Simon Glass | cbdfe59 | 2019-02-16 20:25:04 -0700 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Intel Broadwell I2S driver |
| 4 | * |
| 5 | * Copyright 2019 Google LLC |
| 6 | * |
| 7 | * Modified from dc i2s/broadwell/broadwell.c |
| 8 | */ |
| 9 | |
| 10 | #define LOG_CATEGORY UCLASS_I2S |
| 11 | |
| 12 | #include <common.h> |
| 13 | #include <dm.h> |
| 14 | #include <i2s.h> |
| 15 | #include <asm/io.h> |
| 16 | #include "broadwell_i2s.h" |
| 17 | |
| 18 | enum { |
| 19 | BDW_SHIM_START_ADDRESS = 0xfb000, |
| 20 | BDW_SSP0_START_ADDRESS = 0xfc000, |
| 21 | BDW_SSP1_START_ADDRESS = 0xfd000, |
| 22 | }; |
| 23 | |
| 24 | struct broadwell_i2s_priv { |
| 25 | enum frame_sync_rel_timing_t rel_timing; |
| 26 | enum frame_sync_pol_t sfrm_polarity; |
| 27 | enum end_transfer_state_t end_transfer_state; |
| 28 | enum clock_mode_t sclk_mode; |
| 29 | uint sclk_dummy_stop; /* 0-31 */ |
| 30 | uint sclk_frame_width; /* 1-38 */ |
| 31 | struct i2s_shim_regs *shim; |
| 32 | struct broadwell_i2s_regs *regs; |
| 33 | }; |
| 34 | |
| 35 | static void init_shim_csr(struct broadwell_i2s_priv *priv) |
| 36 | { |
| 37 | /* |
| 38 | * Select SSP clock |
| 39 | * Turn off low power clock |
| 40 | * Set PIO mode |
| 41 | * Stall DSP core |
| 42 | */ |
| 43 | clrsetbits_le32(&priv->shim->csr, |
| 44 | SHIM_CS_S0IOCS | SHIM_CS_LPCS | SHIM_CS_DCS_MASK, |
| 45 | SHIM_CS_S1IOCS | SHIM_CS_SBCS_SSP1_24MHZ | |
| 46 | SHIM_CS_SBCS_SSP0_24MHZ | SHIM_CS_SDPM_PIO_SSP1 | |
| 47 | SHIM_CS_SDPM_PIO_SSP0 | SHIM_CS_STALL | |
| 48 | SHIM_CS_DCS_DSP32_AF32); |
| 49 | } |
| 50 | |
| 51 | static void init_shim_clkctl(struct i2s_uc_priv *uc_priv, |
| 52 | struct broadwell_i2s_priv *priv) |
| 53 | { |
| 54 | u32 clkctl = readl(&priv->shim->clkctl); |
| 55 | |
| 56 | /* Set 24Mhz mclk, prevent local clock gating, enable SSP0 clock */ |
| 57 | clkctl &= SHIM_CLKCTL_RESERVED; |
| 58 | clkctl |= SHIM_CLKCTL_MCLK_24MHZ | SHIM_CLKCTL_DCPLCG; |
| 59 | |
| 60 | /* Enable requested SSP interface */ |
| 61 | if (uc_priv->id) |
| 62 | clkctl |= SHIM_CLKCTL_SCOE_SSP1 | SHIM_CLKCTL_SFLCGB_SSP1_CGD; |
| 63 | else |
| 64 | clkctl |= SHIM_CLKCTL_SCOE_SSP0 | SHIM_CLKCTL_SFLCGB_SSP0_CGD; |
| 65 | |
| 66 | writel(clkctl, &priv->shim->clkctl); |
| 67 | } |
| 68 | |
| 69 | static void init_sscr0(struct i2s_uc_priv *uc_priv, |
| 70 | struct broadwell_i2s_priv *priv) |
| 71 | { |
| 72 | u32 sscr0; |
| 73 | uint scale; |
| 74 | |
| 75 | /* Set data size based on BPS */ |
| 76 | if (uc_priv->bitspersample > 16) |
| 77 | sscr0 = (uc_priv->bitspersample - 16 - 1) << SSP_SSC0_DSS_SHIFT |
| 78 | | SSP_SSC0_EDSS; |
