Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | // |
| 3 | // Copyright (C) 2014 Freescale Semiconductor, Inc. |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 4 | |
| 5 | /dts-v1/; |
| 6 | |
| 7 | #include <dt-bindings/gpio/gpio.h> |
| 8 | #include <dt-bindings/input/input.h> |
| 9 | #include "imx6sx.dtsi" |
| 10 | |
| 11 | / { |
| 12 | model = "Freescale i.MX6 SoloX SDB Board"; |
| 13 | compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; |
| 14 | |
| 15 | chosen { |
| 16 | stdout-path = &uart1; |
| 17 | }; |
| 18 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 19 | memory@80000000 { |
| 20 | device_type = "memory"; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 21 | reg = <0x80000000 0x40000000>; |
| 22 | }; |
| 23 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 24 | backlight_display: backlight-display { |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 25 | compatible = "pwm-backlight"; |
| 26 | pwms = <&pwm3 0 5000000>; |
| 27 | brightness-levels = <0 4 8 16 32 64 128 255>; |
| 28 | default-brightness-level = <6>; |
| 29 | }; |
| 30 | |
| 31 | gpio-keys { |
| 32 | compatible = "gpio-keys"; |
| 33 | pinctrl-names = "default"; |
| 34 | pinctrl-0 = <&pinctrl_gpio_keys>; |
| 35 | |
| 36 | volume-up { |
| 37 | label = "Volume Up"; |
| 38 | gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; |
| 39 | linux,code = <KEY_VOLUMEUP>; |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 40 | wakeup-source; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 41 | }; |
| 42 | |
| 43 | volume-down { |
| 44 | label = "Volume Down"; |
| 45 | gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| 46 | linux,code = <KEY_VOLUMEDOWN>; |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 47 | wakeup-source; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 48 | }; |
| 49 | }; |
| 50 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 51 | vcc_sd3: regulator-vcc-sd3 { |
| 52 | compatible = "regulator-fixed"; |
| 53 | pinctrl-names = "default"; |
| 54 | pinctrl-0 = <&pinctrl_vcc_sd3>; |
| 55 | regulator-name = "VCC_SD3"; |
| 56 | regulator-min-microvolt = <3000000>; |
| 57 | regulator-max-microvolt = <3000000>; |
| 58 | gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
| 59 | enable-active-high; |
| 60 | }; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 61 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 62 | reg_usb_otg1_vbus: regulator-usb-otg1-vbus { |
| 63 | compatible = "regulator-fixed"; |
| 64 | pinctrl-names = "default"; |
| 65 | pinctrl-0 = <&pinctrl_usb_otg1>; |
| 66 | regulator-name = "usb_otg1_vbus"; |
| 67 | regulator-min-microvolt = <5000000>; |
| 68 | regulator-max-microvolt = <5000000>; |
| 69 | gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| 70 | enable-active-high; |
| 71 | }; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 72 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 73 | reg_usb_otg2_vbus: regulator-usb-otg2-vbus { |
| 74 | compatible = "regulator-fixed"; |
| 75 | pinctrl-names = "default"; |
| 76 | pinctrl-0 = <&pinctrl_usb_otg2>; |
| 77 | regulator-name = "usb_otg2_vbus"; |
| 78 | regulator-min-microvolt = <5000000>; |
| 79 | regulator-max-microvolt = <5000000>; |
| 80 | gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 81 | enable-active-high; |
| 82 | }; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 83 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 84 | reg_psu_5v: regulator-psu-5v { |
| 85 | compatible = "regulator-fixed"; |
| 86 | regulator-name = "PSU-5V0"; |
| 87 | regulator-min-microvolt = <5000000>; |
| 88 | regulator-max-microvolt = <5000000>; |
| 89 | }; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 90 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 91 | reg_lcd_3v3: regulator-lcd-3v3 { |
| 92 | compatible = "regulator-fixed"; |
| 93 | regulator-name = "lcd-3v3"; |
| 94 | gpio = <&gpio3 27 0>; |
| 95 | enable-active-high; |
| 96 | }; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 97 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 98 | reg_peri_3v3: regulator-peri-3v3 { |
| 99 | compatible = "regulator-fixed"; |
| 100 | pinctrl-names = "default"; |
| 101 | pinctrl-0 = <&pinctrl_peri_3v3>; |
| 102 | regulator-name = "peri_3v3"; |
| 103 | regulator-min-microvolt = <3300000>; |
| 104 | regulator-max-microvolt = <3300000>; |
