blob: 80697a5ce31c74c78779ddda2e1c9c1404372451 [file] [log] [blame]
Andy Fleming67431052007-04-23 02:54:25 -05001/*
2 * Copyright 2004-2007 Freescale Semiconductor.
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23/*
24 * mpc8568mds board configuration file
25 */
26#ifndef __CONFIG_H
27#define __CONFIG_H
28
29/* High Level Configuration Options */
30#define CONFIG_BOOKE 1 /* BOOKE */
Andy Flemingda9d4612007-08-14 00:14:25 -050031#define CONFIG_E500 1 /* BOOKE e500 family */
Andy Fleming67431052007-04-23 02:54:25 -050032#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */
33#define CONFIG_MPC8568 1 /* MPC8568 specific */
34#define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */
35
Haiying Wang1563f562007-11-14 15:52:06 -050036#define CONFIG_PCI 1 /* Enable PCI/PCIE */
37#define CONFIG_PCI1 1 /* PCI controller */
38#define CONFIG_PCIE1 1 /* PCIE controller */
39#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
Kumar Gala8ff3de62007-12-07 12:17:34 -060040#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020041#define CONFIG_TSEC_ENET /* tsec ethernet support */
Andy Flemingb96c83d2007-08-15 20:03:34 -050042#define CONFIG_QE /* Enable QE */
Andy Fleming67431052007-04-23 02:54:25 -050043#define CONFIG_ENV_OVERWRITE
Kumar Gala4d3521c2008-01-16 09:15:29 -060044#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
Andy Fleming67431052007-04-23 02:54:25 -050045
46/*
47 * When initializing flash, if we cannot find the manufacturer ID,
48 * assume this is the AMD flash associated with the MDS board.
49 * This allows booting from a promjet.
50 */
51#define CONFIG_ASSUME_AMD_FLASH
52
Andy Fleming67431052007-04-23 02:54:25 -050053#ifndef __ASSEMBLY__
54extern unsigned long get_clock_freq(void);
55#endif /*Replace a call to get_clock_freq (after it is implemented)*/
56#define CONFIG_SYS_CLK_FREQ 66000000 /*TODO: restore if wanting to read from BCSR: get_clock_freq()*/ /* sysclk for MPC85xx */
57
58/*
59 * These can be toggled for performance analysis, otherwise use default.
60 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020061#define CONFIG_L2_CACHE /* toggle L2 cache */
Haiying Wang7a1ac412007-08-23 15:20:54 -040062#define CONFIG_BTB /* toggle branch predition */
63#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
Andy Fleming67431052007-04-23 02:54:25 -050064
65/*
66 * Only possible on E500 Version 2 or newer cores.
67 */
68#define CONFIG_ENABLE_36BIT_PHYS 1
69
70
71#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
72
Andy Fleming67431052007-04-23 02:54:25 -050073#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
74#define CFG_MEMTEST_END 0x00400000
75
76/*
77 * Base addresses -- Note these are effective addresses where the
78 * actual resources get mapped (not physical addresses)
79 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020080#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
Andy Fleming67431052007-04-23 02:54:25 -050081#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
Kumar Galaf69766e2008-01-30 14:55:14 -060082#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
Andy Fleming67431052007-04-23 02:54:25 -050083#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
84
Haiying Wang1563f562007-11-14 15:52:06 -050085#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
86#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
87
Jon Loeligere6f5b352008-03-18 13:51:05 -050088/* DDR Setup */
89#define CONFIG_FSL_DDR2
90#undef CONFIG_FSL_DDR_INTERACTIVE
91#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
92#define CONFIG_DDR_SPD
93#define CONFIG_DDR_DLL /* possible DLL fix needed */
94#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
95
96#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
97
Andy Fleming67431052007-04-23 02:54:25 -050098#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
99#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
100
Jon Loeligere6f5b352008-03-18 13:51:05 -0500101#define CONFIG_NUM_DDR_CONTROLLERS 1
102#define CONFIG_DIMM_SLOTS_PER_CTLR 1
103#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
Andy Fleming67431052007-04-23 02:54:25 -0500104
Jon Loeligere6f5b352008-03-18 13:51:05 -0500105/* I2C addresses of SPD EEPROMs */
106#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
107
108/* Make sure required options are set */
Andy Fleming67431052007-04-23 02:54:25 -0500109#ifndef CONFIG_SPD_EEPROM
110#error ("CONFIG_SPD_EEPROM is required")
111#endif
112
113#undef CONFIG_CLOCKS_IN_MHZ
114
Andy Fleming67431052007-04-23 02:54:25 -0500115/*
116 * Local Bus Definitions
117 */
118
119/*
120 * FLASH on the Local Bus
121 * Two banks, 8M each, using the CFI driver.
