blob: 4f9f9fe0f1774949cd6213c92a4dca5311b8cc48 [file] [log] [blame]
wdenk04a85b32004-04-15 18:22:41 +00001/*
2 * (C) Copyright 2000-2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
26 * U-Boot port on NetTA4 board
27 */
28
29#ifndef __CONFIG_H
30#define __CONFIG_H
31
32/*
33 * High Level Configuration Options
34 * (easy to change)
35 */
36
37#define CONFIG_MPC885 1 /* This is a MPC885 CPU */
38#define CONFIG_NETTA 1 /* ...on a NetTA board */
39
40#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
41#undef CONFIG_8xx_CONS_SMC2
42#undef CONFIG_8xx_CONS_NONE
43
44#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
45
46/* #define CONFIG_XIN 10000000 */
47#define CONFIG_XIN 50000000
48#define MPC8XX_HZ 120000000
49/* #define MPC8XX_HZ 100000000 */
50/* #define MPC8XX_HZ 50000000 */
51/* #define MPC8XX_HZ 80000000 */
52
53#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
54
55#if 0
56#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
57#else
58#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
59#endif
60
61#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
62
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010063#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
wdenk04a85b32004-04-15 18:22:41 +000064
65#undef CONFIG_BOOTARGS
66#define CONFIG_BOOTCOMMAND \
Wolfgang Denk53677ef2008-05-20 16:00:29 +020067 "tftpboot; " \
wdenk79fa88f2004-06-07 23:46:25 +000068 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
69 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
wdenk04a85b32004-04-15 18:22:41 +000070 "bootm"
71
72#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020073#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
wdenk04a85b32004-04-15 18:22:41 +000074
75#undef CONFIG_WATCHDOG /* watchdog disabled */
76#define CONFIG_HW_WATCHDOG
77
78#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
79
Jon Loeliger7be044e2007-07-09 21:24:19 -050080/*
81 * BOOTP options
82 */
83#define CONFIG_BOOTP_SUBNETMASK
84#define CONFIG_BOOTP_GATEWAY
85#define CONFIG_BOOTP_HOSTNAME
86#define CONFIG_BOOTP_BOOTPATH
87#define CONFIG_BOOTP_BOOTFILESIZE
88#define CONFIG_BOOTP_NISDOMAIN
89
wdenk04a85b32004-04-15 18:22:41 +000090
91#undef CONFIG_MAC_PARTITION
92#undef CONFIG_DOS_PARTITION
93
94#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
95
Wolfgang Denk53677ef2008-05-20 16:00:29 +020096#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
wdenk04a85b32004-04-15 18:22:41 +000097#define FEC_ENET 1 /* eth.c needs it that way... */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020098#undef CONFIG_SYS_DISCOVER_PHY /* do not discover phys */
wdenk04a85b32004-04-15 18:22:41 +000099#define CONFIG_MII 1
TsiChung Liew0f3ba7e2008-03-30 01:22:13 -0500100#define CONFIG_MII_INIT 1
wdenk04a85b32004-04-15 18:22:41 +0000101#define CONFIG_RMII 1 /* use RMII interface */
102
103#if defined(CONFIG_NETTA_ISDN)
104#define CONFIG_ETHER_ON_FEC1 1
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200105#define CONFIG_FEC1_PHY 1 /* phy address of FEC1 */
wdenk04a85b32004-04-15 18:22:41 +0000106#define CONFIG_FEC1_PHY_NORXERR 1
107#undef CONFIG_ETHER_ON_FEC2
108#else
109#define CONFIG_ETHER_ON_FEC1 1
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200110#define CONFIG_FEC1_PHY 8 /* phy address of FEC1 */
wdenk04a85b32004-04-15 18:22:41 +0000111#define CONFIG_FEC1_PHY_NORXERR 1
112#define CONFIG_ETHER_ON_FEC2 1
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200113#define CONFIG_FEC2_PHY 1 /* phy address of FEC2 */
wdenk04a85b32004-04-15 18:22:41 +0000114#define CONFIG_FEC2_PHY_NORXERR 1
115#endif
116
117#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
118
119/* POST support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200120#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
121 CONFIG_SYS_POST_CODEC | \
122 CONFIG_SYS_POST_DSP )
wdenk04a85b32004-04-15 18:22:41 +0000123
Jon Loeligere18a1062007-07-08 14:21:43 -0500124
125/*
126 * Command line configuration.