| 105 | gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; |
| 106 | enable-active-high; |
| 107 | regulator-always-on; |
| 108 | }; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 109 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 110 | reg_enet_3v3: regulator-enet-3v3 { |
| 111 | compatible = "regulator-fixed"; |
| 112 | pinctrl-names = "default"; |
| 113 | pinctrl-0 = <&pinctrl_enet_3v3>; |
| 114 | regulator-name = "enet_3v3"; |
| 115 | regulator-min-microvolt = <3300000>; |
| 116 | regulator-max-microvolt = <3300000>; |
| 117 | gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; |
| 118 | regulator-boot-on; |
| 119 | regulator-always-on; |
| 120 | }; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 121 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 122 | reg_pcie_gpio: regulator-pcie-gpio { |
| 123 | compatible = "regulator-fixed"; |
| 124 | pinctrl-names = "default"; |
| 125 | pinctrl-0 = <&pinctrl_pcie_reg>; |
| 126 | regulator-name = "MPCIE_3V3"; |
| 127 | regulator-min-microvolt = <3300000>; |
| 128 | regulator-max-microvolt = <3300000>; |
| 129 | gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| 130 | enable-active-high; |
| 131 | }; |
| 132 | |
| 133 | reg_lcd_5v: regulator-lcd-5v { |
| 134 | compatible = "regulator-fixed"; |
| 135 | regulator-name = "lcd-5v0"; |
| 136 | regulator-min-microvolt = <5000000>; |
| 137 | regulator-max-microvolt = <5000000>; |
| 138 | }; |
| 139 | |
| 140 | reg_can_en: regulator-can-en { |
| 141 | compatible = "regulator-fixed"; |
| 142 | regulator-name = "can-en"; |
| 143 | regulator-min-microvolt = <3300000>; |
| 144 | regulator-max-microvolt = <3300000>; |
| 145 | }; |
| 146 | |
| 147 | reg_can_stby: regulator-can-stby { |
| 148 | compatible = "regulator-fixed"; |
| 149 | regulator-name = "can-stby"; |
| 150 | regulator-min-microvolt = <3300000>; |
| 151 | regulator-max-microvolt = <3300000>; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 152 | }; |
| 153 | |
| 154 | sound { |
| 155 | compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; |
| 156 | model = "wm8962-audio"; |
| 157 | ssi-controller = <&ssi2>; |
| 158 | audio-codec = <&codec>; |
| 159 | audio-routing = |
| 160 | "Headphone Jack", "HPOUTL", |
| 161 | "Headphone Jack", "HPOUTR", |
| 162 | "Ext Spk", "SPKOUTL", |
| 163 | "Ext Spk", "SPKOUTR", |
| 164 | "AMIC", "MICBIAS", |
| 165 | "IN3R", "AMIC"; |
| 166 | mux-int-port = <2>; |
| 167 | mux-ext-port = <6>; |
| 168 | }; |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 169 | |
| 170 | panel { |
| 171 | compatible = "sii,43wvf1g"; |
| 172 | backlight = <&backlight_display>; |
| 173 | dvdd-supply = <®_lcd_3v3>; |
| 174 | avdd-supply = <®_lcd_5v>; |
| 175 | |
| 176 | port { |
| 177 | panel_in: endpoint { |
| 178 | remote-endpoint = <&display_out>; |
| 179 | }; |
| 180 | }; |
| 181 | }; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 182 | }; |
| 183 | |
| 184 | &audmux { |
| 185 | pinctrl-names = "default"; |
| 186 | pinctrl-0 = <&pinctrl_audmux>; |
| 187 | status = "okay"; |
| 188 | }; |
| 189 | |
| 190 | &fec1 { |
| 191 | pinctrl-names = "default"; |
| 192 | pinctrl-0 = <&pinctrl_enet1>; |
| 193 | phy-supply = <®_enet_3v3>; |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 194 | phy-mode = "rgmii-id"; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 195 | phy-handle = <ðphy1>; |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 196 | phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 197 | status = "okay"; |
| 198 | |
| 199 | mdio { |
| 200 | #address-cells = <1>; |
| 201 | #size-cells = <0>; |
| 202 | |
| 203 | ethphy1: ethernet-phy@1 { |
| 204 | reg = <1>; |
| 205 | }; |
| 206 | |
| 207 | ethphy2: ethernet-phy@2 { |
| 208 | reg = <2>; |
| 209 | }; |
| 210 | }; |
| 211 | }; |
| 212 | |
| 213 | &fec2 { |
| 214 | pinctrl-names = "default"; |
| 215 | pinctrl-0 = <&pinctrl_enet2>; |
| 216 | phy-mode = "rgmii"; |
| 217 | phy-handle = <ðphy2>; |
| 218 | status = "okay"; |
| 219 | }; |
| 220 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 221 | &flexcan1 { |
| 222 | pinctrl-names = "default"; |
| 223 | pinctrl-0 = <&pinctrl_flexcan1>; |
| 224 | xceiver-supply = <®_can_stby>; |
| 225 | status = "okay"; |
| 226 | }; |
| 227 | |
| 228 | &flexcan2 { |
| 229 | pinctrl-names = "default"; |
| 230 | pinctrl-0 = <&pinctrl_flexcan2>; |
| 231 | xceiver-supply = <®_can_stby>; |
