blob: 212dee7f28c548f3500d436f6f5b3c85fc1d32f7 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Tim Harvey88c307d2014-06-02 16:13:19 -07002/*
3 * Copyright (C) 2014 Gateworks Corporation
4 * Author: Tim Harvey <tharvey@gateworks.com>
Tim Harvey88c307d2014-06-02 16:13:19 -07005 */
6#ifndef __IMX6_SPL_CONFIG_H
7#define __IMX6_SPL_CONFIG_H
8
9#ifdef CONFIG_SPL
Tim Harvey88c307d2014-06-02 16:13:19 -070010/*
11 * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
12 * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
13 * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
14 * - BOOT ROM stack is at 0x0091FFB8
15 * - if icache/dcache is enabled (eFuse/strapping controlled) then the
16 * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
17 * fit between 0x00907000 and 0x00918000.
18 * - Additionally the BOOT ROM loads what they consider the firmware image
19 * which consists of a 4K header in front of us that contains the IVT, DCD
20 * and some padding thus 'our' max size is really 0x00908000 - 0x00918000
21 * or 64KB
22 */
Marek Vasutf91c09a2014-10-24 23:39:07 +020023#define CONFIG_SPL_MAX_SIZE 0x10000
Tim Harvey88c307d2014-06-02 16:13:19 -070024#define CONFIG_SPL_STACK 0x0091FFB8
Stefan Agner04050922016-11-15 10:38:23 -080025/*
26 * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
27 * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
28 * boot media (given that boot media specific offset is configured properly).
29 */
30#define CONFIG_SPL_PAD_TO 0x11000
Tim Harvey88c307d2014-06-02 16:13:19 -070031
Tim Harvey88c307d2014-06-02 16:13:19 -070032/* MMC support */
33#if defined(CONFIG_SPL_MMC_SUPPORT)
Paul Kocialkowskie2ccdf82014-11-08 23:14:55 +010034#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
Semen Protsenko693d4c92016-11-16 19:19:06 +020035#define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */
Tim Harvey88c307d2014-06-02 16:13:19 -070036#endif
37
38/* SATA support */
39#if defined(CONFIG_SPL_SATA_SUPPORT)
40#define CONFIG_SPL_SATA_BOOT_DEVICE 0
41#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
42#endif
43
44/* Define the payload for FAT/EXT support */
Tien Fong Cheef4b40922019-01-23 14:20:05 +080045#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
Jagan Tekied2d02d2017-06-01 22:58:34 +053046# ifdef CONFIG_OF_CONTROL
47# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
48# else
49# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
50# endif
Tim Harvey88c307d2014-06-02 16:13:19 -070051#endif
52
Fabio Estevam290e7cf2018-01-03 12:33:05 -020053#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
54 defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
Peng Fanf9e89ff2014-12-30 17:24:02 +080055#define CONFIG_SPL_BSS_START_ADDR 0x88200000
Marek Vasutfef438d2015-11-20 21:43:24 +010056#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
Peng Fanf9e89ff2014-12-30 17:24:02 +080057#define CONFIG_SYS_SPL_MALLOC_START 0x88300000
Marek Vasutfef438d2015-11-20 21:43:24 +010058#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
Peng Fanf9e89ff2014-12-30 17:24:02 +080059#else
Tim Harvey88c307d2014-06-02 16:13:19 -070060#define CONFIG_SPL_BSS_START_ADDR 0x18200000
61#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
62#define CONFIG_SYS_SPL_MALLOC_START 0x18300000
Marek Vasutfef438d2015-11-20 21:43:24 +010063#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
Tim Harvey88c307d2014-06-02 16:13:19 -070064#endif
Peng Fanf9e89ff2014-12-30 17:24:02 +080065#endif
Tim Harvey88c307d2014-06-02 16:13:19 -070066
67#endif