blob: e9b461a99a935775c8b59e19e8f4a63c49d1e3e5 [file] [log] [blame]
Donghwa Leed2a69822012-07-02 01:16:02 +00001/*
2 * Copyright (C) 2012 Samsung Electronics
3 *
4 * Author: Donghwa Lee <dh09.lee@samsung.com>
5 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02006 * SPDX-License-Identifier: GPL-2.0+
Donghwa Leed2a69822012-07-02 01:16:02 +00007 */
8
9#include <config.h>
10#include <common.h>
11#include <linux/err.h>
12#include <asm/arch/cpu.h>
13#include <asm/arch/dp_info.h>
14#include <asm/arch/dp.h>
Ajay Kumar9947d132013-02-21 23:53:06 +000015#include <fdtdec.h>
16#include <libfdt.h>
17
18/* Declare global data pointer */
19DECLARE_GLOBAL_DATA_PTR;
Donghwa Leed2a69822012-07-02 01:16:02 +000020
Ajay Kumarbeded3d2013-02-21 23:53:04 +000021struct exynos_dp *dp_regs;
22
23void exynos_dp_set_base_addr(void)
24{
Masahiro Yamada0f925822015-08-12 07:31:55 +090025#if CONFIG_IS_ENABLED(OF_CONTROL)
Ajay Kumar9947d132013-02-21 23:53:06 +000026 unsigned int node = fdtdec_next_compatible(gd->fdt_blob,
27 0, COMPAT_SAMSUNG_EXYNOS5_DP);
28 if (node <= 0)
29 debug("exynos_dp: Can't get device node for dp\n");
30
31 dp_regs = (struct exynos_dp *)fdtdec_get_addr(gd->fdt_blob,
32 node, "reg");
33 if (dp_regs == NULL)
34 debug("Can't get the DP base address\n");
35#else
Ajay Kumarbeded3d2013-02-21 23:53:04 +000036 dp_regs = (struct exynos_dp *)samsung_get_base_dp();
Ajay Kumar9947d132013-02-21 23:53:06 +000037#endif
Ajay Kumarbeded3d2013-02-21 23:53:04 +000038}
39
Donghwa Leed2a69822012-07-02 01:16:02 +000040static void exynos_dp_enable_video_input(unsigned int enable)
41{
42 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +000043
44 reg = readl(&dp_regs->video_ctl1);
45 reg &= ~VIDEO_EN_MASK;
46
47 /* enable video input*/
48 if (enable)
49 reg |= VIDEO_EN_MASK;
50
51 writel(reg, &dp_regs->video_ctl1);
52
53 return;
54}
55
56void exynos_dp_enable_video_bist(unsigned int enable)
57{
58 /*enable video bist*/
59 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +000060
61 reg = readl(&dp_regs->video_ctl4);
62 reg &= ~VIDEO_BIST_MASK;
63
64 /*enable video bist*/
65 if (enable)
66 reg |= VIDEO_BIST_MASK;
67
68 writel(reg, &dp_regs->video_ctl4);
69
70 return;
71}
72
73void exynos_dp_enable_video_mute(unsigned int enable)
74{
75 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +000076
77 reg = readl(&dp_regs->video_ctl1);
78 reg &= ~(VIDEO_MUTE_MASK);
79 if (enable)
80 reg |= VIDEO_MUTE_MASK;
81
82 writel(reg, &dp_regs->video_ctl1);
83
84 return;
85}
86
87
88static void exynos_dp_init_analog_param(void)
89{
90 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +000091
92 /*
93 * Set termination
94 * Normal bandgap, Normal swing, Tx terminal registor 61 ohm
95 * 24M Phy clock, TX digital logic power is 100:1.0625V
96 */
97 reg = SEL_BG_NEW_BANDGAP | TX_TERMINAL_CTRL_61_OHM |
98 SWING_A_30PER_G_NORMAL;
99 writel(reg, &dp_regs->analog_ctl1);
100
101 reg = SEL_24M | TX_DVDD_BIT_1_0625V;
102 writel(reg, &dp_regs->analog_ctl2);
103
104 /*
105 * Set power source for internal clk driver to 1.0625v.
106 * Select current reference of TX driver current to 00:Ipp/2+Ic/2.
107 * Set VCO range of PLL +- 0uA
108 */
109 reg = DRIVE_DVDD_BIT_1_0625V | SEL_CURRENT_DEFAULT | VCO_BIT_000_MICRO;
110 writel(reg, &dp_regs->analog_ctl3);
111
112 /*
113 * Set AUX TX terminal resistor to 102 ohm
114 * Set AUX channel amplitude control
115 */
116 reg = PD_RING_OSC | AUX_TERMINAL_CTRL_52_OHM | TX_CUR1_2X | TX_CUR_4_MA;
117 writel(reg, &dp_regs->pll_filter_ctl1);
118
119 /*
120 * PLL loop filter bandwidth
121 * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz
122 * PLL digital power select: 1.2500V
123 */
124 reg = CH3_AMP_0_MV | CH2_AMP_0_MV | CH1_AMP_0_MV | CH0_AMP_0_MV;
125
126 writel(reg, &dp_regs->amp_tuning_ctl);
127
128 /*
129 * PLL loop filter bandwidth
130 * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz
131 * PLL digital power select: 1.1250V
132 */
133 reg = DP_PLL_LOOP_BIT_DEFAULT | DP_PLL_REF_BIT_1_1250V;
134 writel(reg, &dp_regs->pll_ctl);
135}
136
137static void exynos_dp_init_interrupt(void)
138{
Donghwa Leed2a69822012-07-02 01:16:02 +0000139 /* Set interrupt registers to initial states */
140
141 /*
142 * Disable interrupt
143 * INT pin assertion polarity. It must be configured
144 * correctly according to ICU setting.