127 */
128#include <config_cmd_default.h>
129
130#define CONFIG_CMD_CDP
131#define CONFIG_CMD_DHCP
132#define CONFIG_CMD_DIAG
133#define CONFIG_CMD_FAT
134#define CONFIG_CMD_IDE
135#define CONFIG_CMD_JFFS2
136#define CONFIG_CMD_MII
Jon Loeligere18a1062007-07-08 14:21:43 -0500137#define CONFIG_CMD_NFS
138#define CONFIG_CMD_PCMCIA
139#define CONFIG_CMD_PING
140
wdenk04a85b32004-04-15 18:22:41 +0000141
142#define CONFIG_BOARD_EARLY_INIT_F 1
143#define CONFIG_MISC_INIT_R
144
wdenk04a85b32004-04-15 18:22:41 +0000145/*
146 * Miscellaneous configurable options
147 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200148#define CONFIG_SYS_LONGHELP /* undef to save memory */
149#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
wdenk04a85b32004-04-15 18:22:41 +0000150
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200151#define CONFIG_SYS_HUSH_PARSER 1
152#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenk04a85b32004-04-15 18:22:41 +0000153
Jon Loeligere18a1062007-07-08 14:21:43 -0500154#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk04a85b32004-04-15 18:22:41 +0000156#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200157#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk04a85b32004-04-15 18:22:41 +0000158#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200159#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
160#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
161#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk04a85b32004-04-15 18:22:41 +0000162
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200163#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
164#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
wdenk04a85b32004-04-15 18:22:41 +0000165
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200166#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
wdenk04a85b32004-04-15 18:22:41 +0000167
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200168#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenk04a85b32004-04-15 18:22:41 +0000169
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200170#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenk04a85b32004-04-15 18:22:41 +0000171
172/*
173 * Low Level Configuration Settings
174 * (address mappings, register initial values, etc.)
175 * You should know what you are doing if you make changes here.
176 */
177/*-----------------------------------------------------------------------
178 * Internal Memory Mapped Register
179 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200180#define CONFIG_SYS_IMMR 0xFF000000
wdenk04a85b32004-04-15 18:22:41 +0000181
182/*-----------------------------------------------------------------------
183 * Definitions for initial stack pointer and data area (in DPRAM)
184 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200185#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
186#define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */
187#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
188#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
189#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenk04a85b32004-04-15 18:22:41 +0000190
191/*-----------------------------------------------------------------------
192 * Start addresses for the final memory configuration
193 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200194 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenk04a85b32004-04-15 18:22:41 +0000195 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200196#define CONFIG_SYS_SDRAM_BASE 0x00000000
197#define CONFIG_SYS_FLASH_BASE 0x40000000
wdenk04a85b32004-04-15 18:22:41 +0000198#if defined(DEBUG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
wdenk04a85b32004-04-15 18:22:41 +0000200#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200201#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
wdenk04a85b32004-04-15 18:22:41 +0000202#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200203#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
204#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
wdenk04a85b32004-04-15 18:22:41 +0000205
206/*
207 * For booting Linux, the board info and command line data
208 * have to be in the first 8 MB of memory, since this is
209 * the maximum mapped by the Linux kernel during initialization.
