| Adam Ford | 1932145 | 2017-04-17 08:09:38 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Device Tree Source for OMAP3 SoC |
| 3 | * |
| 4 | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| 5 | * |
| 6 | * This file is licensed under the terms of the GNU General Public License |
| 7 | * version 2. This program is licensed "as is" without any warranty of any |
| 8 | * kind, whether express or implied. |
| 9 | */ |
| 10 | |
| 11 | #include <dt-bindings/gpio/gpio.h> |
| 12 | #include <dt-bindings/interrupt-controller/irq.h> |
| 13 | #include <dt-bindings/pinctrl/omap.h> |
| 14 | |
| 15 | / { |
| 16 | compatible = "ti,omap3430", "ti,omap3"; |
| 17 | interrupt-parent = <&intc>; |
| 18 | #address-cells = <1>; |
| 19 | #size-cells = <1>; |
| 20 | chosen { }; |
| 21 | |
| 22 | aliases { |
| 23 | i2c0 = &i2c1; |
| 24 | i2c1 = &i2c2; |
| 25 | i2c2 = &i2c3; |
| 26 | serial0 = &uart1; |
| 27 | serial1 = &uart2; |
| 28 | serial2 = &uart3; |
| 29 | }; |
| 30 | |
| 31 | cpus { |
| 32 | #address-cells = <1>; |
| 33 | #size-cells = <0>; |
| 34 | |
| 35 | cpu@0 { |
| 36 | compatible = "arm,cortex-a8"; |
| 37 | device_type = "cpu"; |
| 38 | reg = <0x0>; |
| 39 | |
| 40 | clocks = <&dpll1_ck>; |
| 41 | clock-names = "cpu"; |
| 42 | |
| 43 | clock-latency = <300000>; /* From omap-cpufreq driver */ |
| 44 | }; |
| 45 | }; |
| 46 | |
| 47 | pmu@54000000 { |
| 48 | compatible = "arm,cortex-a8-pmu"; |
| 49 | reg = <0x54000000 0x800000>; |
| 50 | interrupts = <3>; |
| 51 | ti,hwmods = "debugss"; |
| 52 | }; |
| 53 | |
| 54 | /* |
| 55 | * The soc node represents the soc top level view. It is used for IPs |
| 56 | * that are not memory mapped in the MPU view or for the MPU itself. |
| 57 | */ |
| 58 | soc { |
| 59 | compatible = "ti,omap-infra"; |
| 60 | mpu { |
| 61 | compatible = "ti,omap3-mpu"; |
| 62 | ti,hwmods = "mpu"; |
| 63 | }; |
| 64 | |
| 65 | iva: iva { |
| 66 | compatible = "ti,iva2.2"; |
| 67 | ti,hwmods = "iva"; |
| 68 | |
| 69 | dsp { |
| 70 | compatible = "ti,omap3-c64"; |
| 71 | }; |
| 72 | }; |
| 73 | }; |
| 74 | |
| 75 | /* |
| 76 | * XXX: Use a flat representation of the OMAP3 interconnect. |
| 77 | * The real OMAP interconnect network is quite complex. |
| 78 | * Since it will not bring real advantage to represent that in DT for |
| 79 | * the moment, just use a fake OCP bus entry to represent the whole bus |
| 80 | * hierarchy. |
| 81 | */ |
| 82 | ocp@68000000 { |
| 83 | compatible = "ti,omap3-l3-smx", "simple-bus"; |
| 84 | reg = <0x68000000 0x10000>; |
| 85 | interrupts = <9 10>; |
| 86 | #address-cells = <1>; |
| 87 | #size-cells = <1>; |
| 88 | ranges; |
| 89 | ti,hwmods = "l3_main"; |
| 90 | |
| 91 | l4_core: l4@48000000 { |
| 92 | compatible = "ti,omap3-l4-core", "simple-bus"; |
| 93 | #address-cells = <1>; |
| 94 | #size-cells = <1>; |
| 95 | ranges = <0 0x48000000 0x1000000>; |
| 96 | |
| 97 | scm: scm@2000 { |
| 98 | compatible = "ti,omap3-scm", "simple-bus"; |
| 99 | reg = <0x2000 0x2000>; |
| 100 | #address-cells = <1>; |
| 101 | #size-cells = <1>; |
| 102 | ranges = <0 0x2000 0x2000>; |
| 103 | |
| 104 | omap3_pmx_core: pinmux@30 { |
| 105 | compatible = "ti,omap3-padconf", |
