wdenk | 24ee89b | 2002-11-03 17:56:27 +0000 | [diff] [blame] | 1 | ====================================================================== |
wdenk | 2729af9 | 2004-05-03 20:45:30 +0000 | [diff] [blame] | 2 | Changes since U-Boot 1.1.1: |
| 3 | ====================================================================== |
| 4 | |
wdenk | 10767cc | 2004-05-13 13:23:58 +0000 | [diff] [blame^] | 5 | * Add support for CATcenter board (based on PPChameleon ME module) |
| 6 | |
wdenk | 02b11f8 | 2004-05-12 22:54:36 +0000 | [diff] [blame] | 7 | * Patch by Klaus Heydeck, 12 May 2004: |
| 8 | Using external watchdog for KUP4 boards in mpc8xx/cpu.c; |
| 9 | load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c; |
| 10 | various changes to KUP4 board specific files |
| 11 | |
wdenk | 6c1362c | 2004-05-12 22:18:31 +0000 | [diff] [blame] | 12 | * Fix minor network problem on MPC5200: need some delay between |
| 13 | resetting the PHY and sending the first packet. Implemented in a |
| 14 | "natural" way by invoking the PHY reset and initialization code |
| 15 | only once after power on vs. each time the interface is brought up. |
| 16 | |
wdenk | 9d9e283 | 2004-05-11 21:53:55 +0000 | [diff] [blame] | 17 | * Add some limited support for low-speed devices to SL811 USB controller |
| 18 | (at least "usb reset" now passes successfully and "usb info" displays |
| 19 | correct information) |
| 20 | |
wdenk | baac607 | 2004-05-08 20:33:20 +0000 | [diff] [blame] | 21 | * Change init sequence for multiple network interfaces: initialize |
| 22 | on-chip interfaces before external cards. |
| 23 | |
wdenk | 32877d6 | 2004-05-05 19:44:41 +0000 | [diff] [blame] | 24 | * Fix memory leak in the NAND-specific JFFS2 code |
| 25 | |
| 26 | * Fix SL811 USB controller when attached to a USB hub |
| 27 | |
wdenk | 62b4ac9 | 2004-05-05 08:31:53 +0000 | [diff] [blame] | 28 | * Fix config option spelling in PM520 config file |
| 29 | |
| 30 | * Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by |
| 31 | patches by Pantelis Antoniou, 30 Mar 2004) |
| 32 | |
wdenk | 2729af9 | 2004-05-03 20:45:30 +0000 | [diff] [blame] | 33 | * Fix minor NAND JFFS2 related issue |
| 34 | |
| 35 | * Fixes for SL811 USB controller: |
| 36 | - implement workaround for broken memory stick |
| 37 | - improve error handling |
| 38 | |
| 39 | * Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better |
| 40 | cope with congested networks. |
| 41 | |
| 42 | ====================================================================== |
wdenk | 56b86bf | 2004-04-12 14:31:43 +0000 | [diff] [blame] | 43 | Changes for U-Boot 1.1.1: |
| 44 | ====================================================================== |
wdenk | 507bbe3 | 2004-04-18 21:13:41 +0000 | [diff] [blame] | 45 | |
wdenk | fc1cfcd | 2004-04-25 15:41:35 +0000 | [diff] [blame] | 46 | * Patch by Travis Sawyer, 23 Apr 2004: |
| 47 | Fix VSC/CIS 8201 phy descrambler interoperability timing due to |
| 48 | errata from Vitesse Semiconductor. |
wdenk | 0b8fa03 | 2004-04-25 14:37:29 +0000 | [diff] [blame] | 49 | |
| 50 | * Patch by Philippe Robin, 22 Apr 2004: |
wdenk | 02b11f8 | 2004-05-12 22:54:36 +0000 | [diff] [blame] | 51 | Fix ethernet configuration for "versatile" board |
wdenk | 0b8fa03 | 2004-04-25 14:37:29 +0000 | [diff] [blame] | 52 | |
| 53 | * Patch by Kshitij Gupta, 21 Apr 2004: |
| 54 | Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards |
| 55 | |
| 56 | * Patch by Steven Scholz, 24 Feb 2004: |
| 57 | Fix a bug in AT91RM9200 ethernet driver: |
| 58 | The MII interface is now initialized before accessing the PHY. |
| 59 | |
wdenk | b9711de | 2004-04-25 13:18:40 +0000 | [diff] [blame] | 60 | * Patch by John Kerl, 19 Apr 2004: |
| 61 | Use U-boot's miiphy.h for PHY register names, rather than |
| 62 | introducing a new header file. |
| 63 | |
| 64 | * Update pci_ids.h from linux-2.4.26 |
| 65 | |
| 66 | * Patch by Masami Komiya, 19 Apr 2004: |
| 67 | Fix problem cause by VLAN function on little endian architecture |
| 68 | without VLAN environment |
| 69 | |
wdenk | e9132ea | 2004-04-24 23:23:30 +0000 | [diff] [blame] | 70 | * Clean up the TQM8xx_YYMHz configurations; allow to use the same |
wdenk | b9711de | 2004-04-25 13:18:40 +0000 | [diff] [blame] | 71 | binary image for all clock frequencies. Implement run-time |
wdenk | e9132ea | 2004-04-24 23:23:30 +0000 | [diff] [blame] | 72 | optimization of flash access timing based on the actual bus |
| 73 | frequency. |
| 74 | |
wdenk | 5cf91d6 | 2004-04-23 20:32:05 +0000 | [diff] [blame] | 75 | * Modify KUP4X board configuration to use SL811 driver for USB memory |
| 76 | sticks (including FAT / VFAT filesystem support) |
| 77 | |
| 78 | * Add SL811 Host Controller Interface driver for USB |
| 79 | |
| 80 | * Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README |
| 81 | |
| 82 | * Patch by Pantelis Antoniou, 19 Apr 2004: |
| 83 | Allow to use shell style syntax (i. e. ${var} ) with standard parser. |
| 84 | Minor patches for Intracom boards. |
| 85 | |
| 86 | * Patch by Christian Pell, 19 Apr 2004: |
| 87 | cleanup support for CF/IDE on PCMCIA for PXA25X |
| 88 | |
wdenk | e35745b | 2004-04-18 23:32:11 +0000 | [diff] [blame] | 89 | * Temporarily disabled John Kerl's extended MII command code because |
| 90 | "miivals.h" is missing |
| 91 | |
| 92 | * Patches by Mark Jonas, 13 Apr 2004: |
| 93 | - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S |
| 94 | - Add sync instructions to IceCube SDRAM init code |
| 95 | - Move SDRAM chip constants into seperate include files |
| 96 | - Unify DDR and SDR initialization code |
| 97 | - Unify all IceCube (Lite5xxx) target names |
| 98 | |
wdenk | 2471111 | 2004-04-18 22:57:51 +0000 | [diff] [blame] | 99 | * Patch by John Kerl, 16 Apr 2004: |
| 100 | Enable ranges in mii command, e.g. mii read 0-1f 0 or |
| 101 | mii read 4-7 18-1a. Also add mii dump subcommand for |
| 102 | pretty-printing standard regs 0-5. |
| 103 | |
| 104 | * Patch by Stephen Williams, 16 April 2004: |
| 105 | fix typo in JSE.h; update MAINTAINERS |
| 106 | |
wdenk | 498b8db | 2004-04-18 22:26:17 +0000 | [diff] [blame] | 107 | * Patch by Matthew S. McClintock, 14 Apr 2004: |
| 108 | fix initdram function for utx8245 board |
| 109 | |
| 110 | * Patch by Markus Pietrek, 14 Apr 2004: |
| 111 | use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag |
| 112 | |
| 113 | * Patch by Reinhard Meyer, 18 Apr 2004: |
| 114 | provide the IDE Reset Function for EMK 5200 boards |
| 115 | |
| 116 | * Patch by Masami Komiya, 12 Apr 2004: |
| 117 | fix pci_hose_write_config_{byte,word}_via_dword problems |
| 118 | |
wdenk | a8bd82d | 2004-04-18 22:03:42 +0000 | [diff] [blame] | 119 | * Patch by Sangmoon Kim, 12 Apr 2004: |
| 120 | Update max RAM size for debris board |
| 121 | |
| 122 | * Patch by Travis Sawyer, 08 Apr 2004: |
| 123 | Add TLB entry for second DIMM slot on ocotea |
| 124 | |
| 125 | * Patch by Masami Komiya, 08 Apr 2004: |
| 126 | add RTL8169 network driver |
| 127 | |
wdenk | 7abf0c5 | 2004-04-18 21:45:42 +0000 | [diff] [blame] | 128 | * Patch by Dan Malek, 07 Apr 2004: |
| 129 | - Add support for RPC/STx GP3, Motorola 8560 board |
| 130 | - Update 85xx TSEC driver so it searches MII for first available PHY |
| 131 | and uses that one. |
| 132 | - Add functions to support console MII commands. |
| 133 | |
| 134 | * Patch by Tolunay Orkun, 07 Apr 2004: |
wdenk | a8bd82d | 2004-04-18 22:03:42 +0000 | [diff] [blame] | 135 | Move initialization of bi_iic_fast[] |
wdenk | 7abf0c5 | 2004-04-18 21:45:42 +0000 | [diff] [blame] | 136 | from board_init_f() to board_init_r() |
| 137 | |
| 138 | * Patch by Yasushi Shoji, 07 Apr 2004: |
| 139 | Cleanup microblaze port |
| 140 | |
| 141 | * Patch by Sangmoon Kim, 07 Apr 2004: |
| 142 | Add auto SDRAM module detection for Debris board |
| 143 | |
wdenk | d4326ac | 2004-04-18 21:17:30 +0000 | [diff] [blame] | 144 | * Patch by Rune Torgersen, 06 Apr 2004: |
| 145 | - Fix some PCI problems on the MPC8266ADS board |
| 146 | - Fix the location of some PCI entries in the immap structure |
| 147 | |
wdenk | 507bbe3 | 2004-04-18 21:13:41 +0000 | [diff] [blame] | 148 | * Patch by Yasushi Shoji, 07 Apr 2004: |
| 149 | - add support for microblaze processors |
| 150 | - add support for AtmarkTechno "suzaku" board |
| 151 | |
wdenk | 998eaae | 2004-04-18 19:43:36 +0000 | [diff] [blame] | 152 | * Configure PPChameleon board to use redundand environment in flash |
| 153 | |
| 154 | * Configure PPChameleon board to use JFFS2 NAND support. |
| 155 | |
| 156 | * Added support for JFFS2 filesystem (read-only) on top of NAND flash |
| 157 | |
wdenk | 6e59238 | 2004-04-18 17:39:38 +0000 | [diff] [blame] | 158 | * Patch by Rune Torgersen, 16 Apr 2004: |
| 159 | LBA48 fixes |
wdenk | 56b86bf | 2004-04-12 14:31:43 +0000 | [diff] [blame] | 160 | |
wdenk | c26e454 | 2004-04-18 10:13:26 +0000 | [diff] [blame] | 161 | * Patches by Pantelis Antoniou, 16 Apr 2004: |
| 162 | - add support for a new version of an Intracom board and fix |
| 163 | various other things on others. |
| 164 | - add verify support to the crc32 command (define |
| 165 | CONFIG_CRC32_VERIFY to enable it) |
| 166 | - fix FEC driver for MPC8xx systems: |
| 167 | 1. fix compilation problems for boards that use dynamic |
| 168 | allocation of DPRAM |
| 169 | 2. shut down FEC after network transfers |
| 170 | - HUSH parser fixes: |
| 171 | 1. A new test command was added. This is a simplified version of |
| 172 | the one in the bourne shell. |
| 173 | 2. A new exit command was added which terminates the current |
| 174 | executing script. |
| 175 | 3. Fixed handing of $? (exit code of last executed command) |
wdenk | 6e59238 | 2004-04-18 17:39:38 +0000 | [diff] [blame] | 176 | - Fix some compile problems; |
| 177 | add "once" functionality for the netretry variable |
wdenk | c26e454 | 2004-04-18 10:13:26 +0000 | [diff] [blame] | 178 | |
wdenk | ea66bc8 | 2004-04-15 23:23:39 +0000 | [diff] [blame] | 179 | * Patch by George G. Davis, 02 Apr 2004: |
| 180 | add support for Intel Assabet board |
| 181 | |
wdenk | db01a2e | 2004-04-15 23:14:49 +0000 | [diff] [blame] | 182 | * Patch by Stephen Williams, 01 Apr 2004: |
| 183 | Add support for Picture Elements JSE board |
| 184 | |
| 185 | * Patch by Christian Pell, 01 Apr 2004: |
| 186 | Add CompactFlash support for PXA systems. |
| 187 | |
wdenk | 04a85b3 | 2004-04-15 18:22:41 +0000 | [diff] [blame] | 188 | * Patches by Pantelis Antoniou, 30 Mar 2004: |
| 189 | - add auto-complete support to the U-Boot CLI |
| 190 | - add support for NETTA and NETPHONE boards; fix NETVIA board |
wdenk | 5a8c51c | 2004-04-15 21:16:42 +0000 | [diff] [blame] | 191 | - add support for the Epson 156x series of graphical displays |
| 192 | (These displays are serial and not suitable for using a normal |
| 193 | framebuffer console on them) |
| 194 | - add infrastructure needed in order to POST any DSPs in a board |
wdenk | a6ab4bf | 2004-04-15 21:31:56 +0000 | [diff] [blame] | 195 | - improve and fix various things in the MPC8xx FEC driver: |
| 196 | 1. The new 87x and 88x series of processors have two FECs, |
| 197 | and the new driver supports them both. |
| 198 | 2. Another change in the 87x/88x series is support for |
| 199 | the RMII (Reduced MII) interface. However numerous |
| 200 | changes are needed to make it work since the PHYs |
| 201 | are connected to the same lines. That means that |
| 202 | you have to address them correctly over the MII |
| 203 | interface. |
| 204 | 3. We now correctly match the MII/RMII interface |
| 205 | configuration to what the PHY reports. |
wdenk | a3d991b | 2004-04-15 21:48:45 +0000 | [diff] [blame] | 206 | - Fix problem when readingthe MII status register. Due to the |
| 207 | internal design of many PHYs you have to read the register |
| 208 | twice. The problem is more apparent in 10Mbit mode. |
| 209 | - add new mode ".jffs2s" for reading from a NAND device: it just |
| 210 | skips over bad blocks. |
| 211 | - add networking support for VLANs (802.1q), and CDP (Cisco |
| 212 | Discovery Protocol) |
wdenk | bda6c8a | 2004-04-15 21:58:11 +0000 | [diff] [blame] | 213 | - some minor patches / cleanup |
wdenk | 04a85b3 | 2004-04-15 18:22:41 +0000 | [diff] [blame] | 214 | |
| 215 | * Patch by Yuli Barcohen, 28 Mar 2004: |
| 216 | - Add support for MPC8272 family including MPC8247/8248/8271/8272 |
| 217 | - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS) |
| 218 | - Change configuration method for MPC8260ADS family |
| 219 | |
wdenk | d716b12 | 2004-04-12 16:12:49 +0000 | [diff] [blame] | 220 | * add startup code to clear the BSS of standalone applications |
| 221 | |
wdenk | 56b86bf | 2004-04-12 14:31:43 +0000 | [diff] [blame] | 222 | * Fix if / elif handling bug in HUSH shell |
| 223 | |
| 224 | ====================================================================== |
wdenk | f525c8a | 2004-04-10 20:44:51 +0000 | [diff] [blame] | 225 | Changes for U-Boot 1.1.0: |
wdenk | c83bf6a | 2004-01-06 22:38:14 +0000 | [diff] [blame] | 226 | ====================================================================== |
| 227 | |
wdenk | 7e78036 | 2004-04-08 22:31:29 +0000 | [diff] [blame] | 228 | * Patch by Mark Jonas: Remove config.tmp files only when |
| 229 | unconfiguring the board |
| 230 | |
| 231 | * Adapt RMU board for bigger flash memory |
| 232 | |
wdenk | 0608e04 | 2004-03-25 19:29:38 +0000 | [diff] [blame] | 233 | * Patch by Klaus Heydeck, 13 Mar 2003: |
| 234 | Add support for KUP4X Board |
| 235 | |
wdenk | 518e2e1 | 2004-03-25 14:59:05 +0000 | [diff] [blame] | 236 | * Patch by Pavel Bartusek, 21 Mar 2004 |
| 237 | Add Reiserfs support |
| 238 | |
| 239 | * Patch by Hinko Kocevar, 20 Mar 2004 |
| 240 | - Add auto-release for SMSC LAN91c111 driver |
| 241 | - Add save/restore of PTR and PNR regs as suggested in datasheet |
| 242 | |
wdenk | 6fb6af6 | 2004-03-23 23:20:24 +0000 | [diff] [blame] | 243 | * Patch by Stephen Williams, 19 March 2004 |
| 244 | Increase speed of sector reads from SystemACE, |
| 245 | shorten poll timeout and remove a useless reset |
| 246 | |
| 247 | * Patch by Tolunay Orkun, 19 Mar 2004: |
| 248 | Make GigE PHY 1000Mbps Speed/Duplex detection conditional |
| 249 | (CONFIG_PHY_GIGE) |
| 250 | |
| 251 | * Patch by Brad Kemp, 18 Mar 2004: |
| 252 | prevent machine checks during a PCI scan |
| 253 | |
| 254 | * Patch by Pierre Aubert, 18 Mar 2004: |
| 255 | Fix string cleaning in IDE identification |
| 256 | |
wdenk | eeb1b77 | 2004-03-23 22:53:55 +0000 | [diff] [blame] | 257 | * Patch by Pierre Aubert, 18 Mar 2004: |
| 258 | - Unify video mode handling for Chips & Technologies 69000 Video |
| 259 | chip and Silicon Motion SMI 712/710/810 Video chip |
| 260 | - Add selection of the video output (CRT or LCD) via 'videoout' |
| 261 | environment variable for the Silicon Motion |
| 262 | - README update |
| 263 | |
| 264 | * Patch by Pierre Aubert, 18 Mar 2004: |
| 265 | include/common.h typo fix |
| 266 | |
| 267 | * Patches by Tolunay Orkun, 17 Mar 2004: |
| 268 | - Add support for bd->bi_iic_fast[] initialization via environment |
| 269 | variable "i2cfast" (CONFIG_I2CFAST) |
| 270 | - Add "i2cfast" u-boot environment variable support for csb272 |
| 271 | |
wdenk | 27aa818 | 2004-03-23 22:37:33 +0000 | [diff] [blame] | 272 | * Patch by Carl Riechers, 17 Mar 2004: |
| 273 | Ignore '\0' characters in console input for use with telnet and |
| 274 | telco pads. |
| 275 | |
| 276 | * Patch by Leon Kukovec, 17 Mar 2004: |
| 277 | typo fix for strswab prototype #ifdef |
| 278 | |
wdenk | 4b9206e | 2004-03-23 22:14:11 +0000 | [diff] [blame] | 279 | * Patches by Thomas Viehweger, 16 Mar 2004: |
| 280 | - show PCI clock frequency on MPC8260 systems |
| 281 | - add FCC_PSMR_RMII flag for HiP7 processors |
| 282 | - in do_jffs2_fsload(), take load address from load_addr if not set |
| 283 | explicit, update load_addr otherwise |
| 284 | - replaced printf by putc/puts when no formatting is needed |
| 285 | (smaller code size, faster execution) |
| 286 | |
wdenk | 109c0e3 | 2004-03-23 21:43:07 +0000 | [diff] [blame] | 287 | * Patch by Phillippe Robin, 16 Mar 2004: |