210 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200211#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenk04a85b32004-04-15 18:22:41 +0000212
213/*-----------------------------------------------------------------------
214 * FLASH organization
215 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
217#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
wdenk04a85b32004-04-15 18:22:41 +0000218
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200219#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
220#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenk04a85b32004-04-15 18:22:41 +0000221
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200222#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200223#define CONFIG_ENV_SECT_SIZE 0x10000
wdenk04a85b32004-04-15 18:22:41 +0000224
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200225#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200226#define CONFIG_ENV_OFFSET 0
227#define CONFIG_ENV_SIZE 0x4000
wdenk04a85b32004-04-15 18:22:41 +0000228
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200229#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200230#define CONFIG_ENV_OFFSET_REDUND 0
231#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
wdenk04a85b32004-04-15 18:22:41 +0000232
233/*-----------------------------------------------------------------------
234 * Cache Configuration
235 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200236#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeligere18a1062007-07-08 14:21:43 -0500237#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenk04a85b32004-04-15 18:22:41 +0000239#endif
240
241/*-----------------------------------------------------------------------
242 * SYPCR - System Protection Control 11-9
243 * SYPCR can only be written once after reset!
244 *-----------------------------------------------------------------------
245 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
246 */
247#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200248#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
wdenk04a85b32004-04-15 18:22:41 +0000249 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
250#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200251#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
wdenk04a85b32004-04-15 18:22:41 +0000252#endif
253
254/*-----------------------------------------------------------------------
255 * SIUMCR - SIU Module Configuration 11-6
256 *-----------------------------------------------------------------------
257 * PCMCIA config., multi-function pin tri-state
258 */
259#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200260#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
wdenk04a85b32004-04-15 18:22:41 +0000261#else /* we must activate GPL5 in the SIUMCR for CAN */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200262#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
wdenk04a85b32004-04-15 18:22:41 +0000263#endif /* CONFIG_CAN_DRIVER */
264
265/*-----------------------------------------------------------------------
266 * TBSCR - Time Base Status and Control 11-26
267 *-----------------------------------------------------------------------
268 * Clear Reference Interrupt Status, Timebase freezing enabled
269 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200270#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
wdenk04a85b32004-04-15 18:22:41 +0000271
272/*-----------------------------------------------------------------------
273 * RTCSC - Real-Time Clock Status and Control Register 11-27
274 *-----------------------------------------------------------------------
275 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200276#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
wdenk04a85b32004-04-15 18:22:41 +0000277
278/*-----------------------------------------------------------------------
279 * PISCR - Periodic Interrupt Status and Control 11-31
280 *-----------------------------------------------------------------------
281 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
282 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200283#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
wdenk04a85b32004-04-15 18:22:41 +0000284
285/*-----------------------------------------------------------------------
286 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
287 *-----------------------------------------------------------------------
288 * Reset PLL lock status sticky bit, timer expired status bit and timer
289 * interrupt status bit
290 *
291 */
292
293#if CONFIG_XIN == 10000000
294
295#if MPC8XX_HZ == 120000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200296#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000297 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200298 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000299#elif MPC8XX_HZ == 100000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200300#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000301 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200302 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000303#elif MPC8XX_HZ == 50000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200304#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000305 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200306 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000307#elif MPC8XX_HZ == 25000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200308#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000309 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200310 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000311#elif MPC8XX_HZ == 40000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200312#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000313 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200314 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000315#elif MPC8XX_HZ == 75000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200316#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000317 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200318 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000319#else
320#error unsupported CPU freq for XIN = 10MHz
321#endif
322
323#elif CONFIG_XIN == 50000000
324
325#if MPC8XX_HZ == 120000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200326#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000327 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200328 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000329#elif MPC8XX_HZ == 100000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200330#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000331 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200332 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000333#elif MPC8XX_HZ == 80000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200334#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000335 (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200336 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000337#elif MPC8XX_HZ == 50000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200338#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
wdenk04a85b32004-04-15 18:22:41 +0000339 (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200340 PLPRCR_TEXPS)
wdenk04a85b32004-04-15 18:22:41 +0000341#else
342#error unsupported CPU freq for XIN = 50MHz
343#endif
344
345#else
346
347#error unsupported XIN freq
348#endif
349
350
351/*
352 *-----------------------------------------------------------------------
353 * SCCR - System Clock and reset Control Register 15-27
354 *-----------------------------------------------------------------------
355 * Set clock output, timebase and RTC source and divider,
356 * power management and some other internal clocks
wdenk79fa88f2004-06-07 23:46:25 +0000357 *
358 * Note: When TBS == 0 the timebase is independent of current cpu clock.