| 106 | "pinctrl-single"; |
| 107 | reg = <0x30 0x238>; |
| 108 | #address-cells = <1>; |
| 109 | #size-cells = <0>; |
| 110 | #interrupt-cells = <1>; |
| 111 | interrupt-controller; |
| 112 | pinctrl-single,register-width = <16>; |
| 113 | pinctrl-single,function-mask = <0xff1f>; |
| 114 | }; |
| 115 | |
| 116 | scm_conf: scm_conf@270 { |
| 117 | compatible = "syscon", "simple-bus"; |
| 118 | reg = <0x270 0x330>; |
| 119 | #address-cells = <1>; |
| 120 | #size-cells = <1>; |
| 121 | ranges = <0 0x270 0x330>; |
| 122 | |
| 123 | pbias_regulator: pbias_regulator@2b0 { |
| 124 | compatible = "ti,pbias-omap3", "ti,pbias-omap"; |
| 125 | reg = <0x2b0 0x4>; |
| 126 | syscon = <&scm_conf>; |
| 127 | pbias_mmc_reg: pbias_mmc_omap2430 { |
| 128 | regulator-name = "pbias_mmc_omap2430"; |
| 129 | regulator-min-microvolt = <1800000>; |
| 130 | regulator-max-microvolt = <3000000>; |
| 131 | }; |
| 132 | }; |
| 133 | |
| 134 | scm_clocks: clocks { |
| 135 | #address-cells = <1>; |
| 136 | #size-cells = <0>; |
| 137 | }; |
| 138 | }; |
| 139 | |
| 140 | scm_clockdomains: clockdomains { |
| 141 | }; |
| 142 | |
| 143 | omap3_pmx_wkup: pinmux@a00 { |
| 144 | compatible = "ti,omap3-padconf", |
| 145 | "pinctrl-single"; |
| 146 | reg = <0xa00 0x5c>; |
| 147 | #address-cells = <1>; |
| 148 | #size-cells = <0>; |
| 149 | #interrupt-cells = <1>; |
| 150 | interrupt-controller; |
| 151 | pinctrl-single,register-width = <16>; |
| 152 | pinctrl-single,function-mask = <0xff1f>; |
| 153 | }; |
| 154 | }; |
| 155 | }; |
| 156 | |
| 157 | aes: aes@480c5000 { |
| 158 | compatible = "ti,omap3-aes"; |
| 159 | ti,hwmods = "aes"; |
| 160 | reg = <0x480c5000 0x50>; |
| 161 | interrupts = <0>; |
| 162 | dmas = <&sdma 65 &sdma 66>; |
| 163 | dma-names = "tx", "rx"; |
| 164 | }; |
| 165 | |
| 166 | prm: prm@48306000 { |
| 167 | compatible = "ti,omap3-prm"; |
| 168 | reg = <0x48306000 0x4000>; |
| 169 | interrupts = <11>; |
| 170 | |
| 171 | prm_clocks: clocks { |
| 172 | #address-cells = <1>; |
| 173 | #size-cells = <0>; |
| 174 | }; |
| 175 | |
| 176 | prm_clockdomains: clockdomains { |
| 177 | }; |
| 178 | }; |
| 179 | |
| 180 | cm: cm@48004000 { |
| 181 | compatible = "ti,omap3-cm"; |
| 182 | reg = <0x48004000 0x4000>; |
| 183 | |
| 184 | cm_clocks: clocks { |
| 185 | #address-cells = <1>; |
| 186 | #size-cells = <0>; |
| 187 | }; |
| 188 | |
| 189 | cm_clockdomains: clockdomains { |
| 190 | }; |
| 191 | }; |
| 192 | |
| 193 | counter32k: counter@48320000 { |
| 194 | compatible = "ti,omap-counter32k"; |
| 195 | reg = <0x48320000 0x20>; |
| 196 | ti,hwmods = "counter_32k"; |
| 197 | }; |
| 198 | |
| 199 | intc: interrupt-controller@48200000 { |
| 200 | compatible = "ti,omap3-intc"; |
| 201 | interrupt-controller; |
| 202 | #interrupt-cells = <1>; |
| 203 | reg = <0x48200000 0x1000>; |
| 204 | }; |
| 205 | |
| 206 | sdma: dma-controller@48056000 { |
| 207 | compatible = "ti,omap3630-sdma", "ti,omap3430-sdma"; |
| 208 | reg = <0x48056000 0x1000>; |
| 209 | interrupts = <12>, |
| 210 | <13>, |
| 211 | <14>, |
| 212 | <15>; |
| 213 | #dma-cells = <1>; |
| 214 | dma-channels = <32>; |
| 215 | dma-requests = <96>; |