122 * Boot from BR0/OR0 bank at 0xff00_0000
123 * Alternate BR1/OR1 bank at 0xff80_0000
124 *
125 * BR0, BR1:
126 * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
127 * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
128 * Port Size = 16 bits = BRx[19:20] = 10
129 * Use GPCM = BRx[24:26] = 000
130 * Valid = BRx[31] = 1
131 *
132 * 0 4 8 12 16 20 24 28
133 * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
134 * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
135 *
136 * OR0, OR1:
137 * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
138 * Reserved ORx[17:18] = 11, confusion here?
139 * CSNT = ORx[20] = 1
140 * ACS = half cycle delay = ORx[21:22] = 11
141 * SCY = 6 = ORx[24:27] = 0110
142 * TRLX = use relaxed timing = ORx[29] = 1
143 * EAD = use external address latch delay = OR[31] = 1
144 *
145 * 0 4 8 12 16 20 24 28
146 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
147 */
148#define CFG_BCSR_BASE 0xf8000000
149
150#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH 32M */
151
152/*Chip select 0 - Flash*/
153#define CFG_BR0_PRELIM 0xfe001001
154#define CFG_OR0_PRELIM 0xfe006ff7
155
156/*Chip slelect 1 - BCSR*/
157#define CFG_BR1_PRELIM 0xf8000801
158#define CFG_OR1_PRELIM 0xffffe9f7
159
Wolfgang Denk2f152782007-05-05 18:23:11 +0200160/*#define CFG_FLASH_BANKS_LIST {0xff800000, CFG_FLASH_BASE} */
Andy Fleming67431052007-04-23 02:54:25 -0500161#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
162#define CFG_MAX_FLASH_SECT 512 /* sectors per device */
163#undef CFG_FLASH_CHECKSUM
164#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
165#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
166
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200167#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
Andy Fleming67431052007-04-23 02:54:25 -0500168
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200169#define CONFIG_FLASH_CFI_DRIVER
Andy Fleming67431052007-04-23 02:54:25 -0500170#define CFG_FLASH_CFI
171#define CFG_FLASH_EMPTY_INFO
172
173
174/*
175 * SDRAM on the LocalBus
176 */
177#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
178#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
179
180
181/*Chip select 2 - SDRAM*/
182#define CFG_BR2_PRELIM 0xf0001861
183#define CFG_OR2_PRELIM 0xfc006901
184
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200185#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
186#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
187#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
188#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
Andy Fleming67431052007-04-23 02:54:25 -0500189
190/*
191 * LSDMR masks
192 */
193#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
194#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
195#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
196#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
197#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
198#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
199#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
200#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
201#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
202#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
203
204#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
205#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
206#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
207#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
208#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
209#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
210#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
211#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
212
213/*
214 * Common settings for all Local Bus SDRAM commands.
215 * At run time, either BSMA1516 (for CPU 1.1)
216 * or BSMA1617 (for CPU 1.0) (old)
217 * is OR'ed in too.
218 */
219#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
220 | CFG_LBC_LSDMR_PRETOACT7 \
221 | CFG_LBC_LSDMR_ACTTORW7 \
222 | CFG_LBC_LSDMR_BL8 \
223 | CFG_LBC_LSDMR_WRC4 \
224 | CFG_LBC_LSDMR_CL3 \
225 | CFG_LBC_LSDMR_RFEN \
226 )
227
228/*
229 * The bcsr registers are connected to CS3 on MDS.
230 * The new memory map places bcsr at 0xf8000000.