| 232 | status = "okay"; |
| 233 | }; |
| 234 | |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 235 | &i2c3 { |
| 236 | clock-frequency = <100000>; |
| 237 | pinctrl-names = "default"; |
| 238 | pinctrl-0 = <&pinctrl_i2c3>; |
| 239 | status = "okay"; |
| 240 | }; |
| 241 | |
| 242 | &i2c4 { |
| 243 | clock-frequency = <100000>; |
| 244 | pinctrl-names = "default"; |
| 245 | pinctrl-0 = <&pinctrl_i2c4>; |
| 246 | status = "okay"; |
| 247 | |
| 248 | codec: wm8962@1a { |
| 249 | compatible = "wlf,wm8962"; |
| 250 | reg = <0x1a>; |
| 251 | clocks = <&clks IMX6SX_CLK_AUDIO>; |
| 252 | DCVDD-supply = <&vgen4_reg>; |
| 253 | DBVDD-supply = <&vgen4_reg>; |
| 254 | AVDD-supply = <&vgen4_reg>; |
| 255 | CPVDD-supply = <&vgen4_reg>; |
| 256 | MICVDD-supply = <&vgen3_reg>; |
| 257 | PLLVDD-supply = <&vgen4_reg>; |
| 258 | SPKVDD1-supply = <®_psu_5v>; |
| 259 | SPKVDD2-supply = <®_psu_5v>; |
| 260 | }; |
| 261 | }; |
| 262 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 263 | &pcie { |
| 264 | pinctrl-names = "default"; |
| 265 | pinctrl-0 = <&pinctrl_pcie>; |
| 266 | reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; |
| 267 | vpcie-supply = <®_pcie_gpio>; |
| 268 | status = "okay"; |
| 269 | }; |
| 270 | |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 271 | &lcdif1 { |
| 272 | pinctrl-names = "default"; |
| 273 | pinctrl-0 = <&pinctrl_lcd>; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 274 | status = "okay"; |
| 275 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 276 | port { |
| 277 | display_out: endpoint { |
| 278 | remote-endpoint = <&panel_in>; |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 279 | }; |
| 280 | }; |
| 281 | }; |
| 282 | |
| 283 | &pwm3 { |
| 284 | pinctrl-names = "default"; |
| 285 | pinctrl-0 = <&pinctrl_pwm3>; |
| 286 | status = "okay"; |
| 287 | }; |
| 288 | |
| 289 | &snvs_poweroff { |
| 290 | status = "okay"; |
| 291 | }; |
| 292 | |
| 293 | &sai1 { |
| 294 | pinctrl-names = "default"; |
| 295 | pinctrl-0 = <&pinctrl_sai1>; |
| 296 | status = "disabled"; |
| 297 | }; |
| 298 | |
| 299 | &ssi2 { |
| 300 | status = "okay"; |
| 301 | }; |
| 302 | |
| 303 | &uart1 { |
| 304 | pinctrl-names = "default"; |
| 305 | pinctrl-0 = <&pinctrl_uart1>; |
| 306 | status = "okay"; |
| 307 | }; |
| 308 | |
| 309 | &uart5 { /* for bluetooth */ |
| 310 | pinctrl-names = "default"; |
| 311 | pinctrl-0 = <&pinctrl_uart5>; |
| 312 | uart-has-rtscts; |
| 313 | status = "okay"; |
| 314 | }; |
| 315 | |
| 316 | &usbotg1 { |
| 317 | vbus-supply = <®_usb_otg1_vbus>; |
| 318 | pinctrl-names = "default"; |
| 319 | pinctrl-0 = <&pinctrl_usb_otg1_id>; |
| 320 | status = "okay"; |
| 321 | }; |
| 322 | |
| 323 | &usbotg2 { |
| 324 | vbus-supply = <®_usb_otg2_vbus>; |
| 325 | dr_mode = "host"; |
| 326 | status = "okay"; |
| 327 | }; |
| 328 | |
| 329 | &usbphy1 { |
| 330 | fsl,tx-d-cal = <106>; |
| 331 | }; |
| 332 | |
| 333 | &usbphy2 { |
| 334 | fsl,tx-d-cal = <106>; |
| 335 | }; |
| 336 | |
| 337 | &usdhc2 { |
| 338 | pinctrl-names = "default"; |
| 339 | pinctrl-0 = <&pinctrl_usdhc2>; |
| 340 | non-removable; |
| 341 | no-1-8-v; |
| 342 | keep-power-in-suspend; |
| 343 | wakeup-source; |
| 344 | status = "okay"; |
| 345 | }; |
| 346 | |
| 347 | &usdhc3 { |
| 348 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 349 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 350 | pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| 351 | pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| 352 | bus-width = <8>; |
| 353 | cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; |
| 354 | wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; |
| 355 | keep-power-in-suspend; |
| 356 | wakeup-source; |
| 357 | vmmc-supply = <&vcc_sd3>; |
| 358 | status = "okay"; |
| 359 | }; |
| 360 | |
| 361 | &usdhc4 { |
| 362 | pinctrl-names = "default"; |
| 363 | pinctrl-0 = <&pinctrl_usdhc4>; |
| 364 | cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; |
| 365 | wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; |
| 366 | status = "okay"; |
| 367 | }; |
| 368 | |
| 369 | &wdog1 { |
| 370 | pinctrl-names = "default"; |
| 371 | pinctrl-0 = <&pinctrl_wdog>; |
| 372 | fsl,ext-reset-output; |
| 373 | }; |
| 374 | |
| 375 | &iomuxc { |
| 376 | imx6x-sdb { |
| 377 | pinctrl_audmux: audmuxgrp { |
| 378 | fsl,pins = < |