| 216 | }; |
| 217 | |
| 218 | gpio1: gpio@48310000 { |
| 219 | compatible = "ti,omap3-gpio"; |
| 220 | reg = <0x48310000 0x200>; |
| 221 | interrupts = <29>; |
| 222 | ti,hwmods = "gpio1"; |
| 223 | ti,gpio-always-on; |
| 224 | gpio-controller; |
| 225 | #gpio-cells = <2>; |
| 226 | interrupt-controller; |
| 227 | #interrupt-cells = <2>; |
| 228 | }; |
| 229 | |
| 230 | gpio2: gpio@49050000 { |
| 231 | compatible = "ti,omap3-gpio"; |
| 232 | reg = <0x49050000 0x200>; |
| 233 | interrupts = <30>; |
| 234 | ti,hwmods = "gpio2"; |
| 235 | gpio-controller; |
| 236 | #gpio-cells = <2>; |
| 237 | interrupt-controller; |
| 238 | #interrupt-cells = <2>; |
| 239 | }; |
| 240 | |
| 241 | gpio3: gpio@49052000 { |
| 242 | compatible = "ti,omap3-gpio"; |
| 243 | reg = <0x49052000 0x200>; |
| 244 | interrupts = <31>; |
| 245 | ti,hwmods = "gpio3"; |
| 246 | gpio-controller; |
| 247 | #gpio-cells = <2>; |
| 248 | interrupt-controller; |
| 249 | #interrupt-cells = <2>; |
| 250 | }; |
| 251 | |
| 252 | gpio4: gpio@49054000 { |
| 253 | compatible = "ti,omap3-gpio"; |
| 254 | reg = <0x49054000 0x200>; |
| 255 | interrupts = <32>; |
| 256 | ti,hwmods = "gpio4"; |
| 257 | gpio-controller; |
| 258 | #gpio-cells = <2>; |
| 259 | interrupt-controller; |
| 260 | #interrupt-cells = <2>; |
| 261 | }; |
| 262 | |
| 263 | gpio5: gpio@49056000 { |
| 264 | compatible = "ti,omap3-gpio"; |
| 265 | reg = <0x49056000 0x200>; |
| 266 | interrupts = <33>; |
| 267 | ti,hwmods = "gpio5"; |
| 268 | gpio-controller; |
| 269 | #gpio-cells = <2>; |
| 270 | interrupt-controller; |
| 271 | #interrupt-cells = <2>; |
| 272 | }; |
| 273 | |
| 274 | gpio6: gpio@49058000 { |
| 275 | compatible = "ti,omap3-gpio"; |
| 276 | reg = <0x49058000 0x200>; |
| 277 | interrupts = <34>; |
| 278 | ti,hwmods = "gpio6"; |
| 279 | gpio-controller; |
| 280 | #gpio-cells = <2>; |
| 281 | interrupt-controller; |
| 282 | #interrupt-cells = <2>; |
| 283 | }; |
| 284 | |
| 285 | uart1: serial@4806a000 { |
| 286 | compatible = "ti,omap3-uart"; |
| 287 | reg = <0x4806a000 0x2000>; |
| 288 | reg-shift = <2>; |
| 289 | interrupts-extended = <&intc 72>; |
| 290 | dmas = <&sdma 49 &sdma 50>; |
| 291 | dma-names = "tx", "rx"; |
| 292 | ti,hwmods = "uart1"; |
| 293 | clock-frequency = <48000000>; |
| 294 | }; |
| 295 | |
| 296 | uart2: serial@4806c000 { |
| 297 | compatible = "ti,omap3-uart"; |
| 298 | reg = <0x4806c000 0x400>; |
| 299 | interrupts-extended = <&intc 73>; |
| 300 | dmas = <&sdma 51 &sdma 52>; |
| 301 | dma-names = "tx", "rx"; |
| 302 | ti,hwmods = "uart2"; |
| 303 | clock-frequency = <48000000>; |
| 304 | }; |
| 305 | |
| 306 | uart3: serial@49020000 { |
| 307 | compatible = "ti,omap3-uart"; |
| 308 | reg = <0x49020000 0x400>; |
| 309 | interrupts-extended = <&intc 74>; |
| 310 | dmas = <&sdma 53 &sdma 54>; |
| 311 | dma-names = "tx", "rx"; |
| 312 | ti,hwmods = "uart3"; |
| 313 | clock-frequency = <48000000>; |
| 314 | }; |
| 315 | |
| 316 | i2c1: i2c@48070000 { |
| 317 | compatible = "ti,omap3-i2c"; |
| 318 | reg = <0x48070000 0x80>; |
| 319 | interrupts = <56>; |
| 320 | dmas = <&sdma 27 &sdma 28>; |
| 321 | dma-names = "tx", "rx"; |