| 79 | else |
| 80 | sscr0 = (uc_priv->bitspersample - 1) << SSP_SSC0_DSS_SHIFT; |
| 81 | |
| 82 | /* Set network mode, Stereo PSP frame format */ |
| 83 | sscr0 |= SSP_SSC0_MODE_NETWORK | |
| 84 | SSP_SSC0_FRDC_STEREO | |
| 85 | SSP_SSC0_FRF_PSP | |
| 86 | SSP_SSC0_TIM | |
| 87 | SSP_SSC0_RIM | |
| 88 | SSP_SSC0_ECS_PCH | |
| 89 | SSP_SSC0_NCS_PCH | |
| 90 | SSP_SSC0_ACS_PCH; |
| 91 | |
| 92 | /* Scale 24MHz MCLK */ |
| 93 | scale = uc_priv->audio_pll_clk / uc_priv->samplingrate / uc_priv->bfs; |
| 94 | sscr0 |= scale << SSP_SSC0_SCR_SHIFT; |
| 95 | |
| 96 | writel(sscr0, &priv->regs->sscr0); |
| 97 | } |
| 98 | |
| 99 | static void init_sscr1(struct broadwell_i2s_priv *priv) |
| 100 | { |
| 101 | u32 sscr1 = readl(&priv->regs->sscr1); |
| 102 | |
| 103 | sscr1 &= SSP_SSC1_RESERVED; |
| 104 | |
| 105 | /* Set as I2S master */ |
| 106 | sscr1 |= SSP_SSC1_SCLKDIR_MASTER | SSP_SSC1_SCLKDIR_MASTER; |
| 107 | |
| 108 | /* Enable TXD tristate behavior for PCH */ |
| 109 | sscr1 |= SSP_SSC1_TTELP | SSP_SSC1_TTE; |
| 110 | |
| 111 | /* Disable DMA Tx/Rx service request */ |
| 112 | sscr1 |= SSP_SSC1_TSRE | SSP_SSC1_RSRE; |
| 113 | |
| 114 | /* Clock on during transfer */ |
| 115 | sscr1 |= SSP_SSC1_SCFR; |
| 116 | |
| 117 | /* Set FIFO thresholds */ |
| 118 | sscr1 |= SSP_FIFO_SIZE << SSP_SSC1_RFT_SHIFT; |
| 119 | sscr1 |= SSP_FIFO_SIZE << SSP_SSC1_TFT_SHIFT; |
| 120 | |
| 121 | /* Disable interrupts */ |
| 122 | sscr1 &= ~(SSP_SSC1_EBCEI | SSP_SSC1_TINTE | SSP_SSC1_PINTE); |
| 123 | sscr1 &= ~(SSP_SSC1_LBM | SSP_SSC1_RWOT); |
| 124 | |
| 125 | writel(sscr1, &priv->regs->sscr1); |
| 126 | } |
| 127 | |
| 128 | static void init_sspsp(struct broadwell_i2s_priv *priv) |
| 129 | { |
| 130 | u32 sspsp = readl(&priv->regs->sspsp); |
| 131 | |
| 132 | sspsp &= SSP_PSP_RESERVED; |
| 133 | sspsp |= priv->sclk_mode << SSP_PSP_SCMODE_SHIFT; |
| 134 | sspsp |= (priv->sclk_dummy_stop << SSP_PSP_DMYSTOP_SHIFT) & |
| 135 | SSP_PSP_DMYSTOP_MASK; |
| 136 | sspsp |= (priv->sclk_dummy_stop >> 2 << SSP_PSP_EDYMSTOP_SHIFT) & |
| 137 | SSP_PSP_EDMYSTOP_MASK; |
| 138 | sspsp |= priv->sclk_frame_width << SSP_PSP_SFRMWDTH_SHIFT; |
| 139 | |
| 140 | /* Frame Sync Relative Timing */ |
| 141 | if (priv->rel_timing == NEXT_FRMS_AFTER_END_OF_T4) |
| 142 | sspsp |= SSP_PSP_FSRT; |
| 143 | else |
| 144 | sspsp &= ~SSP_PSP_FSRT; |
| 145 | |
| 146 | /* Serial Frame Polarity */ |
| 147 | if (priv->sfrm_polarity == SSP_FRMS_ACTIVE_HIGH) |
| 148 | sspsp |= SSP_PSP_SFRMP; |
| 149 | else |
| 150 | sspsp &= ~SSP_PSP_SFRMP; |
| 151 | |
| 152 | /* End Data Transfer State */ |