145 * 1 = assert high, 0 = assert low
146 */
147 writel(INT_POL, &dp_regs->int_ctl);
148
149 /* Clear pending regisers */
150 writel(0xff, &dp_regs->common_int_sta1);
151 writel(0xff, &dp_regs->common_int_sta2);
152 writel(0xff, &dp_regs->common_int_sta3);
153 writel(0xff, &dp_regs->common_int_sta4);
154 writel(0xff, &dp_regs->int_sta);
155
156 /* 0:mask,1: unmask */
157 writel(0x00, &dp_regs->int_sta_mask1);
158 writel(0x00, &dp_regs->int_sta_mask2);
159 writel(0x00, &dp_regs->int_sta_mask3);
160 writel(0x00, &dp_regs->int_sta_mask4);
161 writel(0x00, &dp_regs->int_sta_mask);
162}
163
164void exynos_dp_reset(void)
165{
166 unsigned int reg_func_1;
Donghwa Leed2a69822012-07-02 01:16:02 +0000167
168 /*dp tx sw reset*/
169 writel(RESET_DP_TX, &dp_regs->tx_sw_reset);
170
171 exynos_dp_enable_video_input(DP_DISABLE);
172 exynos_dp_enable_video_bist(DP_DISABLE);
173 exynos_dp_enable_video_mute(DP_DISABLE);
174
175 /* software reset */
176 reg_func_1 = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
177 AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
178 HDCP_FUNC_EN_N | SW_FUNC_EN_N;
179
180 writel(reg_func_1, &dp_regs->func_en1);
181 writel(reg_func_1, &dp_regs->func_en2);
182
183 mdelay(1);
184
185 exynos_dp_init_analog_param();
186 exynos_dp_init_interrupt();
187
188 return;
189}
190
191void exynos_dp_enable_sw_func(unsigned int enable)
192{
193 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000194
195 reg = readl(&dp_regs->func_en1);
196 reg &= ~(SW_FUNC_EN_N);
197
198 if (!enable)
199 reg |= SW_FUNC_EN_N;
200
201 writel(reg, &dp_regs->func_en1);
202
203 return;
204}
205
206unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable)
207{
208 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000209
210 reg = readl(&dp_regs->phy_pd);
211 switch (block) {
212 case AUX_BLOCK:
213 reg &= ~(AUX_PD);
214 if (enable)
215 reg |= AUX_PD;
216 break;
217 case CH0_BLOCK:
218 reg &= ~(CH0_PD);
219 if (enable)
220 reg |= CH0_PD;
221 break;
222 case CH1_BLOCK:
223 reg &= ~(CH1_PD);
224 if (enable)
225 reg |= CH1_PD;
226 break;
227 case CH2_BLOCK:
228 reg &= ~(CH2_PD);
229 if (enable)
230 reg |= CH2_PD;
231 break;
232 case CH3_BLOCK:
233 reg &= ~(CH3_PD);
234 if (enable)
235 reg |= CH3_PD;
236 break;
237 case ANALOG_TOTAL:
238 reg &= ~PHY_PD;
239 if (enable)
240 reg |= PHY_PD;
241 break;
242 case POWER_ALL:
243 reg &= ~(PHY_PD | AUX_PD | CH0_PD | CH1_PD | CH2_PD |
244 CH3_PD);
245 if (enable)
246 reg |= (PHY_PD | AUX_PD | CH0_PD | CH1_PD |
247 CH2_PD | CH3_PD);
248 break;
249 default:
250 printf("DP undefined block number : %d\n", block);
251 return -1;
252 }
253
254 writel(reg, &dp_regs->phy_pd);
255
256 return 0;
257}
258
259unsigned int exynos_dp_get_pll_lock_status(void)
260{
261 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000262
263 reg = readl(&dp_regs->debug_ctl);
264
265 if (reg & PLL_LOCK)
266 return PLL_LOCKED;
267 else
268 return PLL_UNLOCKED;
269}
270
271static void exynos_dp_set_pll_power(unsigned int enable)
272{
273 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000274
275 reg = readl(&dp_regs->pll_ctl);
276 reg &= ~(DP_PLL_PD);
277
278 if (!enable)
279 reg |= DP_PLL_PD;
280
281 writel(reg, &dp_regs->pll_ctl);
282}
283
284int exynos_dp_init_analog_func(void)
285{
286 int ret = EXYNOS_DP_SUCCESS;
287 unsigned int retry_cnt = 10;
288 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000289
290 /*Power On All Analog block */
291 exynos_dp_set_analog_power_down(POWER_ALL, DP_DISABLE);
292
293 reg = PLL_LOCK_CHG;
294 writel(reg, &dp_regs->common_int_sta1);
295
296 reg = readl(&dp_regs->debug_ctl);
297 reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
298 writel(reg, &dp_regs->debug_ctl);
299
300 /*Assert DP PLL Reset*/
301 reg = readl(&dp_regs->pll_ctl);
302 reg |= DP_PLL_RESET;
303 writel(reg, &dp_regs->pll_ctl);
304
305 mdelay(1);
306
307 /*Deassert DP PLL Reset*/
308 reg = readl(&dp_regs->pll_ctl);
309 reg &= ~(DP_PLL_RESET);
310 writel(reg, &dp_regs->pll_ctl);
311
312 exynos_dp_set_pll_power(DP_ENABLE);
313
314 while (exynos_dp_get_pll_lock_status() == PLL_UNLOCKED) {
315 mdelay(1);
316 retry_cnt--;
317 if (retry_cnt == 0) {
318 printf("DP dp's pll lock failed : retry : %d\n",
319 retry_cnt);
320 return -EINVAL;
321 }
322 }
323
324 debug("dp's pll lock success(%d)\n", retry_cnt);
325
326 /* Enable Serdes FIFO function and Link symbol clock domain module */
327 reg = readl(&dp_regs->func_en2);
328 reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
329 | AUX_FUNC_EN_N);
330 writel(reg, &dp_regs->func_en2);
331