| 322 | #address-cells = <1>; |
| 323 | #size-cells = <0>; |
| 324 | ti,hwmods = "i2c1"; |
| 325 | }; |
| 326 | |
| 327 | i2c2: i2c@48072000 { |
| 328 | compatible = "ti,omap3-i2c"; |
| 329 | reg = <0x48072000 0x80>; |
| 330 | interrupts = <57>; |
| 331 | dmas = <&sdma 29 &sdma 30>; |
| 332 | dma-names = "tx", "rx"; |
| 333 | #address-cells = <1>; |
| 334 | #size-cells = <0>; |
| 335 | ti,hwmods = "i2c2"; |
| 336 | }; |
| 337 | |
| 338 | i2c3: i2c@48060000 { |
| 339 | compatible = "ti,omap3-i2c"; |
| 340 | reg = <0x48060000 0x80>; |
| 341 | interrupts = <61>; |
| 342 | dmas = <&sdma 25 &sdma 26>; |
| 343 | dma-names = "tx", "rx"; |
| 344 | #address-cells = <1>; |
| 345 | #size-cells = <0>; |
| 346 | ti,hwmods = "i2c3"; |
| 347 | }; |
| 348 | |
| 349 | mailbox: mailbox@48094000 { |
| 350 | compatible = "ti,omap3-mailbox"; |
| 351 | ti,hwmods = "mailbox"; |
| 352 | reg = <0x48094000 0x200>; |
| 353 | interrupts = <26>; |
| 354 | #mbox-cells = <1>; |
| 355 | ti,mbox-num-users = <2>; |
| 356 | ti,mbox-num-fifos = <2>; |
| 357 | mbox_dsp: dsp { |
| 358 | ti,mbox-tx = <0 0 0>; |
| 359 | ti,mbox-rx = <1 0 0>; |
| 360 | }; |
| 361 | }; |
| 362 | |
| 363 | mcspi1: spi@48098000 { |
| 364 | compatible = "ti,omap2-mcspi"; |
| 365 | reg = <0x48098000 0x100>; |
| 366 | interrupts = <65>; |
| 367 | #address-cells = <1>; |
| 368 | #size-cells = <0>; |
| 369 | ti,hwmods = "mcspi1"; |
| 370 | ti,spi-num-cs = <4>; |
| 371 | dmas = <&sdma 35>, |
| 372 | <&sdma 36>, |
| 373 | <&sdma 37>, |
| 374 | <&sdma 38>, |
| 375 | <&sdma 39>, |
| 376 | <&sdma 40>, |
| 377 | <&sdma 41>, |
| 378 | <&sdma 42>; |
| 379 | dma-names = "tx0", "rx0", "tx1", "rx1", |
| 380 | "tx2", "rx2", "tx3", "rx3"; |
| 381 | }; |
| 382 | |
| 383 | mcspi2: spi@4809a000 { |
| 384 | compatible = "ti,omap2-mcspi"; |
| 385 | reg = <0x4809a000 0x100>; |
| 386 | interrupts = <66>; |
| 387 | #address-cells = <1>; |
| 388 | #size-cells = <0>; |
| 389 | ti,hwmods = "mcspi2"; |
| 390 | ti,spi-num-cs = <2>; |
| 391 | dmas = <&sdma 43>, |
| 392 | <&sdma 44>, |
| 393 | <&sdma 45>, |
| 394 | <&sdma 46>; |
| 395 | dma-names = "tx0", "rx0", "tx1", "rx1"; |
| 396 | }; |
| 397 | |
| 398 | mcspi3: spi@480b8000 { |
| 399 | compatible = "ti,omap2-mcspi"; |
| 400 | reg = <0x480b8000 0x100>; |
| 401 | interrupts = <91>; |
| 402 | #address-cells = <1>; |
| 403 | #size-cells = <0>; |
| 404 | ti,hwmods = "mcspi3"; |
| 405 | ti,spi-num-cs = <2>; |
| 406 | dmas = <&sdma 15>, |
| 407 | <&sdma 16>, |
| 408 | <&sdma 23>, |
| 409 | <&sdma 24>; |
| 410 | dma-names = "tx0", "rx0", "tx1", "rx1"; |
| 411 | }; |
| 412 | |
| 413 | mcspi4: spi@480ba000 { |
| 414 | compatible = "ti,omap2-mcspi"; |
| 415 | reg = <0x480ba000 0x100>; |
| 416 | interrupts = <48>; |
| 417 | #address-cells = <1>; |
| 418 | #size-cells = <0>; |
| 419 | ti,hwmods = "mcspi4"; |
| 420 | ti,spi-num-cs = <1>; |
| 421 | dmas = <&sdma 70>, <&sdma 71>; |
| 422 | dma-names = "tx0", "rx0"; |
| 423 | }; |
| 424 | |
| 425 | hdqw1w: 1w@480b2000 { |
| 426 | compatible = "ti,omap3-1w"; |
| 427 | reg = <0x480b2000 0x1000>; |
| 428 | interrupts = <58>; |
| 429 | ti,hwmods = "hdq1w"; |
| 430 | }; |
| 431 | |
| 432 | mmc1: mmc@4809c000 { |