wdenk04a85b32004-04-15 18:22:41 +0000359 */
360
361#define SCCR_MASK SCCR_EBDF11
362#if MPC8XX_HZ > 66666666
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200363#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
wdenk04a85b32004-04-15 18:22:41 +0000364 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenk79fa88f2004-06-07 23:46:25 +0000365 SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \
wdenk04a85b32004-04-15 18:22:41 +0000366 SCCR_DFALCD00 | SCCR_EBDF01)
367#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200368#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
wdenk04a85b32004-04-15 18:22:41 +0000369 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenk79fa88f2004-06-07 23:46:25 +0000370 SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \
wdenk04a85b32004-04-15 18:22:41 +0000371 SCCR_DFALCD00)
372#endif
373
374/*-----------------------------------------------------------------------
375 *
376 *-----------------------------------------------------------------------
377 *
378 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200379/*#define CONFIG_SYS_DER 0x2002000F*/
380#define CONFIG_SYS_DER 0
wdenk04a85b32004-04-15 18:22:41 +0000381
382/*
383 * Init Memory Controller:
384 *
385 * BR0/1 and OR0/1 (FLASH)
386 */
387
388#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
389
390/* used to re-map FLASH both when starting from SRAM or FLASH:
391 * restrict access enough to keep SRAM working (if any)
392 * but not too much to meddle with FLASH accesses
393 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200394#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
395#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
wdenk04a85b32004-04-15 18:22:41 +0000396
397/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200398#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
wdenk04a85b32004-04-15 18:22:41 +0000399
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200400#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
401#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
402#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
wdenk04a85b32004-04-15 18:22:41 +0000403
404/*
405 * BR3 and OR3 (SDRAM)
406 *
407 */
408#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
409#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
410
411/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200412#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
wdenk04a85b32004-04-15 18:22:41 +0000413
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200414#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
415#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
wdenk04a85b32004-04-15 18:22:41 +0000416
417/*
418 * Memory Periodic Timer Prescaler
419 */
420
421/*
422 * Memory Periodic Timer Prescaler
423 *
424 * The Divider for PTA (refresh timer) configuration is based on an
425 * example SDRAM configuration (64 MBit, one bank). The adjustment to
426 * the number of chip selects (NCS) and the actually needed refresh
427 * rate is done by setting MPTPR.
428 *
429 * PTA is calculated from
430 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
431 *
432 * gclk CPU clock (not bus clock!)
433 * Trefresh Refresh cycle * 4 (four word bursts used)
434 *
435 * 4096 Rows from SDRAM example configuration
436 * 1000 factor s -> ms
437 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
438 * 4 Number of refresh cycles per period
439 * 64 Refresh cycle in ms per number of rows
440 * --------------------------------------------
441 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
442 *
443 * 50 MHz => 50.000.000 / Divider = 98
444 * 66 Mhz => 66.000.000 / Divider = 129
445 * 80 Mhz => 80.000.000 / Divider = 156
446 */
447
448#if MPC8XX_HZ == 120000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200449#define CONFIG_SYS_MAMR_PTA 234
wdenk04a85b32004-04-15 18:22:41 +0000450#elif MPC8XX_HZ == 100000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200451#define CONFIG_SYS_MAMR_PTA 195
wdenk04a85b32004-04-15 18:22:41 +0000452#elif MPC8XX_HZ == 80000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200453#define CONFIG_SYS_MAMR_PTA 156
wdenk04a85b32004-04-15 18:22:41 +0000454#elif MPC8XX_HZ == 50000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200455#define CONFIG_SYS_MAMR_PTA 98
wdenk04a85b32004-04-15 18:22:41 +0000456#else
457#error Unknown frequency
458#endif
459
460
461/*
462 * For 16 MBit, refresh rates could be 31.3 us
463 * (= 64 ms / 2K = 125 / quad bursts).