| 288 | avoid dereferencing NULL pointer in lib_arm/armlinux.c |
| 289 | |
| 290 | * Patch by Stephen Williams, 15 Mar 2004: |
| 291 | Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation |
| 292 | |
| 293 | * Patch by Tolunay Orkun, 15 Mar 2004: |
| 294 | Initialize bi_opbfreq to real OPB frequency via get_OPB_freq() |
| 295 | |
| 296 | * Patch by Travis Sawyer, 15 Mar 2004: |
| 297 | Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port |
| 298 | |
wdenk | efa329c | 2004-03-23 20:18:25 +0000 | [diff] [blame] | 299 | * Add start-up delay to make sure power has stabilized before |
| 300 | attempting to switch on USB on SX1 board. |
| 301 | |
| 302 | * Patch by Josef Wagner, 18 Mar 2004: |
| 303 | - Add support for MicroSys XM250 board (PXA255) |
| 304 | - Add support for MicroSys PM828 board (MPC8280) |
| 305 | - Add support for 32 MB Flash on PM825/826 |
| 306 | - new SDRAM refresh rate for PM825/PM826 |
| 307 | - added support for MicroSys PM520 (MPC5200) |
| 308 | - replaced Query by Identify command in CPU86/flash.c |
| 309 | to support 28F160F3B |
| 310 | |
| 311 | * Fix wrap around problem with udelay() on ARM920T |
| 312 | |
| 313 | * Add support for Macronix flash on TRAB board |
| 314 | |
wdenk | 7d7ce41 | 2004-03-17 01:13:07 +0000 | [diff] [blame] | 315 | * Patch by Pierre Aubert, 15 Mar 2004: |
| 316 | Fix buffer overflow in IDE identification |
| 317 | |
| 318 | * Fix power-off of LCD for out-of-band temperatures on LWMON board |
| 319 | |
| 320 | * Remove redundand #define in IceCube.h |
| 321 | |
wdenk | d9df1f4 | 2004-03-15 09:00:01 +0000 | [diff] [blame] | 322 | * Patch by Steven Scholz, 27 Feb 2004: |
| 323 | - Adding get_ticks() and get_tbclk() for AT91RM9200 |
| 324 | - Many white space fixes in cpu/at91rm9200/interrupts.c |
| 325 | |
| 326 | * Patches by Steven Scholz, 20 Feb 2004: |
| 327 | some cleanup in AT91RM9200 related code |
| 328 | |
wdenk | 855a496 | 2004-03-14 18:23:55 +0000 | [diff] [blame] | 329 | * Patches by Travis Sawyer, 12 Mar 2004: |
| 330 | - Fix Gigabit Ethernet support for 440GX |
| 331 | - Add Gigabit Ethernet Support to MII PHY utilities |
| 332 | |
| 333 | * Patch by Brad Kemp, 12 Mar 2004: |
| 334 | Fixes for drivers/cfi_flash.c: |
| 335 | - Better support for x8/x16 implementations |
| 336 | - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE |
| 337 | - Added defines for AMD command and address constants |
| 338 | |
| 339 | * Patch by Leon Kukovec, 12 Mar 2004: |
| 340 | Fix get_dentfromdir() to correctly handle deleted dentries |
wdenk | 42dfe7a | 2004-03-14 22:25:36 +0000 | [diff] [blame] | 341 | |
wdenk | 855a496 | 2004-03-14 18:23:55 +0000 | [diff] [blame] | 342 | * Patch by George G. Davis, 11 Mar 2004: |
| 343 | Remove hard coded network settings in TI OMAP1610 H2 |
| 344 | default board config |
| 345 | |
| 346 | * Patch by George G. Davis, 11 Mar 2004: |
| 347 | add support for ADS GraphicsClient+ board. |
| 348 | |
wdenk | 7d7ce41 | 2004-03-17 01:13:07 +0000 | [diff] [blame] | 349 | * Patch by Pierre Aubert, 11 Mar 2004: |
wdenk | 4b248f3 | 2004-03-14 16:51:43 +0000 | [diff] [blame] | 350 | - add bitmap command and splash screen support in cfb console |
| 351 | - add [optional] origin in the bitmap display command |
| 352 | |
| 353 | * Patch by Travis Sawyer, 11 Mar 2004: |
| 354 | Fix ocotea board early init interrupt setup. |
| 355 | |
| 356 | * Patch by Thomas Viehweger, 11 Mar 2004: |
| 357 | Remove redundand code; add PCI-specific bits to include/mpc8260.h |
| 358 | |
wdenk | aaf224a | 2004-03-14 15:20:55 +0000 | [diff] [blame] | 359 | * Patch by Stephan Linz, 09 Mar 2004 |
| 360 | - Add support for the SSV ADNP/ESC1 (Nios Softcore) |
| 361 | |
| 362 | * Patch by George G. Davis, 9 Mar 2004: |
| 363 | fix recent build failure for SA1100 target |
| 364 | |
| 365 | * Patch by Travis Sawyer, 09 Mar 2004: |
| 366 | Support native interrupt mode for the IBM440GX. |
| 367 | Previously it was running in 440GP compatibility mode. |
| 368 | |
wdenk | 3d3befa | 2004-03-14 15:06:13 +0000 | [diff] [blame] | 369 | * Patch by Philippe Robin, 09 Mar 2004: |
| 370 | Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference |
| 371 | Platform support. |
| 372 | |
| 373 | * Patch by Masami Komiya, 08 Mar 2004: |
| 374 | Don't overwrite server IP address or boot file name |
| 375 | when the boot server does not return values |
| 376 | |
wdenk | 7d7ce41 | 2004-03-17 01:13:07 +0000 | [diff] [blame] | 377 | * Patch by Tolunay Orkun, 5 Mar 2004: |
wdenk | 3d3befa | 2004-03-14 15:06:13 +0000 | [diff] [blame] | 378 | Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC |
| 379 | |
wdenk | 4d13cba | 2004-03-14 14:09:05 +0000 | [diff] [blame] | 380 | * Patch by Tolunay Orkun, 5 Mar 2004: |
| 381 | Fix early board initialization for Cogent CSB272 board |
| 382 | |
| 383 | * Patch by Ed Okerson, 3 Mar 2004: |
| 384 | fix CFI flash writes for little endian systems |
| 385 | |
| 386 | * Patch by Reinhard Meyer, 01 Mar 2004: |
| 387 | generalize USB and IDE support for MPC5200 with according |
| 388 | changes to IceCube.h and TOP5200.h |
| 389 | add Am29LV256 256 MBit FLASH support for TOP5200 boards |
| 390 | add info about USB and IDE to README |
| 391 | |
wdenk | c3f9d49 | 2004-03-14 00:59:59 +0000 | [diff] [blame] | 392 | * Patch by Yuli Barcohen, 4 Mar 2004: |
| 393 | Fix problems with GCC 3.3.x which changed handling of global |
| 394 | variables explicitly initialized to zero (now in .bss instead of |
| 395 | .data as before). |
| 396 | |
| 397 | * Patch by Leon Kukovec, 02 Mar 2004: |
| 398 | add strswab() to fix IDE LBA capacity, firmware and model numbers |
| 399 | on little endian machines |
| 400 | |
| 401 | * Patch by Masami Komiya, 02 Mar 2004: |
| 402 | - Remove get_ticks() from NFS code |
| 403 | - Add verification of RPC transaction ID |
| 404 | |
| 405 | * Patch by Pierre Aubert, 02 Mar 2004: |
| 406 | cleanup for IDE and USB drivers for MPC5200 |
| 407 | |
| 408 | * Patch by Travis Sawyer, 01 Mar 2004: |
wdenk | 0e6d798 | 2004-03-14 00:07:33 +0000 | [diff] [blame] | 409 | Ocotea: |
| 410 | - Add IBM PPC440GX Ref Platform support (Ocotea) |
| 411 | Original code by Paul Reynolds <PaulReynolds@lhsolutions.com> |
| 412 | Adapted to U-Boot and 440GX port |
| 413 | 440gx_enet.c: |
| 414 | - Add gracious handling of all Ethernet Pin Selections for 440GX |
| 415 | - Add RGMII selection for Cicada CIS8201 Gigabit PHY |
| 416 | ppc440.h: |
| 417 | - Add needed bit definitions |
| 418 | - Fix formatting |
| 419 | |
| 420 | * Patch by Carl Riechers, 1 Mar 2004: |
| 421 | Add PPC440GX prbdv0 divider to fix memory clock calculation. |
| 422 | |
| 423 | * Patch by Stephan Linz, 27 Feb 2004 |
| 424 | - avoid problems for targets without NFS download support |
| 425 | |
wdenk | c40b295 | 2004-03-13 23:29:43 +0000 | [diff] [blame] | 426 | * Patch by Rune Torgersen, 27 Feb 2004: |
| 427 | - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA) |
| 428 | - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF) |
| 429 | - Added support for 64bit strtoul (CFG_64BIT_STRTOUL) |
| 430 | |
| 431 | * Patch by Masami Komiya, 27 Feb 2004: |
| 432 | Fix rarpboot: add autoload by NFS |
| 433 | |
| 434 | * Patch by Dan Eisenhut, 26 Feb 2004: |
| 435 | fix flash_write return value in saveenv |
| 436 | |
| 437 | * Patch by Stephan Linz, 11 Dec 2003 |
| 438 | expand config.mk to avoid trigraph warnings on NIOS |
| 439 | |
| 440 | * Rename "BMS2003" board into "HMI10" |
| 441 | |
wdenk | 6629d2f | 2004-03-12 15:38:25 +0000 | [diff] [blame] | 442 | * SX1 patches: use "serial#" for USB serial #; use redundand environment |
| 443 | storage; auto-set console on USB port (using preboot command) |
| 444 | |
wdenk | 232c150 | 2004-03-12 00:14:09 +0000 | [diff] [blame] | 445 | * Add support for SX1 mobile phone; add support for USB-based console |
| 446 | (enable with "setenv stdout usbtty; setenv stdin usbtty") |
| 447 | |
wdenk | 79d696f | 2004-03-11 22:46:36 +0000 | [diff] [blame] | 448 | * Fix LOWBOOT configuration for MPC5200 with DDR memory |
| 449 | |
wdenk | f8d813e | 2004-03-02 14:05:39 +0000 | [diff] [blame] | 450 | * Fix SDRAM timings for LITE5200 / IceCube board |
| 451 | |
| 452 | * Handle Auti-MDIX / connection status for INCA-IP |
| 453 | |
| 454 | * Fix USB problems when attempting to read 0 bytes |
| 455 | |
wdenk | e7c8568 | 2004-02-27 08:21:54 +0000 | [diff] [blame] | 456 | * Patch by Travis Sawyer, 26 Feb 2004: |
| 457 | Fix broken compile for XPEDITE1K target. |
| 458 | |
| 459 | * Patch by Stephan Linz, 26 Feb 2004: |
| 460 | Bug fix for NFS code on NIOS targets |
wdenk | 232c150 | 2004-03-12 00:14:09 +0000 | [diff] [blame] | 461 | |
wdenk | e7c8568 | 2004-02-27 08:21:54 +0000 | [diff] [blame] | 462 | * Patch by Stephen Williams, 26 Feb 2004: |
| 463 | Break up SystemACE reads of large block counts |
| 464 | |
wdenk | 132ba5f | 2004-02-27 08:20:54 +0000 | [diff] [blame] | 465 | * Patch by Pierre Aubert, 26 Feb 2004 |
| 466 | add IDE support for MPC5200 |
| 467 | |
| 468 | * Patch by Masami Komiya, 26 Feb 2004: |
| 469 | add autoload via NFS |
| 470 | |
| 471 | * Patch by Stephen Williams |
| 472 | Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses |
| 473 | elsewhere in the source. |
| 474 | |
wdenk | 11dadd5 | 2004-02-27 00:07:27 +0000 | [diff] [blame] | 475 | * Patch by Steven Scholz, 25 Feb 2004: |
| 476 | - Timeouts in FPGA code should be based on CFG_HZ |
| 477 | - Minor cleanup in code for Altera FPGA ACEX1K |
| 478 | |
| 479 | * Patch by Steven Scholz, 25 Feb 2004: |
| 480 | Changed "Directory Hierarchy" section in README |
| 481 | |
| 482 | * Patch by Masami Komiya, 25 Feb 2004: |
| 483 | Reduce copy count in nfs_read_reply() of NFS code |
| 484 | |
wdenk | 80885a9 | 2004-02-26 23:46:20 +0000 | [diff] [blame] | 485 | * Patch by Markus Pietrek, 24 Feb 2004: |
| 486 | NS9750 DevBoard added |
| 487 | |
wdenk | 132ba5f | 2004-02-27 08:20:54 +0000 | [diff] [blame] | 488 | * Patch by Pierre Aubert, 24 Feb 2004 |
wdenk | 80885a9 | 2004-02-26 23:46:20 +0000 | [diff] [blame] | 489 | add USB support for MPC5200 |
| 490 | |
| 491 | * Patch by Steven Scholz, 24 Feb 2004: |
| 492 | - fix MII commands to use values from last command |
| 493 | |
| 494 | * Patch by Torsten Demke, 24 Feb 2004: |
| 495 | Add support for the eXalion platform (SPSW-8240, F-30, F-300) |
| 496 | |
wdenk | 0c852a2 | 2004-02-26 23:01:04 +0000 | [diff] [blame] | 497 | * Patch by Rahul Shanbhag, 19 Feb 2004: |
| 498 | Fixes for for OMAP1610 board: |
| 499 | - shift some IRQ specific code to platform.S file |
| 500 | - remove duplicatewatchdog reset code from start.S |
| 501 | |
| 502 | * Make Auto-MDIX Support configurable on INCA-IP board |
| 503 | |
| 504 | * Fix license for mkimage tool |
| 505 | |
wdenk | a084f7d | 2004-02-24 22:33:21 +0000 | [diff] [blame] | 506 | * Patch by Masami Komiya, 24 Feb 2004: |
| 507 | Update NetBootFileXferSize in NFS code |
| 508 | |
| 509 | * Patch by Scott McNutt, 24 Feb 2004: |
| 510 | fix packet length in NFS code |
| 511 | |
wdenk | cbd8a35 | 2004-02-24 02:00:03 +0000 | [diff] [blame] | 512 | * Patch by Masami Komiy, 22 Feb 2004: |
| 513 | Add support for NFS for file download |
| 514 | |
wdenk | 074cff0 | 2004-02-24 00:16:43 +0000 | [diff] [blame] | 515 | * Patch by Andrea Scian, 17 Feb 2004: |
| 516 | Add support for S3C44B0 processor and DAVE B2 board |
| 517 | |
| 518 | * Patch by Steven Scholz, 20 Feb 2004: |
| 519 | - Add support for MII commands on AT91RM9200 boards |
| 520 | - some cleanup in AT91RM9200 ethernet code |
| 521 | |
wdenk | 028ab6b | 2004-02-23 23:54:43 +0000 | [diff] [blame] | 522 | * Patch by Peter Ryser, 20 Feb 2004: |
| 523 | Add support for the Xilinx ML300 platform |
| 524 | |
| 525 | * Patch by Stephan Linz, 17 Feb 2004: |
| 526 | Fix watchdog support for NIOS |
| 527 | |
| 528 | * Patch by Josh Fryman, 16 Feb 2004: |
| 529 | Fix byte-swapping for cfi_flash.c for different bus widths |
| 530 | |
| 531 | * Patch by Jon Diekema, 14 Jeb 2004: |
| 532 | Remove duplicate "FPGA Support" notes from the README file |
| 533 | |
wdenk | 63e73c9 | 2004-02-23 22:22:28 +0000 | [diff] [blame] | 534 | * Patches by Reinhard Meyer, 14 Feb 2004: |
| 535 | - update board/emk tree; use common flash driver |
| 536 | - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c |
| 537 | [adapted for other PPC CPUs -- wd] |
| 538 | - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c |
| 539 | |
| 540 | * Patch by Jon Diekema, 13 Feb 2004: |
| 541 | Call show_boot_progress() whenever POST "FAILED" is printed. |
| 542 | |
| 543 | * Patch by Nishant Kamat, 13 Feb 2004: |
| 544 | Add support for TI OMAP1610 H2 Board |
| 545 | Fixes for cpu/arm926ejs/interrupt.c |
| 546 | (based on Richard Woodruff's patch for arm925, 16 Oct 03) |
| 547 | Fix for a timer bug in OMAP1610 Innovator |
| 548 | Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 |
| 549 | |
| 550 | * Patches by Stephan Linz, 12 Feb 2004: |
| 551 | - add support for NIOS timer with variable period preload counter value |
| 552 | - prepare POST framework support for NIOS targets |
| 553 | |
| 554 | * Patch by Denis Peter, 11 Feb 2004: |
| 555 | add POST support for the MIP405 board |
| 556 | |
wdenk | cd0a9de | 2004-02-23 20:48:38 +0000 | [diff] [blame] | 557 | * Patch by Laurent Mohin, 10 Feb 2004: |
| 558 | Fix buffer overflow in common/usb.c |
| 559 | |
| 560 | * Patch by Tolunay Orkun, 10 Feb 2004: |
| 561 | Add support for Cogent CSB272 board |
| 562 | |
wdenk | 2d1a537 | 2004-02-23 19:30:57 +0000 | [diff] [blame] | 563 | * Patch by Thomas Elste, 10 Feb 2004: |
| 564 | Add support for NET+50 CPU and ModNET50 board |
| 565 | |
| 566 | * Patch by Sam Song, 10 Feb 2004: |
| 567 | Fix typos in cfi_flash.c |
| 568 | |
| 569 | * Patch by Leon Kukovec, 10 Feb 2004 |
| 570 | Fixed long dir entry slot id calculation in get_vfatname |
| 571 | |
| 572 | * Patch by Robin Gilks, 10 Feb 2004: |
| 573 | add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==, |
| 574 | !=, <>, <, >, <=, >=) |
| 575 | |
wdenk | 3f85ce2 | 2004-02-23 16:11:30 +0000 | [diff] [blame] | 576 | * Fix problem with side effects in macros in include/usb.h |
| 577 | |
| 578 | * Patch by David Benson, 13 Nov 2003: |
| 579 | bug 841358 - fix TFTP download size limit |
| 580 | |
| 581 | * Fixing bug 850768: |
| 582 | improper flush_cache() in load_serial() |
| 583 | |
| 584 | * Fixing bug 834943: |
| 585 | MPC8540 - missing volatile declarations |
| 586 | |
| 587 | * Patch by Stephen Williams, 09 Feb 2004: |
| 588 | Add support for Xilinx SystemACE chip: |
| 589 | - New files common/cmd_ace.c and include/systemace.h |
| 590 | - Hook systemace support into cmd_fat and the partition manager |
| 591 | |
| 592 | * Patch by Travis Sawyer, 09 Feb 2004: |
| 593 | Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux |
| 594 | |
wdenk | 3c74e32 | 2004-02-22 23:46:08 +0000 | [diff] [blame] | 595 | * Patch by Travis Sawyer, 09 Feb 2004: |
| 596 | o 440GX: |
| 597 | - Fix PCI Indirect access for type 1 config cycles with ppc440. |
| 598 | - Add phymode for 440 enet |
| 599 | - fix pci pre init |
| 600 | o XPedite1K: |
| 601 | - Change board_pre_init to board_early_init_f |
| 602 | - Add user flash to bus controller setup |
| 603 | - Fix pci pre init |
| 604 | - Fix is_pci_host to check GPIO for monarch bit |
| 605 | - Force xpedite1k to pci conventional mode (via #define option) |
| 606 | |
| 607 | * Patch by Brad Kemp, 4 Feb 2004: |
| 608 | - handle the machine check that is generated during the PCI scans |
| 609 | on 82xx processors. |
| 610 | - define the registers used in the IMMR by the PCI subsystem. |
| 611 | |
| 612 | * Patch by Pierre Aubert, 03 Feb 2004: |
| 613 | cpu/mpc5xxx/start.S: copy MBAR into SPR311 |
| 614 | |
| 615 | * Patch by Jeff Angielski, 03 Feb 2004: |
| 616 | Fix copy & paste error in cpu/mpc8260/pci.c |
| 617 | |
| 618 | * Patch by Reinhard Meyer, 24 Jan 2004: |
| 619 | Fix typo in cpu/mpc5xxx/pci_mpc5200.c |
| 620 | |
wdenk | cf56e11 | 2004-02-20 22:02:48 +0000 | [diff] [blame] | 621 | * Add Auto-MDIX support for INCA-IP |
| 622 | |
wdenk | bf9e3b3 | 2004-02-12 00:47:09 +0000 | [diff] [blame] | 623 | * Some code cleanup |