| 433 | compatible = "ti,omap3-hsmmc"; |
| 434 | reg = <0x4809c000 0x200>; |
| 435 | interrupts = <83>; |
| 436 | ti,hwmods = "mmc1"; |
| 437 | ti,dual-volt; |
| 438 | dmas = <&sdma 61>, <&sdma 62>; |
| 439 | dma-names = "tx", "rx"; |
| 440 | pbias-supply = <&pbias_mmc_reg>; |
| 441 | }; |
| 442 | |
| 443 | mmc2: mmc@480b4000 { |
| 444 | compatible = "ti,omap3-hsmmc"; |
| 445 | reg = <0x480b4000 0x200>; |
| 446 | interrupts = <86>; |
| 447 | ti,hwmods = "mmc2"; |
| 448 | dmas = <&sdma 47>, <&sdma 48>; |
| 449 | dma-names = "tx", "rx"; |
| 450 | }; |
| 451 | |
| 452 | mmc3: mmc@480ad000 { |
| 453 | compatible = "ti,omap3-hsmmc"; |
| 454 | reg = <0x480ad000 0x200>; |
| 455 | interrupts = <94>; |
| 456 | ti,hwmods = "mmc3"; |
| 457 | dmas = <&sdma 77>, <&sdma 78>; |
| 458 | dma-names = "tx", "rx"; |
| 459 | }; |
| 460 | |
| 461 | mmu_isp: mmu@480bd400 { |
| 462 | #iommu-cells = <0>; |
| 463 | compatible = "ti,omap2-iommu"; |
| 464 | reg = <0x480bd400 0x80>; |
| 465 | interrupts = <24>; |
| 466 | ti,hwmods = "mmu_isp"; |
| 467 | ti,#tlb-entries = <8>; |
| 468 | }; |
| 469 | |
| 470 | mmu_iva: mmu@5d000000 { |
| 471 | #iommu-cells = <0>; |
| 472 | compatible = "ti,omap2-iommu"; |
| 473 | reg = <0x5d000000 0x80>; |
| 474 | interrupts = <28>; |
| 475 | ti,hwmods = "mmu_iva"; |
| 476 | status = "disabled"; |
| 477 | }; |
| 478 | |
| 479 | wdt2: wdt@48314000 { |
| 480 | compatible = "ti,omap3-wdt"; |
| 481 | reg = <0x48314000 0x80>; |
| 482 | ti,hwmods = "wd_timer2"; |
| 483 | }; |
| 484 | |
| 485 | mcbsp1: mcbsp@48074000 { |
| 486 | compatible = "ti,omap3-mcbsp"; |
| 487 | reg = <0x48074000 0xff>; |
| 488 | reg-names = "mpu"; |
| 489 | interrupts = <16>, /* OCP compliant interrupt */ |
| 490 | <59>, /* TX interrupt */ |
| 491 | <60>; /* RX interrupt */ |
| 492 | interrupt-names = "common", "tx", "rx"; |
| 493 | ti,buffer-size = <128>; |
| 494 | ti,hwmods = "mcbsp1"; |
| 495 | dmas = <&sdma 31>, |
| 496 | <&sdma 32>; |
| 497 | dma-names = "tx", "rx"; |
| 498 | clocks = <&mcbsp1_fck>; |
| 499 | clock-names = "fck"; |
| 500 | status = "disabled"; |
| 501 | }; |
| 502 | |
| 503 | mcbsp2: mcbsp@49022000 { |
| 504 | compatible = "ti,omap3-mcbsp"; |
| 505 | reg = <0x49022000 0xff>, |
| 506 | <0x49028000 0xff>; |
| 507 | reg-names = "mpu", "sidetone"; |
| 508 | interrupts = <17>, /* OCP compliant interrupt */ |
| 509 | <62>, /* TX interrupt */ |
| 510 | <63>, /* RX interrupt */ |
| 511 | <4>; /* Sidetone */ |
| 512 | interrupt-names = "common", "tx", "rx", "sidetone"; |
| 513 | ti,buffer-size = <1280>; |
| 514 | ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; |
| 515 | dmas = <&sdma 33>, |
| 516 | <&sdma 34>; |
| 517 | dma-names = "tx", "rx"; |
| 518 | clocks = <&mcbsp2_fck>, <&mcbsp2_ick>; |
| 519 | clock-names = "fck", "ick"; |
| 520 | status = "disabled"; |
| 521 | }; |
| 522 | |
| 523 | mcbsp3: mcbsp@49024000 { |
| 524 | compatible = "ti,omap3-mcbsp"; |
| 525 | reg = <0x49024000 0xff>, |
| 526 | <0x4902a000 0xff>; |
| 527 | reg-names = "mpu", "sidetone"; |
| 528 | interrupts = <22>, /* OCP compliant interrupt */ |
| 529 | <89>, /* TX interrupt */ |
| 530 | <90>, /* RX interrupt */ |