464 * For a simpler initialization, 15.6 us is used instead.
465 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200466 * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
467 * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
wdenk04a85b32004-04-15 18:22:41 +0000468 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200469#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
470#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
wdenk04a85b32004-04-15 18:22:41 +0000471
472/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200473#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
474#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
wdenk04a85b32004-04-15 18:22:41 +0000475
476/*
477 * MAMR settings for SDRAM
478 */
479
480/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200481#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenk04a85b32004-04-15 18:22:41 +0000482 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
483 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
484
485/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200486#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenk04a85b32004-04-15 18:22:41 +0000487 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
488 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
489
490/*
491 * Internal Definitions
492 *
493 * Boot Flags
494 */
495#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
496#define BOOTFLAG_WARM 0x02 /* Software reboot */
497
wdenk04a85b32004-04-15 18:22:41 +0000498#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
499
500/***********************************************************************************************************
501
502 Pin definitions:
503
504 +------+----------------+--------+------------------------------------------------------------
505 | # | Name | Type | Comment
506 +------+----------------+--------+------------------------------------------------------------
507 | PA3 | OK_ETH_3V | Input | CISCO Ethernet power OK
508 | | | | (NetRoute: FEC1, TA: FEC2) (0=power OK)
509 | PA6 | P_VCCD1 | Output | TPS2211A PCMCIA
510 | PA7 | DCL1_3V | Periph | IDL1 PCM clock
511 | PA8 | DSP_DR1 | Periph | IDL1 PCM Data Rx
512 | PA9 | L1TXDA | Periph | IDL1 PCM Data Tx
513 | PA10 | P_VCCD0 | Output | TPS2211A PCMCIA
514 | PA12 | P_SHDN | Output | TPS2211A PCMCIA
515 | PA13 | ETH_LOOP | Output | CISCO Loopback remote power
516 | | | | (NetRoute: FEC1, TA: FEC2) (1=NORMAL)
517 | PA14 | P_VPPD0 | Output | TPS2211A PCMCIA
518 | PA15 | P_VPPD1 | Output | TPS2211A PCMCIA
519 | PB14 | SPIEN_FXO | Output | SPI CS for FXO daughter-board
520 | PB15 | SPIEN_S1 | Output | SPI CS for S-interface 1 (NetRoute only)
521 | PB16 | DREQ1 | Output | D channel request for S-interface chip 1.