332 return ret;
333}
334
335void exynos_dp_init_hpd(void)
336{
337 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000338
339 /* Clear interrupts releated to Hot Plug Dectect */
340 reg = HOTPLUG_CHG | HPD_LOST | PLUG;
341 writel(reg, &dp_regs->common_int_sta4);
342
343 reg = INT_HPD;
344 writel(reg, &dp_regs->int_sta);
345
346 reg = readl(&dp_regs->sys_ctl3);
347 reg &= ~(F_HPD | HPD_CTRL);
348 writel(reg, &dp_regs->sys_ctl3);
349
350 return;
351}
352
353static inline void exynos_dp_reset_aux(void)
354{
355 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000356
357 /* Disable AUX channel module */
358 reg = readl(&dp_regs->func_en2);
359 reg |= AUX_FUNC_EN_N;
360 writel(reg, &dp_regs->func_en2);
361
362 return;
363}
364
365void exynos_dp_init_aux(void)
366{
367 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000368
369 /* Clear inerrupts related to AUX channel */
370 reg = RPLY_RECEIV | AUX_ERR;
371 writel(reg, &dp_regs->int_sta);
372
373 exynos_dp_reset_aux();
374
375 /* Disable AUX transaction H/W retry */
376 reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(3)|
377 AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
378 writel(reg, &dp_regs->aux_hw_retry_ctl);
379
380 /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
381 reg = DEFER_CTRL_EN | DEFER_COUNT(1);
382 writel(reg, &dp_regs->aux_ch_defer_ctl);
383
384 /* Enable AUX channel module */
385 reg = readl(&dp_regs->func_en2);
386 reg &= ~AUX_FUNC_EN_N;
387 writel(reg, &dp_regs->func_en2);
388
389 return;
390}
391
392void exynos_dp_config_interrupt(void)
393{
394 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000395
396 /* 0: mask, 1: unmask */
397 reg = COMMON_INT_MASK_1;
398 writel(reg, &dp_regs->common_int_mask1);
399
400 reg = COMMON_INT_MASK_2;
401 writel(reg, &dp_regs->common_int_mask2);
402
403 reg = COMMON_INT_MASK_3;
404 writel(reg, &dp_regs->common_int_mask3);
405
406 reg = COMMON_INT_MASK_4;
407 writel(reg, &dp_regs->common_int_mask4);
408
409 reg = INT_STA_MASK;
410 writel(reg, &dp_regs->int_sta_mask);
411
412 return;
413}
414
415unsigned int exynos_dp_get_plug_in_status(void)
416{
417 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000418
419 reg = readl(&dp_regs->sys_ctl3);
420 if (reg & HPD_STATUS)
421 return 0;
422
423 return -1;
424}
425
426unsigned int exynos_dp_detect_hpd(void)
427{
428 int timeout_loop = DP_TIMEOUT_LOOP_COUNT;
429
430 mdelay(2);
431
432 while (exynos_dp_get_plug_in_status() != 0) {
433 if (timeout_loop == 0)
434 return -EINVAL;
435 mdelay(10);
436 timeout_loop--;
437 }
438
439 return EXYNOS_DP_SUCCESS;
440}
441
442unsigned int exynos_dp_start_aux_transaction(void)
443{
444 unsigned int reg;
445 unsigned int ret = 0;
446 unsigned int retry_cnt;
Donghwa Leed2a69822012-07-02 01:16:02 +0000447
448 /* Enable AUX CH operation */
449 reg = readl(&dp_regs->aux_ch_ctl2);
450 reg |= AUX_EN;
451 writel(reg, &dp_regs->aux_ch_ctl2);
452
453 retry_cnt = 10;
454 while (retry_cnt) {
455 reg = readl(&dp_regs->int_sta);
456 if (!(reg & RPLY_RECEIV)) {
457 if (retry_cnt == 0) {
458 printf("DP Reply Timeout!!\n");
459 ret = -EAGAIN;
460 return ret;
461 }
462 mdelay(1);
463 retry_cnt--;
464 } else
465 break;
466 }
467
468 /* Clear interrupt source for AUX CH command reply */
469 writel(reg, &dp_regs->int_sta);
470
471 /* Clear interrupt source for AUX CH access error */
472 reg = readl(&dp_regs->int_sta);
473 if (reg & AUX_ERR) {
474 printf("DP Aux Access Error\n");
475 writel(AUX_ERR, &dp_regs->int_sta);
476 ret = -EAGAIN;
477 return ret;
478 }
479
480 /* Check AUX CH error access status */
481 reg = readl(&dp_regs->aux_ch_sta);
482 if ((reg & AUX_STATUS_MASK) != 0) {
483 debug("DP AUX CH error happens: %x\n", reg & AUX_STATUS_MASK);
484 ret = -EAGAIN;
485 return ret;
486 }
487
488 return EXYNOS_DP_SUCCESS;
489}
490
491unsigned int exynos_dp_write_byte_to_dpcd(unsigned int reg_addr,
492 unsigned char data)
493{
494 unsigned int reg, ret;
Donghwa Leed2a69822012-07-02 01:16:02 +0000495
496 /* Clear AUX CH data buffer */
497 reg = BUF_CLR;
498 writel(reg, &dp_regs->buffer_data_ctl);
499
500 /* Select DPCD device address */
501 reg = AUX_ADDR_7_0(reg_addr);
502 writel(reg, &dp_regs->aux_addr_7_0);
503 reg = AUX_ADDR_15_8(reg_addr);
504 writel(reg, &dp_regs->aux_addr_15_8);
505 reg = AUX_ADDR_19_16(reg_addr);
506 writel(reg, &dp_regs->aux_addr_19_16);
507
508 /* Write data buffer */
509 reg = (unsigned int)data;
510 writel(reg, &dp_regs->buf_data0);
511
512 /*
513 * Set DisplayPort transaction and write 1 byte
514 * If bit 3 is 1, DisplayPort transaction.