| 531 | <5>; /* Sidetone */ |
| 532 | interrupt-names = "common", "tx", "rx", "sidetone"; |
| 533 | ti,buffer-size = <128>; |
| 534 | ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; |
| 535 | dmas = <&sdma 17>, |
| 536 | <&sdma 18>; |
| 537 | dma-names = "tx", "rx"; |
| 538 | clocks = <&mcbsp3_fck>, <&mcbsp3_ick>; |
| 539 | clock-names = "fck", "ick"; |
| 540 | status = "disabled"; |
| 541 | }; |
| 542 | |
| 543 | mcbsp4: mcbsp@49026000 { |
| 544 | compatible = "ti,omap3-mcbsp"; |
| 545 | reg = <0x49026000 0xff>; |
| 546 | reg-names = "mpu"; |
| 547 | interrupts = <23>, /* OCP compliant interrupt */ |
| 548 | <54>, /* TX interrupt */ |
| 549 | <55>; /* RX interrupt */ |
| 550 | interrupt-names = "common", "tx", "rx"; |
| 551 | ti,buffer-size = <128>; |
| 552 | ti,hwmods = "mcbsp4"; |
| 553 | dmas = <&sdma 19>, |
| 554 | <&sdma 20>; |
| 555 | dma-names = "tx", "rx"; |
| 556 | clocks = <&mcbsp4_fck>; |
| 557 | clock-names = "fck"; |
| 558 | status = "disabled"; |
| 559 | }; |
| 560 | |
| 561 | mcbsp5: mcbsp@48096000 { |
| 562 | compatible = "ti,omap3-mcbsp"; |
| 563 | reg = <0x48096000 0xff>; |
| 564 | reg-names = "mpu"; |
| 565 | interrupts = <27>, /* OCP compliant interrupt */ |
| 566 | <81>, /* TX interrupt */ |
| 567 | <82>; /* RX interrupt */ |
| 568 | interrupt-names = "common", "tx", "rx"; |
| 569 | ti,buffer-size = <128>; |
| 570 | ti,hwmods = "mcbsp5"; |
| 571 | dmas = <&sdma 21>, |
| 572 | <&sdma 22>; |
| 573 | dma-names = "tx", "rx"; |
| 574 | clocks = <&mcbsp5_fck>; |
| 575 | clock-names = "fck"; |
| 576 | status = "disabled"; |
| 577 | }; |
| 578 | |
| 579 | sham: sham@480c3000 { |
| 580 | compatible = "ti,omap3-sham"; |
| 581 | ti,hwmods = "sham"; |
| 582 | reg = <0x480c3000 0x64>; |
| 583 | interrupts = <49>; |
| 584 | dmas = <&sdma 69>; |
| 585 | dma-names = "rx"; |
| 586 | }; |
| 587 | |
| 588 | smartreflex_core: smartreflex@480cb000 { |
| 589 | compatible = "ti,omap3-smartreflex-core"; |
| 590 | ti,hwmods = "smartreflex_core"; |
| 591 | reg = <0x480cb000 0x400>; |
| 592 | interrupts = <19>; |
| 593 | }; |
| 594 | |
| 595 | smartreflex_mpu_iva: smartreflex@480c9000 { |
| 596 | compatible = "ti,omap3-smartreflex-iva"; |
| 597 | ti,hwmods = "smartreflex_mpu_iva"; |
| 598 | reg = <0x480c9000 0x400>; |
| 599 | interrupts = <18>; |
| 600 | }; |
| 601 | |
| 602 | timer1: timer@48318000 { |
| 603 | compatible = "ti,omap3430-timer"; |
| 604 | reg = <0x48318000 0x400>; |
| 605 | interrupts = <37>; |
| 606 | ti,hwmods = "timer1"; |
| 607 | ti,timer-alwon; |
| 608 | }; |
| 609 | |
| 610 | timer2: timer@49032000 { |
| 611 | compatible = "ti,omap3430-timer"; |
| 612 | reg = <0x49032000 0x400>; |
| 613 | interrupts = <38>; |
| 614 | ti,hwmods = "timer2"; |
| 615 | }; |
| 616 | |
| 617 | timer3: timer@49034000 { |
| 618 | compatible = "ti,omap3430-timer"; |
| 619 | reg = <0x49034000 0x400>; |
| 620 | interrupts = <39>; |
| 621 | ti,hwmods = "timer3"; |
| 622 | }; |
| 623 | |
| 624 | timer4: timer@49036000 { |
| 625 | compatible = "ti,omap3430-timer"; |
| 626 | reg = <0x49036000 0x400>; |
| 627 | interrupts = <40>; |
| 628 | ti,hwmods = "timer4"; |
| 629 | }; |
| 630 | |
| 631 | timer5: timer@49038000 { |