231 *
232 * For BR3, need:
233 * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
234 * port-size = 8-bits = BR[19:20] = 01
235 * no parity checking = BR[21:22] = 00
236 * GPMC for MSEL = BR[24:26] = 000
237 * Valid = BR[31] = 1
238 *
239 * 0 4 8 12 16 20 24 28
240 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
241 *
242 * For OR3, need:
243 * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
244 * disable buffer ctrl OR[19] = 0
245 * CSNT OR[20] = 1
246 * ACS OR[21:22] = 11
247 * XACS OR[23] = 1
248 * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
249 * SETA OR[28] = 0
250 * TRLX OR[29] = 1
251 * EHTR OR[30] = 1
252 * EAD extra time OR[31] = 1
253 *
254 * 0 4 8 12 16 20 24 28
255 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
256 */
257#define CFG_BCSR (0xf8000000)
258
259/*Chip slelect 4 - PIB*/
260#define CFG_BR4_PRELIM 0xf8008801
261#define CFG_OR4_PRELIM 0xffffe9f7
262
263/*Chip select 5 - PIB*/
264#define CFG_BR5_PRELIM 0xf8010801
265#define CFG_OR5_PRELIM 0xffff69f7
266
267#define CONFIG_L1_INIT_RAM
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200268#define CFG_INIT_RAM_LOCK 1
Andy Fleming67431052007-04-23 02:54:25 -0500269#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200270#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
Andy Fleming67431052007-04-23 02:54:25 -0500271
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200272#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
Andy Fleming67431052007-04-23 02:54:25 -0500273#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
274#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
275
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200276#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
277#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
Andy Fleming67431052007-04-23 02:54:25 -0500278
279/* Serial Port */
280#define CONFIG_CONS_INDEX 1
281#undef CONFIG_SERIAL_SOFTWARE_FIFO
282#define CFG_NS16550
283#define CFG_NS16550_SERIAL
284#define CFG_NS16550_REG_SIZE 1
285#define CFG_NS16550_CLK get_bus_freq(0)
286
287#define CFG_BAUDRATE_TABLE \
288 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
289
290#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
291#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
292
293/* Use the HUSH parser*/
294#define CFG_HUSH_PARSER
295#ifdef CFG_HUSH_PARSER
296#define CFG_PROMPT_HUSH_PS2 "> "
297#endif
298
299/* pass open firmware flat tree */
Kumar Galac4808612007-11-29 01:06:19 -0600300#define CONFIG_OF_LIBFDT 1
301#define CONFIG_OF_BOARD_SETUP 1
302#define CONFIG_OF_STDOUT_VIA_ALIAS 1
Andy Fleming67431052007-04-23 02:54:25 -0500303
Jon Loeligere6f5b352008-03-18 13:51:05 -0500304#define CFG_64BIT_VSPRINTF 1
305#define CFG_64BIT_STRTOUL 1
306
Andy Fleming67431052007-04-23 02:54:25 -0500307/*
308 * I2C
309 */
310#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
311#define CONFIG_HARD_I2C /* I2C with hardware support*/
312#undef CONFIG_SOFT_I2C /* I2C bit-banged */
Haiying Wangc59e4092007-06-19 14:18:34 -0400313#define CONFIG_I2C_MULTI_BUS
314#define CONFIG_I2C_CMD_TREE
Andy Fleming67431052007-04-23 02:54:25 -0500315#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
Haiying Wangc59e4092007-06-19 14:18:34 -0400316#define CFG_I2C_EEPROM_ADDR 0x52
Andy Fleming67431052007-04-23 02:54:25 -0500317#define CFG_I2C_SLAVE 0x7F
Andy Flemingda9d4612007-08-14 00:14:25 -0500318#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
Andy Fleming67431052007-04-23 02:54:25 -0500319#define CFG_I2C_OFFSET 0x3000
Haiying Wangc59e4092007-06-19 14:18:34 -0400320#define CFG_I2C2_OFFSET 0x3100
Andy Fleming67431052007-04-23 02:54:25 -0500321
322/*
323 * General PCI
324 * Memory Addresses are mapped 1-1. I/O is mapped from 0
325 */
326#define CFG_PCI1_MEM_BASE 0x80000000
327#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
Haiying Wangc59e4092007-06-19 14:18:34 -0400328#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
Andy Fleming67431052007-04-23 02:54:25 -0500329#define CFG_PCI1_IO_BASE 0x00000000
330#define CFG_PCI1_IO_PHYS 0xe2000000
331#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */
332
Haiying Wang1563f562007-11-14 15:52:06 -0500333#define CFG_PCIE1_MEM_BASE 0xa0000000