| 153 | if (priv->end_transfer_state == SSP_END_TRANSFER_STATE_LOW) |
| 154 | sspsp &= ~SSP_PSP_ETDS; |
| 155 | else |
| 156 | sspsp |= SSP_PSP_ETDS; |
| 157 | |
| 158 | writel(sspsp, &priv->regs->sspsp); |
| 159 | } |
| 160 | |
| 161 | static void init_ssp_time_slot(struct broadwell_i2s_priv *priv) |
| 162 | { |
| 163 | writel(3, &priv->regs->sstsa); |
| 164 | writel(3, &priv->regs->ssrsa); |
| 165 | } |
| 166 | |
| 167 | static int bdw_i2s_init(struct udevice *dev) |
| 168 | { |
| 169 | struct i2s_uc_priv *uc_priv = dev_get_uclass_priv(dev); |
| 170 | struct broadwell_i2s_priv *priv = dev_get_priv(dev); |
| 171 | |
| 172 | init_shim_csr(priv); |
| 173 | init_shim_clkctl(uc_priv, priv); |
| 174 | init_sscr0(uc_priv, priv); |
| 175 | init_sscr1(priv); |
| 176 | init_sspsp(priv); |
| 177 | init_ssp_time_slot(priv); |
| 178 | |
| 179 | return 0; |
| 180 | } |
| 181 | |
| 182 | static void bdw_i2s_enable(struct broadwell_i2s_priv *priv) |
| 183 | { |
| 184 | setbits_le32(&priv->regs->sscr0, SSP_SSC0_SSE); |
| 185 | setbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN); |
| 186 | } |
| 187 | |
| 188 | static void bdw_i2s_disable(struct broadwell_i2s_priv *priv) |
| 189 | { |
| 190 | clrbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN); |
| 191 | clrbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN); |
| 192 | } |
| 193 | |
| 194 | static int broadwell_i2s_tx_data(struct udevice *dev, void *data, |
| 195 | uint data_size) |
| 196 | { |
| 197 | struct broadwell_i2s_priv *priv = dev_get_priv(dev); |
| 198 | u32 *ptr = data; |
| 199 | |
| 200 | log_debug("data=%p, data_size=%x\n", data, data_size); |
| 201 | if (data_size < SSP_FIFO_SIZE) { |
| 202 | log_err("Invalid I2S data size\n"); |
| 203 | return -ENODATA; |
| 204 | } |
| 205 | |
| 206 | /* Enable I2S interface */ |
| 207 | bdw_i2s_enable(priv); |
| 208 | |
| 209 | /* Transfer data */ |
| 210 | while (data_size > 0) { |
| 211 | ulong start = timer_get_us() + 100000; |
| 212 | |
| 213 | /* Write data if transmit FIFO has room */ |
| 214 | if (readl(&priv->regs->sssr) & SSP_SSS_TNF) { |
| 215 | writel(*ptr++, &priv->regs->ssdr); |
| 216 | data_size -= sizeof(*ptr); |
| 217 | } else { |
| 218 | if ((long)(timer_get_us() - start) > 0) { |
| 219 | /* Disable I2S interface */ |
| 220 | bdw_i2s_disable(priv); |
| 221 | log_debug("I2S Transfer Timeout\n"); |
| 222 | return -ETIMEDOUT; |
| 223 | } |
| 224 | } |
| 225 | } |
| 226 | |
| 227 | /* Disable I2S interface */ |
| 228 | bdw_i2s_disable(priv); |
| 229 | log_debug("done\n"); |
| 230 | |
| 231 | return 0; |
| 232 | } |
| 233 | |
