Luca Ellero | 1ac30d1 | 2023-07-05 14:56:16 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (C) 2023 ASEM Srl |
| 4 | * Author: Luca Ellero <l.ellero@asem.it> |
| 5 | * |
| 6 | * Originally based on NXP linux-imx kernel v5.15 drivers/iio/adc/imx93_adc.c |
| 7 | */ |
| 8 | |
| 9 | #include <common.h> |
| 10 | #include <errno.h> |
| 11 | #include <dm.h> |
| 12 | #include <linux/bitfield.h> |
| 13 | #include <linux/iopoll.h> |
| 14 | #include <clk.h> |
| 15 | #include <adc.h> |
| 16 | |
| 17 | #define IMX93_ADC_MCR 0x00 |
| 18 | #define IMX93_ADC_MSR 0x04 |
| 19 | #define IMX93_ADC_ISR 0x10 |
| 20 | #define IMX93_ADC_IMR 0x20 |
| 21 | #define IMX93_ADC_CIMR0 0x24 |
| 22 | #define IMX93_ADC_CTR0 0x94 |
| 23 | #define IMX93_ADC_NCMR0 0xA4 |
| 24 | #define IMX93_ADC_PCDR0 0x100 |
| 25 | #define IMX93_ADC_PCDR1 0x104 |
| 26 | #define IMX93_ADC_PCDR2 0x108 |
| 27 | #define IMX93_ADC_PCDR3 0x10c |
| 28 | #define IMX93_ADC_PCDR4 0x110 |
| 29 | #define IMX93_ADC_PCDR5 0x114 |
| 30 | #define IMX93_ADC_PCDR6 0x118 |
| 31 | #define IMX93_ADC_PCDR7 0x11c |
| 32 | #define IMX93_ADC_CALSTAT 0x39C |
| 33 | |
| 34 | #define IMX93_ADC_MCR_MODE_MASK BIT(29) |
| 35 | #define IMX93_ADC_MCR_NSTART_MASK BIT(24) |
| 36 | #define IMX93_ADC_MCR_CALSTART_MASK BIT(14) |
| 37 | #define IMX93_ADC_MCR_ADCLKSE_MASK BIT(8) |
| 38 | #define IMX93_ADC_MCR_PWDN_MASK BIT(0) |
| 39 | |
| 40 | #define IMX93_ADC_MSR_CALFAIL_MASK BIT(30) |
| 41 | #define IMX93_ADC_MSR_CALBUSY_MASK BIT(29) |
| 42 | #define IMX93_ADC_MSR_ADCSTATUS_MASK GENMASK(2, 0) |
| 43 | |
| 44 | #define IMX93_ADC_ISR_EOC_MASK BIT(1) |
| 45 | |
| 46 | #define IMX93_ADC_IMR_EOC_MASK BIT(1) |
| 47 | #define IMX93_ADC_IMR_ECH_MASK BIT(0) |
| 48 | |
| 49 | #define IMX93_ADC_PCDR_CDATA_MASK GENMASK(11, 0) |
| 50 | |
| 51 | #define IDLE 0 |
| 52 | #define POWER_DOWN 1 |
| 53 | #define WAIT_STATE 2 |
| 54 | #define BUSY_IN_CALIBRATION 3 |
| 55 | #define SAMPLE 4 |
| 56 | #define CONVERSION 6 |
| 57 | |
| 58 | #define IMX93_ADC_MAX_CHANNEL 3 |
| 59 | #define IMX93_ADC_DAT_MASK 0xfff |
| 60 | #define IMX93_ADC_TIMEOUT 100000 |
| 61 | |
| 62 | struct imx93_adc_priv { |
| 63 | int active_channel; |
| 64 | void __iomem *regs; |
| 65 | struct clk ipg_clk; |
| 66 | }; |
| 67 | |
| 68 | static void imx93_adc_power_down(struct imx93_adc_priv *adc) |
| 69 | { |
| 70 | u32 mcr, msr; |
| 71 | int ret; |
| 72 | |
| 73 | mcr = readl(adc->regs + IMX93_ADC_MCR); |
| 74 | mcr |= FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1); |
| 75 | writel(mcr, adc->regs + IMX93_ADC_MCR); |
| 76 | |
| 77 | ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr, |
| 78 | ((msr & IMX93_ADC_MSR_ADCSTATUS_MASK) == POWER_DOWN), 50); |
| 79 | if (ret == -ETIMEDOUT) |
| 80 | pr_warn("ADC not in power down mode, current MSR: %x\n", msr); |
| 81 | } |
| 82 | |
| 83 | static void imx93_adc_power_up(struct imx93_adc_priv *adc) |
| 84 | { |
| 85 | u32 mcr; |
| 86 | |
| 87 | /* bring ADC out of power down state, in idle state */ |
| 88 | mcr = readl(adc->regs + IMX93_ADC_MCR); |
| 89 | mcr &= ~FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1); |
| 90 | writel(mcr, adc->regs + IMX93_ADC_MCR); |
| 91 | } |
| 92 | |
| 93 | static void imx93_adc_config_ad_clk(struct imx93_adc_priv *adc) |