| 624 | |
| 625 | * Patch by Josef Baumgartner, 10 Feb 2004: |
| 626 | Fixes for Coldfire port |
| 627 | |
| 628 | * Patch by Brad Kemp, 11 Feb 2004: |
| 629 | Fix CFI flash driver problems |
| 630 | |
wdenk | a2d18bb | 2004-02-11 21:35:18 +0000 | [diff] [blame] | 631 | * Make sure to use a bus clock divider of 2 only when running TQM8xxM |
| 632 | modules at CPU clock frequencies above 66 MHz. |
wdenk | bf9e3b3 | 2004-02-12 00:47:09 +0000 | [diff] [blame] | 633 | |
wdenk | a2d18bb | 2004-02-11 21:35:18 +0000 | [diff] [blame] | 634 | * Optimize flash programming speed for LWMON (by another 100% :-) |
| 635 | |
wdenk | cd37d9e | 2004-02-10 00:03:41 +0000 | [diff] [blame] | 636 | * Patch by Jian Zhang, 3 Feb 2004: |
| 637 | - Changed the incorrect FAT12BUFSIZE |
| 638 | - data_begin in fsdata can be negative. Changed it to be short. |
| 639 | |
wdenk | ec4c544 | 2004-02-09 23:12:24 +0000 | [diff] [blame] | 640 | * Patches by Stephan Linz, 30 Jan 2004: |
| 641 | 1: - board/altera/common/flash.c:flash_erase(): |
| 642 | o allow interrupts befor get_timer() call |
| 643 | o check-up each erased sector and avoid unexpected timeouts |
| 644 | - board/altera/dk1c20/dk1s10.c:board_early_init_f(): |
| 645 | o enclose sevenseg_set() in cpp condition |
| 646 | - remove the ASMI configuration for DK1S10_standard_32 (never present) |
| 647 | - fix some typed in mistakes in the NIOS documentation |
| 648 | 2: - split DK1C20 configuration into several header files: |
| 649 | o two new files for each NIOS CPU description |
| 650 | o U-Boot related part is remaining in DK1C20.h |
| 651 | 3: - split DK1S10 configuration into several header files: |
| 652 | o two new files for each NIOS CPU description |
| 653 | o U-Boot related part is remaining in DK1S10.h |
| 654 | 4: - Add support for the Microtronix Linux Development Kit |
| 655 | NIOS CPU configuration at the Altera Nios Development Kit, |
| 656 | Stratix Edition (DK-1S10) |
| 657 | 5: - Add documentation for the Altera Nios Development Kit, |
| 658 | Stratix Edition (DK-1S10) |
| 659 | 6: - Add support for the Nios Serial Peripharel Interface (SPI) |
| 660 | (master only) |
| 661 | 7: - Add support for the common U-Boot SPI framework at |
| 662 | RTC driver DS1306 |
| 663 | |
wdenk | b98fff1 | 2004-02-09 20:51:26 +0000 | [diff] [blame] | 664 | * Patch by Rahul Shanbhag, 28 Jan 2004: |
| 665 | Fix flash protection/locking handling for OMAP1610 innovator board. |
| 666 | |
| 667 | * Patch by Rolf Peukert, 28 Jan 2004: |
| 668 | fix flash write problems on CSB226 board (write with 32 bit bus width) |
| 669 | |
| 670 | * Patches by Mark Jonas, 16 Jan 2004: |
| 671 | - fix rounding error when calculating baudrates for MPC5200 PSCs |
| 672 | - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same |
| 673 | time which is not supported |
| 674 | |
wdenk | 5653fc3 | 2004-02-08 22:55:38 +0000 | [diff] [blame] | 675 | * Patch by Yuli Barcohen, 26 Jan 2004: |
| 676 | Allow bzip2 compression for small memory footprint boards |
| 677 | |
| 678 | * Patch by Brad Kemp, 21 Jan 2004: |
| 679 | Add support for CFI flash driver for both the Intel and the AMD |
| 680 | command sets. |
| 681 | |
| 682 | * Patch by Travis Sawyer, 20 Jan 2004: |
| 683 | Fix pci bridge auto enumeration of sibling p2p bridges. |
| 684 | |
| 685 | * Patch by Tolunay Orkun, 12 Jan 2004: |
| 686 | Add some delays as needed for Intel LXT971A PHY support |
| 687 | |
| 688 | * Patches by Stephan Linz, 09 Jan 2004: |
| 689 | - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c |
| 690 | - make DK1C20 board configuration related to ASMI conform to |
| 691 | documentation |
| 692 | |
wdenk | f6e20fc | 2004-02-08 19:38:38 +0000 | [diff] [blame] | 693 | * Patch by Anders Larsen, 09 Jan 2004: |
| 694 | |
| 695 | ARM memory layout fixes: the abort-stack is now set up in the |
| 696 | correct RAM area, and the BSS is zeroed out as it should be. |
| 697 | |
| 698 | Furthermore, the magic variables 'armboot_end' and 'armboot_end_data' |
| 699 | of the linker scripts are replaced by '__bss_start' and '_end', |
| 700 | resp., which is a further step to eliminate unnecessary differences |
| 701 | between the implementation of the CPU architectures. |
| 702 | |
wdenk | f4863a7 | 2004-02-07 01:27:10 +0000 | [diff] [blame] | 703 | * Patch by liang a lei, 9 Jan 2004: |
| 704 | Fix Intel 28F128J3 ID in include/flash.h |
| 705 | |
| 706 | * Patch by Masami Komiya, 09 Jan 2004: |
| 707 | add support for TB0229 board (NEC VR4131 MIPS processor) |
| 708 | |
| 709 | * Patch by Leon Kukovec, 12 Dec 2003: |
| 710 | changed extern __inline__ into static __inline__ in |
| 711 | include/linux/byteorder/swab.h |
| 712 | |
wdenk | ba56f62 | 2004-02-06 23:19:44 +0000 | [diff] [blame] | 713 | * Patch by Travis Sawyer, 30 Dec 2003: |
| 714 | Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, |
| 715 | select MDI port based on enabled EMAC device. |
| 716 | Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX |
| 717 | base PrPMC board. |
| 718 | |
wdenk | a6cccae | 2004-02-06 21:48:22 +0000 | [diff] [blame] | 719 | * Patch by Wolter Kamphuis, 15 Dec 2003: |
| 720 | made CONFIG_SILENT_CONSOLE usable on all architectures |
| 721 | |
| 722 | * Disable date command on TQM866M - there is no RTC on MPC866 |
| 723 | |
wdenk | 75d1ea7 | 2004-01-31 20:06:54 +0000 | [diff] [blame] | 724 | * Fix variable CPU clock for MPC859/866 systems for low CPU clocks |
| 725 | |
wdenk | 6876609 | 2004-01-29 09:22:58 +0000 | [diff] [blame] | 726 | * Implement adaptive SDRAM timing configuration based on actual CPU |
| 727 | clock frequency for INCA-IP; fix problem with board hanging when |
| 728 | switching from 150MHz to 100MHz |
| 729 | |
| 730 | * Add PCMCIA CS support for BMS2003 board |
| 731 | |
wdenk | c178d3d | 2004-01-24 20:25:54 +0000 | [diff] [blame] | 732 | * Add variable CPU clock for MPC859/866 systems (so far only TQM866M): |
| 733 | see doc/README.MPC866 for details; |
| 734 | implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866; |
| 735 | calculate CPU clock frequency from PLL register values. |
| 736 | |
| 737 | * Add support for 128 MB RAM on TQM8xxL/M modules |
| 738 | |
wdenk | ef97873 | 2004-01-21 20:46:28 +0000 | [diff] [blame] | 739 | * Fix PS/2 keyboard problem caused by statically initialized variable |
| 740 | pointing to a location in flash |
| 741 | |
| 742 | * Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130. |
| 743 | |
wdenk | c837dcb | 2004-01-20 23:12:12 +0000 | [diff] [blame] | 744 | * The PS/2 mux on the BMS2003 board needs 450 ms after power on |
| 745 | before we can access it; add delay in case we are faster (with no |
| 746 | CF card inserted) |
| 747 | |
| 748 | * Cleanup of some init functions |
| 749 | |
| 750 | * Make sure SCC Ethernet is always stopped by the time we boot Linux |
| 751 | to avoid Linux crashes by early packets coming in. |
| 752 | |
| 753 | * Accelerate flash accesses on LWMON board by using buffered writes |
| 754 | |
wdenk | b0aef11 | 2004-01-18 18:21:54 +0000 | [diff] [blame] | 755 | * Fix typo in Makefile; |
| 756 | fix problem with PARTNUM detection |
| 757 | |
wdenk | 1c43771 | 2004-01-16 00:30:56 +0000 | [diff] [blame] | 758 | * Patch by Reinhard Meyer, 09 Jan 2004: |
| 759 | - add RTC support for MPC5200 based boards (requires RTC_XTAL) |
| 760 | |
| 761 | * Add support for IDE LED on BMS2003 board |
| 762 | (exclusive with status LED!) |
| 763 | |
| 764 | * Add support for PS/2 keyboard (used with PS/2 multiplexor on |
| 765 | BMS2003 board) |
| 766 | |
| 767 | * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004: |
| 768 | Add common files for "emk" boards |
| 769 | |
wdenk | c83bf6a | 2004-01-06 22:38:14 +0000 | [diff] [blame] | 770 | * Add a common get_ram_size() function and modify the the |
| 771 | board-specific files to invoke that common implementation. |
| 772 | |
| 773 | ====================================================================== |
wdenk | b34ff81 | 2004-01-06 11:13:56 +0000 | [diff] [blame] | 774 | Changes for U-Boot 1.0.1: |
wdenk | 5cf9da4 | 2003-11-07 13:42:26 +0000 | [diff] [blame] | 775 | ====================================================================== |
| 776 | |
wdenk | b34ff81 | 2004-01-06 11:13:56 +0000 | [diff] [blame] | 777 | * Set default clock for INCA-IP to 150 MHz |
| 778 | |
wdenk | a522fa0 | 2004-01-04 22:51:12 +0000 | [diff] [blame] | 779 | * Make BMS2003 use a separate config file to avoid #ifdef mess; |
| 780 | add I2C support; add support for DS1337 RTC |
| 781 | |
| 782 | * Add CompactFlash support for BMS2003 board |
| 783 | |
| 784 | * Add support for status LED on BMS2003 board |
| 785 | |
wdenk | 180d3f7 | 2004-01-04 16:28:35 +0000 | [diff] [blame] | 786 | * Patch by Scott McNutt, 02 Jan 2004: |
| 787 | Add support for the Nios Active Serial Memory Interface (ASMI) |
| 788 | on Cyclone devices |
| 789 | |
| 790 | * Patch by Andrea Marson, 16 Dec 2003: |
| 791 | Add support for the PPChameleon ME and HI modules |
| 792 | |
| 793 | * Patch by Yuli Barcohen, 22 Dec 2003: |
| 794 | Add support for Motorola DUET ADS board (MPC87x/88x) |
| 795 | |
wdenk | dd875c7 | 2004-01-03 21:24:46 +0000 | [diff] [blame] | 796 | * Patch by Robert Schwebel, 15 Dec 2003: |
| 797 | add support for cramfs (uses JFFS2 command interface) |
| 798 | |
wdenk | c935d3b | 2004-01-03 19:43:48 +0000 | [diff] [blame] | 799 | * Patches by Stephan Linz, 11 Dec 2003: |
| 800 | - more documentation for NIOS port |
| 801 | - new struct nios_pio_t, struct nios_spi_t |
| 802 | - Reconfiguration for NIOS Development Kit DK1C20: |
| 803 | o move board related code from board/dk1c20 |
| 804 | to board/altera/dk1c20 |
| 805 | o create a new common source path board/altera/common |
| 806 | and move generic flash access stuff into it |
| 807 | o change/expand configuration file DK1C20.h |
| 808 | - Add support for NIOS Development Kit DK1S10 |
| 809 | - Add status LED support for NIOS systems |
| 810 | - Add dual 7-segment LED support for Altera NIOS DevKits |
| 811 | |
wdenk | 3a473b2 | 2004-01-03 00:43:19 +0000 | [diff] [blame] | 812 | * Patch by Ronen Shitrit, 10 Dec 2003: |
| 813 | Add support for the Marvell DB64360 / DB64460 development boards |
| 814 | |
| 815 | * Patch by Detlev Zundel, 10 Dec 2003: |
| 816 | fix dependency problem in examples/Makefile |
| 817 | |
wdenk | b6e4c40 | 2004-01-02 16:05:07 +0000 | [diff] [blame] | 818 | * Patch by Denis Peter, 8 Dec 2003 |
| 819 | - add support for the PATI board (MPC555) |
| 820 | - add SPI support for the MPC5xx |
| 821 | |
| 822 | * Patch by Anders Larsen, 08 Dec 2003: |
| 823 | add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG |
| 824 | to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target; |
| 825 | cleanup some redundand #defines |
| 826 | |
wdenk | 63f3491 | 2004-01-02 15:01:32 +0000 | [diff] [blame] | 827 | * Patch by André Schwarz, 8 Dec 2003: |
| 828 | fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM): |
| 829 | - TX and RX deskriptors must be quad-word aligned |
| 830 | - does not work with only one TX deskriptor |
| 831 | - standard reset method does not work |
| 832 | |
| 833 | * Patch by Masami Komiya, 08 Dec 2003: |
| 834 | add RTL8139 ethernet driver |
| 835 | |
| 836 | * Patches by Ed Okerson, 07 Dec 2003: |
| 837 | - fix ethernet for the AU1x00 processors in little-endian mode. |
| 838 | - extend memsetup.S for the AU1x00 processors in BE and LE modes |
| 839 | |
wdenk | d4ca31c | 2004-01-02 14:00:00 +0000 | [diff] [blame] | 840 | * Minor code cleanup (coding style) |
| 841 | |
| 842 | * Patch by Reinhard Meyer, 30 Dec 2003: |
| 843 | - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE, |
| 844 | - added CONFIG_PHY_ADDR to include/configs/IceCube.h, |
| 845 | - turned debug print of PHY registers into a function (called in two places) |
| 846 | - added support for EMK MPC5200 based modules |
| 847 | |
| 848 | * Fix MPC8xx PLPRCR_MFD_SHIFT typo |
| 849 | |
| 850 | * Add support for TQM866M modules |
| 851 | |
| 852 | * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash) |
| 853 | |
| 854 | * Fix a few compiler warnings |
| 855 | |
wdenk | c189600 | 2003-12-28 11:44:59 +0000 | [diff] [blame] | 856 | * Patch by Reinhard Meyer, 28 Dec 2003: |
| 857 | Add initial support for TOP5200 board |
| 858 | |
wdenk | 7cb22f9 | 2003-12-27 19:24:54 +0000 | [diff] [blame] | 859 | * Make CPU clock on ICA-IP board controllable by a "cpuclk" |
| 860 | environment variable which can set to "100", "133", or "150". The |
| 861 | CPU clock will be configured accordingly upon next reboot. Other |
| 862 | values are ignored. In case of an invalid or undefined "cpuclk" |
| 863 | value, the compile-time default CPU clock speed will be used. |
| 864 | |
| 865 | * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory |
| 866 | window that is used to access the UART registers by the Linux driver) |
| 867 | |
| 868 | * Patch by Reinhard Meyer, 20 Dec 2003: |
| 869 | Fix clock calculation for the MPC5200 for higher clock frequencies |
| 870 | (above 2**32 / 10 = 429.5 MHz). |
| 871 | |
| 872 | * Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration |
| 873 | |
wdenk | b2001f2 | 2003-12-20 22:45:10 +0000 | [diff] [blame] | 874 | * Fix IceCube CLKIN configuration (it's 33.000000MHz) |
| 875 | |
| 876 | * Add new configuration for IceCube board with DDR memory |
| 877 | |
| 878 | * Update TRAB memory configurations |
| 879 | |
wdenk | 5c745d2 | 2003-12-12 00:02:26 +0000 | [diff] [blame] | 880 | * Add JFFS2 support for INCA-IP board |
| 881 | |
stroese | d4f58f7 | 2003-12-09 15:04:55 +0000 | [diff] [blame] | 882 | * Patch by Bill Hargen, 09 Dec 2003: |
| 883 | - BUBINGA405EP: changed flash driver to protect top sector containing |
| 884 | first instruction. |
| 885 | - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM. |
| 886 | - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access). |
| 887 | - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1). |
| 888 | - 405EP: added/fixed support for "reginfo" command. |
| 889 | - 4xx: removed spurious MII error messages on "mii info" command. |
| 890 | |
wdenk | 4e5ca3e | 2003-12-08 01:34:36 +0000 | [diff] [blame] | 891 | * Patch by Bernhard Kuhn, 28 Nov 2003: |
| 892 | add support for Coldfire CPU |
| 893 | add support for Motorola M5272C3 and M5282EVB boards |
| 894 | |
wdenk | 9fd5e31 | 2003-12-07 23:55:12 +0000 | [diff] [blame] | 895 | * Patch by Pierre Aubert, 24 Nov 2003: |
| 896 | - add a return value for the fpga command |
| 897 | - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT |
| 898 | is defined. If ide_preinit fails, ide_init is aborted. |
| 899 | - fix an endianess problem in fat.h |
| 900 | |
wdenk | 3bbc899 | 2003-12-07 22:27:15 +0000 | [diff] [blame] | 901 | * Patch by Wolter Kamphuis, 05 Dec 2003: |
| 902 | Add support for SNMC's QS850/QS823/QS860T boards |
| 903 | |
wdenk | b028f71 | 2003-12-07 21:39:28 +0000 | [diff] [blame] | 904 | * Patch by Yuli Barcohen, 3 Dec 2003: |
| 905 | "revive" U-Boot support for old Motorola MPC860ADS board |
| 906 | |
| 907 | * Patch by Cam(ilo?), 03 Dec 2003: |
| 908 | make examples build even with broken Montavista objcopy |
| 909 | |
| 910 | * Patch by Pavel Bartusek, 27 Nov 2003: |
| 911 | fix conversion problem with "bootretry" evironment variable |
| 912 | |
wdenk | b4676a2 | 2003-12-07 19:24:00 +0000 | [diff] [blame] | 913 | * Patch by Andre Schwarz, 24 Nov 2003: |
| 914 | add support for mvblue (mvBlueLYNX and mvBlueBOX) boards |
| 915 | |
| 916 | * Patch by Pavel Bartusek, 21 Nov 2003: |
| 917 | set ZMII bridge speed on 440 |
| 918 | |
| 919 | * Patch by Anders Larsen, 17 Nov 2003: |
| 920 | Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h |
| 921 | |
wdenk | a2663ea | 2003-12-07 18:32:37 +0000 | [diff] [blame] | 922 | * Patches by David Müller, 14 Nov 2003: |
| 923 | - board/mpl/common/common_util.c |
| 924 | * implement support for BZIP2 compressed images |
| 925 | * various cleanups (printf -> puts, ...) |
| 926 | - board/mpl/common/flash.c |
| 927 | * report correct errors to upper layers |
| 928 | * check the erase fail and VPP low bits in status reg |
