F
wdenk7d393ae2002-10-25 21:08:05 +0000105
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200106#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 /* EEPROM 24C128/256 */
107#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
wdenk7d393ae2002-10-25 21:08:05 +0000108/* mask of address bits that overflow into the "EEPROM chip address" */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200109#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
110#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel 24C128/256 has */
wdenk7d393ae2002-10-25 21:08:05 +0000111 /* 64 byte page write mode using*/
112 /* last 6 bits of the address */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200113#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
wdenk7d393ae2002-10-25 21:08:05 +0000114
115
Jean-Christophe PLAGNIOL-VILLARDbb1f8b42008-09-05 09:19:30 +0200116#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200117#define CONFIG_ENV_OFFSET 0x00000 /* environment starts at the beginning of the EEPROM */
118#define CONFIG_ENV_SIZE 0x00800 /* 2k bytes may be used for env vars */
wdenk7d393ae2002-10-25 21:08:05 +0000119
120/***************************************************************
121 * Definitions for Serial Presence Detect EEPROM address
122 * (to get SDRAM settings)
123 ***************************************************************/
wdenkf3e0de62003-06-04 15:05:30 +0000124/*#define SDRAM_EEPROM_WRITE_ADDRESS 0xA0
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200125#define SDRAM_EEPROM_READ_ADDRESS 0xA1
wdenkf3e0de62003-06-04 15:05:30 +0000126*/
wdenk7d393ae2002-10-25 21:08:05 +0000127/**************************************************************
128 * Environment definitions
129 **************************************************************/
130#define CONFIG_BAUDRATE 9600 /* STD Baudrate */
131#define CONFIG_BOOTDELAY 5
132/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
Wolfgang Denk2afbe4e2005-08-13 02:04:37 +0200133/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200134#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
wdenk7d393ae2002-10-25 21:08:05 +0000135
wdenk3e386912003-04-05 00:53:31 +0000136#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
wdenk7d393ae2002-10-25 21:08:05 +0000137#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
138
139#define CONFIG_IPADDR 10.0.0.100
140#define CONFIG_SERVERIP 10.0.0.1
141#define CONFIG_PREBOOT
142/***************************************************************
143 * defines if the console is stored in the environment
144 ***************************************************************/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200145#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */
wdenk7d393ae2002-10-25 21:08:05 +0000146/***************************************************************
147 * defines if an overwrite_console function exists
148 *************************************************************/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200149#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
150#define CONFIG_SYS_CONSOLE_INFO_QUIET
wdenk7d393ae2002-10-25 21:08:05 +0000151/***************************************************************
152 * defines if the overwrite_console should be stored in the
153 * environment
154 **************************************************************/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
wdenk7d393ae2002-10-25 21:08:05 +0000156
157/**************************************************************
158 * loads config
159 *************************************************************/
160#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200161#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
wdenk7d393ae2002-10-25 21:08:05 +0000162
163#define CONFIG_MISC_INIT_R
164/***********************************************************
165 * Miscellaneous configurable options
166 **********************************************************/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200167#define CONFIG_SYS_LONGHELP /* undef to save memory */
168#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger8353e132007-07-08 14:14:17 -0500169#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200170#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk7d393ae2002-10-25 21:08:05 +0000171#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200172#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk7d393ae2002-10-25 21:08:05 +0000173#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200174#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
175#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
176#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk7d393ae2002-10-25 21:08:05 +0000177
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200178#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
179#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */
wdenk7d393ae2002-10-25 21:08:05 +0000180
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200181#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
182#define CONFIG_SYS_BASE_BAUD 916667
wdenk7d393ae2002-10-25 21:08:05 +0000183
184/* The following table includes the supported baudrates */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200185#define CONFIG_SYS_BAUDRATE_TABLE \
wdenk7d393ae2002-10-25 21:08:05 +0000186 { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
187 57600, 115200, 230400, 460800, 921600 }
188
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200189#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
190#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
wdenk7d393ae2002-10-25 21:08:05 +0000191
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200192#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenk7d393ae2002-10-25 21:08:05 +0000193
194/*-----------------------------------------------------------------------
195 * PCI stuff
196 *-----------------------------------------------------------------------
197 */
198#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
199#define PCI_HOST_FORCE 1 /* configure as pci host */
200#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
201
202#define CONFIG_PCI /* include pci support */
203#define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */
204#define CONFIG_PCI_PNP /* pci plug-and-play */
205 /* resource configuration */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200206#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
207#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
208#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
209#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
210#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
211#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
212#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
213#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
wdenk7d393ae2002-10-25 21:08:05 +0000214
215/*-----------------------------------------------------------------------
216 * Start addresses for the final memory configuration
217 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200218 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenk7d393ae2002-10-25 21:08:05 +0000219 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200220#define CONFIG_SYS_SDRAM_BASE 0x00000000
221#define CONFIG_SYS_FLASH_BASE 0xFFF80000
222#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
223#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
224#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc() */
wdenk7d393ae2002-10-25 21:08:05 +0000225
226/*
227 * For booting Linux, the board info and command line data
228 * have to be in the first 8 MB of memory, since this is
229 * the maximum mapped by the Linux kernel during initialization.
