blob: 0bb6731a26270ba98cb32295489021f9b897d90f [file] [log] [blame]
Stefan Roeseb29ca4a2013-04-17 00:32:43 +00001/*
2 * Copyright (C) 2013 Stefan Roese <sr@denx.de>
3 *
4 * Configuration settings for the ProjectionDesign / Barco
5 * Titanium board.
6 *
7 * Based on mx6qsabrelite.h which is:
8 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000011 */
12
13#ifndef __CONFIG_H
14#define __CONFIG_H
15
16#include <asm/arch/imx-regs.h>
17#include <asm/imx-common/gpio.h>
18
19#define CONFIG_MX6
20#define CONFIG_MX6Q
21#define CONFIG_DISPLAY_CPUINFO
22#define CONFIG_DISPLAY_BOARDINFO
23
24#define MACH_TYPE_TITANIUM 3769
25#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM
26
27#define CONFIG_CMDLINE_TAG
28#define CONFIG_SETUP_MEMORY_TAGS
29#define CONFIG_INITRD_TAG
30#define CONFIG_REVISION_TAG
31
32/* Size of malloc() pool */
33#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
34
35#define CONFIG_BOARD_EARLY_INIT_F
36#define CONFIG_MISC_INIT_R
37#define CONFIG_MXC_GPIO
38
39#define CONFIG_MXC_UART
40#define CONFIG_MXC_UART_BASE UART1_BASE
41
42/* I2C Configs */
43#define CONFIG_CMD_I2C
tremb089d032013-09-21 18:13:36 +020044#define CONFIG_SYS_I2C
45#define CONFIG_SYS_I2C_MXC
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000046#define CONFIG_SYS_I2C_SPEED 100000
47
48/* MMC Configs */
49#define CONFIG_FSL_ESDHC
50#define CONFIG_FSL_USDHC
51#define CONFIG_SYS_FSL_ESDHC_ADDR 0
52#define CONFIG_SYS_FSL_USDHC_NUM 1
53
54#define CONFIG_MMC
55#define CONFIG_CMD_MMC
56#define CONFIG_GENERIC_MMC
57#define CONFIG_BOUNCE_BUFFER
58#define CONFIG_CMD_EXT2
59#define CONFIG_CMD_FAT
60#define CONFIG_DOS_PARTITION
61
62#define CONFIG_CMD_PING
63#define CONFIG_CMD_DHCP
64#define CONFIG_CMD_MII
65#define CONFIG_CMD_NET
66#define CONFIG_FEC_MXC
67#define CONFIG_MII
68#define IMX_FEC_BASE ENET_BASE_ADDR
69#define CONFIG_FEC_XCV_TYPE RGMII
70#define CONFIG_FEC_MXC_PHYADDR 4
71#define CONFIG_PHYLIB
72#define CONFIG_PHY_MICREL
73#define CONFIG_PHY_MICREL_KSZ9021
74
75/* USB Configs */
76#define CONFIG_CMD_USB
77#define CONFIG_CMD_FAT
78#define CONFIG_USB_EHCI
79#define CONFIG_USB_EHCI_MX6
80#define CONFIG_USB_STORAGE
81#define CONFIG_MXC_USB_PORT 1
82#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
83#define CONFIG_MXC_USB_FLAGS 0
84
85/* Miscellaneous commands */
86#define CONFIG_CMD_BMODE
87
88/* allow to overwrite serial and ethaddr */
89#define CONFIG_ENV_OVERWRITE
90#define CONFIG_CONS_INDEX 1
91#define CONFIG_BAUDRATE 115200
92
93/* Command definition */
94#include <config_cmd_default.h>
95
96#undef CONFIG_CMD_IMLS
97
98#define CONFIG_BOOTDELAY 3
99
100#define CONFIG_LOADADDR 0x12000000
101#define CONFIG_SYS_TEXT_BASE 0x17800000
102
103#define CONFIG_SYS_MEMTEST_START 0x10000000
104#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))
105
106#define CONFIG_HOSTNAME titanium
107#define CONFIG_UBI_PART ubi
108#define CONFIG_UBIFS_VOLUME rootfs0
109
110#define MTDIDS_DEFAULT "nand0=gpmi-nand"
111#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
112 "512k(env2),-(ubi)"
113
114#define CONFIG_EXTRA_ENV_SETTINGS \
115 "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
116 "kernel_fs=/boot/uImage\0" \
117 "kernel_addr=11000000\0" \
118 "dtb=" __stringify(CONFIG_HOSTNAME) "/" \
119 __stringify(CONFIG_HOSTNAME) ".dtb\0" \
120 "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
121 "dtb_addr=12800000\0" \
122 "script=boot.scr\0" \
123 "uimage=uImage\0" \
124 "console=ttymxc0\0" \
125 "baudrate=115200\0" \
126 "fdt_high=0xffffffff\0" \
127 "initrd_high=0xffffffff\0" \
128 "mmcdev=0\0" \
129 "mmcpart=1\0" \
130 "uimage=uImage\0" \
131 "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
132 " ${script}\0" \
133 "bootscript=echo Running bootscript from mmc ...; source\0" \
134 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
135 "mmcroot=/dev/mmcblk0p2\0" \
136 "mmcargs=setenv bootargs console=${console},${baudrate} " \
137 "root=${mmcroot} rootwait rw\0" \
138 "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
139 " ${uimage}; bootm\0" \
140 "addip=setenv bootargs ${bootargs} " \
141 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
142 ":${hostname}:${netdev}:off panic=1\0" \
143 "addcon=setenv bootargs ${bootargs} console=ttymxc0," \
144 "${baudrate}\0" \
145 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