| 929 | - board/mpl/vcma9/cmd_vcma9.c |
| 930 | - board/mpl/vcma9/flash.c |
| 931 | * various cleanups (printf -> puts, ...) |
| 932 | - common/cmd_usb.c |
| 933 | * fix typo in comment |
| 934 | - cpu/arm920t/usb_ohci.c |
| 935 | * support for S3C2410 is missing in #if line |
| 936 | - drivers/cs8900.c |
| 937 | * reinit some registers in case of error (cable missing, ...) |
| 938 | - fs/fat/fat.c |
| 939 | * support for USB/MMC devices is missing in #if line |
| 940 | - include/configs/MIP405.h |
| 941 | - include/configs/PIP405.h |
| 942 | * enable BZIP2 support |
| 943 | * enlarge malloc space to 1MiB because of BZIP2 support |
| 944 | - include/configs/VCMA9.h |
| 945 | * enable BZIP2 support |
| 946 | * enlarge malloc space to 1MiB because of BZIP2 support |
| 947 | * enable USB support |
| 948 | - lib_arm/armlinux.c |
| 949 | * change calling convention of ARM Linux kernel as |
| 950 | described on http://www.arm.linux.org.uk/developer/booting.php |
| 951 | |
| 952 | * Patch by Thomas Lange, 14 Nov 2003: |
| 953 | Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to |
| 954 | support all these AMD boards. |
| 955 | |
| 956 | * Patch by Thomas Lange, 14 Nov 2003: |
| 957 | Workaround for mips au1x00 physical memory accesses (the au1x00 |
| 958 | uses a 36 bit bus internally and cannot access physical memory |
| 959 | directly. Use the uncached SDRAM address instead of the physical |
| 960 | one.) |
| 961 | |
wdenk | ef5a967 | 2003-12-07 00:46:27 +0000 | [diff] [blame] | 962 | * Patch by Xue Ligong (Joe), 13 Nov 2003: |
| 963 | add Realtek 8019 ethernet driver |
| 964 | |
| 965 | * Patch by Yuli Barcohen, 13 Nov 2003: |
| 966 | MPC826xADS/PQ2FADS cleanup |
| 967 | |
| 968 | * Patch by Anders Larsen, 12 Nov 2003: |
| 969 | Update README to mark the PORTIO commands non-standard |
| 970 | |
wdenk | 5779d8d | 2003-12-06 23:55:10 +0000 | [diff] [blame] | 971 | * Patch by Nicolas Lacressonnière, 12 Nov 2003: |
| 972 | update for for Atmel AT91RM9200DK development kit: |
| 973 | - support for environment variables in DataFlash |
| 974 | - Atmel DataFlash AT45DB1282 support |
| 975 | |
| 976 | * Patch by Jeff Carr, 11 Nov 2003: |
| 977 | add support for new version of 8270 processors |
| 978 | |
| 979 | * Patches by George G. Davis, 05 Nov 2003: |
| 980 | - only pass the ARM linux initrd tag to the kernel when an initrd |
| 981 | is actually present |
| 982 | - update omap1510inn configuration file |
| 983 | |
wdenk | 8bf3b00 | 2003-12-06 23:20:41 +0000 | [diff] [blame] | 984 | * Patches by Stephan Linz, 3 Nov 2003: |
| 985 | - more endianess fixes for LAN91C111 driver |
| 986 | - CFG_HZ configuration patch for NIOS Cyclone board |
| 987 | |
| 988 | * Patch by Stephan Linz, 28 Oct 2003: |
| 989 | fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c |
| 990 | |
| 991 | * Patch by Steven Scholz, 20 Oct 2003: |
| 992 | - make "mii info <addr>" show infor for PHY at "addr" only |
| 993 | - Endian fix for miiphy_info() |
| 994 | |
wdenk | a8c7c70 | 2003-12-06 19:49:23 +0000 | [diff] [blame] | 995 | * Patch by Gleb Natapov, 19 Sep 2003: |
| 996 | Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c |
| 997 | |
| 998 | * Patch by Anders Larsen, 17 Sep 2003: |
| 999 | Bring ARM memory layout in sync with the documentation: |
| 1000 | stack and malloc-heap are now located _below_ the U-Boot code |
| 1001 | |
wdenk | fa1399e | 2003-12-06 11:20:01 +0000 | [diff] [blame] | 1002 | * Accelerate booting on TRAB board: read and check autoupdate image |
| 1003 | headers first instead of always reading the whole images. |
| 1004 | |
wdenk | b96619a | 2003-12-05 21:08:38 +0000 | [diff] [blame] | 1005 | * Fix type in MPC5XXX code (pointed out by Victor Wren) |
| 1006 | |
wdenk | af6d1df | 2003-12-03 23:53:42 +0000 | [diff] [blame] | 1007 | * Enabled password check on RMU board |
| 1008 | |
| 1009 | * Fix configuration problem with IceCube in LOWBOOT configuration: |
| 1010 | envrionment got embedded, corrupting the image layout. |
| 1011 | |
| 1012 | * Fix NEC display names (it's 6440 [for 640x480], not 6640). |
| 1013 | |
wdenk | fd3103b | 2003-11-25 16:55:19 +0000 | [diff] [blame] | 1014 | * Added BMS2003 board |
| 1015 | add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display |
| 1016 | |
wdenk | b4757ce | 2003-11-17 21:45:27 +0000 | [diff] [blame] | 1017 | * Fix flash driver for TRAB board (must use Unlock Bypass Reset |
| 1018 | command to exit Unlock Bypass Mode); adjust timings for flash, SRAM |
| 1019 | and CPLD |
| 1020 | |
wdenk | 5bb226e | 2003-11-17 21:14:37 +0000 | [diff] [blame] | 1021 | * Use "-fPIC" instead of "-mrelocatable" to prevent problems with |
| 1022 | recent tools |
| 1023 | |
| 1024 | * Add checksum verification to 'imls' command |
| 1025 | |
| 1026 | * Add bd_info fields needed for 4xx Linux I2C driver |
| 1027 | |
| 1028 | * Patch by Martin Krause, 4 Nov. 2003: |
| 1029 | Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap) |
| 1030 | |
| 1031 | * Print used network interface when CONFIG_NET_MULTI is set |
| 1032 | |
wdenk | 5cf9da4 | 2003-11-07 13:42:26 +0000 | [diff] [blame] | 1033 | * Patch by Bernhard Kuhn, 28 Oct 2003: |
| 1034 | Add low boot support for MPC5200 |
| 1035 | |
| 1036 | * Fix problem with dual PCMCIA support (NSCU) |
| 1037 | |
| 1038 | * Fix MPC5200 I2C initialization function |
| 1039 | |
| 1040 | ====================================================================== |
wdenk | a43278a | 2003-09-11 19:48:06 +0000 | [diff] [blame] | 1041 | Changes for U-Boot 1.0.0: |
| 1042 | ====================================================================== |
| 1043 | |
wdenk | b13fb01 | 2003-10-30 21:49:38 +0000 | [diff] [blame] | 1044 | * Fix parameter passing to standalone images with bootm command |
| 1045 | |
| 1046 | * Patch by Kyle Harris, 30 Oct 2003: |
| 1047 | Fix build errors for ixdp425 board |
| 1048 | |
| 1049 | * Patch by David M. Horn, 29 Oct 2003: |
| 1050 | Fixes to build under CYGWIN |
| 1051 | |
| 1052 | * Get IceCube MGT5100 working (again) |
| 1053 | |
wdenk | 5fa66df | 2003-10-29 23:18:55 +0000 | [diff] [blame] | 1054 | * Fix problems in memory test on some boards (which was not |
| 1055 | non-destructive as intended) |
| 1056 | |
| 1057 | * Patch by Gary Jennejohn, 28 Oct 2003: |
| 1058 | Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack |
| 1059 | to prevent stack overflow on ARM systems |
| 1060 | |
wdenk | a0f2fe5 | 2003-10-28 09:14:21 +0000 | [diff] [blame] | 1061 | * Patch by Stephan Linz, 28 Oct 2003: |
| 1062 | fix init sequence error for NIOS port |
| 1063 | |
| 1064 | * Allow lowercase spelling for IceCube_5200; support MPC5200LITE name |
| 1065 | |
| 1066 | * Add CONFIG_VERSION_VARIABLE to TRAB configuration |
| 1067 | |
wdenk | a57a496 | 2003-10-26 22:52:58 +0000 | [diff] [blame] | 1068 | * Patch by Xiao Xianghua, 23 Oct 2003: |
| 1069 | small patch for mpc85xx |
| 1070 | |
| 1071 | * Fix small problem in MPC5200 I2C driver |
| 1072 | |
| 1073 | * Fix FCC3 support on ATC board |
| 1074 | |
dzu | 8cb8143 | 2003-10-24 13:14:45 +0000 | [diff] [blame] | 1075 | * Correct header printing for multi-image files in do_bootm() |
| 1076 | |
| 1077 | * Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED |
| 1078 | |
wdenk | 4654af2 | 2003-10-22 09:00:28 +0000 | [diff] [blame] | 1079 | * Fix PCI problems on PPChameleon board |
| 1080 | |
wdenk | a3ad8e2 | 2003-10-19 23:22:11 +0000 | [diff] [blame] | 1081 | * Patch by Steven Scholz, 18 Oct 2003: |
| 1082 | Fix AT91RM9200 ethernet driver |
| 1083 | |
| 1084 | * Patch by Nye Liu, 17 Oct 2003: |
| 1085 | Fix typo in include/mpc8xx.h |
| 1086 | |
| 1087 | * Patch by Richard Woodruff, 16 Oct 03: |
| 1088 | Fixes for cpu/arm925/interrupt.c |
| 1089 | - Initialize timestamp & lastdec vars. |
| 1090 | - fix timestamp overflows. |
| 1091 | - fix lastdec overflow. |
| 1092 | - smarter normalization to allow udelay() below 1ms to work. |
| 1093 | |
| 1094 | * Patch by Scott McNutt, 16 Oct |
| 1095 | add networking support for the Altera Nios Development Kit, |
| 1096 | Cyclone Edition (DK-1C20) |
| 1097 | |
| 1098 | * Patch by Jon Diekema, 14 Oct 2003: |
| 1099 | add hint about doc/README.silent to README file |
| 1100 | |
dzu | e7df029 | 2003-10-19 21:43:26 +0000 | [diff] [blame] | 1101 | * Add CompactFlash support for NSCU |
| 1102 | |
wdenk | d7281f4 | 2003-10-19 22:30:08 +0000 | [diff] [blame] | 1103 | * Fix PCI problems on PPChameleonEVB |
| 1104 | |
wdenk | 3d1e8a9 | 2003-10-16 12:53:35 +0000 | [diff] [blame] | 1105 | * TRAB auto-update: Base decision if we have to strip the image |
| 1106 | header on image type as encoded in the header |
wdenk | d7281f4 | 2003-10-19 22:30:08 +0000 | [diff] [blame] | 1107 | (include image type patch by Martin Krause, 17 Oct 2003) |
wdenk | 3d1e8a9 | 2003-10-16 12:53:35 +0000 | [diff] [blame] | 1108 | |
wdenk | 42d1f03 | 2003-10-15 23:53:47 +0000 | [diff] [blame] | 1109 | * Patches by Xianghua Xiao, 15 Oct 2003: |
| 1110 | |
| 1111 | - Added Motorola CPU 8540/8560 support (cpu/85xx) |
| 1112 | - Added Motorola MPC8540ADS board support (board/mpc8540ads) |
| 1113 | - Added Motorola MPC8560ADS board support (board/mpc8560ads) |
| 1114 | |
| 1115 | * Fix flash timings on TRAB board |
| 1116 | |
wdenk | 2d5b561 | 2003-10-14 19:43:55 +0000 | [diff] [blame] | 1117 | * Make sure HUSH is initialized for running auto-update scripts |
| 1118 | |
| 1119 | * Make 5200 reset command _really_ reset the board, without running |
| 1120 | any other code after it |
| 1121 | |
| 1122 | * Fix errors with flash erase when range spans across banks |
| 1123 | that are mapped in reverse order |
| 1124 | |
| 1125 | * Fix flash mapping and display on P3G4 board |
| 1126 | |
| 1127 | * Patch by Kyle Harris, 15 Jul 2003: |
| 1128 | - add support for Intel IXP425 CPU |
| 1129 | - add support for IXDP425 eval board |
| 1130 | |
wdenk | f72da34 | 2003-10-10 10:05:42 +0000 | [diff] [blame] | 1131 | * Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent |
| 1132 | for more information |
| 1133 | |
wdenk | 5da627a | 2003-10-09 20:09:04 +0000 | [diff] [blame] | 1134 | * Patch by Steven Scholz, 10 Oct 2003 |
| 1135 | - Add support for Altera FPGA ACEX1K |
| 1136 | |
wdenk | 15647dc | 2003-10-09 19:00:25 +0000 | [diff] [blame] | 1137 | * Patches by Thomas Lange, 09 Oct 2003: |
| 1138 | - fix cmd_ide.c for non ppc boards (read/write functions did not |
| 1139 | add ATA base address) |
| 1140 | - fix for shannon board |
| 1141 | - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code |
wdenk | 5da627a | 2003-10-09 20:09:04 +0000 | [diff] [blame] | 1142 | - Endian swap ATA identity for all big endian CPUs, not just PPC |
| 1143 | - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize |
| 1144 | args to linux |
| 1145 | - add support for dbau1x00 board (MIPS32) |
wdenk | 15647dc | 2003-10-09 19:00:25 +0000 | [diff] [blame] | 1146 | |
| 1147 | * Patch by Sangmoon Kim, 07 Oct 2003: |
| 1148 | add support for debris board |
| 1149 | |
wdenk | a0ff7f2 | 2003-10-09 13:16:55 +0000 | [diff] [blame] | 1150 | * Patch by Martin Krause, 09 Oct 2003: |
| 1151 | Fixes for TRAB board |
| 1152 | - /board/trab/rs485.c: correct baudrate |
wdenk | 42d1f03 | 2003-10-15 23:53:47 +0000 | [diff] [blame] | 1153 | - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in |
wdenk | a0ff7f2 | 2003-10-09 13:16:55 +0000 | [diff] [blame] | 1154 | udelay(); fix some timing problems with adc controller |
| 1155 | - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power; |
| 1156 | modify commands: touch and buzzer |
| 1157 | |
| 1158 | * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE |
| 1159 | (quick & dirty workaround for rogue pointer problem in get_vfatname()); |
| 1160 | Use direct function calls for auto_update instead of hush commands |
| 1161 | |
wdenk | 4a55170 | 2003-10-08 23:26:14 +0000 | [diff] [blame] | 1162 | * Patch by Scott McNutt, 04 Oct 2003: |
| 1163 | - add support for Altera Nios-32 CPU |
| 1164 | - add support for Nios Cyclone Development Kit (DK-1C20) |
| 1165 | |
| 1166 | * Patch by Steven Scholz, 29 Sep 2003: |
| 1167 | - A second parameter for bootm overwrites the load address for |
| 1168 | "Standalone Application" images. |
| 1169 | - bootm sets environment variable "filesize" to the resulting |
| 1170 | (uncompressed) data length for "Standalone Application" images |
| 1171 | when autostart is set to "no". Now you can do something like |
| 1172 | if bootm $fpgadata $some_free_ram ; then |
| 1173 | fpga load 0 $some_free_ram $filesize |
| 1174 | fi |
| 1175 | |
| 1176 | * Patch by Denis Peter, 25 Sept 2003: |
| 1177 | add support for the MIP405 Rev. C board |
| 1178 | |
wdenk | 54387ac | 2003-10-08 22:45:44 +0000 | [diff] [blame] | 1179 | * Patch by Yuli Barcohen, 25 Sep 2003: |
| 1180 | add support for Zephyr Engineering ZPC.1900 board |
| 1181 | |
| 1182 | * Patch by Anders Larsen, 23 Sep 2003: |
| 1183 | add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only |
| 1184 | implemented for the x86 architecture) |
| 1185 | |
wdenk | fc3e216 | 2003-10-08 22:33:00 +0000 | [diff] [blame] | 1186 | * Patch by Sangmoon Kim, 23 Sep 2003: |
| 1187 | fix pll_pci_to_mem_multiplier table for MPC8245 |
| 1188 | |
| 1189 | * Patch by Anders Larsen, 22 Sep 2003: |
| 1190 | enable timed autoboot on PXA |
| 1191 | |
| 1192 | * Patch by David Müller, 22 Sep 2003: |
wdenk | fc3e216 | 2003-10-08 22:33:00 +0000 | [diff] [blame] | 1193 | - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver |
| 1194 | returns correct libgcc file path |
| 1195 | - "latency" reduction of busy-loop waiting to improve "U-Boot" boot |
| 1196 | time on s3c24x0 systems |
| 1197 | |
| 1198 | * Patch by Jon Diekema, 19 Sep 2003: |
| 1199 | - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet |
| 1200 | link state to the fault LED. |
| 1201 | - In NetLoop, make the Fault LED reflect the link status. The link |
| 1202 | status gets updated on entry, and on timeouts. |
wdenk | 42d1f03 | 2003-10-15 23:53:47 +0000 | [diff] [blame] | 1203 | |
wdenk | ef1464c | 2003-10-08 22:14:02 +0000 | [diff] [blame] | 1204 | * Patch by Anders Larsen, 18 Sep 2003: |
| 1205 | allow mkimage to build and run on Cygwin-hosted systems |
| 1206 | |
| 1207 | * Patch by Frank Müller, 18 Sep 2003: |
| 1208 | use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in |
| 1209 | cpu/mpc8xx/fec.c |
| 1210 | |
| 1211 | * Patch by Pantelis Antoniou, 16 Sep 2003: |
| 1212 | add tool to compute fileds in the PLPRCR register for MPC86x |
| 1213 | |
wdenk | d9a405a | 2003-10-07 20:01:55 +0000 | [diff] [blame] | 1214 | * Use IH_TYPE_FILESYSTEM for TRAB "disk" images. |
| 1215 | |
wdenk | 147031a | 2003-10-07 10:33:38 +0000 | [diff] [blame] | 1216 | * Fix build problems under FreeBSD |
| 1217 | |
wdenk | 887b372 | 2003-10-06 22:00:45 +0000 | [diff] [blame] | 1218 | * Add generic filesystem image type |
| 1219 | |
wdenk | fbe4b5c | 2003-10-06 21:55:32 +0000 | [diff] [blame] | 1220 | * Make fatload set filesize environment variable |
| 1221 | |
| 1222 | * enable basic / medium / high-end configurations for PPChameleonEVB |
| 1223 | board; fix NAND code |
| 1224 | |
| 1225 | * enable TFTP client code to specify to the server the desired |
| 1226 | timeout value (see RFC-2349) |
| 1227 | |
dzu | bb65a31 | 2003-09-30 15:22:12 +0000 | [diff] [blame] | 1228 | * Improve SDRAM setup for TRAB board |
| 1229 | |
dzu | 88a1bfa | 2003-09-30 15:11:43 +0000 | [diff] [blame] | 1230 | * Suppress all output with splashscreen configured only if "splashimage" |
| 1231 | is set |
| 1232 | |
dzu | cad0737 | 2003-09-30 14:36:51 +0000 | [diff] [blame] | 1233 | * Fix problems with I2C support for mpc5200 |
| 1234 | |
dzu | 8a42eac | 2003-09-29 21:55:54 +0000 | [diff] [blame] | 1235 | * Adapt TRAB configuration and auto_update to new memory layout |
| 1236 | |
dzu | 91e940d | 2003-09-25 22:32:40 +0000 | [diff] [blame] | 1237 | * Add configuration for wtk board |
| 1238 | |
dzu | 29127b6 | 2003-09-25 22:30:12 +0000 | [diff] [blame] | 1239 | * Add support for the Sharp LQ065T9DR51U LCD display |
| 1240 | |
wdenk | 206c60c | 2003-09-18 10:02:25 +0000 | [diff] [blame] | 1241 | * Patch by Rune Torgersen, 17 Sep 2003: |