| 379 | MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 |
| 380 | MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 |
| 381 | MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 |
| 382 | MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 |
| 383 | MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 |
| 384 | >; |
| 385 | }; |
| 386 | |
| 387 | pinctrl_enet1: enet1grp { |
| 388 | fsl,pins = < |
| 389 | MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 |
| 390 | MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 |
| 391 | MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 |
| 392 | MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 |
| 393 | MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 |
| 394 | MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 |
| 395 | MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 |
| 396 | MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 |
| 397 | MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 |
| 398 | MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 |
| 399 | MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 |
| 400 | MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 |
| 401 | MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 |
| 402 | MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 |
| 403 | MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 404 | /* phy reset */ |
| 405 | MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0 |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 406 | >; |
| 407 | }; |
| 408 | |
| 409 | pinctrl_enet_3v3: enet3v3grp { |
| 410 | fsl,pins = < |
| 411 | MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 |
| 412 | >; |
| 413 | }; |
| 414 | |
| 415 | pinctrl_enet2: enet2grp { |
| 416 | fsl,pins = < |
| 417 | MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 |
| 418 | MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 |
| 419 | MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 |
| 420 | MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 |
| 421 | MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 |
| 422 | MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 |
| 423 | MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 |
| 424 | MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 |
| 425 | MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 |
| 426 | MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 |
| 427 | MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 |
| 428 | MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 |
| 429 | >; |
| 430 | }; |
| 431 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 432 | pinctrl_flexcan1: flexcan1grp { |
| 433 | fsl,pins = < |
| 434 | MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 |
| 435 | MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 |
| 436 | >; |
| 437 | }; |
| 438 | |
| 439 | pinctrl_flexcan2: flexcan2grp { |
| 440 | fsl,pins = < |
| 441 | MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 |
| 442 | MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 |
| 443 | >; |
| 444 | }; |
| 445 | |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 446 | pinctrl_gpio_keys: gpio_keysgrp { |
| 447 | fsl,pins = < |
| 448 | MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 |
| 449 | MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 |
| 450 | >; |
| 451 | }; |
| 452 | |
| 453 | pinctrl_i2c1: i2c1grp { |
| 454 | fsl,pins = < |
| 455 | MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 |
| 456 | MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 |
| 457 | >; |
| 458 | }; |
| 459 | |
| 460 | pinctrl_i2c3: i2c3grp { |
| 461 | fsl,pins = < |
| 462 | MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 |
| 463 | MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 |
| 464 | >; |
| 465 | }; |
| 466 | |
| 467 | pinctrl_i2c4: i2c4grp { |
| 468 | fsl,pins = < |
| 469 | MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 |
| 470 | MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 |
| 471 | >; |
| 472 | }; |
| 473 | |
| 474 | pinctrl_lcd: lcdgrp { |
| 475 | fsl,pins = < |
| 476 | MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 |
| 477 | MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 |
| 478 | MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 |
| 479 | MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 |