515 * If Bit 3 is 0, I2C transaction.
516 */
517 reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
518 writel(reg, &dp_regs->aux_ch_ctl1);
519
520 /* Start AUX transaction */
521 ret = exynos_dp_start_aux_transaction();
522 if (ret != EXYNOS_DP_SUCCESS) {
523 printf("DP Aux transaction failed\n");
524 return ret;
525 }
526
527 return ret;
528}
529
530unsigned int exynos_dp_read_byte_from_dpcd(unsigned int reg_addr,
531 unsigned char *data)
532{
533 unsigned int reg;
534 int retval;
Donghwa Leed2a69822012-07-02 01:16:02 +0000535
536 /* Clear AUX CH data buffer */
537 reg = BUF_CLR;
538 writel(reg, &dp_regs->buffer_data_ctl);
539
540 /* Select DPCD device address */
541 reg = AUX_ADDR_7_0(reg_addr);
542 writel(reg, &dp_regs->aux_addr_7_0);
543 reg = AUX_ADDR_15_8(reg_addr);
544 writel(reg, &dp_regs->aux_addr_15_8);
545 reg = AUX_ADDR_19_16(reg_addr);
546 writel(reg, &dp_regs->aux_addr_19_16);
547
548 /*
549 * Set DisplayPort transaction and read 1 byte
550 * If bit 3 is 1, DisplayPort transaction.
551 * If Bit 3 is 0, I2C transaction.
552 */
553 reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
554 writel(reg, &dp_regs->aux_ch_ctl1);
555
556 /* Start AUX transaction */
557 retval = exynos_dp_start_aux_transaction();
558 if (!retval)
559 debug("DP Aux Transaction fail!\n");
560
561 /* Read data buffer */
562 reg = readl(&dp_regs->buf_data0);
563 *data = (unsigned char)(reg & 0xff);
564
565 return retval;
566}
567
568unsigned int exynos_dp_write_bytes_to_dpcd(unsigned int reg_addr,
569 unsigned int count,
570 unsigned char data[])
571{
572 unsigned int reg;
573 unsigned int start_offset;
574 unsigned int cur_data_count;
575 unsigned int cur_data_idx;
576 unsigned int retry_cnt;
577 unsigned int ret = 0;
Donghwa Leed2a69822012-07-02 01:16:02 +0000578
579 /* Clear AUX CH data buffer */
580 reg = BUF_CLR;
581 writel(reg, &dp_regs->buffer_data_ctl);
582
583 start_offset = 0;
584 while (start_offset < count) {
585 /* Buffer size of AUX CH is 16 * 4bytes */
586 if ((count - start_offset) > 16)
587 cur_data_count = 16;
588 else
589 cur_data_count = count - start_offset;
590
591 retry_cnt = 5;
592 while (retry_cnt) {
593 /* Select DPCD device address */
594 reg = AUX_ADDR_7_0(reg_addr + start_offset);
595 writel(reg, &dp_regs->aux_addr_7_0);
596 reg = AUX_ADDR_15_8(reg_addr + start_offset);
597 writel(reg, &dp_regs->aux_addr_15_8);
598 reg = AUX_ADDR_19_16(reg_addr + start_offset);
599 writel(reg, &dp_regs->aux_addr_19_16);
600
601 for (cur_data_idx = 0; cur_data_idx < cur_data_count;
602 cur_data_idx++) {
603 reg = data[start_offset + cur_data_idx];
604 writel(reg, (unsigned int)&dp_regs->buf_data0 +
605 (4 * cur_data_idx));
606 }
607 /*
608 * Set DisplayPort transaction and write
609 * If bit 3 is 1, DisplayPort transaction.
610 * If Bit 3 is 0, I2C transaction.
611 */
612 reg = AUX_LENGTH(cur_data_count) |
613 AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
614 writel(reg, &dp_regs->aux_ch_ctl1);
615
616 /* Start AUX transaction */
617 ret = exynos_dp_start_aux_transaction();
618 if (ret != EXYNOS_DP_SUCCESS) {
619 if (retry_cnt == 0) {
620 printf("DP Aux Transaction failed\n");
621 return ret;
622 }
623 retry_cnt--;
624 } else
625 break;
626 }
627 start_offset += cur_data_count;
628 }
629
630 return ret;
631}
632
633unsigned int exynos_dp_read_bytes_from_dpcd(unsigned int reg_addr,
634 unsigned int count,
635 unsigned char data[])
636{
637 unsigned int reg;
638 unsigned int start_offset;
639 unsigned int cur_data_count;
640 unsigned int cur_data_idx;
641 unsigned int retry_cnt;
642 unsigned int ret = 0;
Donghwa Leed2a69822012-07-02 01:16:02 +0000643
644 /* Clear AUX CH data buffer */
645 reg = BUF_CLR;
646 writel(reg, &dp_regs->buffer_data_ctl);
647
648 start_offset = 0;
649 while (start_offset < count) {
650 /* Buffer size of AUX CH is 16 * 4bytes */
651 if ((count - start_offset) > 16)
652 cur_data_count = 16;
653 else
654 cur_data_count = count - start_offset;
655
656 retry_cnt = 5;
657 while (retry_cnt) {
658 /* Select DPCD device address */
659 reg = AUX_ADDR_7_0(reg_addr + start_offset);
660 writel(reg, &dp_regs->aux_addr_7_0);
661 reg = AUX_ADDR_15_8(reg_addr + start_offset);
662 writel(reg, &dp_regs->aux_addr_15_8);
663 reg = AUX_ADDR_19_16(reg_addr + start_offset);
664 writel(reg, &dp_regs->aux_addr_19_16);
665 /*
666 * Set DisplayPort transaction and read
667 * If bit 3 is 1, DisplayPort transaction.