| 1242 | - Fixes for MPC8266 default config |
wdenk | 65bd0e2 | 2003-09-18 10:45:21 +0000 | [diff] [blame] | 1243 | - Allow eth_loopback_test() on 8260 to use a subset of the FCC's |
wdenk | 206c60c | 2003-09-18 10:02:25 +0000 | [diff] [blame] | 1244 | |
| 1245 | * Patches by Jon Diekema, 17 Sep 2003: |
| 1246 | - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and |
| 1247 | env_common.c) |
| 1248 | - sbc8260 tweaks |
| 1249 | - adjust "help" output |
| 1250 | |
wdenk | 5f535fe | 2003-09-18 09:21:33 +0000 | [diff] [blame] | 1251 | * Patches by Anders Larsen, 17 Sep 2003: |
| 1252 | - fix spelling errors |
| 1253 | - set GD_FLG_DEVINIT flag only after device function pointers |
| 1254 | are valid |
| 1255 | - Allow CFG_ALT_MEMTEST on systems where address zero isn't |
| 1256 | writeable |
| 1257 | - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs |
| 1258 | - trigger watchdog while waiting in serial driver |
| 1259 | |
wdenk | b0639ca | 2003-09-17 22:48:07 +0000 | [diff] [blame] | 1260 | * Add auto-update code for TRAB board using USB memory sticks, |
| 1261 | support new configuration with more memory |
wdenk | f54ebdf | 2003-09-17 15:10:32 +0000 | [diff] [blame] | 1262 | |
wdenk | ef709e9 | 2003-09-16 17:35:37 +0000 | [diff] [blame] | 1263 | * disable MPC5200 bus pipelining as workaround for bus contention |
| 1264 | |
wdenk | 4aeb251 | 2003-09-16 17:06:05 +0000 | [diff] [blame] | 1265 | * Modify XLB arbiter priorities on MPC5200 so all devices use same |
| 1266 | priority; configure critical interrupts to be handled like external |
| 1267 | interrupts |
| 1268 | |
wdenk | acf98e7 | 2003-09-16 11:39:10 +0000 | [diff] [blame] | 1269 | * Make IPB clock on MGT5100/MPC5200 configurable in board config file; |
| 1270 | go back to 66 MHz for stability |
| 1271 | |
wdenk | 78137c3 | 2003-09-15 18:00:00 +0000 | [diff] [blame] | 1272 | * Patches by Jon Diekema, 15 Sep 2003: |
| 1273 | - add description for missing CFG_CMD_* entries in the README file |
| 1274 | - sacsng tweaks |
| 1275 | |
wdenk | 35656de | 2003-09-14 19:08:39 +0000 | [diff] [blame] | 1276 | * Patch by Gleb Natapov, 14 Sep 2003: |
| 1277 | enable watchdog support for all MPC824x boards that have a watchdog |
| 1278 | |
| 1279 | * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the |
| 1280 | "Non-octet Aligned Frame" errors we see at 100 Mbps |
| 1281 | |
| 1282 | * Patch by Sharad Gupta, 14 Sep 2003: |
| 1283 | fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL]) |
| 1284 | |
wdenk | 200f8c7 | 2003-09-13 19:13:29 +0000 | [diff] [blame] | 1285 | * Patch by llandre, 11 Sep 2003: |
| 1286 | update configuration for PPChameleonEVB board |
| 1287 | |
wdenk | 531716e | 2003-09-13 19:01:12 +0000 | [diff] [blame] | 1288 | * Patch by David Müller, 13 Sep 2003: |
| 1289 | various changes to VCMA9 board specific files |
| 1290 | |
| 1291 | * Add I2C support for MGT5100 / MPC5200 |
| 1292 | |
wdenk | b70e7a0 | 2003-09-12 20:09:09 +0000 | [diff] [blame] | 1293 | * Patch by Rune Torgersen, 11 Sep 2003: |
| 1294 | Changed default memory option on MPC8266ADS to NOT be Page Based |
| 1295 | Interleave, since this doesn't work very well with the standard |
| 1296 | 16MB DIMM |
| 1297 | |
| 1298 | * Patch by George G. Davis, 12 Sep 2003: |
| 1299 | fix Makefile settings for sk98 driver |
| 1300 | |
stroese | 68ce895 | 2003-09-12 08:57:52 +0000 | [diff] [blame] | 1301 | * Patch by Stefan Roese, 12 Sep 2003: |
| 1302 | - new boards added: DP405, HUB405, PLU405, VOH405 |
| 1303 | - some esd boards updated |
| 1304 | - cpu/ppc4xx/sdram.c: disable memory controller before setting |
| 1305 | first values |
| 1306 | - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems |
| 1307 | |
wdenk | 4f7cb08 | 2003-09-11 23:06:34 +0000 | [diff] [blame] | 1308 | * Patch by Martin Krause, 11 Sep 2003: |
| 1309 | add burn-in tests for TRAB board |
| 1310 | |
| 1311 | * Enable instruction cache on MPC5200 board |
| 1312 | |
wdenk | a43278a | 2003-09-11 19:48:06 +0000 | [diff] [blame] | 1313 | * Patch by Denis Peter, 11 Sep 2003: |
| 1314 | - fix USB data pointer assignment for bulk only transfer. |
| 1315 | - prevent to display erased directories in FAT filesystem. |
| 1316 | |
| 1317 | * Change output format for NAND flash - make it look like for other |
| 1318 | memory, too |
| 1319 | |
| 1320 | ====================================================================== |
wdenk | 149dded | 2003-09-10 18:20:28 +0000 | [diff] [blame] | 1321 | Changes for U-Boot 0.4.8: |
wdenk | d94f92c | 2003-08-28 09:41:22 +0000 | [diff] [blame] | 1322 | ====================================================================== |
| 1323 | |
dzu | 29127b6 | 2003-09-25 22:30:12 +0000 | [diff] [blame] | 1324 | * Add I2C and RTC support for RMU board |
| 1325 | |
wdenk | 7205e40 | 2003-09-10 22:30:53 +0000 | [diff] [blame] | 1326 | * Patches by Denis Peter, 9 Sep 2003: |
| 1327 | add FAT support for IDE, SCSI and USB |
| 1328 | |
| 1329 | * Patches by Gleb Natapov, 2 Sep 2003: |
| 1330 | - cleanup of POST code for unsupported architectures |
| 1331 | - MPC824x locks way0 of data cache for use as initial RAM; |
| 1332 | this patch unlocks it after relocation to RAM and invalidates |
| 1333 | the locked entries. |
| 1334 | |
| 1335 | * Patch by Gleb Natapov, 30 Aug 2003: |
| 1336 | new I2C driver for mpc107 bridge. Now works from flash. |
| 1337 | |
| 1338 | * Patch by Dave Ellis, 11 Aug 2003: |
| 1339 | - JFFS2: fix typo in common/cmd_jffs2.c |
| 1340 | - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option |
| 1341 | - JFFS2: remove node version 0 warning |
| 1342 | - JFFS2: accept JFFS2 PADDING nodes |
| 1343 | - SXNI855T: add AM29LV800 support |
| 1344 | - SXNI855T: move environment from EEPROM to flash |
| 1345 | - SXNI855T: boot from JFFS2 in NOR or NAND flash |
| 1346 | |
| 1347 | * Patch by Bill Hargen, 11 Aug 2003: |
| 1348 | fixes for I2C on MPC8240 |
| 1349 | - fix i2c_write routine |
| 1350 | - fix iprobe command |
| 1351 | - eliminates use of global variables, plus dead code, cleanup. |
| 1352 | |
wdenk | 149dded | 2003-09-10 18:20:28 +0000 | [diff] [blame] | 1353 | * Add support for USB Mass Storage Devices (BBB) |
| 1354 | (tested with USB memory sticks only) |
| 1355 | |
| 1356 | * Avoid flicker on TRAB's VFD |
| 1357 | |
wdenk | 7152b1d | 2003-09-05 23:19:14 +0000 | [diff] [blame] | 1358 | * Add support for SK98xx driver |
| 1359 | |
| 1360 | * Add PCI support for SL8245 board |
| 1361 | |
| 1362 | * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB) |
| 1363 | or 1 x AM29LV652 (two LV065 in one chip = 16 MB); |
| 1364 | Run IPB at 133 Mhz; adjust the MII clock frequency accordingly |
| 1365 | |
| 1366 | * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) |
| 1367 | to allow for more accurate baudrate settings |
| 1368 | (error now 0.7% at 115 kbps, instead of 3.5% before) |
| 1369 | |
| 1370 | * Patch by Andreas Mohr, 4 Sep 2003: |
| 1371 | Fix a lot of spelling errors |
| 1372 | |
wdenk | 12f3424 | 2003-09-02 22:48:03 +0000 | [diff] [blame] | 1373 | * Add support for PPChameleon Eval Board |
| 1374 | |
| 1375 | * Add support for P3G4 board |
| 1376 | |
| 1377 | * Fix problem with MGT5100 FEC driver: add "early" MAC address |
| 1378 | initialization |
| 1379 | |
wdenk | 326428c | 2003-08-31 18:37:54 +0000 | [diff] [blame] | 1380 | * Patch by Yuli Barcohen, 7 Aug 2003: |
| 1381 | check BCSR to detect if the board is configured in PCI mode |
| 1382 | |
wdenk | 149dded | 2003-09-10 18:20:28 +0000 | [diff] [blame] | 1383 | ====================================================================== |
| 1384 | Changes for U-Boot 0.4.7: |
| 1385 | ====================================================================== |
| 1386 | |
wdenk | 0cb61d7 | 2003-08-30 00:05:50 +0000 | [diff] [blame] | 1387 | * Patch by Raghu Krishnaprasad, 7 Aug 2003: |
| 1388 | add support for Adder II MPC852T module |
| 1389 | |
wdenk | 6f21347 | 2003-08-29 22:00:43 +0000 | [diff] [blame] | 1390 | * Patch by George G. Davis, 19 Aug 2003: |
| 1391 | fix TI Innovator/OMAP1510 pin configs |
| 1392 | |
| 1393 | * Patches by Kshitij, 18 Aug 2003 |
| 1394 | - add support for arm926ejs cpu core |
| 1395 | - add support for TI OMAP 1610 Innovator Board |
| 1396 | |
wdenk | c29fdfc | 2003-08-29 20:57:53 +0000 | [diff] [blame] | 1397 | * Patch by Yuli Barcohen, 14 Aug 2003: |
| 1398 | add support for bzip2 uncompression |
| 1399 | |
| 1400 | * Add GCC library to examples/Makefile so GCC utility functions will |
| 1401 | be resolved, too |
| 1402 | |
wdenk | ca75add | 2003-08-29 10:05:53 +0000 | [diff] [blame] | 1403 | * Add I2C and RTC support for RMU board using software I2C driver |
| 1404 | (because of better response to iprobe command); fix problem with |
| 1405 | "reset" command |
| 1406 | |
stroese | 437ce07 | 2003-08-28 14:24:37 +0000 | [diff] [blame] | 1407 | * Patch by Matthias Fuchs, 28 Aug 2003: |
| 1408 | Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to |
| 1409 | CONFIG_BOOTP_MAKS (see README). |
| 1410 | |
wdenk | d94f92c | 2003-08-28 09:41:22 +0000 | [diff] [blame] | 1411 | * Fix ICU862 environment problem |
| 1412 | |
| 1413 | * Fix RAM size detection for RMU board |
| 1414 | |
| 1415 | * Implement "reset" for MGT5100/MPC5200 systems |
| 1416 | |
| 1417 | ====================================================================== |
| 1418 | Changes for U-Boot 0.4.6: |
wdenk | 2535d60 | 2003-07-17 23:16:40 +0000 | [diff] [blame] | 1419 | ====================================================================== |
| 1420 | |
wdenk | e0ac62d | 2003-08-17 18:55:18 +0000 | [diff] [blame] | 1421 | * Make Ethernet autonegotiation on INCA-IP work for all clock rates; |
| 1422 | allow selection of clock frequency as "make" target |
| 1423 | |
| 1424 | * Implement memory autosizing code for IceCube boards |
| 1425 | |
| 1426 | * Configure network port on INCA-IP for autonegotiation |
| 1427 | |
| 1428 | * Fix overflow problem in network timeout code |
| 1429 | |
| 1430 | * Patch by Richard Woodruff, 8 Aug 2003: |
| 1431 | Allow crc32 to be used at address 0x000 (crc32_no_comp, too). |
| 1432 | |
wdenk | d94f92c | 2003-08-28 09:41:22 +0000 | [diff] [blame] | 1433 | ====================================================================== |
| 1434 | Changes for U-Boot 0.4.5: |
| 1435 | ====================================================================== |
| 1436 | |
wdenk | ae3af05 | 2003-08-07 22:18:11 +0000 | [diff] [blame] | 1437 | * Update for TQM board defaults: |
| 1438 | disable clocks_in_mhz, enable boot count limit |
| 1439 | |
dzu | 9374fa2 | 2003-08-07 15:04:48 +0000 | [diff] [blame] | 1440 | * Removed tools/gdb from "make all" target. Added make target "gdbtools" |
| 1441 | in toplevel directory instead. Removed astest.c from tools/gdb because |
| 1442 | it is no longer relevant. |
| 1443 | |
wdenk | 96e48cf | 2003-08-05 18:22:44 +0000 | [diff] [blame] | 1444 | * Fix PCI support for MPC5200 / IceCube Board |
| 1445 | |
wdenk | bdccc4f | 2003-08-05 17:43:17 +0000 | [diff] [blame] | 1446 | * Map ISP1362 USB OTG controller for NSCU board |
| 1447 | |
| 1448 | * Patch by Brad Parker, 02 Aug 2003: |
| 1449 | fix sc520_cdp problems |
| 1450 | |
| 1451 | * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements) |
| 1452 | |
| 1453 | * Allow erase command to cross flash bank boundaries |
| 1454 | |
wdenk | 1f4bb37 | 2003-07-27 00:21:01 +0000 | [diff] [blame] | 1455 | * Patch by Scott McNutt, 21 Jul 2003: |
| 1456 | Add support for LynuxWorks Kernel Downloadable Images (KDIs). |
| 1457 | Both LynxOS and BlueCat linux KDIs are supported. |
| 1458 | |
| 1459 | * Patch by Richard Woodruff, 25 Jul 2003: |
| 1460 | use more reliable reset for OMAP/925T |
| 1461 | |
| 1462 | * Patch by Nye Liu, 25 Jul 2003: |
| 1463 | fix typo in mpc8xx.h |
| 1464 | |
| 1465 | * Patch by Richard Woodruff, 24 Jul 2003: |
| 1466 | Fixes for cmd_nand.c: |
| 1467 | - Fixed null dereferece which could result in incorrect ECC values. |
| 1468 | - Added support for devices with no Ready/Busy signal hooked up. |
| 1469 | - Added OMAP1510 read/write protect handling. |
| 1470 | - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock |
| 1471 | for non-JFFS2. |
| 1472 | - Switched default ECC to be JFFS2. |
| 1473 | |
wdenk | 7784674 | 2003-07-26 08:08:08 +0000 | [diff] [blame] | 1474 | * Allow crc32 to be used at address 0x000 |
| 1475 | |
| 1476 | * Provide consistent interface to standalone applications to access |
| 1477 | the 'global_data' structure |
| 1478 | Provide a doc/README.standalone more useful to users/developers. |
| 1479 | |
| 1480 | * Make IceCube MGT5100 FEC driver work |
| 1481 | |
wdenk | 27b207f | 2003-07-24 23:38:38 +0000 | [diff] [blame] | 1482 | * Implement new mechanism to export U-Boot's functions to standalone |
| 1483 | applications: instead of using (PPC-specific) system calls we now |
| 1484 | use a jump table; please see doc/README.standalone for details |
| 1485 | |
| 1486 | * Patch by Dave Westwood, 24 Jul 2003: |
| 1487 | added support for Unity OS (a proprietary OS) |
| 1488 | |
| 1489 | * Patch by Detlev Zundel, 23 Jul 2003: |
| 1490 | add "imls" command to print flash table of contents |
| 1491 | |
| 1492 | * Fix cold boot detection for log buffer reset |
| 1493 | |
| 1494 | * Return error for invalid length specifiers with "cp.X" etc. |
| 1495 | |
| 1496 | * Fix startup problem on MIPS |
| 1497 | |
| 1498 | * Allow for CONFIG_SPLASH_SCREEN even when no explicit |
| 1499 | bitmap support is configured |
| 1500 | |
| 1501 | * Patch by Bill Hargen, 18 Jul 2003: |
| 1502 | - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c |
| 1503 | |
| 1504 | * Patch by Denis Peter, 18 Jul 2003: |
| 1505 | - fix memory configuration for MIP405T |
| 1506 | - fix printout of baudrate for "loadb <loadaddr> <baudrate>" |
| 1507 | |
| 1508 | * Cleanup of TQM82xx configurations; use "official" board types |
| 1509 | to make selection easier. |
| 1510 | |
wdenk | 2535d60 | 2003-07-17 23:16:40 +0000 | [diff] [blame] | 1511 | * Patch by Martin Krause, 17 Jul 2003: |
| 1512 | add delay to get I2C working with "imm" command and s3c24x0_i2c.c |
| 1513 | |
| 1514 | * Patch by Richard Woodruff, 17 July 03: |
stroese | 437ce07 | 2003-08-28 14:24:37 +0000 | [diff] [blame] | 1515 | - Fixed bug in OMAP1510 baud rate divisor settings. |
wdenk | 2535d60 | 2003-07-17 23:16:40 +0000 | [diff] [blame] | 1516 | |
| 1517 | * Patch by Nye Liu, 16 July 2003: |
| 1518 | MPC860FADS fixes: |
| 1519 | - add MPC86xADS support (uses MPC86xADS.h) |
| 1520 | - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) |
| 1521 | o PLPRCR changes |
| 1522 | o BRG changes (EXTAL/XTAL restricted to 10MHz) |
| 1523 | o don't trust gclk() software measurement by default, depend on |
| 1524 | CONFIG_8xx_GCLK_FREQ |
| 1525 | - add DRAM SIMM not installed detection |
| 1526 | - use more "correct" SDRAM initialization sequence |
| 1527 | - allow different SDRAM sizes (8xxADS has 8M) |
| 1528 | - default DER is 0 |
| 1529 | - remove unused MAMR defines from FADS860T.h (all done in fads.c) |
| 1530 | - rename MAMR/MBMR defines to be more consistent. Should eventually |
| 1531 | be merged into MxMR to better reflect the PowerQUICC datasheet. |
| 1532 | |
| 1533 | * Patch by Yuli Barcohen, 16 Jul 2003: |
| 1534 | support new Motorola PQ2FADS-ZU evaluation board which replaced |
| 1535 | MPC8260ADS and MPC8266ADS |
| 1536 | |
| 1537 | ====================================================================== |
wdenk | 945af8d | 2003-07-16 21:53:01 +0000 | [diff] [blame] | 1538 | Changes for U-Boot 0.4.4: |
| 1539 | ====================================================================== |
| 1540 | |
| 1541 | * Add support for IceCube board (with MGT5100 and MPC5200 CPUs) |
| 1542 | |
| 1543 | * Add support for MGT5100 and MPC5200 processors |
| 1544 | |
| 1545 | * Patch by Lutz Dennig, 15 Jul 2003: |
| 1546 | update for R360MPI board |
| 1547 | |
| 1548 | ====================================================================== |
wdenk | 8564acf | 2003-07-14 22:13:32 +0000 | [diff] [blame] | 1549 | Changes for U-Boot 0.4.3: |