334#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
335#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
336#define CFG_PCIE1_IO_BASE 0x00000000
337#define CFG_PCIE1_IO_PHYS 0xe2800000
338#define CFG_PCIE1_IO_SIZE 0x00800000 /* 8M */
Andy Fleming67431052007-04-23 02:54:25 -0500339
340#define CFG_SRIO_MEM_BASE 0xc0000000
341
Andy Flemingda9d4612007-08-14 00:14:25 -0500342#ifdef CONFIG_QE
343/*
344 * QE UEC ethernet configuration
345 */
346#define CONFIG_UEC_ETH
347#ifndef CONFIG_TSEC_ENET
Andy Flemingb96c83d2007-08-15 20:03:34 -0500348#define CONFIG_ETHPRIME "FSL UEC0"
Andy Flemingda9d4612007-08-14 00:14:25 -0500349#endif
350#define CONFIG_PHY_MODE_NEED_CHANGE
351#define CONFIG_eTSEC_MDIO_BUS
352
353#ifdef CONFIG_eTSEC_MDIO_BUS
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200354#define CONFIG_MIIM_ADDRESS 0xE0024520
Andy Flemingda9d4612007-08-14 00:14:25 -0500355#endif
356
357#define CONFIG_UEC_ETH1 /* GETH1 */
358
359#ifdef CONFIG_UEC_ETH1
360#define CFG_UEC1_UCC_NUM 0 /* UCC1 */
361#define CFG_UEC1_RX_CLK QE_CLK_NONE
362#define CFG_UEC1_TX_CLK QE_CLK16
363#define CFG_UEC1_ETH_TYPE GIGA_ETH
364#define CFG_UEC1_PHY_ADDR 7
365#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
366#endif
367
368#define CONFIG_UEC_ETH2 /* GETH2 */
369
370#ifdef CONFIG_UEC_ETH2
371#define CFG_UEC2_UCC_NUM 1 /* UCC2 */
372#define CFG_UEC2_RX_CLK QE_CLK_NONE
373#define CFG_UEC2_TX_CLK QE_CLK16
374#define CFG_UEC2_ETH_TYPE GIGA_ETH
375#define CFG_UEC2_PHY_ADDR 1
376#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
377#endif
378#endif /* CONFIG_QE */
379
Haiying Wangf30ad492007-11-19 10:02:13 -0500380#if defined(CONFIG_PCI)
381
382#define CONFIG_NET_MULTI
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200383#define CONFIG_PCI_PNP /* do pci plug-and-play */
Haiying Wangf30ad492007-11-19 10:02:13 -0500384
Andy Fleming67431052007-04-23 02:54:25 -0500385#undef CONFIG_EEPRO100
386#undef CONFIG_TULIP
387
388#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
389#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
390
Haiying Wang1563f562007-11-14 15:52:06 -0500391/* PCI view of System Memory */
392#define CFG_PCI_MEMORY_BUS 0x00000000
393#define CFG_PCI_MEMORY_PHYS 0x00000000
394#define CFG_PCI_MEMORY_SIZE 0x80000000
395
Andy Fleming67431052007-04-23 02:54:25 -0500396#endif /* CONFIG_PCI */
397
Andy Fleming67431052007-04-23 02:54:25 -0500398#ifndef CONFIG_NET_MULTI
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200399#define CONFIG_NET_MULTI 1
Andy Fleming67431052007-04-23 02:54:25 -0500400#endif
401
Andy Flemingda9d4612007-08-14 00:14:25 -0500402#if defined(CONFIG_TSEC_ENET)
403
Andy Fleming67431052007-04-23 02:54:25 -0500404#define CONFIG_MII 1 /* MII PHY management */
Kim Phillips255a35772007-05-16 16:52:19 -0500405#define CONFIG_TSEC1 1
406#define CONFIG_TSEC1_NAME "eTSEC0"
407#define CONFIG_TSEC2 1
408#define CONFIG_TSEC2_NAME "eTSEC1"
Andy Fleming67431052007-04-23 02:54:25 -0500409
410#define TSEC1_PHY_ADDR 2
411#define TSEC2_PHY_ADDR 3
412
413#define TSEC1_PHYIDX 0
414#define TSEC2_PHYIDX 0
415
Andy Fleming3a790132007-08-15 20:03:25 -0500416#define TSEC1_FLAGS TSEC_GIGABIT
417#define TSEC2_FLAGS TSEC_GIGABIT
418
Andy Flemingb96c83d2007-08-15 20:03:34 -0500419/* Options are: eTSEC[0-1] */
Andy Fleming67431052007-04-23 02:54:25 -0500420#define CONFIG_ETHPRIME "eTSEC0"
421
422#endif /* CONFIG_TSEC_ENET */
423
424/*
425 * Environment
426 */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200427#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200428#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
429#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
430#define CONFIG_ENV_SIZE 0x2000
Andy Fleming67431052007-04-23 02:54:25 -0500431
432#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
433#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
434
Jon Loeliger2835e512007-06-13 13:22:08 -0500435
436/*
Jon Loeliger079a1362007-07-10 10:12:10 -0500437 * BOOTP options
438 */
439#define CONFIG_BOOTP_BOOTFILESIZE
440#define CONFIG_BOOTP_BOOTPATH
441#define CONFIG_BOOTP_GATEWAY
442#define CONFIG_BOOTP_HOSTNAME
443
444
445/*
Jon Loeliger2835e512007-06-13 13:22:08 -0500446 * Command line configuration.