230 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200231#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenk7d393ae2002-10-25 21:08:05 +0000232/*-----------------------------------------------------------------------
233 * FLASH organization
234 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200235#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
236#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
wdenk7d393ae2002-10-25 21:08:05 +0000237
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
239#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenk7d393ae2002-10-25 21:08:05 +0000240
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200241/*
242 * JFFS2 partitions
243 *
244 */
245/* No command line, one static partition, whole device */
Stefan Roese68d7d652009-03-19 13:30:36 +0100246#undef CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200247#define CONFIG_JFFS2_DEV "nor0"
248#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
249#define CONFIG_JFFS2_PART_OFFSET 0x00000000
250
251/* mtdparts command line support */
252/* Note: fake mtd_id used, no linux mtd map file */
253/*
Stefan Roese68d7d652009-03-19 13:30:36 +0100254#define CONFIG_CMD_MTDPARTS
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200255#define MTDIDS_DEFAULT "nor0=mip405-0"
256#define MTDPARTS_DEFAULT "mtdparts=mip405-0:-(jffs2)"
257*/
wdenk63e73c92004-02-23 22:22:28 +0000258
wdenk7d393ae2002-10-25 21:08:05 +0000259/*-----------------------------------------------------------------------
wdenk63e73c92004-02-23 22:22:28 +0000260 * Logbuffer Configuration
261 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200262#undef CONFIG_LOGBUFFER /* supported but not enabled */
wdenk63e73c92004-02-23 22:22:28 +0000263/*-----------------------------------------------------------------------
264 * Bootcountlimit Configuration
265 */
266#undef CONFIG_BOOTCOUNT_LIMIT /* supported but not enabled */
267
268/*-----------------------------------------------------------------------
269 * POST Configuration
270 */
271#if 0 /* enable this if POST is desired (is supported but not enabled) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200272#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
273 CONFIG_SYS_POST_CPU | \
274 CONFIG_SYS_POST_RTC | \
275 CONFIG_SYS_POST_I2C)
wdenk63e73c92004-02-23 22:22:28 +0000276
277#endif
wdenk7d393ae2002-10-25 21:08:05 +0000278/*
279 * Init Memory Controller:
280 */
wdenk7205e402003-09-10 22:30:53 +0000281#define FLASH_MAX_SIZE 0x00800000 /* 8MByte max */
282#define FLASH_BASE_PRELIM 0xFF800000 /* open the flash CS */
283/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
284#define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */
wdenk7d393ae2002-10-25 21:08:05 +0000285
wdenkc837dcb2004-01-20 23:12:12 +0000286#define CONFIG_BOARD_EARLY_INIT_F 1
wdenk7d393ae2002-10-25 21:08:05 +0000287
288/* Peripheral Bus Mapping */
289#define PER_PLD_ADDR 0xF4000000 /* smallest window is 1MByte 0x10 0000*/
290#define PER_UART0_ADDR 0xF4100000 /* smallest window is 1MByte 0x10 0000*/
291#define PER_UART1_ADDR 0xF4200000 /* smallest window is 1MByte 0x10 0000*/
292
293#define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200294#define CONFIG_PORT_ADDR PER_PLD_ADDR + 5
wdenk7d393ae2002-10-25 21:08:05 +0000295
296
wdenk7d393ae2002-10-25 21:08:05 +0000297/*-----------------------------------------------------------------------
298 * Definitions for initial stack pointer and data area (in On Chip SRAM)
299 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200300#define CONFIG_SYS_TEMP_STACK_OCM 1
301#define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000
302#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
303#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */
304#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of On Chip SRAM */
305#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
306#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
wdenk63e73c92004-02-23 22:22:28 +0000307/* reserve some memory for POST and BOOT limit info */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200308#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32)
wdenk63e73c92004-02-23 22:22:28 +0000309
310#ifdef CONFIG_POST /* reserve one word for POST Info */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200311#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 4)
wdenk63e73c92004-02-23 22:22:28 +0000312#endif
313
314#ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200315#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
wdenk63e73c92004-02-23 22:22:28 +0000316#endif
wdenk7d393ae2002-10-25 21:08:05 +0000317
318/*
319 * Internal Definitions
320 *
321 * Boot Flags
322 */
323#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
324#define BOOTFLAG_WARM 0x02 /* Software reboot */
325
326
327/***********************************************************************
328 * External peripheral base address
329 ***********************************************************************/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200330#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xE8000000
wdenk7d393ae2002-10-25 21:08:05 +0000331
332/***********************************************************************
333 * Last Stage Init
334 ***********************************************************************/
335#define CONFIG_LAST_STAGE_INIT
336/************************************************************
337 * Ethernet Stuff
338 ***********************************************************/
Ben Warren96e21f82008-10-27 23:50:15 -0700339#define CONFIG_PPC4xx_EMAC
wdenk7d393ae2002-10-25 21:08:05 +0000340#define CONFIG_MII 1 /* MII PHY management */