wdenk | b37c7e5 | 2003-06-30 16:24:52 +0000 | [diff] [blame] | 1550 | ====================================================================== |
| 1551 | |
wdenk | 2e5983d | 2003-07-15 20:04:06 +0000 | [diff] [blame] | 1552 | * Patches by Kshitij, 04 Jul 2003 |
wdenk | 945af8d | 2003-07-16 21:53:01 +0000 | [diff] [blame] | 1553 | - added support for arm925t cpu core |
wdenk | 2e5983d | 2003-07-15 20:04:06 +0000 | [diff] [blame] | 1554 | - added support for TI OMAP 1510 Innovator Board |
| 1555 | |
wdenk | 6dff552 | 2003-07-15 07:45:49 +0000 | [diff] [blame] | 1556 | * Patches by Martin Krause, 14 Jul 2003: |
| 1557 | - add I2C support for s3c2400 systems (trab board) |
| 1558 | - (re-) add "ping" to command table |
| 1559 | |
| 1560 | * Fix handling of "slow" POST routines |
| 1561 | |
wdenk | 8564acf | 2003-07-14 22:13:32 +0000 | [diff] [blame] | 1562 | * Patches by Yuli Barcohen, 13 Jul 2003: |
| 1563 | - Correct flash and JFFS2 support for MPC8260ADS |
| 1564 | - fix PVR values and clock generation for PowerQUICC II family |
| 1565 | (8270/8275/8280) |
| 1566 | |
| 1567 | * Patch by Bernhard Kuhn, 08 Jul 2003: |
| 1568 | - add support for M68K targets |
| 1569 | |
| 1570 | * Patch by Ken Chou, 3 Jul: |
| 1571 | - Fix PCI config table for A3000 |
| 1572 | - Fix iobase for natsemi.c |
| 1573 | (PCI_BASE_ADDRESS_0 is the IO base register for DP83815) |
wdenk | 945af8d | 2003-07-16 21:53:01 +0000 | [diff] [blame] | 1574 | |
wdenk | 8564acf | 2003-07-14 22:13:32 +0000 | [diff] [blame] | 1575 | * Allow to enable "slow" POST routines by key press on power-on |
| 1576 | * Fix temperature dependend switching of LCD backlight on LWMON |
| 1577 | * Tweak output format for LWMON |
| 1578 | |
stroese | 5702923 | 2003-07-11 08:23:12 +0000 | [diff] [blame] | 1579 | * Patch by Stefan Roese, 11 Jul 2003: |
| 1580 | - Fix bug in CONFIG_VERSION_VARIABLE. |
| 1581 | - AR405 config updated. |
| 1582 | - OCRTC/ORSG: bsp command added. |
| 1583 | - ASH405 bsp update. |
| 1584 | |
wdenk | 8564acf | 2003-07-14 22:13:32 +0000 | [diff] [blame] | 1585 | ====================================================================== |
| 1586 | Changes for U-Boot 0.4.2: |
| 1587 | ====================================================================== |
| 1588 | |
wdenk | f12e568 | 2003-07-07 20:07:54 +0000 | [diff] [blame] | 1589 | * Add support for NSCU board |
| 1590 | |
| 1591 | * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules |
| 1592 | |
| 1593 | * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML |
| 1594 | mirror bit flash on TQM8xxM modules |
| 1595 | |
wdenk | 0d49839 | 2003-07-01 21:06:45 +0000 | [diff] [blame] | 1596 | * Patch by Kenneth Johansson, 30 Jun 2003: |
| 1597 | get rid of MK_CMD_ENTRY macro; update doc/README.command |
| 1598 | |
wdenk | b37c7e5 | 2003-06-30 16:24:52 +0000 | [diff] [blame] | 1599 | * Patch by Seb James, 30 Jun 2003: |
| 1600 | Improve documentation of I2C configuration in README |
| 1601 | |
| 1602 | * Fix problems with previous log buffer "fixes" |
| 1603 | |
| 1604 | * Fix minor help text issues |
| 1605 | |
| 1606 | * "log append" did not append a newline |
| 1607 | |
| 1608 | ====================================================================== |
wdenk | b0fce99 | 2003-06-29 21:03:46 +0000 | [diff] [blame] | 1609 | Changes for U-Boot 0.4.1: |
wdenk | 8bde7f7 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 1610 | ====================================================================== |
| 1611 | |
wdenk | b0fce99 | 2003-06-29 21:03:46 +0000 | [diff] [blame] | 1612 | * Fix some missing commands, cleanup header files |
| 1613 | (autoscript, bmp, bsp, fat, mmc, nand, portio, ...) |
| 1614 | |
wdenk | 9d2b18a | 2003-06-28 23:11:04 +0000 | [diff] [blame] | 1615 | * Rewrite command lookup and help command (fix problems with bubble |
| 1616 | sort when sorting command name list). Minor cleanup here and there. |
| 1617 | |
wdenk | d1cbe85 | 2003-06-28 17:24:46 +0000 | [diff] [blame] | 1618 | * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable: |
| 1619 | - Allow to call sysmon function interactively |
| 1620 | - PIC on LWMON board needs delay after power-on |
| 1621 | - Add missing RSR definitions for MPC8xx |
| 1622 | - Improve log buffer handling: guarantee clean reset after power-on |
wdenk | 149dded | 2003-09-10 18:20:28 +0000 | [diff] [blame] | 1623 | - Add support for EXBITGEN board (aka "genie") |
wdenk | d1cbe85 | 2003-06-28 17:24:46 +0000 | [diff] [blame] | 1624 | - Add support for SL8245 board |
| 1625 | |
wdenk | 8bde7f7 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 1626 | * Code cleanup: |
| 1627 | - remove trailing white space, trailing empty lines, C++ comments, etc. |
| 1628 | - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) |
| 1629 | |
| 1630 | * Patches by Kenneth Johansson, 25 Jun 2003: |
| 1631 | - major rework of command structure |
| 1632 | (work done mostly by Michal Cendrowski and Joakim Kristiansen) |
| 1633 | |
| 1634 | ====================================================================== |
| 1635 | Changes for U-Boot 0.4.0: |
wdenk | 4532cb6 | 2003-04-27 22:52:51 +0000 | [diff] [blame] | 1636 | ====================================================================== |
| 1637 | |
wdenk | 993cad9 | 2003-06-26 22:04:09 +0000 | [diff] [blame] | 1638 | * Patches by Robert Schwebel, 26 Jun 2003: |
wdenk | 8bde7f7 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 1639 | - csb226 configuration updated |
| 1640 | - credits for logodl port updated |
| 1641 | - innokom configuration updated |
| 1642 | - logodl tree update, still with coding style inconsistencies |
| 1643 | - added OCM for ppc405 warning to README |
wdenk | 993cad9 | 2003-06-26 22:04:09 +0000 | [diff] [blame] | 1644 | |
| 1645 | * Patch by Pantelis Antoniou, 25 Jun 2003: |
| 1646 | update NetVia with V2 board support |
| 1647 | |
wdenk | b783eda | 2003-06-25 22:26:29 +0000 | [diff] [blame] | 1648 | * Header file cleanup for ARM |
| 1649 | |
| 1650 | * Patch by Murray Jensen, 24 Jun 2003: |
| 1651 | - make sure to use only U-boot provided header files |
| 1652 | - fix problems with ".rodata.str1.4" section as used by GCC-3.x |
| 1653 | |
stroese | a300d83 | 2003-06-24 14:32:24 +0000 | [diff] [blame] | 1654 | * Patch by Stefan Roese, 24 Jun 2003: |
| 1655 | - Update esd ASH405 board files. |
| 1656 | - Update esd DASA_SIM config file. |
| 1657 | - Add ping command to some esd boards. |
| 1658 | |
wdenk | cceb871 | 2003-06-23 18:12:28 +0000 | [diff] [blame] | 1659 | * Patch by Yuli Barcohen, 23 Jun 2003: |
| 1660 | Update for MPC8260ADS board |
| 1661 | |
| 1662 | * Patch by Murray Jensen, 23 Jun 2003: |
| 1663 | - cleanup of GCC 3.x compiler warnings |
| 1664 | |
wdenk | 3595ac4 | 2003-06-22 17:18:28 +0000 | [diff] [blame] | 1665 | * Patch by Rune Torgersen, 4 Jun 2003: |
| 1666 | add large memory support for MPC8266ADS board |
stroese | a300d83 | 2003-06-24 14:32:24 +0000 | [diff] [blame] | 1667 | |
wdenk | 3595ac4 | 2003-06-22 17:18:28 +0000 | [diff] [blame] | 1668 | * Patch by Richard Woodruff, 19 June 03: |
| 1669 | - Enabled standard u-boot device abstraction for ARM |
| 1670 | - Enabled console device for ARM |
| 1671 | - Initilized bi_baudrate for ARM |
| 1672 | |
| 1673 | * Patch by Bill Hargen, 23 Apr 2003: |
| 1674 | fix byte order for 824x I2C addresses (write op) |
| 1675 | |
wdenk | 592c5ca | 2003-06-21 00:17:24 +0000 | [diff] [blame] | 1676 | * Patch by Murray Jensen, 20 Jun 2003: |
| 1677 | - hymod update |
| 1678 | - cleanup (especially for gcc-3.x compilers) |
| 1679 | |
wdenk | 72755c7 | 2003-06-20 23:10:58 +0000 | [diff] [blame] | 1680 | * Patch by Tom Guilliams, 20 Jun 2003: |
| 1681 | added CONFIG_750FX support for IBM 750FX processors |
| 1682 | |
wdenk | 0332990 | 2003-06-20 22:36:30 +0000 | [diff] [blame] | 1683 | * Patch by Devin Crumb, 02 Apr 2003: |
| 1684 | Fix clock divider rounding problem in drivers/serial.c |
| 1685 | |
| 1686 | * Patch by Richard Woodruff, 19 June 03: |
| 1687 | - Fixed smc91c111 driver to sync with the u-boot environment |
| 1688 | (driver/smc91c111.c). |
wdenk | 0b97ab1 | 2003-06-19 23:58:30 +0000 | [diff] [blame] | 1689 | - Added eth_init error return check in NetLoop (net/net.c). |
| 1690 | |
wdenk | 0332990 | 2003-06-20 22:36:30 +0000 | [diff] [blame] | 1691 | * Patch by Ken Chou, 19 June 2003: |
wdenk | 0b97ab1 | 2003-06-19 23:58:30 +0000 | [diff] [blame] | 1692 | Added support for A3000 SBC board (Artis Microsystems Inc.) |
| 1693 | |
wdenk | 6dd652f | 2003-06-19 23:40:20 +0000 | [diff] [blame] | 1694 | * Patches by Murray Jensen, 17 Jun 2003: |
| 1695 | - Hymod board database mods: add "who" field and new xilinx chip types |
| 1696 | - provide new "init_cmd_timeout()" function so code external to |
| 1697 | "common/main.c" can use the "reset_cmd_timeout()" function before |
| 1698 | entering the main loop |
| 1699 | - add DTT support for adm1021 (new file dtt/adm1021.c; config |
| 1700 | slightly different. see include/configs/hymod.h for an example |
| 1701 | (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and |
| 1702 | CFG_DTT_ADM1021 defined) |
| 1703 | - add new "eeprom_probe()" function which has similar args and |
| 1704 | behaves in a similar way to "eeprom_read()" etc. |
| 1705 | - add 8260 FCC ethernet loopback code (new "eth_loopback_test()" |
| 1706 | function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST) |
| 1707 | - gdbtools copyright update |
| 1708 | - ensure that set_msr() executes the "sync" and "isync" instructions |
| 1709 | after the "mtmsr" instruction in cpu/mpc8260/interrupts.c |
| 1710 | - 8260 I/O ports fix: Open Drain should be set last when configuring |
| 1711 | - add SIU IRQ defines for 8260 |
| 1712 | - allow LDSCRIPT override and OBJCFLAGS initialization: change to |
| 1713 | config.mk to allow board configurations to override the GNU |
| 1714 | linker script, selected via the LDSCRIPT, make variable, and to |
| 1715 | give an initial value to the OBJCFLAGS make variable |
| 1716 | - 8260 i2c enhancement: |
| 1717 | o correctly extends the timeout depending on the size of all |
| 1718 | queued messages for both transmit and receive |
| 1719 | o will not continue with receive if transmit times out |
| 1720 | o ensures that the error callback is done for all queued tx |
| 1721 | and rx messages |
| 1722 | o correctly detects both tx and rx timeouts, only delivers one to |
| 1723 | the callback, and does not overwrite an earlier error |
| 1724 | o logic in i2c_probe now correct |
| 1725 | - add "vprintf()" function so that "panic()" function can be |
| 1726 | technically correct |
| 1727 | - many Hymod board changes |
| 1728 | |
wdenk | 52f52c1 | 2003-06-19 23:04:19 +0000 | [diff] [blame] | 1729 | * Patches by Robert Schwebel, 14 Jun 2003: |
| 1730 | - add support for Logotronic DL datalogger board |
| 1731 | - cleanup serial line after kermit binary download |
| 1732 | - add debugX macro (debug level support) |
| 1733 | - update mach-types.h to latest arm.linux.org.uk master list. |
| 1734 | |
wdenk | 48b4261 | 2003-06-19 23:01:32 +0000 | [diff] [blame] | 1735 | * Patches by David Müller, 12 Jun 2003: |
| 1736 | - rewrite of the S3C24X0 register definitions stuff |
| 1737 | - "driver" for the built-in S3C24X0 RTC |
| 1738 | |
| 1739 | * Patches by Yuli Barcohen, 12 Jun 2003: |
| 1740 | - Add MII support and Ethernet PHY initialization for MPC8260ADS board |
| 1741 | - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset |
| 1742 | configuration word supplied by FPGA on some MPC8260ADS boards |
| 1743 | |
| 1744 | * Patch by Pantelis Antoniou, 10 Jun 2003: |
| 1745 | Unify status LED interface |
| 1746 | |
wdenk | 15ef8a5 | 2003-06-18 20:22:24 +0000 | [diff] [blame] | 1747 | * Add support for DS12887 RTC; add RTC support for ATC board |
| 1748 | |
wdenk | 2abbe07 | 2003-06-16 23:50:08 +0000 | [diff] [blame] | 1749 | * Patch by Nicolas Lacressonniere, 11 Jun 2003: |
| 1750 | Modifications for Atmel AT91RM9200DK ARM920T based development kit |
| 1751 | - Add Atmel DataFlash support for reading and writing. |
stroese | a300d83 | 2003-06-24 14:32:24 +0000 | [diff] [blame] | 1752 | - Add possibility to boot a Linux from DataFlash with BOOTM command. |
wdenk | 2abbe07 | 2003-06-16 23:50:08 +0000 | [diff] [blame] | 1753 | - Add Flash detection on Atmel AT91RM9200DK |
| 1754 | (between Atmel AT49BV1614 and AT49BV1614A flashes) |
| 1755 | - Replace old Ethernet PHY layer functions |
| 1756 | - Change link address |
| 1757 | |
| 1758 | * Patch by Frank Smith, 9 Jun 2003: |
| 1759 | use CRIT_EXCEPTION for machine check on 4xx |
| 1760 | |
| 1761 | * Patch by Detlev Zundel, 13 Jun 2003: |
| 1762 | added implementation of the "carinfo" command in cmd_immap.c |
| 1763 | |
wdenk | 71f9511 | 2003-06-15 22:40:42 +0000 | [diff] [blame] | 1764 | * Fix CONFIG_NET_MULTI support in include/net.h |
| 1765 | |
| 1766 | * Patches by Kyle Harris, 13 Mar 2003: |
| 1767 | - Add FAT partition support |
| 1768 | - Add command support for FAT |
| 1769 | - Add command support for MMC |
| 1770 | ---- |
| 1771 | - Add Intel PXA support for video |
| 1772 | - Add Intel PXA support for MMC |
| 1773 | ---- |
| 1774 | - Enable MMC and FAT for lubbock board |
| 1775 | - Other misc changes for lubbock board |
| 1776 | |
wdenk | 487778b | 2003-06-06 11:20:01 +0000 | [diff] [blame] | 1777 | * Patch by Robert Schwebel, April 02, 2003: |
| 1778 | fix for SMSC91111 driver |
| 1779 | |
wdenk | a3ed399 | 2003-06-05 19:37:36 +0000 | [diff] [blame] | 1780 | * Patch by Vladimir Gurevich, 04 Jun 2003: |
| 1781 | make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option |
| 1782 | |
stroese | 08eaea9 | 2003-06-05 15:44:37 +0000 | [diff] [blame] | 1783 | * Patch by Stefan Roese, 05 Jun 2003: |
| 1784 | - PPC4xx: Fix bug for initial stack in data cache as pointed out by |
| 1785 | Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in |
| 1786 | data cache can be used even if the chip select is in use. |
| 1787 | - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count |
| 1788 | (see README for further description). |
| 1789 | - Changed config files of CONFIG_EEPRO100 boards to use the |
| 1790 | CFG_RX_ETH_BUFFER define. |
| 1791 | |
wdenk | 73a8b27 | 2003-06-05 19:27:42 +0000 | [diff] [blame] | 1792 | * Add support for RMU board |
| 1793 | |
| 1794 | * Add support for TQM862L at 100/50 MHz |
| 1795 | |
| 1796 | * Patch by Pantelis Antoniou, 02 Jun 2003: |
| 1797 | major reconstruction of networking code; |
| 1798 | add "ping" support (outgoing only!) |
| 1799 | |
wdenk | f3e0de6 | 2003-06-04 15:05:30 +0000 | [diff] [blame] | 1800 | * Patch by Denis Peter, 04 June 2003: |
| 1801 | add support for the MIP405T board |
| 1802 | |
wdenk | 682011f | 2003-06-03 23:54:09 +0000 | [diff] [blame] | 1803 | * Patches by Udi Finkelstein, 2 June 2003: |
| 1804 | - Added support for custom keyboards, initialized by defining a |
| 1805 | board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD . |
| 1806 | - Added support for the RBC823 board. |
| 1807 | - cpu/mpc8xx/lcd.c now automatically calculates the |
| 1808 | Horizontal Pixel Count field. |
| 1809 | |
| 1810 | * Fix alignment problem in BOOTP (dhcp_leasetime option) |
| 1811 | [pointed out by Nicolas Lacressonnière, 2 Jun 2003] |
| 1812 | |
| 1813 | * Patch by Mark Rakes, 14 May 2003: |
| 1814 | add support for Intel e1000 gig cards. |
| 1815 | |
| 1816 | * Patch by Nye Liu, 3 Jun 2003: |
| 1817 | fix critical typo in MAMR definition (include/mpc8xx.h) |
| 1818 | |
| 1819 | * Fix requirement to align U-Boot image on 16 kB boundaries on PPC. |
| 1820 | |
| 1821 | * Patch by Klaus Heydeck, 2 Jun 2003 |
| 1822 | Minor changes for KUP4K configuration |
| 1823 | |
wdenk | 7a8e9bed | 2003-05-31 18:35:21 +0000 | [diff] [blame] | 1824 | * Patch by Marc Singer, 29 May 2003: |
| 1825 | Fixed rarp boot method for IA32 and other little-endian CPUs. |
| 1826 | |
| 1827 | * Patch by Marc Singer, 28 May 2003: |
| 1828 | Added port I/O commands. |
| 1829 | |
| 1830 | * Patch by Matthew McClintock, 28 May 2003 |
| 1831 | - cpu/mpc824x/start.S: fix relocation code when booting from RAM |
| 1832 | - minor patches for utx8245 |