668 * If Bit 3 is 0, I2C transaction.
669 */
670 reg = AUX_LENGTH(cur_data_count) |
671 AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
672 writel(reg, &dp_regs->aux_ch_ctl1);
673
674 /* Start AUX transaction */
675 ret = exynos_dp_start_aux_transaction();
676 if (ret != EXYNOS_DP_SUCCESS) {
677 if (retry_cnt == 0) {
678 printf("DP Aux Transaction failed\n");
679 return ret;
680 }
681 retry_cnt--;
682 } else
683 break;
684 }
685
686 for (cur_data_idx = 0; cur_data_idx < cur_data_count;
687 cur_data_idx++) {
688 reg = readl((unsigned int)&dp_regs->buf_data0 +
689 4 * cur_data_idx);
690 data[start_offset + cur_data_idx] = (unsigned char)reg;
691 }
692
693 start_offset += cur_data_count;
694 }
695
696 return ret;
697}
698
699int exynos_dp_select_i2c_device(unsigned int device_addr,
700 unsigned int reg_addr)
701{
702 unsigned int reg;
703 int retval;
Donghwa Leed2a69822012-07-02 01:16:02 +0000704
705 /* Set EDID device address */
706 reg = device_addr;
707 writel(reg, &dp_regs->aux_addr_7_0);
708 writel(0x0, &dp_regs->aux_addr_15_8);
709 writel(0x0, &dp_regs->aux_addr_19_16);
710
711 /* Set offset from base address of EDID device */
712 writel(reg_addr, &dp_regs->buf_data0);
713
714 /*
715 * Set I2C transaction and write address
716 * If bit 3 is 1, DisplayPort transaction.
717 * If Bit 3 is 0, I2C transaction.
718 */
719 reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
720 AUX_TX_COMM_WRITE;
721 writel(reg, &dp_regs->aux_ch_ctl1);
722
723 /* Start AUX transaction */
724 retval = exynos_dp_start_aux_transaction();
725 if (retval != 0)
726 printf("%s: DP Aux Transaction fail!\n", __func__);
727
728 return retval;
729}
730
731int exynos_dp_read_byte_from_i2c(unsigned int device_addr,
732 unsigned int reg_addr,
733 unsigned int *data)
734{
735 unsigned int reg;
736 int i;
737 int retval;
Donghwa Leed2a69822012-07-02 01:16:02 +0000738
739 for (i = 0; i < 10; i++) {
740 /* Clear AUX CH data buffer */
741 reg = BUF_CLR;
742 writel(reg, &dp_regs->buffer_data_ctl);
743
744 /* Select EDID device */
745 retval = exynos_dp_select_i2c_device(device_addr, reg_addr);
746 if (retval != 0) {
747 printf("DP Select EDID device fail. retry !\n");
748 continue;
749 }
750
751 /*
752 * Set I2C transaction and read data
753 * If bit 3 is 1, DisplayPort transaction.
754 * If Bit 3 is 0, I2C transaction.
755 */
756 reg = AUX_TX_COMM_I2C_TRANSACTION |
757 AUX_TX_COMM_READ;
758 writel(reg, &dp_regs->aux_ch_ctl1);
759
760 /* Start AUX transaction */
761 retval = exynos_dp_start_aux_transaction();
762 if (retval != EXYNOS_DP_SUCCESS)
763 printf("%s: DP Aux Transaction fail!\n", __func__);
764 }
765
766 /* Read data */
767 if (retval == 0)
768 *data = readl(&dp_regs->buf_data0);
769
770 return retval;
771}
772
773int exynos_dp_read_bytes_from_i2c(unsigned int device_addr,
774 unsigned int reg_addr, unsigned int count, unsigned char edid[])
775{
776 unsigned int reg;
777 unsigned int i, j;
778 unsigned int cur_data_idx;
779 unsigned int defer = 0;
780 int retval = 0;
Donghwa Leed2a69822012-07-02 01:16:02 +0000781
782 for (i = 0; i < count; i += 16) { /* use 16 burst */
783 for (j = 0; j < 100; j++) {
784 /* Clear AUX CH data buffer */
785 reg = BUF_CLR;
786 writel(reg, &dp_regs->buffer_data_ctl);
787
788 /* Set normal AUX CH command */
789 reg = readl(&dp_regs->aux_ch_ctl2);
790 reg &= ~ADDR_ONLY;
791 writel(reg, &dp_regs->aux_ch_ctl2);
792
793 /*
794 * If Rx sends defer, Tx sends only reads
795 * request without sending addres
796 */
797 if (!defer)
798 retval =
799 exynos_dp_select_i2c_device(device_addr,
800 reg_addr + i);
801 else
802 defer = 0;
803
804 if (retval == EXYNOS_DP_SUCCESS) {
805 /*
806 * Set I2C transaction and write data
807 * If bit 3 is 1, DisplayPort transaction.
808 * If Bit 3 is 0, I2C transaction.