146 "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
147 "nfsargs=setenv bootargs root=/dev/nfs rw " \
148 "nfsroot=${serverip}:${rootpath}\0" \
149 "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
150 "part=" __stringify(CONFIG_UBI_PART) "\0" \
151 "boot_vol=0\0" \
152 "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
153 "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
154 "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
155 " ${filesize}\0" \
156 "upd_ubifs=run load_ubifs update_ubifs\0" \
157 "init_ubi=nand erase.part ubi;ubi part ${part};" \
158 "ubi create ${vol} c800000\0" \
159 "mtdids=" MTDIDS_DEFAULT "\0" \
160 "mtdparts=" MTDPARTS_DEFAULT "\0" \
161 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
162 " addcon addmtd;" \
163 "bootm ${kernel_addr} - ${dtb_addr}\0" \
164 "ubifsargs=set bootargs ubi.mtd=ubi " \
165 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \
166 "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \
167 "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
168 "ubifsload ${dtb_addr} ${dtb_fs};\0" \
169 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
170 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \
171 "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
172 "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
173 "net_nfs=run load_dtb load_kernel; " \
174 "run nfsargs addip addcon addmtd;" \
175 "bootm ${kernel_addr} - ${dtb_addr}\0" \
176 "delenv=env default -a -f; saveenv; reset\0"
177
178#define CONFIG_BOOTCOMMAND "run nand_ubifs"
179
180/* Miscellaneous configurable options */
181#define CONFIG_SYS_LONGHELP
182#define CONFIG_SYS_HUSH_PARSER
183#define CONFIG_SYS_PROMPT "Titanium > "
184#define CONFIG_AUTO_COMPLETE
185#define CONFIG_CMDLINE_EDITING
186#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
187
188#define CONFIG_SYS_CBSIZE 256
189
190/* Print Buffer Size */
191#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
192 sizeof(CONFIG_SYS_PROMPT) + 16)
193#define CONFIG_SYS_MAXARGS 16
194#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
195
196#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000197
198/* Physical Memory Map */
199#define CONFIG_NR_DRAM_BANKS 1
200#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
201#define PHYS_SDRAM_SIZE (512 << 20)
202
203#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
204#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
205#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
206
207#define CONFIG_SYS_INIT_SP_OFFSET \
208 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
209#define CONFIG_SYS_INIT_SP_ADDR \
210 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
211
212/* FLASH and environment organization */
213#define CONFIG_SYS_NO_FLASH
214
215/* Enable NAND support */
216#define CONFIG_CMD_NAND
217#define CONFIG_CMD_NAND_TRIMFFS
218#define CONFIG_CMD_TIME
219
220#ifdef CONFIG_CMD_NAND
221
222/* NAND stuff */
223#define CONFIG_NAND_MXS
224#define CONFIG_SYS_MAX_NAND_DEVICE 1
225#define CONFIG_SYS_NAND_BASE 0x40000000
226#define CONFIG_SYS_NAND_5_ADDR_CYCLE
227#define CONFIG_SYS_NAND_ONFI_DETECTION
228
229/* DMA stuff, needed for GPMI/MXS NAND support */
230#define CONFIG_APBH_DMA
231#define CONFIG_APBH_DMA_BURST
232#define CONFIG_APBH_DMA_BURST8
233
234/* Environment in NAND */
235#define CONFIG_ENV_IS_IN_NAND
236#define CONFIG_ENV_OFFSET (16 << 20)
237#define CONFIG_ENV_SECT_SIZE (128 << 10)
238#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
239#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
240#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
241
242#else /* CONFIG_CMD_NAND */
243
244/* Environment in MMC */
245#define CONFIG_ENV_SIZE (8 << 10)
246#define CONFIG_ENV_IS_IN_MMC
247#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
248#define CONFIG_SYS_MMC_ENV_DEV 0
249
250#endif /* CONFIG_CMD_NAND */
251
252/* UBI/UBIFS config options */
253#define CONFIG_LZO
254#define CONFIG_MTD_DEVICE
255#define CONFIG_MTD_PARTITIONS
256#define CONFIG_RBTREE
257#define CONFIG_CMD_MTDPARTS
258#define CONFIG_CMD_UBI
259#define CONFIG_CMD_UBIFS
260
261#define CONFIG_OF_LIBFDT
262#define CONFIG_CMD_BOOTZ
263
264#ifndef CONFIG_SYS_DCACHE_OFF
265#define CONFIG_CMD_CACHE
266#endif
267
268#endif /* __CONFIG_H */