blob: eb93a8f083f7e4ab2f2039de445c90d4817013fb [file] [log] [blame]
wdenkd9fd6ff2002-10-11 08:43:32 +00001/*
2 * (C) Copyright 2002
3 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
4 *
5 * (C) Copyright 2002
6 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
7 * Marius Groeger <mgroeger@sysgo.de>
8 *
9 * See file CREDITS for list of people who contributed to this
10 * project.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * MA 02111-1307 USA
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
wdenkd9fd6ff2002-10-11 08:43:32 +000032 * High Level Configuration Options
33 * (easy to change)
34 */
35#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
36#define CONFIG_HHP_CRADLE 1 /* on an Cradle Board */
37
38#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
39
40/*
41 * Size of malloc() pool
42 */
wdenk699b13a2002-11-03 18:03:52 +000043#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
wdenka8c7c702003-12-06 19:49:23 +000044#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
wdenkd9fd6ff2002-10-11 08:43:32 +000045
46/*
47 * Hardware drivers
48 */
49#define CONFIG_DRIVER_SMC91111
50#define CONFIG_SMC91111_BASE 0x10000300
51#define CONFIG_SMC91111_EXT_PHY
52#define CONFIG_SMC_USE_32_BIT
53
54/*
55 * select serial console configuration
56 */
57#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
58
59/* allow to overwrite serial and ethaddr */
60#define CONFIG_ENV_OVERWRITE
61
62#define CONFIG_BAUDRATE 115200
63
wdenkd9fd6ff2002-10-11 08:43:32 +000064
Jon Loeliger37e4f242007-07-04 22:31:56 -050065/*
Jon Loeliger80ff4f92007-07-10 09:29:01 -050066 * BOOTP options
67 */
68#define CONFIG_BOOTP_BOOTFILESIZE
69#define CONFIG_BOOTP_BOOTPATH
70#define CONFIG_BOOTP_GATEWAY
71#define CONFIG_BOOTP_HOSTNAME
72
73
74/*
Jon Loeliger37e4f242007-07-04 22:31:56 -050075 * Command line configuration.
76 */
77#include <config_cmd_default.h>
78
wdenkd9fd6ff2002-10-11 08:43:32 +000079
80#define CONFIG_BOOTDELAY 3
81#define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,115200"
82#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
83#define CONFIG_NETMASK 255.255.0.0
84#define CONFIG_IPADDR 192.168.0.21
85#define CONFIG_SERVERIP 192.168.0.250
86#define CONFIG_BOOTCOMMAND "bootm 40000"
87#define CONFIG_CMDLINE_TAG
88
89/*
90 * Miscellaneous configurable options
91 */
92#define CFG_LONGHELP /* undef to save memory */
93#define CFG_PROMPT "=> " /* Monitor Command Prompt */
94#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
95#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
96#define CFG_MAXARGS 16 /* max number of command args */
97#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
98
99#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
100#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
101
102#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
103
104#define CFG_LOAD_ADDR 0xa2000000 /* default load address */
105
106#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
107#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
108
wdenk8bde7f72003-06-27 21:31:46 +0000109 /* valid baudrates */
wdenkd9fd6ff2002-10-11 08:43:32 +0000110#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
111
112/*
113 * Stack sizes
114 *
115 * The stack sizes are set up in start.S using the settings below
116 */
117#define CONFIG_STACKSIZE (128*1024) /* regular stack */
118#ifdef CONFIG_USE_IRQ
119#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
120#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
121#endif
122
123/*
124 * Physical Memory Map
125 */
126#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
127#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
128#define PHYS_SDRAM_1_SIZE 0x01000000 /* 64 MB */
129#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
130#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
131#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
132#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
133#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
134#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
135
136#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
137#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */
138#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
139
140#define CFG_DRAM_BASE 0xa0000000
141#define CFG_DRAM_SIZE 0x04000000
142
143#define CFG_FLASH_BASE PHYS_FLASH_1
144
145/*
146 * FLASH and environment organization
147 */
148#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
149#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
150
151/* timeout values are in ticks */
152#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
153#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
154
155#define CFG_ENV_IS_IN_FLASH 1
156#define CFG_ENV_ADDR 0x00020000 /* absolute address for now */
157#define CFG_ENV_SIZE 0x20000 /* 8K ouch, this may later be */
158