| 480 | MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 |
| 481 | MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 |
| 482 | MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 |
| 483 | MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 |
| 484 | MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 |
| 485 | MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 |
| 486 | MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 |
| 487 | MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 |
| 488 | MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 |
| 489 | MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 |
| 490 | MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 |
| 491 | MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 |
| 492 | MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 |
| 493 | MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 |
| 494 | MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 |
| 495 | MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 |
| 496 | MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 |
| 497 | MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 |
| 498 | MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 |
| 499 | MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 |
| 500 | MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 |
| 501 | MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 |
| 502 | MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 |
| 503 | MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 |
| 504 | MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 |
| 505 | >; |
| 506 | }; |
| 507 | |
Fabio Estevam | a29d79d | 2020-02-19 09:56:27 -0300 | [diff] [blame] | 508 | pinctrl_pcie: pciegrp { |
| 509 | fsl,pins = < |
| 510 | MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 |
| 511 | >; |
| 512 | }; |
| 513 | |
| 514 | pinctrl_pcie_reg: pciereggrp { |
| 515 | fsl,pins = < |
| 516 | MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0 |
| 517 | >; |
| 518 | }; |
| 519 | |
Peng Fan | 220e887 | 2018-01-02 09:32:04 +0800 | [diff] [blame] | 520 | pinctrl_peri_3v3: peri3v3grp { |
| 521 | fsl,pins = < |
| 522 | MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 |
| 523 | >; |
| 524 | }; |
| 525 | |
| 526 | pinctrl_pwm3: pwm3grp-1 { |
| 527 | fsl,pins = < |
| 528 | MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 |
| 529 | >; |
| 530 | }; |
| 531 | |
| 532 | pinctrl_qspi2: qspi2grp { |
| 533 | fsl,pins = < |
| 534 | MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 |
| 535 | MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 |
| 536 | MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 |
| 537 | MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 |
| 538 | MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 |
| 539 | MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 |
| 540 | MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 |
| 541 | MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 |
| 542 | MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 |
| 543 | MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 |
| 544 | MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 |
| 545 | MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 |
| 546 | >; |
| 547 | }; |
| 548 | |
| 549 | pinctrl_vcc_sd3: vccsd3grp { |
| 550 | fsl,pins = < |
| 551 | MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 |
| 552 | >; |
| 553 | }; |
| 554 | |
| 555 | pinctrl_sai1: sai1grp { |
| 556 | fsl,pins = < |
| 557 | MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x130b0 |
| 558 | MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x130b0 |
| 559 | MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x120b0 |
| 560 | MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x130b0 |
| 561 | MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 |
| 562 | >; |
| 563 | }; |
| 564 | |
| 565 | pinctrl_uart1: uart1grp { |
| 566 | fsl,pins = < |
| 567 | MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 |
| 568 | MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 |
| 569 | >; |
| 570 | }; |
| 571 | |
| 572 | pinctrl_uart5: uart5grp { |
| 573 | fsl,pins = < |
| 574 | MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 |
| 575 | MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 |