| 94 | { |
| 95 | u32 mcr; |
| 96 | |
| 97 | /* put adc in power down mode */ |
| 98 | imx93_adc_power_down(adc); |
| 99 | |
| 100 | /* config the AD_CLK equal to bus clock */ |
| 101 | mcr = readl(adc->regs + IMX93_ADC_MCR); |
| 102 | mcr |= FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1); |
| 103 | writel(mcr, adc->regs + IMX93_ADC_MCR); |
| 104 | |
| 105 | /* bring ADC out of power down state, in idle state */ |
| 106 | imx93_adc_power_up(adc); |
| 107 | } |
| 108 | |
| 109 | static int imx93_adc_calibration(struct imx93_adc_priv *adc) |
| 110 | { |
| 111 | u32 mcr, msr; |
| 112 | int ret; |
| 113 | |
| 114 | /* make sure ADC is in power down mode */ |
| 115 | imx93_adc_power_down(adc); |
| 116 | |
| 117 | /* config SAR controller operating clock */ |
| 118 | mcr = readl(adc->regs + IMX93_ADC_MCR); |
| 119 | mcr &= ~FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1); |
| 120 | writel(mcr, adc->regs + IMX93_ADC_MCR); |
| 121 | |
| 122 | /* bring ADC out of power down state */ |
| 123 | imx93_adc_power_up(adc); |
| 124 | |
| 125 | /* |
| 126 | * we use the default TSAMP/NRSMPL/AVGEN in MCR, |
| 127 | * can add the setting of these bit if need |
| 128 | */ |
| 129 | |
| 130 | /* run calibration */ |
| 131 | mcr = readl(adc->regs + IMX93_ADC_MCR); |
| 132 | mcr |= FIELD_PREP(IMX93_ADC_MCR_CALSTART_MASK, 1); |
| 133 | writel(mcr, adc->regs + IMX93_ADC_MCR); |
| 134 | |
| 135 | /* wait calibration to be finished */ |
| 136 | ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr, |
| 137 | !(msr & IMX93_ADC_MSR_CALBUSY_MASK), 2000000); |
| 138 | if (ret == -ETIMEDOUT) { |
| 139 | pr_warn("ADC calibration timeout\n"); |
| 140 | return ret; |
| 141 | } |
| 142 | |
| 143 | /* check whether calbration is successful or not */ |
| 144 | msr = readl(adc->regs + IMX93_ADC_MSR); |
| 145 | if (msr & IMX93_ADC_MSR_CALFAIL_MASK) { |
| 146 | pr_warn("ADC calibration failed!\n"); |
| 147 | return -EAGAIN; |
| 148 | } |
| 149 | |
| 150 | return 0; |
| 151 | } |
| 152 | |
| 153 | static int imx93_adc_channel_data(struct udevice *dev, int channel, |
| 154 | unsigned int *data) |
| 155 | { |
| 156 | struct imx93_adc_priv *adc = dev_get_priv(dev); |
| 157 | u32 isr, pcda; |
| 158 | int ret; |
| 159 | |
| 160 | if (channel != adc->active_channel) { |
| 161 | pr_err("Requested channel is not active!\n"); |
| 162 | return -EINVAL; |
| 163 | } |
| 164 | |
| 165 | ret = readl_poll_timeout(adc->regs + IMX93_ADC_ISR, isr, |
| 166 | (isr & IMX93_ADC_ISR_EOC_MASK), IMX93_ADC_TIMEOUT); |
| 167 | |
| 168 | /* clear interrupts */ |
| 169 | writel(isr, adc->regs + IMX93_ADC_ISR); |
| 170 | |
| 171 | if (ret == -ETIMEDOUT) { |
| 172 | pr_warn("ADC conversion timeout!\n"); |
| 173 | return ret; |
| 174 | } |
| 175 | |
| 176 | pcda = readl(adc->regs + IMX93_ADC_PCDR0 + channel * 4); |
| 177 | |
| 178 | *data = FIELD_GET(IMX93_ADC_PCDR_CDATA_MASK, pcda); |
| 179 | |
| 180 | return 0; |
| 181 | } |
| 182 | |
| 183 | static int imx93_adc_start_channel(struct udevice *dev, int channel) |
| 184 | { |
| 185 | struct imx93_adc_priv *adc = dev_get_priv(dev); |
| 186 | u32 imr, mcr; |
| 187 | |
| 188 | /* config channel mask register */ |
| 189 | writel(1 << channel, adc->regs + IMX93_ADC_NCMR0); |