809 */
810 reg = AUX_LENGTH(16) |
811 AUX_TX_COMM_I2C_TRANSACTION |
812 AUX_TX_COMM_READ;
813 writel(reg, &dp_regs->aux_ch_ctl1);
814
815 /* Start AUX transaction */
816 retval = exynos_dp_start_aux_transaction();
817 if (retval == 0)
818 break;
819 else
820 printf("DP Aux Transaction fail!\n");
821 }
822 /* Check if Rx sends defer */
823 reg = readl(&dp_regs->aux_rx_comm);
824 if (reg == AUX_RX_COMM_AUX_DEFER ||
825 reg == AUX_RX_COMM_I2C_DEFER) {
Simon Glass129c9422015-07-02 18:16:14 -0600826 printf("DP Defer: %d\n", reg);
Donghwa Leed2a69822012-07-02 01:16:02 +0000827 defer = 1;
828 }
829 }
830
831 for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
832 reg = readl((unsigned int)&dp_regs->buf_data0
833 + 4 * cur_data_idx);
834 edid[i + cur_data_idx] = (unsigned char)reg;
835 }
836 }
837
838 return retval;
839}
840
841void exynos_dp_reset_macro(void)
842{
843 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000844
845 reg = readl(&dp_regs->phy_test);
846 reg |= MACRO_RST;
847 writel(reg, &dp_regs->phy_test);
848
849 /* 10 us is the minimum Macro reset time. */
850 mdelay(1);
851
852 reg &= ~MACRO_RST;
853 writel(reg, &dp_regs->phy_test);
854}
855
856void exynos_dp_set_link_bandwidth(unsigned char bwtype)
857{
858 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000859
860 reg = (unsigned int)bwtype;
861
862 /* Set bandwidth to 2.7G or 1.62G */
863 if ((bwtype == DP_LANE_BW_1_62) || (bwtype == DP_LANE_BW_2_70))
864 writel(reg, &dp_regs->link_bw_set);
865}
866
867unsigned char exynos_dp_get_link_bandwidth(void)
868{
869 unsigned char ret;
870 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000871
872 reg = readl(&dp_regs->link_bw_set);
873 ret = (unsigned char)reg;
874
875 return ret;
876}
877
878void exynos_dp_set_lane_count(unsigned char count)
879{
880 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000881
882 reg = (unsigned int)count;
883
884 if ((count == DP_LANE_CNT_1) || (count == DP_LANE_CNT_2) ||
885 (count == DP_LANE_CNT_4))
886 writel(reg, &dp_regs->lane_count_set);
887}
888
889unsigned int exynos_dp_get_lane_count(void)
890{
891 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000892
893 reg = readl(&dp_regs->lane_count_set);
894
895 return reg;
896}
897
898unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt)
899{
Donghwa Leed2a69822012-07-02 01:16:02 +0000900 unsigned int reg_list[DP_LANE_CNT_4] = {
901 (unsigned int)&dp_regs->ln0_link_training_ctl,
902 (unsigned int)&dp_regs->ln1_link_training_ctl,
903 (unsigned int)&dp_regs->ln2_link_training_ctl,
904 (unsigned int)&dp_regs->ln3_link_training_ctl,
905 };
906
907 return readl(reg_list[lanecnt]);
908}
909
910void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val,
911 unsigned char lanecnt)
912{
Donghwa Leed2a69822012-07-02 01:16:02 +0000913 unsigned int reg_list[DP_LANE_CNT_4] = {
914 (unsigned int)&dp_regs->ln0_link_training_ctl,
915 (unsigned int)&dp_regs->ln1_link_training_ctl,
916 (unsigned int)&dp_regs->ln2_link_training_ctl,
917 (unsigned int)&dp_regs->ln3_link_training_ctl,
918 };
919
920 writel(request_val, reg_list[lanecnt]);
921}
922
923void exynos_dp_set_lane_pre_emphasis(unsigned int level, unsigned char lanecnt)
924{
925 unsigned char i;
926 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000927 unsigned int reg_list[DP_LANE_CNT_4] = {
928 (unsigned int)&dp_regs->ln0_link_training_ctl,
929 (unsigned int)&dp_regs->ln1_link_training_ctl,
930 (unsigned int)&dp_regs->ln2_link_training_ctl,
931 (unsigned int)&dp_regs->ln3_link_training_ctl,
932 };
933 unsigned int reg_shift[DP_LANE_CNT_4] = {
934 PRE_EMPHASIS_SET_0_SHIFT,
935 PRE_EMPHASIS_SET_1_SHIFT,
936 PRE_EMPHASIS_SET_2_SHIFT,
937 PRE_EMPHASIS_SET_3_SHIFT
938 };
939
940 for (i = 0; i < lanecnt; i++) {
941 reg = level << reg_shift[i];
942 writel(reg, reg_list[i]);
943 }
944}
945
946void exynos_dp_set_training_pattern(unsigned int pattern)
947{
948 unsigned int reg = 0;
Donghwa Leed2a69822012-07-02 01:16:02 +0000949
950 switch (pattern) {
951 case PRBS7:
952 reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
953 break;
954 case D10_2:
955 reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
956 break;
957 case TRAINING_PTN1:
958 reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
959 break;
960 case TRAINING_PTN2:
961 reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
962 break;
963 case DP_NONE:
964 reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_DISABLE |
965 SW_TRAINING_PATTERN_SET_NORMAL;
