Jan Kiszka | d388f36 | 2020-06-23 13:15:08 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (c) Siemens AG, 2020 |
| 4 | * |
| 5 | * Authors: |
| 6 | * Jan Kiszka <jan.kiszka@siemens.com> |
| 7 | * |
| 8 | * Derived from linux/drivers/watchdog/rti_wdt.c |
| 9 | */ |
| 10 | |
| 11 | #include <common.h> |
| 12 | #include <clk.h> |
| 13 | #include <dm.h> |
Jan Kiszka | f3efb1d | 2021-09-18 08:17:55 +0200 | [diff] [blame] | 14 | #include <dm/device_compat.h> |
Jan Kiszka | d388f36 | 2020-06-23 13:15:08 +0200 | [diff] [blame] | 15 | #include <power-domain.h> |
| 16 | #include <wdt.h> |
| 17 | #include <asm/io.h> |
Jan Kiszka | f3efb1d | 2021-09-18 08:17:55 +0200 | [diff] [blame] | 18 | #include <remoteproc.h> |
Jan Kiszka | d388f36 | 2020-06-23 13:15:08 +0200 | [diff] [blame] | 19 | |
| 20 | /* Timer register set definition */ |
| 21 | #define RTIDWDCTRL 0x90 |
| 22 | #define RTIDWDPRLD 0x94 |
| 23 | #define RTIWDSTATUS 0x98 |
| 24 | #define RTIWDKEY 0x9c |
| 25 | #define RTIDWDCNTR 0xa0 |
| 26 | #define RTIWWDRXCTRL 0xa4 |
| 27 | #define RTIWWDSIZECTRL 0xa8 |
| 28 | |
| 29 | #define RTIWWDRX_NMI 0xa |
| 30 | |
| 31 | #define RTIWWDSIZE_50P 0x50 |
| 32 | |
| 33 | #define WDENABLE_KEY 0xa98559da |
| 34 | |
| 35 | #define WDKEY_SEQ0 0xe51a |
| 36 | #define WDKEY_SEQ1 0xa35c |
| 37 | |
| 38 | #define WDT_PRELOAD_SHIFT 13 |
| 39 | |
| 40 | #define WDT_PRELOAD_MAX 0xfff |
| 41 | |
| 42 | struct rti_wdt_priv { |
| 43 | phys_addr_t regs; |
Jan Kiszka | 817e153 | 2022-03-08 07:25:50 +0100 | [diff] [blame] | 44 | unsigned int clk_hz; |
Jan Kiszka | d388f36 | 2020-06-23 13:15:08 +0200 | [diff] [blame] | 45 | }; |
| 46 | |
Jan Kiszka | f3efb1d | 2021-09-18 08:17:55 +0200 | [diff] [blame] | 47 | #ifdef CONFIG_WDT_K3_RTI_LOAD_FW |
| 48 | #define RTI_WDT_FIT_PATH "/fit-images/k3-rti-wdt-firmware" |
| 49 | |
| 50 | static int rti_wdt_load_fw(struct udevice *dev) |
| 51 | { |
| 52 | struct udevice *rproc_dev; |
| 53 | int primary_core, ret; |
| 54 | u32 cluster_mode; |
| 55 | ofnode node; |
| 56 | u64 rti_wdt_fw; |
| 57 | u32 rti_wdt_fw_size; |
| 58 | |
| 59 | node = ofnode_path(RTI_WDT_FIT_PATH); |
| 60 | if (!ofnode_valid(node)) |
| 61 | goto fit_error; |
| 62 | |
| 63 | ret = ofnode_read_u64(node, "load", &rti_wdt_fw); |
| 64 | if (ret) |
| 65 | goto fit_error; |
| 66 | ret = ofnode_read_u32(node, "size", &rti_wdt_fw_size); |
| 67 | if (ret) |
| 68 | goto fit_error; |
| 69 | |
| 70 | node = ofnode_by_compatible(ofnode_null(), "ti,am654-r5fss"); |
| 71 | if (!ofnode_valid(node)) |
| 72 | goto dt_error; |
| 73 | |
| 74 | ret = ofnode_read_u32(node, "ti,cluster-mode", &cluster_mode); |
| 75 | if (ret) |
| 76 | cluster_mode = 1; |
| 77 | |
| 78 | node = ofnode_by_compatible(node, "ti,am654-r5f"); |
| 79 | if (!ofnode_valid(node)) |
| 80 | goto dt_error; |
| 81 | |
| 82 | ret = uclass_get_device_by_ofnode(UCLASS_REMOTEPROC, node, &rproc_dev); |
| 83 | if (ret) |
| 84 | return ret; |
| 85 | |
| 86 | primary_core = dev_seq(rproc_dev); |
| 87 | |
| 88 | ret = rproc_dev_init(primary_core); |
| 89 | if (ret) |
| 90 | goto fw_error; |
| 91 | |
| 92 | if (cluster_mode == 1) { |
| 93 | ret = rproc_dev_init(primary_core + 1); |
| 94 | if (ret) |
| 95 | goto fw_error; |
| 96 | } |
| 97 | |
| 98 | ret = rproc_load(primary_core, (ulong)rti_wdt_fw, |
| 99 | rti_wdt_fw_size); |
| 100 | if (ret) |
| 101 | goto fw_error; |
| 102 | |
| 103 | ret = rproc_start(primary_core); |
| 104 | if (ret) |
| 105 | goto fw_error; |
| 106 | |
| 107 | return 0; |
| 108 | |
| 109 | fit_error: |
| 110 | dev_err(dev, "No loadable firmware found under %s\n", RTI_WDT_FIT_PATH); |
| 111 | return -ENOENT; |
| 112 | |
| 113 | dt_error: |
| 114 | dev_err(dev, "No compatible firmware target processor found\n"); |
| 115 | return -ENODEV; |
| 116 | |
