| Neil Armstrong | b72794e | 2018-09-05 15:57:11 +0200 | [diff] [blame] | 1 | U-Boot for Amlogic S400 |
| 2 | ======================= |
| 3 | |
| 4 | S400 is a reference board manufactured by Amlogic with the following |
| 5 | specifications: |
| 6 | |
| 7 | - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz |
| 8 | - 1GB DDR4 SDRAM |
| 9 | - 10/100 Ethernet |
| 10 | - 2 x USB 2.0 Host |
| 11 | - eMMC |
| 12 | - Infrared receiver |
| 13 | - SDIO WiFi Module |
| 14 | - MIPI DSI Connector |
| 15 | - Audio HAT Connector |
| 16 | - PCI-E M.2 Connectors |
| 17 | |
| 18 | Schematics are available from Amlogic on demand. |
| 19 | |
| 20 | Currently the u-boot port supports the following devices: |
| 21 | - serial |
| 22 | - eMMC |
| 23 | - Ethernet |
| 24 | - I2C |
| 25 | - Regulators |
| 26 | - Reset controller |
| 27 | - Clock controller |
| 28 | - USB Host |
| 29 | - ADC |
| 30 | |
| 31 | u-boot compilation |
| 32 | ================== |
| 33 | |
| 34 | > export ARCH=arm |
| 35 | > export CROSS_COMPILE=aarch64-none-elf- |
| 36 | > make s400_defconfig |
| 37 | > make |
| 38 | |
| 39 | Image creation |
| 40 | ============== |
| 41 | |
| 42 | Amlogic doesn't provide sources for the firmware and for tools needed |
| 43 | to create the bootloader image, so it is necessary to obtain them from |
| 44 | the git tree published by the board vendor: |
| 45 | |
| 46 | > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz |
| 47 | > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz |
| 48 | > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz |
| 49 | > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz |
| 50 | > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH |
| 51 | > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot |
| 52 | > cd amlogic-u-boot |
| 53 | > make axg_s400_v1_defconfig |
| 54 | > make |
| 55 | > export FIPDIR=$PWD/fip |
| 56 | |
| 57 | Go back to mainline U-boot source tree then : |
| 58 | > mkdir fip |
| 59 | |
| 60 | > cp $FIPDIR/axg/bl2.bin fip/ |
| 61 | > cp $FIPDIR/axg/acs.bin fip/ |
| 62 | > cp $FIPDIR/axg/bl21.bin fip/ |
| 63 | > cp $FIPDIR/axg/bl30.bin fip/ |
| 64 | > cp $FIPDIR/axg/bl301.bin fip/ |
| 65 | > cp $FIPDIR/axg/bl31.img fip/ |
| 66 | > cp u-boot.bin fip/bl33.bin |
| 67 | |
| 68 | > $FIPDIR/blx_fix.sh \ |
| 69 | fip/bl30.bin \ |
| 70 | fip/zero_tmp \ |
| 71 | fip/bl30_zero.bin \ |
| 72 | fip/bl301.bin \ |
| 73 | fip/bl301_zero.bin \ |
| 74 | fip/bl30_new.bin \ |
| 75 | bl30 |
| 76 | |
| 77 | > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 |
| 78 | |
| 79 | > $FIPDIR/blx_fix.sh \ |
| 80 | fip/bl2_acs.bin \ |
| 81 | fip/zero_tmp \ |
| 82 | fip/bl2_zero.bin \ |
| 83 | fip/bl21.bin \ |
| 84 | fip/bl21_zero.bin \ |
| 85 | fip/bl2_new.bin \ |
| 86 | bl2 |
| 87 | |
| 88 | > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ |
| 89 | --output fip/bl30_new.bin.enc \ |
| 90 | --level v3 --type bl30 |
| 91 | > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ |
| 92 | --output fip/bl31.img.enc \ |
| 93 | --level v3 --type bl31 |
| 94 | > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ |
| 95 | --output fip/bl33.bin.enc \ |
| 96 | --level v3 --type bl33 |
| 97 | > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ |
| 98 | --output fip/bl2.n.bin.sig |
| 99 | > $FIPDIR/axg/aml_encrypt_axg --bootmk \ |
| 100 | --output fip/u-boot.bin \ |
| 101 | --bl2 fip/bl2.n.bin.sig \ |
| 102 | --bl30 fip/bl30_new.bin.enc \ |
| 103 | --bl31 fip/bl31.img.enc \ |
| 104 | --bl33 fip/bl33.bin.enc --level v3 |
| 105 | |
| 106 | and then write the image to SD with: |
| 107 | |
| 108 | > DEV=/dev/your_sd_device |
| 109 | > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 |
| 110 | > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 |