| 1833 | |
| 1834 | * Patch by Daniel Engström, 28 May 2003: |
| 1835 | x86 update |
| 1836 | |
| 1837 | * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: |
| 1838 | add nand flash support to SXNI855T configuration |
| 1839 | fix/extend nand flash support: |
| 1840 | - fix 'nand erase' command so does not erase bad blocks |
| 1841 | - fix 'nand write' command so does not write to bad blocks |
| 1842 | - fix nand_probe() so handles no flash detected properly |
| 1843 | - add doc/README.nand |
| 1844 | - add .jffs2 and .oob options to nand read/write |
| 1845 | - add 'nand bad' command to list bad blocks |
| 1846 | - add 'clean' option to 'nand erase' to write JFFS2 clean markers |
| 1847 | - make NAND read/write faster |
| 1848 | |
| 1849 | * Patch by Rune Torgersen, 23 May 2003: |
| 1850 | Update for MPC8266ADS board |
| 1851 | |
wdenk | 3b57fe0 | 2003-05-30 12:48:29 +0000 | [diff] [blame] | 1852 | * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length |
| 1853 | instead CFG_MONITOR_LEN is now only used to determine _at_compile_ |
| 1854 | _time_ (!) if the environment is embedded within the U-Boot image, |
| 1855 | or in a separate flash sector. |
| 1856 | |
| 1857 | * Cleanup CFG_DER #defines in config files (wd maintained only) |
| 1858 | |
wdenk | f07771c | 2003-05-28 08:06:31 +0000 | [diff] [blame] | 1859 | * Fix data abort exception handling for arm920t CPU |
| 1860 | |
| 1861 | * Fix alignment problems with flash driver for TRAB board |
| 1862 | |
| 1863 | * Patch by Donald White, 21 May 2003: |
| 1864 | fix calculation of base address in pci_hose_config_device() |
| 1865 | |
| 1866 | * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always |
| 1867 | execute "cmd2", even if "cmd1" fails. Note that this is different |
| 1868 | to "run var1 var2" where the contents of "var2" will NOT be |
| 1869 | executed when a command in "var1" fails. |
| 1870 | |
wdenk | 38b9926 | 2003-05-23 23:18:21 +0000 | [diff] [blame] | 1871 | * Add zero-copy ramdisk support (requires corresponding kernel support!) |
| 1872 | |
wdenk | 4c3b21a | 2003-05-23 12:36:20 +0000 | [diff] [blame] | 1873 | * Patch by Kyle Harris, 20 May 2003: |
| 1874 | In preparation for an ixp port, rename cpu/xscale and arch-xscale |
| 1875 | into cpu/pxa and arch-pxa. |
| 1876 | |
stroese | d9ff6e8 | 2003-05-23 11:49:24 +0000 | [diff] [blame] | 1877 | * Patch by Stefan Roese, 23 May 2003: |
| 1878 | - IBM PPC405EP port added. |
| 1879 | - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not |
| 1880 | UART0) is used as default U-Boot console. PPC4xx only! |
| 1881 | - esd ASH405 board added (PPC405EP based). |
| 1882 | - BUBINGA405EP board added (PPC405EP based - IBM Eval Board). |
| 1883 | - esd CPCI405AB board added. |
| 1884 | - esd PMC405 board added. |
| 1885 | - Update of some esd boards. |
| 1886 | |
wdenk | 33149b8 | 2003-05-23 11:38:58 +0000 | [diff] [blame] | 1887 | * Patch by Denis Peter, 19 Mai 2003: |
| 1888 | add support for the MIP405-3 board |
| 1889 | |
wdenk | 5d232d0 | 2003-05-22 22:52:13 +0000 | [diff] [blame] | 1890 | * Patch by Dave Ellis, 22 May 2003: |
| 1891 | Fix problem with only partially cleared .bss segment |
| 1892 | |
| 1893 | * Patch by Rune Torgersen, 12 May 2003: |
| 1894 | get PCI to work on a MPC8266ADS board; incorporate change to |
| 1895 | cpu/mpc8260/pci.c to enable overrides of PCI memory parameters |
| 1896 | |
| 1897 | * Patch by Nye Liu, 1 May 2003: |
| 1898 | minor patches for the FADS8xx |
| 1899 | |
| 1900 | * Patch by Thomas Schäfer, 28 Apr 2003: |
| 1901 | Fix SPD handling for 256 ECC DIMM on Walnut |
| 1902 | |
wdenk | c8c3a8b | 2003-05-21 20:26:20 +0000 | [diff] [blame] | 1903 | * Add support for arbitrary bitmaps for TRAB's VFD command; |
| 1904 | allow to pass boot bitmap addresses in environment variables; |
| 1905 | allow for zero boot delay |
wdenk | 82226bf | 2003-05-20 20:49:01 +0000 | [diff] [blame] | 1906 | |
| 1907 | * Patch by Christian Geißinger, 19 May 2002: |
| 1908 | On TRAB: wait until the dummy byte has been completely sent |
| 1909 | |
wdenk | 7f70e85 | 2003-05-20 14:25:27 +0000 | [diff] [blame] | 1910 | * Patch by David Updegraff, 22 Apr 2003: |
| 1911 | update for CrayL1 board |
| 1912 | |
| 1913 | * Patch by Pantelis Antoniou, 21 Apr 2003: |
| 1914 | add boot support for ARTOS (a proprietary OS) |
| 1915 | |
| 1916 | * Patch by Steven Scholz, 11 Apr 2003: |
| 1917 | Add support for RTC DS1338 |
| 1918 | |
| 1919 | * Patch by Rod Boyce, 24 Jan 2003: |
| 1920 | Fix counting of extended partitions in diskboot command |
| 1921 | |
wdenk | 59de2ed | 2003-05-20 10:58:04 +0000 | [diff] [blame] | 1922 | * Patch by Christophe Lindheimer, 20 May 2003: |
| 1923 | allow the use of CFG_LOADS when CFG_NO_FLASH is set |
| 1924 | |
wdenk | 86d8276 | 2003-05-20 10:39:44 +0000 | [diff] [blame] | 1925 | * Fix SDRAM timing on Purple board |
| 1926 | |
wdenk | 66fd3d1 | 2003-05-18 11:30:09 +0000 | [diff] [blame] | 1927 | * Add support for CompactFlash on ATC board |
| 1928 | (includes support for Intel 82365 and compatible PC Card controllers, |
| 1929 | and Yenta-compatible PCI-to-CardBus controllers) |
| 1930 | |
wdenk | 45219c4 | 2003-05-12 21:50:16 +0000 | [diff] [blame] | 1931 | * Patch by Mathijs Haarman, 08 May 2003: |
| 1932 | Add lan91c96 driver (tested on Lubbock and custom PXA250 board only) |
| 1933 | |
wdenk | 9c62cc5 | 2003-05-03 23:33:47 +0000 | [diff] [blame] | 1934 | * Fix problem with usage of "true" (undefined in current versions of bfd.h) |
| 1935 | |
wdenk | 7aa7861 | 2003-05-03 15:50:43 +0000 | [diff] [blame] | 1936 | * Add support for Promess ATC board |
| 1937 | |
| 1938 | * Patch by Keith Outwater, 28 Apr 2003: |
| 1939 | - Miscellaneous corrections and additions to GEN860T board specific code. |
| 1940 | - Added GEN860_SC variant to GEN860T. |
| 1941 | - Miscellaneous corrections to GEN860T documentation. |
| 1942 | - Correct duplicate entry in U-Boot CREDITS file. |
| 1943 | - Add GEN860T_SC entry in MAINTAINERS file. |
| 1944 | - Update CREDITS file with GEN860T_SC info. |
| 1945 | |
| 1946 | * Update Smiths Aerospace addresses in MAINTAINERS file |
| 1947 | |
| 1948 | * Fix error handling in hush's version of "run" command |
| 1949 | |
wdenk | 4532cb6 | 2003-04-27 22:52:51 +0000 | [diff] [blame] | 1950 | * LWMON extensions: |
| 1951 | - Splashscreen support |
| 1952 | - modem support |
| 1953 | - sysmon support |
| 1954 | - temperature dependend enabling of LCD |
| 1955 | |
| 1956 | * Allow booting from old "PPCBoot" disk partitions |
| 1957 | |
| 1958 | * Add support for TQM8255 Board / MPC8255 CPU |
| 1959 | |
| 1960 | ====================================================================== |
wdenk | 02c9bed | 2003-04-20 17:41:25 +0000 | [diff] [blame] | 1961 | Changes for U-Boot 0.3.1: |
wdenk | d126bfb | 2003-04-10 11:18:18 +0000 | [diff] [blame] | 1962 | ====================================================================== |
| 1963 | |
wdenk | d791b1d | 2003-04-20 14:04:18 +0000 | [diff] [blame] | 1964 | * Make sure Block Lock Bits get cleared in R360MPI flash driver |
| 1965 | |
| 1966 | * MPC823 LCD driver: Fill color map backwards, to allow for steady |
| 1967 | display when Linux takes over |
| 1968 | |
| 1969 | * Patch by Erwin Rol, 27 Feb 2003: |
| 1970 | Add support for RTEMS (this time for real). |
| 1971 | |
| 1972 | * Add support for "bmp info" and "bmp display" commands to load |
| 1973 | bitmap images; this can be used (for example in a "preboot" |
| 1974 | command) to display a splash screen very quickly after poweron. |
| 1975 | |
| 1976 | * Add support for 133 MHz clock on INCA-IP board |
| 1977 | |
wdenk | 4a6fd34 | 2003-04-12 23:38:12 +0000 | [diff] [blame] | 1978 | * Patch by Lutz Dennig, 10 Apr 2003: |
| 1979 | Update for R360MPI board |
| 1980 | |
| 1981 | * Add new meaning to "autostart" environment variable: |
| 1982 | If set to "no", a standalone image passed to the |
| 1983 | "bootm" command will be copied to the load address |
| 1984 | (and eventually uncompressed), but NOT be started. |
| 1985 | This can be used to load and uncompress arbitrary |
| 1986 | data. |
| 1987 | |
stroese | 69f8f827 | 2003-04-10 13:30:28 +0000 | [diff] [blame] | 1988 | * Patch by Stefan Roese, 10 Apr 2003: |
wdenk | 4a6fd34 | 2003-04-12 23:38:12 +0000 | [diff] [blame] | 1989 | Changed DHCP client to use IP address from server option field #54 |
| 1990 | from the OFFER packet in the server option field #54 in the REQUEST |
| 1991 | packet. This fixes a problem using a Windows 2000 DHCP server, |
| 1992 | where the DHCP-server is not the TFTP-server. |
| 1993 | |
| 1994 | * Set max brightness for MN11236 displays on TRAB board |
stroese | 69f8f827 | 2003-04-10 13:30:28 +0000 | [diff] [blame] | 1995 | |
wdenk | d126bfb | 2003-04-10 11:18:18 +0000 | [diff] [blame] | 1996 | * Add support for TQM862L modules |
| 1997 | |
| 1998 | ====================================================================== |
wdenk | 60fbe25 | 2003-04-08 23:25:21 +0000 | [diff] [blame] | 1999 | Changes for U-Boot 0.3.0: |
wdenk | aacf9a4 | 2003-01-17 16:27:01 +0000 | [diff] [blame] | 2000 | ====================================================================== |
| 2001 | |
wdenk | 3e38691 | 2003-04-05 00:53:31 +0000 | [diff] [blame] | 2002 | * Patch by Arun Dharankar, 4 Apr 2003: |
| 2003 | Add IDMA example code (tested on 8260 only) |
| 2004 | |
| 2005 | * Add support for Purple Board (MIPS64 5Kc) |
| 2006 | |
| 2007 | * Add support for MIPS64 5Kc CPUs |
| 2008 | |
| 2009 | * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS |
| 2010 | |
| 2011 | * Patch by Denis Peter, 04 Apr 2003: |
| 2012 | - update MIP405-4 board |
| 2013 | |
stroese | 36c05a8 | 2003-04-04 16:55:30 +0000 | [diff] [blame] | 2014 | * Patch by Stefan Roese, 4 Apr 2003: |
| 2015 | - U-Boot version environment variable "ver" added |
| 2016 | (CONFIG_VERSION_VARIABLE). |
| 2017 | - Changed PPC405GPr version from A to B. |
| 2018 | - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1. |
| 2019 | |
wdenk | 3e38691 | 2003-04-05 00:53:31 +0000 | [diff] [blame] | 2020 | * Patches by Denis Peter, 03 April 2003: |
| 2021 | - fix PCI IRQs on MPL boards |
| 2022 | - fix two more un-relocated pointer problems |
| 2023 | |
| 2024 | * Fix behaviour of "run" command: |
| 2025 | - print error message iv variable does not exist |
| 2026 | - terminate processing of arguments in case of error |
| 2027 | |
| 2028 | * Patches by Peter Figuli, 10 Mar 2003 |
| 2029 | - Add support for BTUART on PXA platform |
| 2030 | - Add support for WEP EP250 (PXA) board |
| 2031 | |
| 2032 | * Fix flash problems on INCA-IP; add tool to allow bruning images to |
| 2033 | flash using a BDI2000 |
| 2034 | |
| 2035 | * Implement fix for I2C Edge Conditions problem for all boards that |
| 2036 | use the bit-banging driver (common/soft_i2c.c) |
| 2037 | |
wdenk | 0db5bca | 2003-03-31 17:27:09 +0000 | [diff] [blame] | 2038 | * Patch by Martin Winistoerfer, 23 Mar 2003 |
| 2039 | - Add port to MPC555/556 microcontrollers |
| 2040 | - Add support for cmi customer board with |
| 2041 | Intel 28F128J3A, 28F320J3A or 28F640J3A flash. |
| 2042 | |
| 2043 | * Patch by Rick Bronson, 28 Mar 2003: |
| 2044 | - fix common/cmd_nand.c |
| 2045 | |
wdenk | 85ec0bc | 2003-03-31 16:34:49 +0000 | [diff] [blame] | 2046 | * Patch by Arun Dharankar, 24 Mar 2003: |
| 2047 | - add threads / scheduler example code |
| 2048 | |
| 2049 | * Add patches by Robert Schwebel, 31 Mar 2003: |
| 2050 | - add ctrl-c support for kermit download |
| 2051 | - align bdinfo output on ARM |
wdenk | 3e38691 | 2003-04-05 00:53:31 +0000 | [diff] [blame] | 2052 | - csb226 board: bring in sync with innokom/memsetup.S |
| 2053 | - csb226 board: fix MDREFR handling |
| 2054 | - misc doc fixes / extensions |
| 2055 | - innokom board: cleanup, MDREFR fix in memsetup.S, config update |
| 2056 | - add BOOT_PROGRESS to armlinux.c |
wdenk | 85ec0bc | 2003-03-31 16:34:49 +0000 | [diff] [blame] | 2057 | |
stroese | 36c05a8 | 2003-04-04 16:55:30 +0000 | [diff] [blame] | 2058 | * Add CPU ID, version, and clock speed for INCA-IP |
wdenk | 85ec0bc | 2003-03-31 16:34:49 +0000 | [diff] [blame] | 2059 | |
wdenk | 506f044 | 2003-03-28 14:40:36 +0000 | [diff] [blame] | 2060 | * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board: |
| 2061 | - fix SRAM and SDRAM memory sizing |
| 2062 | - add status LED support |
| 2063 | - add MAC address for second (SCC1) ethernet port |
| 2064 | |
| 2065 | * Update default environment for TQM8260 board |
| 2066 | |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 2067 | * Patch by Rick Bronson, 16 Mar 2003: |
wdenk | c021880 | 2003-03-27 12:09:35 +0000 | [diff] [blame] | 2068 | - Add NAND flash support for reading, writing, and erasing NAND |
| 2069 | flash (certain forms of which are called SmartMedia). |
| 2070 | - Add support for Atmel AT91RM9200DK ARM920T based development kit. |
wdenk | dc7c9a1 | 2003-03-26 06:55:25 +0000 | [diff] [blame] | 2071 | |
| 2072 | * Patches by Robert Schwebel, 19 Mar 2003: |
| 2073 | - use arm-linux-gcc as default compiler for ARM |
| 2074 | - fix i2c fixup code |
| 2075 | - fix missing baudrate setting |
| 2076 | - added $loadaddr / CFG_LOAD_ADDR support to loadb |
| 2077 | - moved "ignoring trailing characters" _before_ u-boot wants to |
| 2078 | print out diagnostics messages; removes bogus characters at the |
| 2079 | end of transmission |
| 2080 | |
| 2081 | * Patch by John Zhan, 18 Mar 2003: |
| 2082 | Add support for SinoVee Microsystems SC8xx boards |
| 2083 | |
| 2084 | * Patch by Rolf Offermanns, 21 Mar 2003: |
| 2085 | ported the dnp1110 related changes from the current armboot cvs to |
| 2086 | current u-boot cvs. smc91111 does not work. problem marked in |
| 2087 | smc91111.c, grep for "FIXME". |
| 2088 | |
| 2089 | * Patch by Brian Auld, 25 Mar 2003: |
| 2090 | Add support for STM flash chips on ebony board |
| 2091 | |
wdenk | 4d75a50 | 2003-03-25 16:50:56 +0000 | [diff] [blame] | 2092 | * Add PCI support for MPC8250 Boards (PM825 module) |
| 2093 | |
stroese | 44e5c5c | 2003-03-25 14:44:48 +0000 | [diff] [blame] | 2094 | * Patch by Stefan Roese, 25 Mar 2003: |
| 2095 | - PCI405 update. |
| 2096 | |
stroese | 5d5d44e | 2003-03-20 15:32:59 +0000 | [diff] [blame] | 2097 | * Patch by Stefan Roese, 20 Mar 2003: |
| 2098 | - CPCI4052 update (support for revision 3). |
| 2099 | - Set edge conditioning circuitry on PPC405GPr for compatibility |
| 2100 | to existing PPC405GP designs. |
| 2101 | - Clip udiv to 5 bits on PPC405 (serial.c). |
| 2102 | |
wdenk | c021880 | 2003-03-27 12:09:35 +0000 | [diff] [blame] | 2103 | * Extend INCAIP board support: |
| 2104 | - add automatic RAM size detection |
| 2105 | - add "bdinfo" command |
| 2106 | - pass flash address and size to Linux kernel |
| 2107 | - switch to 150 MHz clock |
| 2108 | |
wdenk | 06d01db | 2003-03-14 20:47:52 +0000 | [diff] [blame] | 2109 | * Avoid flicker on the TRAB's VFD by synchronizing the enable with |
| 2110 | the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100 |
| 2111 | boards, version 153 for Rev. 200 boards). |
| 2112 | |
| 2113 | * Patch by Vladimir Gurevich, 12 Mar 2003: |
| 2114 | Fix relocation problem of statically initialized string pointers |
| 2115 | in common/cmd_pci.c |
| 2116 | |
| 2117 | * Patch by Kai-Uwe Blöm, 12 Mar 2003: |
| 2118 | Cleanup & bug fixes for JFFS2 code: |
| 2119 | - the memory mangement was broken. It caused havoc on malloc by |
| 2120 | writing beyond the block boundaries. |
| 2121 | - the length calculation for files was wrong, sometimes resulting |
| 2122 | in short file reads. |
| 2123 | - data copying now optionally takes fragment version numbers into |
| 2124 | account, to avoid copying from older data. |
| 2125 | See doc/README.JFFS2 for details. |
| 2126 | |
wdenk | 3bac351 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 2127 | * Patch by Josef Wagner, 12 Mar 2003: |
| 2128 | - 16/32 MB and 50/80 MHz support with auto-detection for IP860 |
| 2129 | - ETH05 and BEDBUG support for CU824 |
| 2130 | - added support for MicroSys CPC45 |
| 2131 | - new BOOTROM/FLASH0 and DOC base for PM826 |
