| Adam Ford | cac4d6a | 2017-04-17 08:09:39 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Device Tree Source for OMAP3 SoC |
| 3 | * |
| 4 | * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ |
| 5 | * |
| 6 | * This file is licensed under the terms of the GNU General Public License |
| 7 | * version 2. This program is licensed "as is" without any warranty of any |
| 8 | * kind, whether express or implied. |
| 9 | */ |
| 10 | |
| 11 | #include <dt-bindings/media/omap3-isp.h> |
| 12 | |
| 13 | #include "omap3.dtsi" |
| 14 | |
| 15 | / { |
| 16 | aliases { |
| 17 | serial3 = &uart4; |
| 18 | }; |
| 19 | |
| 20 | cpus { |
| 21 | /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ |
| 22 | cpu@0 { |
| 23 | operating-points = < |
| 24 | /* kHz uV */ |
| 25 | 300000 1012500 |
| 26 | 600000 1200000 |
| 27 | 800000 1325000 |
| 28 | >; |
| 29 | clock-latency = <300000>; /* From legacy driver */ |
| 30 | }; |
| 31 | }; |
| 32 | |
| 33 | ocp@68000000 { |
| 34 | uart4: serial@49042000 { |
| 35 | compatible = "ti,omap3-uart"; |
| 36 | reg = <0x49042000 0x400>; |
| 37 | interrupts = <80>; |
| 38 | dmas = <&sdma 81 &sdma 82>; |
| 39 | dma-names = "tx", "rx"; |
| 40 | ti,hwmods = "uart4"; |
| 41 | clock-frequency = <48000000>; |
| 42 | }; |
| 43 | |
| 44 | abb_mpu_iva: regulator-abb-mpu { |
| 45 | compatible = "ti,abb-v1"; |
| 46 | regulator-name = "abb_mpu_iva"; |
| 47 | #address-cells = <0>; |
| 48 | #size-cells = <0>; |
| 49 | reg = <0x483072f0 0x8>, <0x48306818 0x4>; |
| 50 | reg-names = "base-address", "int-address"; |
| 51 | ti,tranxdone-status-mask = <0x4000000>; |
| 52 | clocks = <&sys_ck>; |
| 53 | ti,settling-time = <30>; |
| 54 | ti,clock-cycles = <8>; |
| 55 | ti,abb_info = < |
| 56 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 57 | 1012500 0 0 0 0 0 |
| 58 | 1200000 0 0 0 0 0 |
| 59 | 1325000 0 0 0 0 0 |
| 60 | 1375000 1 0 0 0 0 |
| 61 | >; |
| 62 | }; |
| 63 | |
| 64 | omap3_pmx_core2: pinmux@480025a0 { |
| 65 | compatible = "ti,omap3-padconf", "pinctrl-single"; |
| 66 | reg = <0x480025a0 0x5c>; |
| 67 | #address-cells = <1>; |
| 68 | #size-cells = <0>; |
| 69 | #interrupt-cells = <1>; |
| 70 | interrupt-controller; |
| 71 | pinctrl-single,register-width = <16>; |
| 72 | pinctrl-single,function-mask = <0xff1f>; |
| 73 | }; |
| 74 | |
| 75 | isp: isp@480bc000 { |
| 76 | compatible = "ti,omap3-isp"; |
| 77 | reg = <0x480bc000 0x12fc |
| 78 | 0x480bd800 0x0600>; |
| 79 | interrupts = <24>; |
| 80 | iommus = <&mmu_isp>; |
| 81 | syscon = <&scm_conf 0x2f0>; |
| 82 | ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>; |
| 83 | #clock-cells = <1>; |
| 84 | ports { |
| 85 | #address-cells = <1>; |
| 86 | #size-cells = <0>; |
| 87 | }; |
| 88 | }; |
| 89 | |
| 90 | bandgap@48002524 { |
| 91 | reg = <0x48002524 0x4>; |
| 92 | compatible = "ti,omap36xx-bandgap"; |
| 93 | #thermal-sensor-cells = <0>; |
| 94 | }; |
| 95 | }; |
| 96 | }; |
| 97 | |
| 98 | /* OMAP3630 needs dss_96m_fck for VENC */ |
| 99 | &venc { |
| 100 | clocks = <&dss_tv_fck>, <&dss_96m_fck>; |
| 101 | clock-names = "fck", "tv_dac_clk"; |
| 102 | }; |
| 103 | |
| 104 | &ssi { |
| 105 | status = "ok"; |
| 106 | |
| 107 | clocks = <&ssi_ssr_fck>, |
| 108 | <&ssi_sst_fck>, |
| 109 | <&ssi_ick>; |
| 110 | clock-names = "ssi_ssr_fck", |
| 111 | "ssi_sst_fck", |
| 112 | "ssi_ick"; |
| 113 | }; |
| 114 | |
| 115 | /include/ "omap34xx-omap36xx-clocks.dtsi" |
| 116 | /include/ "omap36xx-omap3430es2plus-clocks.dtsi" |
| 117 | /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" |
| 118 | /include/ "omap36xx-clocks.dtsi" |