159/******************************************************************************
160 *
161 * CPU specific defines
162 *
163 ******************************************************************************/
164
165/*
166 * GPIO settings
167 *
168 * GPIO pin assignments
169 * GPIO Name Dir Out AF
170 * 0 NC
171 * 1 NC
172 * 2 SIRQ1 I
173 * 3 SIRQ2 I
174 * 4 SIRQ3 I
175 * 5 DMAACK1 O 0
176 * 6 DMAACK2 O 0
177 * 7 DMAACK3 O 0
178 * 8 TC1 O 0
179 * 9 TC2 O 0
180 * 10 TC3 O 0
181 * 11 nDMAEN O 1
182 * 12 AENCTRL O 0
183 * 13 PLDTC O 0
184 * 14 ETHIRQ I
185 * 15 NC
186 * 16 NC
187 * 17 NC
188 * 18 RDY I
189 * 19 DMASIO I
190 * 20 ETHIRQ NC
191 * 21 NC
192 * 22 PGMEN O 1 FIXME for debug only enable flash
193 * 23 NC
194 * 24 NC
195 * 25 NC
196 * 26 NC
197 * 27 NC
198 * 28 NC
199 * 29 NC
200 * 30 NC
201 * 31 NC
202 * 32 NC
203 * 33 NC
204 * 34 FFRXD I 01
205 * 35 FFCTS I 01
206 * 36 FFDCD I 01
207 * 37 FFDSR I 01
208 * 38 FFRI I 01
209 * 39 FFTXD O 1 10
210 * 40 FFDTR O 0 10
211 * 41 FFRTS O 0 10
212 * 42 RS232FOFF O 0 00
213 * 43 NC
214 * 44 NC
215 * 45 IRSL0 O 0
216 * 46 IRRX0 I 01
217 * 47 IRTX0 O 0 10
218 * 48 NC
219 * 49 nIOWE O 0
220 * 50 NC
221 * 51 NC
222 * 52 NC
223 * 53 NC
224 * 54 NC
225 * 55 NC
226 * 56 NC
227 * 57 NC
228 * 58 DKDIRQ I
229 * 59 NC
230 * 60 NC
231 * 61 NC
232 * 62 NC
233 * 63 NC
234 * 64 COMLED O 0
235 * 65 COMLED O 0
236 * 66 COMLED O 0
237 * 67 COMLED O 0
238 * 68 COMLED O 0
239 * 69 COMLED O 0
240 * 70 COMLED O 0
241 * 71 COMLED O 0
242 * 72 NC
243 * 73 NC
244 * 74 NC
245 * 75 NC
246 * 76 NC
247 * 77 NC
248 * 78 CSIO O 1
249 * 79 NC
250 * 80 CSETH O 1
251 *
252 * NOTE: All NC's are defined to be outputs
253 *
254 */
255/* Pin direction control */
256/* NOTE GPIO 0, 61, 62 are set for inputs due to CPLD SPAREs */
257#define CFG_GPDR0_VAL 0xfff3bf02
258#define CFG_GPDR1_VAL 0xfbffbf83
259#define CFG_GPDR2_VAL 0x0001ffff
260/* Set and Clear registers */
261#define CFG_GPSR0_VAL 0x00400800
262#define CFG_GPSR1_VAL 0x00000480
263#define CFG_GPSR2_VAL 0x00014000
264#define CFG_GPCR0_VAL 0x00000000
265#define CFG_GPCR1_VAL 0x00000000
266#define CFG_GPCR2_VAL 0x00000000
267/* Edge detect registers (these are set by the kernel) */
268#define CFG_GRER0_VAL 0x00000000
269#define CFG_GRER1_VAL 0x00000000
270#define CFG_GRER2_VAL 0x00000000
271#define CFG_GFER0_VAL 0x00000000
272#define CFG_GFER1_VAL 0x00000000
273#define CFG_GFER2_VAL 0x00000000
274/* Alternate function registers */
275#define CFG_GAFR0_L_VAL 0x00000000
276#define CFG_GAFR0_U_VAL 0x00000010
277#define CFG_GAFR1_L_VAL 0x900a9550
278#define CFG_GAFR1_U_VAL 0x00000008
279#define CFG_GAFR2_L_VAL 0x20000000
280#define CFG_GAFR2_U_VAL 0x00000002
281
282/*
283 * Clocks, power control and interrupts
284 */
285#define CFG_PSSR_VAL 0x00000020
286#define CFG_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */
287#define CFG_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */
288#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */
289
290/* FIXME
291 *
292 * RTC settings
293 * Watchdog
294 *
295 */
296
297/*
298 * Memory settings
299 *
300 * FIXME Can ethernet be burst read and/or write?? This is set for lubbock
301 * Verify timings on all
302 */
303#define CFG_MSC0_VAL 0x000023FA /* flash bank (cs0) */
304/*#define CFG_MSC1_VAL 0x00003549 / * SuperIO bank (cs2) */
305#define CFG_MSC1_VAL 0x0000354c /* SuperIO bank (cs2) */
306#define CFG_MSC2_VAL 0x00001224 /* Ethernet bank (cs4) */
307#ifdef REDBOOT_WAY
308#define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
309#define CFG_MDMRS_VAL 0x00000000
310#define CFG_MDREFR_VAL 0x00018018
311#else
312#define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */
313#define CFG_MDMRS_VAL 0x00000000
wdenk400558b2005-04-02 23:52:25 +0000314#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */
wdenkd9fd6ff2002-10-11 08:43:32 +0000315#endif
316
317/*
318 * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
319 */
320#define CFG_MECR_VAL 0x00000000
321#define CFG_MCMEM0_VAL 0x00010504
322#define CFG_MCMEM1_VAL 0x00010504
323#define CFG_MCATT0_VAL 0x00010504
324#define CFG_MCATT1_VAL 0x00010504
325#define CFG_MCIO0_VAL 0x00004715
326#define CFG_MCIO1_VAL 0x00004715
327
328/* Board specific defines */
329
330/* LED defines */
331#define YELLOW 0x03
332#define RED 0x02
333#define GREEN 0x01
334#define OFF 0x00
335#define LED_IRDA0 0
336#define LED_IRDA1 2
337#define LED_IRDA2 4
338#define LED_IRDA3 6
339#define CRADLE_LED_SET_REG GPSR2
340#define CRADLE_LED_CLR_REG GPCR2
341
342/* SuperIO defines */
343#define CRADLE_SIO_INDEX 0x2e
344#define CRADLE_SIO_DATA 0x2f
345
346/* IO defines */
347#define CRADLE_CPLD_PHYS 0x08000000
348#define CRADLE_SIO1_PHYS 0x08100000
349#define CRADLE_SIO2_PHYS 0x08200000
350#define CRADLE_SIO3_PHYS 0x08300000
351#define CRADLE_ETH_PHYS 0x10000000
352
353#ifndef __ASSEMBLY__
354
355/* global prototypes */
356void led_code(int code, int color);
357
358#endif
359
360#endif /* __CONFIG_H */