blob: ee4f2cdca7f624fe4843d8cc40930c93e33c68bb [file] [log] [blame]
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +02001/*
2 * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23#include <common.h>
Ladislav Michl04531f32009-03-25 23:43:58 +010024#include <i2c.h>
Ladislav Michl71f7bd32009-03-25 23:43:50 +010025#include <flash.h>
Ladislav Michl0fc4f642009-03-31 13:43:10 +020026#include <nand.h>
27
28#include <asm/io.h>
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +020029
Wolfgang Denkd87080b2006-03-31 18:32:53 +020030DECLARE_GLOBAL_DATA_PTR;
31
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +020032int board_init(void)
33{
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +020034 /* arch number of NetStar board */
Stefan Roese12655812006-10-28 17:12:58 +020035 gd->bd->bi_arch_number = MACH_TYPE_NETSTAR;
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +020036
37 /* adress of boot parameters */
38 gd->bd->bi_boot_params = 0x10000100;
39
40 return 0;
41}
42
43int dram_init(void)
44{
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +020045 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
46 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
47
48 /* Take the Ethernet controller out of reset and wait
49 * for the EEPROM load to complete. */
50 *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
51 udelay(10); /* doesn't work before interrupt_init call */
52 *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
53 udelay(500);
54
55 return 0;
56}
57
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +020058int misc_init_r(void)
59{
Ladislav Michl04531f32009-03-25 23:43:58 +010060#if defined(CONFIG_RTC_DS1307)
61 /* enable trickle charge */
62 i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0x10, 0xaa);
63#endif
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +020064 return 0;
65}
66
Wolfgang Denkac7eb8a2005-09-14 23:53:32 +020067int board_late_init(void)
68{
69 return 0;
70}
Ladislav Michl71f7bd32009-03-25 23:43:50 +010071
72#if defined(CONFIG_CMD_FLASH)
73ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info)
74{
75 if (banknum == 0) { /* AM29LV800 boot flash */
76 info->portwidth = FLASH_CFI_16BIT;
77 info->chipwidth = FLASH_CFI_BY16;
78 info->interface = FLASH_CFI_X16;
79 return 1;
80 }
81
82 return 0;
83}
84#endif
Ladislav Michl0fc4f642009-03-31 13:43:10 +020085
86#if defined(CONFIG_CMD_NAND)
87/*
88 * hardware specific access to control-lines
89 *
90 * NAND_NCE: bit 0 - don't care
91 * NAND_CLE: bit 1 -> bit 1 (0x0002)
92 * NAND_ALE: bit 2 -> bit 2 (0x0004)
93 */
94static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd,
95 unsigned int ctrl)
96{
97 struct nand_chip *chip = mtd->priv;
98 unsigned long mask;
99
100 if (cmd == NAND_CMD_NONE)
101 return;
102
103 mask = (ctrl & NAND_CLE) ? 0x02 : 0;
104 if (ctrl & NAND_ALE)
105 mask |= 0x04;
106 writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask);
107}
108
109int board_nand_init(struct nand_chip *nand)
110{
111 nand->options = NAND_SAMSUNG_LP_OPTIONS;
112 nand->ecc.mode = NAND_ECC_SOFT;
113 nand->cmd_ctrl = netstar_nand_hwcontrol;
114 nand->chip_delay = 400;
115 return 0;
116}
117#endif