447 */
448#include <config_cmd_default.h>
449
450#define CONFIG_CMD_PING
451#define CONFIG_CMD_I2C
452#define CONFIG_CMD_MII
Kumar Gala82ac8c92007-12-07 12:04:30 -0600453#define CONFIG_CMD_ELF
Jon Loeliger2835e512007-06-13 13:22:08 -0500454
Andy Fleming67431052007-04-23 02:54:25 -0500455#if defined(CONFIG_PCI)
Jon Loeliger2835e512007-06-13 13:22:08 -0500456 #define CONFIG_CMD_PCI
Andy Fleming67431052007-04-23 02:54:25 -0500457#endif
Jon Loeliger2835e512007-06-13 13:22:08 -0500458
Andy Fleming67431052007-04-23 02:54:25 -0500459
460#undef CONFIG_WATCHDOG /* watchdog disabled */
461
462/*
463 * Miscellaneous configurable options
464 */
465#define CFG_LONGHELP /* undef to save memory */
Kumar Gala22abb2d2007-11-29 10:34:28 -0600466#define CONFIG_CMDLINE_EDITING /* Command-line editing */
Andy Fleming67431052007-04-23 02:54:25 -0500467#define CFG_LOAD_ADDR 0x2000000 /* default load address */
468#define CFG_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger2835e512007-06-13 13:22:08 -0500469#if defined(CONFIG_CMD_KGDB)
Andy Fleming67431052007-04-23 02:54:25 -0500470#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
471#else
472#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
473#endif
474#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
475#define CFG_MAXARGS 16 /* max number of command args */
476#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
477#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
478
479/*
480 * For booting Linux, the board info and command line data
481 * have to be in the first 8 MB of memory, since this is
482 * the maximum mapped by the Linux kernel during initialization.
483 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200484#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
Andy Fleming67431052007-04-23 02:54:25 -0500485
Andy Fleming67431052007-04-23 02:54:25 -0500486/*
487 * Internal Definitions
488 *
489 * Boot Flags
490 */
491#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
492#define BOOTFLAG_WARM 0x02 /* Software reboot */
493
Jon Loeliger2835e512007-06-13 13:22:08 -0500494#if defined(CONFIG_CMD_KGDB)
Andy Fleming67431052007-04-23 02:54:25 -0500495#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
496#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
497#endif
498
499/*
500 * Environment Configuration
501 */
502
503/* The mac addresses for all ethernet interface */
Andy Flemingda9d4612007-08-14 00:14:25 -0500504#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH)
505#define CONFIG_HAS_ETH0
Andy Fleming67431052007-04-23 02:54:25 -0500506#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
507#define CONFIG_HAS_ETH1
508#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
509#define CONFIG_HAS_ETH2
510#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
Andy Flemingda9d4612007-08-14 00:14:25 -0500511#define CONFIG_HAS_ETH3
512#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
Andy Fleming67431052007-04-23 02:54:25 -0500513#endif
514
515#define CONFIG_IPADDR 192.168.1.253
516
517#define CONFIG_HOSTNAME unknown
518#define CONFIG_ROOTPATH /nfsroot
519#define CONFIG_BOOTFILE your.uImage
520
521#define CONFIG_SERVERIP 192.168.1.1
522#define CONFIG_GATEWAYIP 192.168.1.1
523#define CONFIG_NETMASK 255.255.255.0
524
525#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
526
527#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
528#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
529
530#define CONFIG_BAUDRATE 115200
531
532#define CONFIG_EXTRA_ENV_SETTINGS \
533 "netdev=eth0\0" \
534 "consoledev=ttyS0\0" \
535 "ramdiskaddr=600000\0" \
536 "ramdiskfile=your.ramdisk.u-boot\0" \
537 "fdtaddr=400000\0" \
538 "fdtfile=your.fdt.dtb\0" \
539 "nfsargs=setenv bootargs root=/dev/nfs rw " \
540 "nfsroot=$serverip:$rootpath " \
541 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
542 "console=$consoledev,$baudrate $othbootargs\0" \
543 "ramargs=setenv bootargs root=/dev/ram rw " \
544 "console=$consoledev,$baudrate $othbootargs\0" \
545
546
547#define CONFIG_NFSBOOTCOMMAND \
548 "run nfsargs;" \
549 "tftp $loadaddr $bootfile;" \
550 "tftp $fdtaddr $fdtfile;" \
551 "bootm $loadaddr - $fdtaddr"
552
553
554#define CONFIG_RAMBOOTCOMMAND \
555 "run ramargs;" \
556 "tftp $ramdiskaddr $ramdiskfile;" \
557 "tftp $loadaddr $bootfile;" \
558 "bootm $loadaddr $ramdiskaddr"
559
560#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
561
562#endif /* __CONFIG_H */