| 632 | compatible = "ti,omap3430-timer"; |
| 633 | reg = <0x49038000 0x400>; |
| 634 | interrupts = <41>; |
| 635 | ti,hwmods = "timer5"; |
| 636 | ti,timer-dsp; |
| 637 | }; |
| 638 | |
| 639 | timer6: timer@4903a000 { |
| 640 | compatible = "ti,omap3430-timer"; |
| 641 | reg = <0x4903a000 0x400>; |
| 642 | interrupts = <42>; |
| 643 | ti,hwmods = "timer6"; |
| 644 | ti,timer-dsp; |
| 645 | }; |
| 646 | |
| 647 | timer7: timer@4903c000 { |
| 648 | compatible = "ti,omap3430-timer"; |
| 649 | reg = <0x4903c000 0x400>; |
| 650 | interrupts = <43>; |
| 651 | ti,hwmods = "timer7"; |
| 652 | ti,timer-dsp; |
| 653 | }; |
| 654 | |
| 655 | timer8: timer@4903e000 { |
| 656 | compatible = "ti,omap3430-timer"; |
| 657 | reg = <0x4903e000 0x400>; |
| 658 | interrupts = <44>; |
| 659 | ti,hwmods = "timer8"; |
| 660 | ti,timer-pwm; |
| 661 | ti,timer-dsp; |
| 662 | }; |
| 663 | |
| 664 | timer9: timer@49040000 { |
| 665 | compatible = "ti,omap3430-timer"; |
| 666 | reg = <0x49040000 0x400>; |
| 667 | interrupts = <45>; |
| 668 | ti,hwmods = "timer9"; |
| 669 | ti,timer-pwm; |
| 670 | }; |
| 671 | |
| 672 | timer10: timer@48086000 { |
| 673 | compatible = "ti,omap3430-timer"; |
| 674 | reg = <0x48086000 0x400>; |
| 675 | interrupts = <46>; |
| 676 | ti,hwmods = "timer10"; |
| 677 | ti,timer-pwm; |
| 678 | }; |
| 679 | |
| 680 | timer11: timer@48088000 { |
| 681 | compatible = "ti,omap3430-timer"; |
| 682 | reg = <0x48088000 0x400>; |
| 683 | interrupts = <47>; |
| 684 | ti,hwmods = "timer11"; |
| 685 | ti,timer-pwm; |
| 686 | }; |
| 687 | |
| 688 | timer12: timer@48304000 { |
| 689 | compatible = "ti,omap3430-timer"; |
| 690 | reg = <0x48304000 0x400>; |
| 691 | interrupts = <95>; |
| 692 | ti,hwmods = "timer12"; |
| 693 | ti,timer-alwon; |
| 694 | ti,timer-secure; |
| 695 | }; |
| 696 | |
| 697 | usbhstll: usbhstll@48062000 { |
| 698 | compatible = "ti,usbhs-tll"; |
| 699 | reg = <0x48062000 0x1000>; |
| 700 | interrupts = <78>; |
| 701 | ti,hwmods = "usb_tll_hs"; |
| 702 | }; |
| 703 | |
| 704 | usbhshost: usbhshost@48064000 { |
| 705 | compatible = "ti,usbhs-host"; |
| 706 | reg = <0x48064000 0x400>; |
| 707 | ti,hwmods = "usb_host_hs"; |
| 708 | #address-cells = <1>; |
| 709 | #size-cells = <1>; |
| 710 | ranges; |
| 711 | |
| 712 | usbhsohci: ohci@48064400 { |
| 713 | compatible = "ti,ohci-omap3"; |
| 714 | reg = <0x48064400 0x400>; |
| 715 | interrupt-parent = <&intc>; |
| 716 | interrupts = <76>; |
| 717 | }; |
| 718 | |
| 719 | usbhsehci: ehci@48064800 { |
| 720 | compatible = "ti,ehci-omap"; |
| 721 | reg = <0x48064800 0x400>; |
| 722 | interrupt-parent = <&intc>; |
| 723 | interrupts = <77>; |
| 724 | }; |
| 725 | }; |
| 726 | |
| 727 | gpmc: gpmc@6e000000 { |
| 728 | compatible = "ti,omap3430-gpmc"; |
| 729 | ti,hwmods = "gpmc"; |
| 730 | reg = <0x6e000000 0x02d0>; |
| 731 | interrupts = <20>; |
| 732 | dmas = <&sdma 4>; |
| 733 | dma-names = "rxtx"; |
| 734 | gpmc,num-cs = <8>; |
| 735 | gpmc,num-waitpins = <4>; |
| 736 | #address-cells = <2>; |
| 737 | #size-cells = <1>; |
| 738 | interrupt-controller; |
| 739 | #interrupt-cells = <2>; |
| 740 | gpio-controller; |