| 190 | |
| 191 | /* config interrupt mask */ |
| 192 | imr = FIELD_PREP(IMX93_ADC_IMR_EOC_MASK, 1); |
| 193 | writel(imr, adc->regs + IMX93_ADC_IMR); |
| 194 | writel(1 << channel, adc->regs + IMX93_ADC_CIMR0); |
| 195 | |
| 196 | /* config one-shot mode */ |
| 197 | mcr = readl(adc->regs + IMX93_ADC_MCR); |
| 198 | mcr &= ~FIELD_PREP(IMX93_ADC_MCR_MODE_MASK, 1); |
| 199 | writel(mcr, adc->regs + IMX93_ADC_MCR); |
| 200 | |
| 201 | /* start normal conversion */ |
| 202 | mcr = readl(adc->regs + IMX93_ADC_MCR); |
| 203 | mcr |= FIELD_PREP(IMX93_ADC_MCR_NSTART_MASK, 1); |
| 204 | writel(mcr, adc->regs + IMX93_ADC_MCR); |
| 205 | |
| 206 | adc->active_channel = channel; |
| 207 | |
| 208 | return 0; |
| 209 | } |
| 210 | |
| 211 | static int imx93_adc_stop(struct udevice *dev) |
| 212 | { |
| 213 | struct imx93_adc_priv *adc = dev_get_priv(dev); |
| 214 | |
| 215 | imx93_adc_power_down(adc); |
| 216 | |
| 217 | adc->active_channel = -1; |
| 218 | |
| 219 | return 0; |
| 220 | } |
| 221 | |
| 222 | static int imx93_adc_probe(struct udevice *dev) |
| 223 | { |
| 224 | struct imx93_adc_priv *adc = dev_get_priv(dev); |
| 225 | unsigned int ret; |
| 226 | |
| 227 | ret = imx93_adc_calibration(adc); |
| 228 | if (ret < 0) |
| 229 | return ret; |
| 230 | |
| 231 | imx93_adc_config_ad_clk(adc); |
| 232 | |
| 233 | adc->active_channel = -1; |
| 234 | |
| 235 | return 0; |
| 236 | } |
| 237 | |
| 238 | static int imx93_adc_of_to_plat(struct udevice *dev) |
| 239 | { |
| 240 | struct adc_uclass_plat *uc_pdata = dev_get_uclass_plat(dev); |
| 241 | struct imx93_adc_priv *adc = dev_get_priv(dev); |
| 242 | unsigned int ret; |
| 243 | |
| 244 | adc->regs = dev_read_addr_ptr(dev); |
| 245 | if (adc->regs == (struct imx93_adc *)FDT_ADDR_T_NONE) { |
| 246 | pr_err("Dev: %s - can't get address!", dev->name); |
| 247 | return -ENODATA; |
| 248 | } |
| 249 | |
| 250 | ret = clk_get_by_name(dev, "ipg", &adc->ipg_clk); |
| 251 | if (ret < 0) { |
| 252 | pr_err("Can't get ADC ipg clk: %d\n", ret); |
| 253 | return ret; |
| 254 | } |
| 255 | ret = clk_enable(&adc->ipg_clk); |
| 256 | if(ret) { |
| 257 | pr_err("Can't enable ADC ipg clk: %d\n", ret); |
| 258 | return ret; |
| 259 | } |
| 260 | |
| 261 | uc_pdata->data_mask = IMX93_ADC_DAT_MASK; |
| 262 | uc_pdata->data_format = ADC_DATA_FORMAT_BIN; |
| 263 | uc_pdata->data_timeout_us = IMX93_ADC_TIMEOUT; |
| 264 | |
| 265 | /* Mask available channel bits: [0:3] */ |
| 266 | uc_pdata->channel_mask = (2 << IMX93_ADC_MAX_CHANNEL) - 1; |
| 267 | |
| 268 | return 0; |
| 269 | } |
| 270 | |
| 271 | static const struct adc_ops imx93_adc_ops = { |
| 272 | .start_channel = imx93_adc_start_channel, |
| 273 | .channel_data = imx93_adc_channel_data, |
| 274 | .stop = imx93_adc_stop, |
| 275 | }; |
| 276 | |
| 277 | static const struct udevice_id imx93_adc_ids[] = { |
| 278 | { .compatible = "nxp,imx93-adc" }, |
| 279 | { } |
| 280 | }; |
| 281 | |
| 282 | U_BOOT_DRIVER(imx93_adc) = { |
| 283 | .name = "imx93-adc", |
| 284 | .id = UCLASS_ADC, |
| 285 | .of_match = imx93_adc_ids, |
| 286 | .ops = &imx93_adc_ops, |
| 287 | .probe = imx93_adc_probe, |
| 288 | .of_to_plat = imx93_adc_of_to_plat, |
| 289 | .priv_auto = sizeof(struct imx93_adc_priv), |
| 290 | }; |