522 | PB17 | L1ST3 | Periph | IDL1 timeslot enable signal for PPC
523 | PB18 | L1ST2 | Periph | IDL1 timeslot enable signal for PPC
524 | PB19 | SPIEN_S2 | Output | SPI CS for S-interface 2 (NetRoute only)
525 | PB20 | SPIEN_SEEPROM | Output | SPI CS for serial eeprom
526 | PB21 | LEDIO | Output | Led mode indication for PHY
527 | PB22 | UART_CTS | Input | UART CTS
528 | PB23 | UART_RTS | Output | UART RTS
529 | PB24 | UART_RX | Periph | UART Data Rx
530 | PB25 | UART_TX | Periph | UART Data Tx
531 | PB26 | RMII-MDC | Periph | Free for future use (MII mgt clock)
532 | PB27 | RMII-MDIO | Periph | Free for future use (MII mgt data)
533 | PB28 | SPI_RXD_3V | Input | SPI Data Rx
534 | PB29 | SPI_TXD | Output | SPI Data Tx
535 | PB30 | SPI_CLK | Output | SPI Clock
536 | PB31 | RMII1-REFCLK | Periph | RMII reference clock for FEC1
537 | PC4 | PHY1_LINK | Input | PHY link state FEC1 (interrupt)
538 | PC5 | PHY2_LINK | Input | PHY link state FEC2 (interrupt)
539 | PC6 | RMII1-MDINT | Input | PHY prog interrupt FEC1 (interrupt)
540 | PC7 | RMII2-MDINT | Input | PHY prog interrupt FEC1 (interrupt)
541 | PC8 | P_OC | Input | TPS2211A PCMCIA overcurrent (interrupt) (1=OK)
542 | PC9 | COM_HOOK1 | Input | Codec interrupt chip #1 (interrupt)
543 | PC10 | COM_HOOK2 | Input | Codec interrupt chip #2 (interrupt)
544 | PC11 | COM_HOOK4 | Input | Codec interrupt chip #4 (interrupt)
545 | PC12 | COM_HOOK3 | Input | Codec interrupt chip #3 (interrupt)
546 | PC13 | F_RY_BY | Input | NAND ready signal (interrupt)
547 | PC14 | FAN_OK | Input | Fan status signal (interrupt) (1=OK)
548 | PC15 | PC15_DIRECT0 | Periph | PCMCIA DMA request.
549 | PD3 | F_ALE | Output | NAND
550 | PD4 | F_CLE | Output | NAND
551 | PD5 | F_CE | Output | NAND
552 | PD6 | DSP_INT | Output | DSP debug interrupt
553 | PD7 | DSP_RESET | Output | DSP reset
554 | PD8 | RMII_MDC | Periph | MII mgt clock
555 | PD9 | SPIEN_C1 | Output | SPI CS for codec #1
556 | PD10 | SPIEN_C2 | Output | SPI CS for codec #2
557 | PD11 | SPIEN_C3 | Output | SPI CS for codec #3
558 | PD12 | FSC2 | Periph | IDL2 frame sync
559 | PD13 | DGRANT2 | Input | D channel grant from S #2
560 | PD14 | SPIEN_C4 | Output | SPI CS for codec #4
561 | PD15 | TP700 | Output | Testpoint for software debugging
562 | PE14 | RMII2-TXD0 | Periph | FEC2 transmit data
563 | PE15 | RMII2-TXD1 | Periph | FEC2 transmit data
564 | PE16 | RMII2-REFCLK | Periph | TA: RMII ref clock for
565 | | DCL2 | Periph | NetRoute: PCM clock #2
566 | PE17 | TP703 | Output | Testpoint for software debugging
567 | PE18 | DGRANT1 | Input | D channel grant from S #1
568 | PE19 | RMII2-TXEN | Periph | TA: FEC2 tx enable
569 | | PCM2OUT | Periph | NetRoute: Tx data for IDL2
570 | PE20 | FSC1 | Periph | IDL1 frame sync
571 | PE21 | RMII2-RXD0 | Periph | FEC2 receive data
572 | PE22 | RMII2-RXD1 | Periph | FEC2 receive data
573 | PE23 | L1ST1 | Periph | IDL1 timeslot enable signal for PPC
574 | PE24 | U-N1 | Output | Select user/network for S #1 (0=user)
575 | PE25 | U-N2 | Output | Select user/network for S #2 (0=user)
576 | PE26 | RMII2-RXDV | Periph | FEC2 valid
577 | PE27 | DREQ2 | Output | D channel request for S #2.