341#define CONFIG_PHY_ADDR 1 /* PHY address */
wdenk63e73c92004-02-23 22:22:28 +0000342#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
343#define CONFIG_PHY_CMD_DELAY 40 /* Intel LXT971A needs this */
Ben Warren18cc7af2009-04-28 16:50:53 -0700344#define CONFIG_NET_MULTI
wdenk7d393ae2002-10-25 21:08:05 +0000345/************************************************************
346 * RTC
347 ***********************************************************/
348#define CONFIG_RTC_MC146818
349#undef CONFIG_WATCHDOG /* watchdog disabled */
350
351/************************************************************
352 * IDE/ATA stuff
353 ************************************************************/
wdenkf3e0de62003-06-04 15:05:30 +0000354#if defined(CONFIG_MIP405T)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200355#define CONFIG_SYS_IDE_MAXBUS 1 /* MIP405T has only one IDE bus */
wdenkf3e0de62003-06-04 15:05:30 +0000356#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200357#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
wdenkf3e0de62003-06-04 15:05:30 +0000358#endif
359
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200360#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
wdenk7d393ae2002-10-25 21:08:05 +0000361
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200362#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS /* base address */
363#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
364#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */
365#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */
366#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */
367#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */
wdenk7d393ae2002-10-25 21:08:05 +0000368
369#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
370#undef CONFIG_IDE_LED /* no led for ide supported */
371#define CONFIG_IDE_RESET /* reset for ide supported... */
372#define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */
wdenk7205e402003-09-10 22:30:53 +0000373#define CONFIG_SUPPORT_VFAT
wdenk7d393ae2002-10-25 21:08:05 +0000374/************************************************************
375 * ATAPI support (experimental)
376 ************************************************************/
377#define CONFIG_ATAPI /* enable ATAPI Support */
378
379/************************************************************
wdenk7d393ae2002-10-25 21:08:05 +0000380 * DISK Partition support
381 ************************************************************/
382#define CONFIG_DOS_PARTITION
383#define CONFIG_MAC_PARTITION
384#define CONFIG_ISO_PARTITION /* Experimental */
385
386/************************************************************
387 * Disk-On-Chip configuration
388 ************************************************************/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200389#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
390#define CONFIG_SYS_DOC_SHORT_TIMEOUT
391#define CONFIG_SYS_DOC_SUPPORT_2000
392#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
wdenk7d393ae2002-10-25 21:08:05 +0000393/************************************************************
394 * Keyboard support
395 ************************************************************/
396#undef CONFIG_ISA_KEYBOARD
397
398/************************************************************
399 * Video support
400 ************************************************************/
401#define CONFIG_VIDEO /*To enable video controller support */
402#define CONFIG_VIDEO_CT69000
403#define CONFIG_CFB_CONSOLE
404#define CONFIG_VIDEO_LOGO
405#define CONFIG_CONSOLE_EXTRA_INFO
406#define CONFIG_VGA_AS_SINGLE_DEVICE
407#define CONFIG_VIDEO_SW_CURSOR
408#undef CONFIG_VIDEO_ONBOARD
409/************************************************************
410 * USB support EXPERIMENTAL
411 ************************************************************/
wdenkf3e0de62003-06-04 15:05:30 +0000412#if !defined(CONFIG_MIP405T)
wdenk7d393ae2002-10-25 21:08:05 +0000413#define CONFIG_USB_UHCI
414#define CONFIG_USB_KEYBOARD
415#define CONFIG_USB_STORAGE
416
417/* Enable needed helper functions */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200418#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */
wdenkf3e0de62003-06-04 15:05:30 +0000419#endif
wdenk7d393ae2002-10-25 21:08:05 +0000420/************************************************************
421 * Debug support
422 ************************************************************/
Jon Loeliger8353e132007-07-08 14:14:17 -0500423#if defined(CONFIG_CMD_KGDB)
wdenk7d393ae2002-10-25 21:08:05 +0000424#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
425#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
426#endif
427
428/************************************************************
wdenka2663ea2003-12-07 18:32:37 +0000429 * support BZIP2 compression
430 ************************************************************/
431#define CONFIG_BZIP2 1
432
433/************************************************************
wdenk7d393ae2002-10-25 21:08:05 +0000434 * Ident
435 ************************************************************/
wdenkf3e0de62003-06-04 15:05:30 +0000436
wdenk7d393ae2002-10-25 21:08:05 +0000437#define VERSION_TAG "released"
wdenkf3e0de62003-06-04 15:05:30 +0000438#if !defined(CONFIG_MIP405T)
439#define CONFIG_ISO_STRING "MEV-10072-001"
440#else
441#define CONFIG_ISO_STRING "MEV-10082-001"
442#endif
443
444#if !defined(CONFIG_BOOT_PCI)
445#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
446#else
447#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version"
448#endif
wdenk7d393ae2002-10-25 21:08:05 +0000449
450
451#endif /* __CONFIG_H */