| 234 | static int broadwell_i2s_probe(struct udevice *dev) |
| 235 | { |
| 236 | struct i2s_uc_priv *uc_priv = dev_get_uclass_priv(dev); |
| 237 | struct broadwell_i2s_priv *priv = dev_get_priv(dev); |
| 238 | struct udevice *adsp = dev_get_parent(dev); |
| 239 | u32 bar0, offset; |
| 240 | int ret; |
| 241 | |
| 242 | bar0 = dm_pci_read_bar32(adsp, 0); |
| 243 | if (!bar0) { |
| 244 | log_debug("Cannot read adsp bar0\n"); |
| 245 | return -EINVAL; |
| 246 | } |
| 247 | offset = dev_read_addr_index(dev, 0); |
| 248 | if (offset == FDT_ADDR_T_NONE) { |
| 249 | log_debug("Cannot read address index 0\n"); |
| 250 | return -EINVAL; |
| 251 | } |
| 252 | uc_priv->base_address = bar0 + offset; |
| 253 | |
| 254 | /* |
| 255 | * Hard-code these values. If other settings are required we can add |
| 256 | * this to the device tree. |
| 257 | */ |
| 258 | uc_priv->rfs = 64; |
| 259 | uc_priv->bfs = 32; |
| 260 | uc_priv->audio_pll_clk = 24 * 1000 * 1000; |
| 261 | uc_priv->samplingrate = 48000; |
| 262 | uc_priv->bitspersample = 16; |
| 263 | uc_priv->channels = 2; |
| 264 | uc_priv->id = 0; |
| 265 | |
| 266 | priv->shim = (struct i2s_shim_regs *)uc_priv->base_address; |
| 267 | priv->sfrm_polarity = SSP_FRMS_ACTIVE_LOW; |
| 268 | priv->end_transfer_state = SSP_END_TRANSFER_STATE_LOW; |
| 269 | priv->sclk_mode = SCLK_MODE_DDF_DSR_ISL; |
| 270 | priv->rel_timing = NEXT_FRMS_WITH_LSB_PREVIOUS_FRM; |
| 271 | priv->sclk_dummy_stop = 0; |
| 272 | priv->sclk_frame_width = 31; |
| 273 | |
| 274 | offset = dev_read_addr_index(dev, 1 + uc_priv->id); |
| 275 | if (offset == FDT_ADDR_T_NONE) { |
| 276 | log_debug("Cannot read address index %d\n", 1 + uc_priv->id); |
| 277 | return -EINVAL; |
| 278 | } |
| 279 | log_debug("bar0=%x, uc_priv->base_address=%x, offset=%x\n", bar0, |
| 280 | uc_priv->base_address, offset); |
| 281 | priv->regs = (struct broadwell_i2s_regs *)(bar0 + offset); |
| 282 | |
| 283 | ret = bdw_i2s_init(dev); |
| 284 | if (ret) |
| 285 | return ret; |
| 286 | |
| 287 | return 0; |
| 288 | } |
| 289 | |
| 290 | static const struct i2s_ops broadwell_i2s_ops = { |
| 291 | .tx_data = broadwell_i2s_tx_data, |
| 292 | }; |
| 293 | |
| 294 | static const struct udevice_id broadwell_i2s_ids[] = { |
| 295 | { .compatible = "intel,broadwell-i2s" }, |
| 296 | { } |
| 297 | }; |
| 298 | |
| 299 | U_BOOT_DRIVER(broadwell_i2s) = { |
| 300 | .name = "broadwell_i2s", |
| 301 | .id = UCLASS_I2S, |
| 302 | .of_match = broadwell_i2s_ids, |
| 303 | .probe = broadwell_i2s_probe, |
| 304 | .ops = &broadwell_i2s_ops, |
| 305 | .priv_auto_alloc_size = sizeof(struct broadwell_i2s_priv), |
| 306 | }; |