Thomas Gleixner | 6f4e7d3 | 2016-07-12 20:28:12 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) Thomas Gleixner <tglx@linutronix.de> |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL 2.0+ BSD-3-Clause |
| 5 | */ |
| 6 | |
| 7 | #ifndef _UBOOT_MTD_UBISPL_H |
| 8 | #define _UBOOT_MTD_UBISPL_H |
| 9 | |
| 10 | #include "../ubi/ubi-media.h" |
| 11 | #include "ubi-wrapper.h" |
| 12 | |
| 13 | /* |
| 14 | * The maximum number of volume ids we scan. So you can load volume id |
| 15 | * 0 to (CONFIG_SPL_UBI_VOL_ID_MAX - 1) |
| 16 | */ |
| 17 | #define UBI_SPL_VOL_IDS CONFIG_SPL_UBI_VOL_IDS |
| 18 | /* |
| 19 | * The size of the read buffer for the fastmap blocks. In theory up to |
| 20 | * UBI_FM_MAX_BLOCKS * CONFIG_SPL_MAX_PEB_SIZE. In practice today |
| 21 | * one or two blocks. |
| 22 | */ |
| 23 | #define UBI_FM_BUF_SIZE (UBI_FM_MAX_BLOCKS*CONFIG_SPL_UBI_MAX_PEB_SIZE) |
| 24 | /* |
| 25 | * The size of the bitmaps for the attach/ scan |
| 26 | */ |
| 27 | #define UBI_FM_BM_SIZE ((CONFIG_SPL_UBI_MAX_PEBS / BITS_PER_LONG) + 1) |
| 28 | /* |
| 29 | * The maximum number of logical erase blocks per loadable volume |
| 30 | */ |
| 31 | #define UBI_MAX_VOL_LEBS CONFIG_SPL_UBI_MAX_VOL_LEBS |
| 32 | /* |
| 33 | * The bitmap size for the above to denote the found blocks inside the volume |
| 34 | */ |
| 35 | #define UBI_VOL_BM_SIZE ((UBI_MAX_VOL_LEBS / BITS_PER_LONG) + 1) |
| 36 | |
| 37 | /** |
| 38 | * struct ubi_vol_info - UBISPL internal volume represenation |
| 39 | * @last_block: The last block (highest LEB) found for this volume |
| 40 | * @found: Bitmap to mark found LEBS |
| 41 | * @lebs_to_pebs: LEB to PEB translation table |
| 42 | */ |
| 43 | struct ubi_vol_info { |
| 44 | u32 last_block; |
| 45 | unsigned long found[UBI_VOL_BM_SIZE]; |
| 46 | u32 lebs_to_pebs[UBI_MAX_VOL_LEBS]; |
| 47 | }; |
| 48 | |
| 49 | /** |
| 50 | * struct ubi_scan_info - UBISPL internal data for FM attach and full scan |
| 51 | * |
| 52 | * @read: Read function to access the flash provided by the caller |
| 53 | * @peb_count: Number of physical erase blocks in the UBI FLASH area |
| 54 | * aka MTD partition. |
| 55 | * @peb_offset: Offset of PEB0 in the UBI FLASH area (aka MTD partition) |
| 56 | * to the real start of the FLASH in erase blocks. |
| 57 | * @fsize_mb: Size of the scanned FLASH area in MB (stats only) |
| 58 | * @vid_offset: Offset from the start of a PEB to the VID header |
| 59 | * @leb_start: Offset from the start of a PEB to the data area |
| 60 | * @leb_size: Size of the data area |
| 61 | * |
| 62 | * @fastmap_pebs: Counter of PEBs "attached" by fastmap |
| 63 | * @fastmap_anchor: The anchor PEB of the fastmap |
| 64 | * @fm_sb: The fastmap super block data |
| 65 | * @fm_vh: The fastmap VID header |
| 66 | * @fm: Pointer to the fastmap layout |
| 67 | * @fm_layout: The fastmap layout itself |
| 68 | * @fm_pool: The pool of PEBs to scan at fastmap attach time |
| 69 | * @fm_wl_pool: The pool of PEBs scheduled for wearleveling |
| 70 | * |
| 71 | * @fm_enabled: Indicator whether fastmap attachment is enabled. |
| 72 | * @fm_used: Bitmap to indicate the PEBS covered by fastmap |
| 73 | * @scanned: Bitmap to indicate the PEBS of which the VID header |
| 74 | * hase been physically scanned. |
| 75 | * @corrupt: Bitmap to indicate corrupt blocks |
| 76 | * @toload: Bitmap to indicate the volumes which should be loaded |
| 77 | * |
| 78 | * @blockinfo: The vid headers of the scanned blocks |
| 79 | * @volinfo: The volume information of the interesting (toload) |
| 80 | * volumes |
| 81 | * |
| 82 | * @fm_buf: The large fastmap attach buffer |
| 83 | */ |
| 84 | struct ubi_scan_info { |
| 85 | ubispl_read_flash read; |
| 86 | unsigned int fsize_mb; |
| 87 | unsigned int peb_count; |
| 88 | unsigned int peb_offset; |
| 89 | |
| 90 | unsigned long vid_offset; |
| 91 | unsigned long leb_start; |
| 92 | unsigned long leb_size; |
| 93 | |
| 94 | /* Fastmap: The upstream required fields */ |
| 95 | int fastmap_pebs; |
| 96 | int fastmap_anchor; |
| 97 | size_t fm_size; |
| 98 | struct ubi_fm_sb fm_sb; |
| 99 | struct ubi_vid_hdr fm_vh; |
| 100 | struct ubi_fastmap_layout *fm; |
| 101 | struct ubi_fastmap_layout fm_layout; |
| 102 | struct ubi_fm_pool fm_pool; |
| 103 | struct ubi_fm_pool fm_wl_pool; |
| 104 | |
| 105 | /* Fastmap: UBISPL specific data */ |
| 106 | int fm_enabled; |
| 107 | unsigned long fm_used[UBI_FM_BM_SIZE]; |
| 108 | unsigned long scanned[UBI_FM_BM_SIZE]; |
| 109 | unsigned long corrupt[UBI_FM_BM_SIZE]; |
| 110 | unsigned long toload[UBI_FM_BM_SIZE]; |
| 111 | |
| 112 | /* Data for storing the VID and volume information */ |
| 113 | struct ubi_vol_info volinfo[UBI_SPL_VOL_IDS]; |
| 114 | struct ubi_vid_hdr blockinfo[CONFIG_SPL_UBI_MAX_PEBS]; |
| 115 | |
| 116 | /* The large buffer for the fastmap */ |
| 117 | uint8_t fm_buf[UBI_FM_BUF_SIZE]; |
| 118 | }; |
| 119 | |
| 120 | #ifdef CFG_DEBUG |
| 121 | #define ubi_dbg(fmt, ...) printf("UBI: debug:" fmt "\n", ##__VA_ARGS__) |
| 122 | #else |
| 123 | #define ubi_dbg(fmt, ...) |
| 124 | #endif |
| 125 | |
| 126 | #ifdef CONFIG_UBI_SILENCE_MSG |
| 127 | #define ubi_msg(fmt, ...) |
| 128 | #else |
| 129 | #define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__) |
| 130 | #endif |
| 131 | /* UBI warning messages */ |
| 132 | #define ubi_warn(fmt, ...) printf("UBI warning: " fmt "\n", ##__VA_ARGS__) |
| 133 | /* UBI error messages */ |
| 134 | #define ubi_err(fmt, ...) printf("UBI error: " fmt "\n", ##__VA_ARGS__) |
| 135 | |
| 136 | #endif |