| 741 | #gpio-cells = <2>; |
| 742 | }; |
| 743 | |
| 744 | usb_otg_hs: usb_otg_hs@480ab000 { |
| 745 | compatible = "ti,omap3-musb"; |
| 746 | reg = <0x480ab000 0x1000>; |
| 747 | interrupts = <92>, <93>; |
| 748 | interrupt-names = "mc", "dma"; |
| 749 | ti,hwmods = "usb_otg_hs"; |
| 750 | multipoint = <1>; |
| 751 | num-eps = <16>; |
| 752 | ram-bits = <12>; |
| 753 | }; |
| 754 | |
| 755 | dss: dss@48050000 { |
| 756 | compatible = "ti,omap3-dss"; |
| 757 | reg = <0x48050000 0x200>; |
| 758 | status = "disabled"; |
| 759 | ti,hwmods = "dss_core"; |
| 760 | clocks = <&dss1_alwon_fck>; |
| 761 | clock-names = "fck"; |
| 762 | #address-cells = <1>; |
| 763 | #size-cells = <1>; |
| 764 | ranges; |
| 765 | |
| 766 | dispc@48050400 { |
| 767 | compatible = "ti,omap3-dispc"; |
| 768 | reg = <0x48050400 0x400>; |
| 769 | interrupts = <25>; |
| 770 | ti,hwmods = "dss_dispc"; |
| 771 | clocks = <&dss1_alwon_fck>; |
| 772 | clock-names = "fck"; |
| 773 | }; |
| 774 | |
| 775 | dsi: encoder@4804fc00 { |
| 776 | compatible = "ti,omap3-dsi"; |
| 777 | reg = <0x4804fc00 0x200>, |
| 778 | <0x4804fe00 0x40>, |
| 779 | <0x4804ff00 0x20>; |
| 780 | reg-names = "proto", "phy", "pll"; |
| 781 | interrupts = <25>; |
| 782 | status = "disabled"; |
| 783 | ti,hwmods = "dss_dsi1"; |
| 784 | clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; |
| 785 | clock-names = "fck", "sys_clk"; |
| 786 | }; |
| 787 | |
| 788 | rfbi: encoder@48050800 { |
| 789 | compatible = "ti,omap3-rfbi"; |
| 790 | reg = <0x48050800 0x100>; |
| 791 | status = "disabled"; |
| 792 | ti,hwmods = "dss_rfbi"; |
| 793 | clocks = <&dss1_alwon_fck>, <&dss_ick>; |
| 794 | clock-names = "fck", "ick"; |
| 795 | }; |
| 796 | |
| 797 | venc: encoder@48050c00 { |
| 798 | compatible = "ti,omap3-venc"; |
| 799 | reg = <0x48050c00 0x100>; |
| 800 | status = "disabled"; |
| 801 | ti,hwmods = "dss_venc"; |
| 802 | clocks = <&dss_tv_fck>; |
| 803 | clock-names = "fck"; |
| 804 | }; |
| 805 | }; |
| 806 | |
| 807 | ssi: ssi-controller@48058000 { |
| 808 | compatible = "ti,omap3-ssi"; |
| 809 | ti,hwmods = "ssi"; |
| 810 | |
| 811 | status = "disabled"; |
| 812 | |
| 813 | reg = <0x48058000 0x1000>, |
| 814 | <0x48059000 0x1000>; |
| 815 | reg-names = "sys", |
| 816 | "gdd"; |
| 817 | |
| 818 | interrupts = <71>; |
| 819 | interrupt-names = "gdd_mpu"; |
| 820 | |
| 821 | #address-cells = <1>; |
| 822 | #size-cells = <1>; |
| 823 | ranges; |
| 824 | |
| 825 | ssi_port1: ssi-port@4805a000 { |
| 826 | compatible = "ti,omap3-ssi-port"; |
| 827 | |
| 828 | reg = <0x4805a000 0x800>, |
| 829 | <0x4805a800 0x800>; |
| 830 | reg-names = "tx", |
| 831 | "rx"; |
| 832 | |
| 833 | interrupt-parent = <&intc>; |
| 834 | interrupts = <67>, |
| 835 | <68>; |
| 836 | }; |
| 837 | |
| 838 | ssi_port2: ssi-port@4805b000 { |
| 839 | compatible = "ti,omap3-ssi-port"; |
| 840 | |
| 841 | reg = <0x4805b000 0x800>, |
| 842 | <0x4805b800 0x800>; |
| 843 | reg-names = "tx", |
| 844 | "rx"; |
| 845 | |
| 846 | interrupt-parent = <&intc>; |
| 847 | interrupts = <69>, |
| 848 | <70>; |
| 849 | }; |
| 850 | }; |
| 851 | }; |
| 852 | }; |
| 853 | |
| 854 | /include/ "omap3xxx-clocks.dtsi" |