| 2132 | |
| 2133 | * Patch by Robert Schwebel, 12 Mar 2003: |
| 2134 | Fix the chpart command on innokom board |
| 2135 | |
| 2136 | * Name cleanup: |
| 2137 | mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h |
| 2138 | s/PPCBoot/U-Boot/ in some files |
| 2139 | s/pImage/uImage/ in some files |
| 2140 | |
| 2141 | * Patch by Detlev Zundel, 15 Jan 2003: |
| 2142 | Fix '' command line quoting |
| 2143 | |
| 2144 | * Patch by The LEOX team, 19 Jan 2003: |
| 2145 | - add support for the ELPT860 board |
| 2146 | - add support for Dallas ds164x RTC |
| 2147 | |
wdenk | 1cb8e98 | 2003-03-06 21:55:29 +0000 | [diff] [blame] | 2148 | * Patches by David Müller, 31 Jan 2003: |
| 2149 | - minimal setup for CardBus bridges |
| 2150 | - add EEPROM read/write support in the CS8900 driver |
| 2151 | - add support for the builtin I2C controller in the Samsung s3c24x0 chips |
wdenk | 3bac351 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 2152 | - add support for MPL's VCMA9 (Samsung s3c2410 based) board |
wdenk | 1cb8e98 | 2003-03-06 21:55:29 +0000 | [diff] [blame] | 2153 | |
| 2154 | * Patch by Steven Scholz, 04 Feb 2003: |
| 2155 | add support for RTC DS1307 |
| 2156 | |
| 2157 | * Patch by Reinhard Meyer, 5 Feb 2003: |
| 2158 | fix PLPRCR/SCCR init sequence on 8xx to allow for |
| 2159 | changes of EBDF by software |
| 2160 | |
| 2161 | * Patch by Vladimir Gurevich, 07 Feb 2003: |
| 2162 | "API-compatibility patch" for 4xx I2C driver |
| 2163 | |
| 2164 | * TRAB fixes / extensions: |
| 2165 | - Restore VFD brightness as saved in environment |
wdenk | 15ef8a5 | 2003-06-18 20:22:24 +0000 | [diff] [blame] | 2166 | - add support for Fujitsu flashes |
wdenk | 1cb8e98 | 2003-03-06 21:55:29 +0000 | [diff] [blame] | 2167 | - make sure both buzzers are turned off (drive low level) |
| 2168 | |
wdenk | 47cd00f | 2003-03-06 13:39:27 +0000 | [diff] [blame] | 2169 | * Patches by Robert Schwebel, 06 Mar 2003: |
| 2170 | - fix bug in BOOTP code (must use NetCopyIP) |
| 2171 | - update of CSB226 port |
| 2172 | - clear BSS segment on XScale |
| 2173 | - added support for i2c_init_board() function |
| 2174 | - update to the Innokom plattform |
| 2175 | |
| 2176 | * Extend support for redundand environments for configurations where |
| 2177 | environment size < sector size |
| 2178 | |
wdenk | db2f721f | 2003-03-06 00:58:30 +0000 | [diff] [blame] | 2179 | * Patch by Rune Torgersen, 13 Feb 2003: |
| 2180 | Add support for Motorola MPC8266ADS board |
| 2181 | |
| 2182 | * Patch by Kyle Harris, 19 Feb 2003: |
| 2183 | patches for the Intel lubbock board: |
| 2184 | memsetup.S - general cleanup (based on Robert's csb226 code) |
| 2185 | flash.c - overhaul, actually works now |
| 2186 | lubbock.c - fix init funcs to return proper value |
| 2187 | |
| 2188 | * Patch by Kenneth Johansson, 26 Feb 2003: |
stroese | 5d5d44e | 2003-03-20 15:32:59 +0000 | [diff] [blame] | 2189 | - Fixed off by one in RFTA calculation. |
wdenk | db2f721f | 2003-03-06 00:58:30 +0000 | [diff] [blame] | 2190 | - No need to abort when LDF is lower than we can program it's only |
stroese | 5d5d44e | 2003-03-20 15:32:59 +0000 | [diff] [blame] | 2191 | minimum timing so clamp it to what we can do. |
wdenk | db2f721f | 2003-03-06 00:58:30 +0000 | [diff] [blame] | 2192 | - Takes function pointer to function for reading the spd_nvram. Usefull |
| 2193 | for faking data or hardcode a module without the nvram. |
| 2194 | - fix other user for above change |
| 2195 | - fix some comments. |
| 2196 | |
| 2197 | * Patches by Brian Waite, 26 Feb 2003: |
| 2198 | - fix port for evb64260 board |
| 2199 | - fix PCI for evb64260 board |
| 2200 | - fix PCI scan |
| 2201 | |
| 2202 | * Patch by Reinhard Meyer, 1 Mar 2003: |
| 2203 | Add support for EMK TOP860 Module |
| 2204 | |
| 2205 | * Patch by Yuli Barcohen, 02 Mar 2003: |
| 2206 | Add SPD EEPROM support for MPC8260ADS board |
| 2207 | |
wdenk | 43d9616 | 2003-03-06 00:02:04 +0000 | [diff] [blame] | 2208 | * Patch by Robert Schwebel, 21 Jan 2003: |
| 2209 | - Add support for Innokom board |
| 2210 | - Don't complain if "install" fails |
| 2211 | - README cleanup (remove duplicated lines) |
| 2212 | - Update PXA header files |
| 2213 | |
| 2214 | * Add documentation for existing POST code (doc/README.POST) |
| 2215 | |
| 2216 | * Patch by Laudney Ren, 15 Jan 2003: |
| 2217 | Fix handling of redundand environment in "tools/envcrc.c" |
| 2218 | |
| 2219 | * Patch by Detlev Zundel, 28 Feb 2003: |
| 2220 | Add bedbug support for 824x systems |
| 2221 | |
| 2222 | * Add support for 16 MB flash configuration of TRAB board |
| 2223 | |
| 2224 | * Patch by Erwin Rol, 27 Feb 2003: |
| 2225 | Add support for RTEMS |
| 2226 | |
| 2227 | * Add image information to README |
| 2228 | |
stroese | 2a9e02e | 2003-02-18 11:30:24 +0000 | [diff] [blame] | 2229 | * Patch by Stefan Roese, 18 Feb 2003: |
| 2230 | CPCIISER4 configuration updated. |
| 2231 | |
stroese | d7787c6 | 2003-02-17 16:06:06 +0000 | [diff] [blame] | 2232 | * Patch by Stefan Roese, 17 Feb 2003: |
| 2233 | Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port). |
| 2234 | |
stroese | ad10dd9 | 2003-02-14 11:21:23 +0000 | [diff] [blame] | 2235 | * Patch by Stefan Roese, 13 Feb 2003: |
| 2236 | Add "pcidelay" environment variable (in ms, enabled via |
| 2237 | CONFIG_PCI_BOOTDELAY). |
| 2238 | PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after |
| 2239 | RST# to respond to configuration cycles (33MHz -> 1s). |
| 2240 | |
wdenk | 43d9616 | 2003-03-06 00:02:04 +0000 | [diff] [blame] | 2241 | * Fix dual PCMCIA slot support (when running with just one |
| 2242 | slot populated) |
| 2243 | |
| 2244 | * Add VFD type detection to trab board |
| 2245 | |
| 2246 | * extend drivers/cs8900.c driver to synchronize ethaddr environment |
| 2247 | variable with value in the EEPROM |
| 2248 | |
stroese | ee1b3b5 | 2003-02-10 16:39:00 +0000 | [diff] [blame] | 2249 | * Patch by Stefan Roese, 10 Feb 2003: |
| 2250 | Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c) |
| 2251 | |
wdenk | c021880 | 2003-03-27 12:09:35 +0000 | [diff] [blame] | 2252 | * Add support for MIPS32 4Kc CPUs |
| 2253 | |
| 2254 | * Add support for INCA-IP Board |
| 2255 | |
wdenk | 43d9616 | 2003-03-06 00:02:04 +0000 | [diff] [blame] | 2256 | ====================================================================== |
| 2257 | Changes for U-Boot 0.2.2: |
| 2258 | ====================================================================== |
| 2259 | |
wdenk | aacf9a4 | 2003-01-17 16:27:01 +0000 | [diff] [blame] | 2260 | * Add dual ethernet support on PM826 |
| 2261 | |
| 2262 | * Add support for LXT971 PHY on PM826 |
| 2263 | |
| 2264 | * Patch by Tord Andersson, 16 Jan 2003: |
| 2265 | Fix flash sector count for TQM8xxL |
| 2266 | |
| 2267 | * Fix I2C EEPROM problem on ICU862 board (would only write the first |
| 2268 | 16 bytes out of each 32 byte block) |
| 2269 | |
| 2270 | ====================================================================== |
| 2271 | Changes for U-Boot 0.2.1: |
wdenk | 288b3d7 | 2002-12-20 23:42:25 +0000 | [diff] [blame] | 2272 | ====================================================================== |
| 2273 | |
wdenk | 608c914 | 2003-01-13 23:54:46 +0000 | [diff] [blame] | 2274 | * Add support for V37 board |
| 2275 | (patch by Jón Benediktsson, 11 Dec 2002) |
| 2276 | |
wdenk | d0fb80c | 2003-01-11 09:48:40 +0000 | [diff] [blame] | 2277 | * Update baudrate in bd_info when it gets changed |
| 2278 | |
| 2279 | * Add watchdog trigger points while waiting for serial port |
| 2280 | (so far only 8xx -- needed on LWMON with 100ms watchdog) |
| 2281 | |
| 2282 | * Improve command line tool to access the U-Boot's environment |
| 2283 | (figuration of the utility, using a config file) |
| 2284 | |
wdenk | a25f862 | 2003-01-02 23:57:29 +0000 | [diff] [blame] | 2285 | * Add single quote support for (old) command line parser |
| 2286 | |
wdenk | 288b3d7 | 2002-12-20 23:42:25 +0000 | [diff] [blame] | 2287 | * Switch LWMON board default config from FRAM to EEPROM; |
| 2288 | in POST, EEPROM shows up on 8 addresses |
| 2289 | |
| 2290 | ====================================================================== |
wdenk | 2f91a3d | 2002-12-17 18:07:30 +0000 | [diff] [blame] | 2291 | Changes for U-Boot 0.2.0: |
wdenk | 24ee89b | 2002-11-03 17:56:27 +0000 | [diff] [blame] | 2292 | ====================================================================== |
| 2293 | |
wdenk | 6aff311 | 2002-12-17 01:51:00 +0000 | [diff] [blame] | 2294 | * Use 1-byte-read instead of -write for iprobe() function |
| 2295 | Add i2c commands to PM826 config |
| 2296 | |
| 2297 | * extend I2C POST code: check for list on known addresses |
| 2298 | |
wdenk | 228f29a | 2002-12-08 09:53:23 +0000 | [diff] [blame] | 2299 | * Improve log buffer code; use "loglevel" to decide which messages |
| 2300 | to log on the console, too (like in Linux); get rid of "logstart" |
| 2301 | |
| 2302 | * Add command line tool to access the U-Boot's environment |
| 2303 | (board-specific for TRAB now, to be fixed later) |
| 2304 | |
wdenk | 7c7a23b | 2002-12-07 00:20:59 +0000 | [diff] [blame] | 2305 | * Patch by Hans-Joerg Frieden, 06 Dec 2002 |
| 2306 | Fix misc problems with AmigaOne support |
| 2307 | |
| 2308 | * Patch by Chris Hallinan, 3 Dec 2002: |
| 2309 | minor cleanup to the MPC8245 EPIC driver |
| 2310 | |
| 2311 | * Patch by Pierre Aubert , 28 Nov 2002 |
| 2312 | Add support for external (SIU) interrupts on MPC8xx |
| 2313 | |
| 2314 | * Patch by Pierre Aubert , 28 Nov 2002 |
| 2315 | Fix nested syscalls bug in standalone applications |
| 2316 | |
| 2317 | * Patch by David Müller, 27 Nov 2002: |
| 2318 | fix output of "pciinfo" command for CardBus bridge devices. |
| 2319 | |
| 2320 | * Fix bug in TQM8260 board detection - boards got stuck when board ID |
| 2321 | was not readable |
| 2322 | |
wdenk | 1f53a41 | 2002-12-04 23:39:58 +0000 | [diff] [blame] | 2323 | * Add LED indication for IDE activity on KUP4K board |
| 2324 | |
wdenk | a6c7ad2 | 2002-12-03 21:28:10 +0000 | [diff] [blame] | 2325 | * Fix startup problems with VFD display on TRAB |
| 2326 | |
| 2327 | * Patch by Pierre Aubert, 20 Nov 2002 |
| 2328 | Add driver for Epson SED13806 graphic controller. |
| 2329 | Add support for BMP logos in cfb_console driver. |
| 2330 | |
wdenk | ea909b7 | 2002-11-21 23:11:29 +0000 | [diff] [blame] | 2331 | * Added support for both PCMCIA slots (at the same time!) on MPC8xx |
| 2332 | |
| 2333 | * Patch by Rod Boyce, 21 Nov 2002: |
| 2334 | fix PCMCIA on MBX8xx board |
| 2335 | |
| 2336 | * Patch by Pierre Aubert , 21 Nov 2002 |
| 2337 | Add CFG_CPM_POST_WORD_ADDR to make the offset of the |
| 2338 | bootmode word in DPRAM configurable |
| 2339 | |
wdenk | b2184c3 | 2002-11-19 23:01:07 +0000 | [diff] [blame] | 2340 | * Patch by Daniel Engström, 18 Nov 2002: |
| 2341 | Fixes for x86 port (mostly strings issues) |
| 2342 | |
| 2343 | * Patch by Ken Chou, 18 Nov 2002: |
| 2344 | Fix for natsemi NIC cards (DP83815) |
| 2345 | |
| 2346 | * Patch by Pierre Aubert, 19 Nov 2002: |
| 2347 | fix a bug for the MII configuration, and some warnings |
| 2348 | |
wdenk | c7de829 | 2002-11-19 11:04:11 +0000 | [diff] [blame] | 2349 | * Patch by Thomas Frieden, 13 Nov 2002: |
| 2350 | Add code for AmigaOne board |
| 2351 | (preliminary merge to U-Boot, still WIP) |
| 2352 | |
| 2353 | * Patch by Jon Diekema, 12 Nov 2002: |
| 2354 | - Adding URL for IEEE OUI lookup |
| 2355 | - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED |
| 2356 | being defined. |
| 2357 | - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and |
| 2358 | root-on-nfs macros are designed to switch how the default boot |
| 2359 | method gets defined. |
| 2360 | |
wdenk | 2262cfe | 2002-11-18 00:14:45 +0000 | [diff] [blame] | 2361 | * Patch by Daniel Engström, 13 Nov 2002: |
| 2362 | Add support for i386 architecture and AMD SC520 board |
| 2363 | |
| 2364 | * Patch by Pierre Aubert, 12 Nov 2002: |
| 2365 | Add support for DOS filesystem and booting from DOS floppy disk |
| 2366 | |
wdenk | 1d0350e | 2002-11-11 21:14:20 +0000 | [diff] [blame] | 2367 | * Patch by Jim Sandoz, 07 Nov 2002: |
| 2368 | Increase number of network RX buffers (PKTBUFSRX in |
| 2369 | "include/net.h") for EEPRO100 based boards (especially SP8240) |
| 2370 | which showed "Receiver is not ready" errors when U-Boot was |
| 2371 | processing the receive buffers slower than the network controller |
| 2372 | was filling them. |
| 2373 | |
wdenk | eb9401e | 2002-11-11 02:11:37 +0000 | [diff] [blame] | 2374 | * Patch by Andreas Oberritter, 09 Nov 2002: |
| 2375 | Change behaviour of NetLoop(): return -1 for errors, filesize |
| 2376 | otherwise; return code 0 is valid an means no file loaded - in this |
| 2377 | case the environment still gets updated! |
| 2378 | |
| 2379 | * Patches by Jon Diekema, 9 Nov 2002: |
| 2380 | - improve ADC/DAC clocking on the SACSng board to align |
| 2381 | the failing edges of LRCLK and SCLK |
| 2382 | - sbc8260 configuration tweaks |
| 2383 | - add status LED support for 82xx systems |
| 2384 | - wire sspi/sspo commands into command handler; improved error |
| 2385 | handlering |
| 2386 | - add timestamp support and alternate memory test to the |
| 2387 | SACSng configuration |
| 2388 | |
| 2389 | * Patch by Vince Husovsky, 7 Nov 2002: |
wdenk | 7f6c2cb | 2002-11-10 22:06:23 +0000 | [diff] [blame] | 2390 | Add "-n" to linker options to get rid of "Not enough room for |
| 2391 | program headers" problem |
| 2392 | |
| 2393 | * Patch by David Müller, 05 Nov 2002 |
| 2394 | Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ |
| 2395 | so we can use an already existing name |
| 2396 | |
| 2397 | * Patch by Pierre Aubert, 05 Nov 2002 |
| 2398 | Hardware relatied improvments in FDC boot code |
| 2399 | |
| 2400 | * Patch by Holger Schurig, 5 Nov 2002: |
| 2401 | Make the PXA really change it's frequency |
| 2402 | |
| 2403 | * Patch by Pierre Aubert, 05 Nov 2002 |
| 2404 | Add support for slave serial Spartan 2 FPGAs |
| 2405 | |
| 2406 | * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet |
| 2407 | drivers |
| 2408 | |
wdenk | 56f94be | 2002-11-05 16:35:14 +0000 | [diff] [blame] | 2409 | * Add support for log buffer which can be passed to Linux kernel's |
| 2410 | syslog mechanism; used especially for POST results. |
| 2411 | |
| 2412 | * Patch by Klaus Heydeck, 31 Oct 2002: |
| 2413 | Add initial support for kup4k board |
| 2414 | |
wdenk | 384ae02 | 2002-11-05 00:17:55 +0000 | [diff] [blame] | 2415 | * Patch by Robert Schwebel, 04 Nov 2002: |
| 2416 | - use watchdog to reset PXA250 systems |
| 2417 | - added progress callbacks to (some of the) ARM code |
| 2418 | - update for Cogent CSB226 board |
| 2419 | |
| 2420 | * Add support for FPS860 board |
| 2421 | |
wdenk | e95b61c | 2002-11-04 16:02:40 +0000 | [diff] [blame] | 2422 | * Patch by Guillaume Alexandre,, 04 Nov 2002: |
| 2423 | Improve PCI access on 32-bits Compact PCI bus |
| 2424 | |
wdenk | 24ee89b | 2002-11-03 17:56:27 +0000 | [diff] [blame] | 2425 | * Fix mdelay() on TRAB - this was still the debugging version with |
| 2426 | seconds instead of ms. |
| 2427 | |
| 2428 | * Patch by Robert Schwebel, 1 Nov 2002: |
| 2429 | XScale related cleanup (affects all ARM boards) |
| 2430 | |
| 2431 | * Cleanup of names and README. |
wdenk | cc1c8a1 | 2002-11-02 22:58:18 +0000 | [diff] [blame] | 2432 | |
| 2433 | ====================================================================== |
wdenk | 24ee89b | 2002-11-03 17:56:27 +0000 | [diff] [blame] | 2434 | Notes for U-Boot 0.1.0: |
wdenk | cc1c8a1 | 2002-11-02 22:58:18 +0000 | [diff] [blame] | 2435 | ====================================================================== |
| 2436 | |
| 2437 | This is the initial version of "Das U-Boot", the Universal Boot Loader. |
| 2438 | |
| 2439 | It is based on version 2.0.0 (the "Halloween Release") of PPCBoot. |
| 2440 | For information about the history of the project please see the |
| 2441 | PPCBoot project page at http://sourceforge.net/projects/ppcboot |
| 2442 | |
| 2443 | ====================================================================== |