| 576 | MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 |
| 577 | MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 |
| 578 | >; |
| 579 | }; |
| 580 | |
| 581 | pinctrl_usb_otg1: usbotg1grp { |
| 582 | fsl,pins = < |
| 583 | MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 |
| 584 | >; |
| 585 | }; |
| 586 | |
| 587 | pinctrl_usb_otg1_id: usbotg1idgrp { |
| 588 | fsl,pins = < |
| 589 | MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 |
| 590 | >; |
| 591 | }; |
| 592 | |
| 593 | pinctrl_usb_otg2: usbot2ggrp { |
| 594 | fsl,pins = < |
| 595 | MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 |
| 596 | >; |
| 597 | }; |
| 598 | |
| 599 | pinctrl_usdhc2: usdhc2grp { |
| 600 | fsl,pins = < |
| 601 | MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 |
| 602 | MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 |
| 603 | MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 |
| 604 | MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 |
| 605 | MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 |
| 606 | MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 |
| 607 | >; |
| 608 | }; |
| 609 | |
| 610 | pinctrl_usdhc3: usdhc3grp { |
| 611 | fsl,pins = < |
| 612 | MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 |
| 613 | MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 |
| 614 | MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 |
| 615 | MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 |
| 616 | MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 |
| 617 | MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 |
| 618 | MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 |
| 619 | MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 |
| 620 | MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 |
| 621 | MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 |
| 622 | MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ |
| 623 | MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ |
| 624 | >; |
| 625 | }; |
| 626 | |
| 627 | pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { |
| 628 | fsl,pins = < |
| 629 | MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 |
| 630 | MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 |
| 631 | MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 |
| 632 | MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 |
| 633 | MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 |
| 634 | MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 |
| 635 | MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 |
| 636 | MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 |
| 637 | MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 |
| 638 | MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 |
| 639 | >; |
| 640 | }; |
| 641 | |
| 642 | pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { |
| 643 | fsl,pins = < |
| 644 | MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 |
| 645 | MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 |
| 646 | MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 |
| 647 | MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 |
| 648 | MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 |
| 649 | MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 |
| 650 | MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 |
| 651 | MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 |
| 652 | MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 |
| 653 | MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 |
| 654 | >; |
| 655 | }; |
| 656 | |
| 657 | pinctrl_usdhc4: usdhc4grp { |
| 658 | fsl,pins = < |
| 659 | MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 |
| 660 | MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 |
| 661 | MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 |
| 662 | MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 |
| 663 | MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 |
| 664 | MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 |
| 665 | MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ |
| 666 | MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ |
| 667 | >; |
| 668 | }; |
| 669 | |
| 670 | pinctrl_wdog: wdoggrp { |
| 671 | fsl,pins = < |
| 672 | MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 |
| 673 | >; |
| 674 | }; |
| 675 | }; |
| 676 | }; |