| 117 | fw_error: |
| 118 | dev_err(dev, "Failed to load watchdog firmware into remote processor %d\n", |
| 119 | primary_core); |
| 120 | return ret; |
| 121 | } |
| 122 | #else |
| 123 | static inline int rti_wdt_load_fw(struct udevice *dev) |
| 124 | { |
| 125 | return 0; |
| 126 | } |
| 127 | #endif |
| 128 | |
Jan Kiszka | d388f36 | 2020-06-23 13:15:08 +0200 | [diff] [blame] | 129 | static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) |
| 130 | { |
| 131 | struct rti_wdt_priv *priv = dev_get_priv(dev); |
| 132 | u32 timer_margin; |
| 133 | int ret; |
| 134 | |
| 135 | if (readl(priv->regs + RTIDWDCTRL) == WDENABLE_KEY) |
| 136 | return -EBUSY; |
| 137 | |
Jan Kiszka | f3efb1d | 2021-09-18 08:17:55 +0200 | [diff] [blame] | 138 | ret = rti_wdt_load_fw(dev); |
| 139 | if (ret < 0) |
| 140 | return ret; |
| 141 | |
Jan Kiszka | 817e153 | 2022-03-08 07:25:50 +0100 | [diff] [blame] | 142 | timer_margin = timeout_ms * priv->clk_hz / 1000; |
Jan Kiszka | d388f36 | 2020-06-23 13:15:08 +0200 | [diff] [blame] | 143 | timer_margin >>= WDT_PRELOAD_SHIFT; |
| 144 | if (timer_margin > WDT_PRELOAD_MAX) |
| 145 | timer_margin = WDT_PRELOAD_MAX; |
| 146 | |
| 147 | writel(timer_margin, priv->regs + RTIDWDPRLD); |
| 148 | writel(RTIWWDRX_NMI, priv->regs + RTIWWDRXCTRL); |
| 149 | writel(RTIWWDSIZE_50P, priv->regs + RTIWWDSIZECTRL); |
| 150 | |
| 151 | readl(priv->regs + RTIWWDSIZECTRL); |
| 152 | |
| 153 | writel(WDENABLE_KEY, priv->regs + RTIDWDCTRL); |
| 154 | |
| 155 | return 0; |
| 156 | } |
| 157 | |
| 158 | static int rti_wdt_reset(struct udevice *dev) |
| 159 | { |
| 160 | struct rti_wdt_priv *priv = dev_get_priv(dev); |
| 161 | u32 prld; |
| 162 | |
| 163 | /* Make sure we do not reset too early */ |
| 164 | prld = readl(priv->regs + RTIDWDPRLD) << WDT_PRELOAD_SHIFT; |
| 165 | if (readl(priv->regs + RTIDWDCNTR) >= prld / 2) |
| 166 | return -EPERM; |
| 167 | |
| 168 | writel(WDKEY_SEQ0, priv->regs + RTIWDKEY); |
| 169 | writel(WDKEY_SEQ1, priv->regs + RTIWDKEY); |
| 170 | |
| 171 | return 0; |
| 172 | } |
| 173 | |
| 174 | static int rti_wdt_probe(struct udevice *dev) |
| 175 | { |
| 176 | struct rti_wdt_priv *priv = dev_get_priv(dev); |
| 177 | struct clk clk; |
| 178 | int ret; |
| 179 | |
| 180 | priv->regs = devfdt_get_addr(dev); |
| 181 | if (!priv->regs) |
| 182 | return -EINVAL; |
| 183 | |
| 184 | ret = clk_get_by_index(dev, 0, &clk); |
| 185 | if (ret) |
| 186 | return ret; |
| 187 | |
Jan Kiszka | 817e153 | 2022-03-08 07:25:50 +0100 | [diff] [blame] | 188 | priv->clk_hz = clk_get_rate(&clk); |
| 189 | |
| 190 | /* |
| 191 | * If watchdog is running at 32k clock, it is not accurate. |
| 192 | * Adjust frequency down in this case so that it does not expire |
| 193 | * earlier than expected. |
| 194 | */ |
| 195 | if (priv->clk_hz < 32768) |
| 196 | priv->clk_hz = priv->clk_hz * 9 / 10; |
Jan Kiszka | d388f36 | 2020-06-23 13:15:08 +0200 | [diff] [blame] | 197 | |
| 198 | return 0; |
| 199 | } |
| 200 | |
| 201 | static const struct wdt_ops rti_wdt_ops = { |
| 202 | .start = rti_wdt_start, |
| 203 | .reset = rti_wdt_reset, |
| 204 | }; |
| 205 | |
| 206 | static const struct udevice_id rti_wdt_ids[] = { |
| 207 | { .compatible = "ti,j7-rti-wdt" }, |
| 208 | { } |
| 209 | }; |
| 210 | |
| 211 | U_BOOT_DRIVER(rti_wdt) = { |
| 212 | .name = "rti_wdt", |
| 213 | .id = UCLASS_WDT, |
| 214 | .of_match = rti_wdt_ids, |
| 215 | .ops = &rti_wdt_ops, |
| 216 | .probe = rti_wdt_probe, |
Simon Glass | 41575d8 | 2020-12-03 16:55:17 -0700 | [diff] [blame] | 217 | .priv_auto = sizeof(struct rti_wdt_priv), |
Simon Glass | a547fcb | 2021-01-24 14:32:42 -0700 | [diff] [blame] | 218 | .flags = DM_FLAG_LEAVE_PD_ON, |
Jan Kiszka | d388f36 | 2020-06-23 13:15:08 +0200 | [diff] [blame] | 219 | }; |