blob: 379e6c79b8e4f93207e05728436c27f9cf81d724 [file] [log] [blame]
Stefanbfacf462011-12-23 06:35:04 +00001/*
2 * Copyright (C) 2011
Stefan Herbrechtsmeier16437a12014-12-28 14:09:50 +01003 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Stefanbfacf462011-12-23 06:35:04 +00004 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefanbfacf462011-12-23 06:35:04 +000011 */
12
13#ifndef _CONFIG_DNS325_H
14#define _CONFIG_DNS325_H
15
16/*
17 * Machine number definition
18 */
19#define MACH_TYPE_DNS325 3800
20#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
21#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
22
23/*
24 * High Level Configuration Options (easy to change)
25 */
26#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
Stefanbfacf462011-12-23 06:35:04 +000027#define CONFIG_KW88F6281 /* SOC Name */
28#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
Stefan Herbrechtsmeierf5d8d6e2014-12-28 14:09:51 +010029#define CONFIG_SYS_GENERIC_BOARD
Stefanbfacf462011-12-23 06:35:04 +000030
31/*
32 * Commands configuration
33 */
34#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
35#include <config_cmd_default.h>
36#define CONFIG_CMD_DHCP
37#define CONFIG_CMD_ENV
38#define CONFIG_CMD_NAND
39#define CONFIG_CMD_PING
40#define CONFIG_CMD_USB
41#define CONFIG_CMD_IDE
42#define CONFIG_CMD_DATE
43#define CONFIG_SYS_MVFS
44
45#define CONFIG_NR_DRAM_BANKS 1
46
47/*
48 * mv-common.h should be defined after CMD configs since it used them
49 * to enable certain macros
50 */
51#include "mv-common.h"
52
53/* Remove or override few declarations from mv-common.h */
54#undef CONFIG_SYS_PROMPT
Stefanbfacf462011-12-23 06:35:04 +000055
56/*
57 * Ethernet Driver configuration
58 */
59#ifdef CONFIG_CMD_NET
60#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
61#define CONFIG_NETCONSOLE
62#endif
63
64/*
65 * SATA Driver configuration
66 */
67#ifdef CONFIG_MVSATA_IDE
68#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
69#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
70#endif
71
72/*
73 * RTC driver configuration
74 */
75#ifdef CONFIG_CMD_DATE
76#define CONFIG_RTC_MV
77#endif
78
79/*
80 * Enable GPI0 support
81 */
82#define CONFIG_KIRKWOOD_GPIO
83
84/*
85 * Use the HUSH parser
86 */
87#define CONFIG_SYS_HUSH_PARSER
Stefanbfacf462011-12-23 06:35:04 +000088
89/*
90 * Console configuration
91 */
92#define CONFIG_CONSOLE_MUX
93#define CONFIG_SYS_CONSOLE_IS_IN_ENV
94
95/*
96 * Enable device tree support
97 */
98#define CONFIG_OF_LIBFDT
99
100/*
101 * Display cpu info at boot
102 */
103#define CONFIG_DISPLAY_CPUINFO
104
105/*
106 * Environment variables configurations
107 */
108#ifdef CONFIG_CMD_NAND
109#define CONFIG_ENV_IS_IN_NAND
110#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
111#else
112#define CONFIG_ENV_IS_NOWHERE
113#endif
114
115#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
116#define CONFIG_ENV_ADDR 0xe0000
117#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
118
119/*
120 * Default environment variables
121 */
122#define MTDIDS_DEFAULT "nand0=orion_nand"
123
124#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
125 "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
126
127#define CONFIG_EXTRA_ENV_SETTINGS \
128 "stdin=serial\0" \
129 "stdout=serial\0" \
130 "stderr=serial\0" \
131 "loadaddr=0x800000\0" \
132 "autoload=no\0" \
133 "console=ttyS0,115200\0" \
134 "mtdparts="MTDPARTS_DEFAULT \
135 "optargs=\0" \
136 "bootenv=uEnv.txt\0" \
137 "importbootenv=echo Importing environment ...; " \
138 "env import -t ${loadaddr} ${filesize}\0" \
139 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
140 "setbootargs=setenv bootargs console=${console} " \
141 "${optargs} " \
142 "${mtdparts} " \
143 "root=${bootenvroot} " \
144 "rootfstype=${bootenvrootfstype}\0" \
145 "subbootcmd=run setbootargs; " \
146 "if run bootenvloadimage; then " \
147 "bootm ${loadaddr};" \
148 "fi;\0" \
149 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
150 "nandrootfstype=ubifs\0" \
151 "nandloadimage=nand read ${loadaddr} kernel\0" \
152 "setnandbootenv=echo Booting from nand ...; " \
153 "setenv bootenvroot ${nandroot}; " \
154 "setenv bootenvrootfstype ${nandrootfstype}; " \
155 "setenv bootenvloadimage ${nandloadimage}\0"
156
157#define CONFIG_BOOTCOMMAND \
158 "if test -n ${bootenv} && usb start; then " \
159 "if run loadbootenv; then " \
160 "echo Loaded environment ${bootenv} from usb;" \
161 "run importbootenv;" \
162 "fi;" \
163 "if test -n ${bootenvcmd}; then " \
164 "echo Running bootenvcmd ...;" \
165 "run bootenvcmd;" \
166 "fi;" \
167 "fi;" \
168 "run setnandbootenv subbootcmd;"
169
170#endif /* _CONFIG_DNS325_H */