966 break;
967 default:
968 break;
969 }
970
971 writel(reg, &dp_regs->training_ptn_set);
972}
973
974void exynos_dp_enable_enhanced_mode(unsigned char enable)
975{
976 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000977
978 reg = readl(&dp_regs->sys_ctl4);
979 reg &= ~ENHANCED;
980
981 if (enable)
982 reg |= ENHANCED;
983
984 writel(reg, &dp_regs->sys_ctl4);
985}
986
987void exynos_dp_enable_scrambling(unsigned int enable)
988{
989 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +0000990
991 reg = readl(&dp_regs->training_ptn_set);
992 reg &= ~(SCRAMBLING_DISABLE);
993
994 if (!enable)
995 reg |= SCRAMBLING_DISABLE;
996
997 writel(reg, &dp_regs->training_ptn_set);
998}
999
1000int exynos_dp_init_video(void)
1001{
1002 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001003
1004 /* Clear VID_CLK_CHG[1] and VID_FORMAT_CHG[3] and VSYNC_DET[7] */
1005 reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
1006 writel(reg, &dp_regs->common_int_sta1);
1007
1008 /* I_STRM__CLK detect : DE_CTL : Auto detect */
1009 reg &= ~DET_CTRL;
1010 writel(reg, &dp_regs->sys_ctl1);
1011
1012 return 0;
1013}
1014
1015void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info)
1016{
1017 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001018
1019 /* Video Slave mode setting */
1020 reg = readl(&dp_regs->func_en1);
1021 reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
1022 reg |= MASTER_VID_FUNC_EN_N;
1023 writel(reg, &dp_regs->func_en1);
1024
1025 /* Configure Interlaced for slave mode video */
1026 reg = readl(&dp_regs->video_ctl10);
1027 reg &= ~INTERACE_SCAN_CFG;
1028 reg |= (video_info->interlaced << INTERACE_SCAN_CFG_SHIFT);
1029 writel(reg, &dp_regs->video_ctl10);
1030
1031 /* Configure V sync polarity for slave mode video */
1032 reg = readl(&dp_regs->video_ctl10);
1033 reg &= ~VSYNC_POLARITY_CFG;
1034 reg |= (video_info->v_sync_polarity << V_S_POLARITY_CFG_SHIFT);
1035 writel(reg, &dp_regs->video_ctl10);
1036
1037 /* Configure H sync polarity for slave mode video */
1038 reg = readl(&dp_regs->video_ctl10);
1039 reg &= ~HSYNC_POLARITY_CFG;
1040 reg |= (video_info->h_sync_polarity << H_S_POLARITY_CFG_SHIFT);
1041 writel(reg, &dp_regs->video_ctl10);
1042
1043 /*Set video mode to slave mode */
1044 reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
1045 writel(reg, &dp_regs->soc_general_ctl);
1046}
1047
1048void exynos_dp_set_video_color_format(struct edp_video_info *video_info)
1049{
1050 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001051
1052 /* Configure the input color depth, color space, dynamic range */
1053 reg = (video_info->dynamic_range << IN_D_RANGE_SHIFT) |
1054 (video_info->color_depth << IN_BPC_SHIFT) |
1055 (video_info->color_space << IN_COLOR_F_SHIFT);
1056 writel(reg, &dp_regs->video_ctl2);
1057
1058 /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
1059 reg = readl(&dp_regs->video_ctl3);
1060 reg &= ~IN_YC_COEFFI_MASK;
1061 if (video_info->ycbcr_coeff)
1062 reg |= IN_YC_COEFFI_ITU709;
1063 else
1064 reg |= IN_YC_COEFFI_ITU601;
1065 writel(reg, &dp_regs->video_ctl3);
1066}
1067
1068int exynos_dp_config_video_bist(struct edp_device_info *edp_info)
1069{
1070 unsigned int reg;
1071 unsigned int bist_type = 0;
1072 struct edp_video_info video_info = edp_info->video_info;
Donghwa Leed2a69822012-07-02 01:16:02 +00001073
1074 /* For master mode, you don't need to set the video format */
1075 if (video_info.master_mode == 0) {
1076 writel(TOTAL_LINE_CFG_L(edp_info->disp_info.v_total),
1077 &dp_regs->total_ln_cfg_l);
1078 writel(TOTAL_LINE_CFG_H(edp_info->disp_info.v_total),
1079 &dp_regs->total_ln_cfg_h);
1080 writel(ACTIVE_LINE_CFG_L(edp_info->disp_info.v_res),
1081 &dp_regs->active_ln_cfg_l);
1082 writel(ACTIVE_LINE_CFG_H(edp_info->disp_info.v_res),
1083 &dp_regs->active_ln_cfg_h);
1084 writel(edp_info->disp_info.v_sync_width,
1085 &dp_regs->vsw_cfg);
1086 writel(edp_info->disp_info.v_back_porch,
1087 &dp_regs->vbp_cfg);
1088 writel(edp_info->disp_info.v_front_porch,
1089 &dp_regs->vfp_cfg);
1090
1091 writel(TOTAL_PIXEL_CFG_L(edp_info->disp_info.h_total),
1092 &dp_regs->total_pix_cfg_l);
1093 writel(TOTAL_PIXEL_CFG_H(edp_info->disp_info.h_total),
1094 &dp_regs->total_pix_cfg_h);
1095 writel(ACTIVE_PIXEL_CFG_L(edp_info->disp_info.h_res),
1096 &dp_regs->active_pix_cfg_l);
1097 writel(ACTIVE_PIXEL_CFG_H(edp_info->disp_info.h_res),
1098 &dp_regs->active_pix_cfg_h);
1099 writel(H_F_PORCH_CFG_L(edp_info->disp_info.h_front_porch),