578 | PE28 | FPGA_DONE | Input | FPGA done signal
579 | PE29 | FPGA_INIT | Output | FPGA init signal
580 | PE30 | UDOUT2_3V | Input | IDL2 PCM input
581 | PE31 | | | Free
582 +------+----------------+--------+---------------------------------------------------
583
584 Chip selects:
585
586 +------+----------------+------------------------------------------------------------
587 | # | Name | Comment
588 +------+----------------+------------------------------------------------------------
589 | CS0 | CS0 | Boot flash
590 | CS1 | CS_FLASH | NAND flash
591 | CS2 | CS_DSP | DSP
592 | CS3 | DCS_DRAM | DRAM
593 | CS4 | CS_ER1 | External output register
594 +------+----------------+------------------------------------------------------------
595
596 Interrupts:
597
598 +------+----------------+------------------------------------------------------------
599 | # | Name | Comment
600 +------+----------------+------------------------------------------------------------
601 | IRQ1 | UINTER_3V | S interupt chips interrupt (common)
602 | IRQ3 | IRQ_DSP | DSP interrupt
603 | IRQ4 | IRQ_DSP1 | Extra DSP interrupt
604 +------+----------------+------------------------------------------------------------
605
606*************************************************************************************************/
607
608#define DSP_SIZE 0x00010000 /* 64K */
609#define NAND_SIZE 0x00010000 /* 64K */
610#define ER_SIZE 0x00010000 /* 64K */
611#define DUMMY_SIZE 0x00010000 /* 64K */
612
613#define DSP_BASE 0xF1000000
614#define NAND_BASE 0xF1010000
615#define ER_BASE 0xF1020000
616#define DUMMY_BASE 0xF1FF0000
617
wdenk79fa88f2004-06-07 23:46:25 +0000618/*****************************************************************************/
619
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200620#define CONFIG_SYS_DIRECT_FLASH_TFTP
621#define CONFIG_SYS_DIRECT_NAND_TFTP
wdenk79fa88f2004-06-07 23:46:25 +0000622
wdenk04a85b32004-04-15 18:22:41 +0000623/*****************************************************************************/
624
625#if 1
626/*-----------------------------------------------------------------------
627 * PCMCIA stuff
628 *-----------------------------------------------------------------------
629 */
630
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200631#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
632#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
633#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
634#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
635#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
636#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
637#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
638#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
wdenk04a85b32004-04-15 18:22:41 +0000639
640/*-----------------------------------------------------------------------
641 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
642 *-----------------------------------------------------------------------
643 */
644
645#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
646
647#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
648#undef CONFIG_IDE_LED /* LED for ide not supported */
649#undef CONFIG_IDE_RESET /* reset for ide not supported */
650
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200651#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
652#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
wdenk04a85b32004-04-15 18:22:41 +0000653
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200654#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
wdenk04a85b32004-04-15 18:22:41 +0000655
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200656#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
wdenk04a85b32004-04-15 18:22:41 +0000657
658/* Offset for data I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200659#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenk04a85b32004-04-15 18:22:41 +0000660
661/* Offset for normal register accesses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200662#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
wdenk04a85b32004-04-15 18:22:41 +0000663
664/* Offset for alternate registers */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200665#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
wdenk04a85b32004-04-15 18:22:41 +0000666
667#define CONFIG_MAC_PARTITION
668#define CONFIG_DOS_PARTITION
669#endif
670
671/*************************************************************************************************/
672
673#define CONFIG_CDP_DEVICE_ID 20
674#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta */
675#define CONFIG_CDP_PORT_ID "eth%d"
676#define CONFIG_CDP_CAPABILITIES 0x00000010
Peter Tyser561858e2008-11-03 09:30:59 -0600677#define CONFIG_CDP_VERSION "u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME
wdenk04a85b32004-04-15 18:22:41 +0000678#define CONFIG_CDP_PLATFORM "Intracom NetTA"
679#define CONFIG_CDP_TRIGGER 0x20020001
680#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
681#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone? */
682
683/*************************************************************************************************/
684
685#define CONFIG_AUTO_COMPLETE 1
686
687/*************************************************************************************************/
688
wdenkc26e4542004-04-18 10:13:26 +0000689#define CONFIG_CRC32_VERIFY 1
690
691/*************************************************************************************************/
692
693#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
694
695/*************************************************************************************************/
696
wdenk04a85b32004-04-15 18:22:41 +0000697#endif /* __CONFIG_H */