1100 &dp_regs->hfp_cfg_l);
1101 writel(H_F_PORCH_CFG_H(edp_info->disp_info.h_front_porch),
1102 &dp_regs->hfp_cfg_h);
1103 writel(H_SYNC_PORCH_CFG_L(edp_info->disp_info.h_sync_width),
1104 &dp_regs->hsw_cfg_l);
1105 writel(H_SYNC_PORCH_CFG_H(edp_info->disp_info.h_sync_width),
1106 &dp_regs->hsw_cfg_h);
1107 writel(H_B_PORCH_CFG_L(edp_info->disp_info.h_back_porch),
1108 &dp_regs->hbp_cfg_l);
1109 writel(H_B_PORCH_CFG_H(edp_info->disp_info.h_back_porch),
1110 &dp_regs->hbp_cfg_h);
1111
1112 /*
1113 * Set SLAVE_I_SCAN_CFG[2], VSYNC_P_CFG[1],
1114 * HSYNC_P_CFG[0] properly
1115 */
1116 reg = (video_info.interlaced << INTERACE_SCAN_CFG_SHIFT |
1117 video_info.v_sync_polarity << V_S_POLARITY_CFG_SHIFT |
1118 video_info.h_sync_polarity << H_S_POLARITY_CFG_SHIFT);
1119 writel(reg, &dp_regs->video_ctl10);
1120 }
1121
1122 /* BIST color bar width set--set to each bar is 32 pixel width */
1123 switch (video_info.bist_pattern) {
1124 case COLORBAR_32:
1125 bist_type = BIST_WIDTH_BAR_32_PIXEL |
1126 BIST_TYPE_COLOR_BAR;
1127 break;
1128 case COLORBAR_64:
1129 bist_type = BIST_WIDTH_BAR_64_PIXEL |
1130 BIST_TYPE_COLOR_BAR;
1131 break;
1132 case WHITE_GRAY_BALCKBAR_32:
1133 bist_type = BIST_WIDTH_BAR_32_PIXEL |
1134 BIST_TYPE_WHITE_GRAY_BLACK_BAR;
1135 break;
1136 case WHITE_GRAY_BALCKBAR_64:
1137 bist_type = BIST_WIDTH_BAR_64_PIXEL |
1138 BIST_TYPE_WHITE_GRAY_BLACK_BAR;
1139 break;
1140 case MOBILE_WHITEBAR_32:
1141 bist_type = BIST_WIDTH_BAR_32_PIXEL |
1142 BIST_TYPE_MOBILE_WHITE_BAR;
1143 break;
1144 case MOBILE_WHITEBAR_64:
1145 bist_type = BIST_WIDTH_BAR_64_PIXEL |
1146 BIST_TYPE_MOBILE_WHITE_BAR;
1147 break;
1148 default:
1149 return -1;
1150 }
1151
1152 reg = bist_type;
1153 writel(reg, &dp_regs->video_ctl4);
1154
1155 return 0;
1156}
1157
1158unsigned int exynos_dp_is_slave_video_stream_clock_on(void)
1159{
1160 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001161
1162 /* Update Video stream clk detect status */
1163 reg = readl(&dp_regs->sys_ctl1);
1164 writel(reg, &dp_regs->sys_ctl1);
1165
1166 reg = readl(&dp_regs->sys_ctl1);
1167
1168 if (!(reg & DET_STA)) {
1169 debug("DP Input stream clock not detected.\n");
1170 return -EIO;
1171 }
1172
1173 return EXYNOS_DP_SUCCESS;
1174}
1175
1176void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value,
1177 unsigned int n_value)
1178{
1179 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001180
1181 if (type == REGISTER_M) {
1182 reg = readl(&dp_regs->sys_ctl4);
1183 reg |= FIX_M_VID;
1184 writel(reg, &dp_regs->sys_ctl4);
1185 reg = M_VID0_CFG(m_value);
1186 writel(reg, &dp_regs->m_vid0);
1187 reg = M_VID1_CFG(m_value);
1188 writel(reg, &dp_regs->m_vid1);
1189 reg = M_VID2_CFG(m_value);
1190 writel(reg, &dp_regs->m_vid2);
1191
1192 reg = N_VID0_CFG(n_value);
1193 writel(reg, &dp_regs->n_vid0);
1194 reg = N_VID1_CFG(n_value);
1195 writel(reg, &dp_regs->n_vid1);
1196 reg = N_VID2_CFG(n_value);
1197 writel(reg, &dp_regs->n_vid2);
1198 } else {
1199 reg = readl(&dp_regs->sys_ctl4);
1200 reg &= ~FIX_M_VID;
1201 writel(reg, &dp_regs->sys_ctl4);
1202 }
1203}
1204
1205void exynos_dp_set_video_timing_mode(unsigned int type)
1206{
1207 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001208
1209 reg = readl(&dp_regs->video_ctl10);
1210 reg &= ~FORMAT_SEL;
1211
1212 if (type != VIDEO_TIMING_FROM_CAPTURE)
1213 reg |= FORMAT_SEL;
1214
1215 writel(reg, &dp_regs->video_ctl10);
1216}
1217
1218void exynos_dp_enable_video_master(unsigned int enable)
1219{
1220 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001221
1222 reg = readl(&dp_regs->soc_general_ctl);
1223 if (enable) {
1224 reg &= ~VIDEO_MODE_MASK;
1225 reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
1226 } else {
1227 reg &= ~VIDEO_MODE_MASK;
1228 reg |= VIDEO_MODE_SLAVE_MODE;
1229 }
1230
1231 writel(reg, &dp_regs->soc_general_ctl);
1232}
1233
1234void exynos_dp_start_video(void)
1235{
1236 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001237
1238 /* Enable Video input and disable Mute */
1239 reg = readl(&dp_regs->video_ctl1);
1240 reg |= VIDEO_EN;
1241 writel(reg, &dp_regs->video_ctl1);
1242}
1243
1244unsigned int exynos_dp_is_video_stream_on(void)
1245{
1246 unsigned int reg;
Donghwa Leed2a69822012-07-02 01:16:02 +00001247
1248 /* Update STRM_VALID */
1249 reg = readl(&dp_regs->sys_ctl3);
1250 writel(reg, &dp_regs->sys_ctl3);
1251
1252 reg = readl(&dp_regs->sys_ctl3);
1253 if (!(reg & STRM_VALID))
1254 return -EIO;
1255
1256 return EXYNOS_DP_SUCCESS;
1257}