Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 12ca05a38bd47b207a6e616e80f2ab0453faf527 / . / include / configs / stout.h
blob: e3b9325961ff56e52fff68b87c3e7af3e7bf082e [file] [log] [blame]
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]1/*
2 * include/configs/stout.h
3 * This file is Stout board configuration.
4 *
5 * Copyright (C) 2015 Renesas Electronics Europe GmbH
6 * Copyright (C) 2015 Renesas Electronics Corporation
7 * Copyright (C) 2015 Cogent Embedded, Inc.
8 *
9 * SPDX-License-Identifier: GPL-2.0
10 */
11
12#ifndef __STOUT_H
13#define __STOUT_H
14
15#undef DEBUG
16#define CONFIG_R8A7790
Nobuhiro Iwamatsu1cc95f62015-10-10 05:58:28 +0900[diff] [blame]17#define CONFIG_ARCH_RMOBILE_BOARD_STRING "Stout"
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]18
19#include "rcar-gen2-common.h"
20
21/* #define CONFIG_BOARD_LATE_INIT */
22
Nobuhiro Iwamatsu1cc95f62015-10-10 05:58:28 +0900[diff] [blame]23#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]24#define CONFIG_SYS_TEXT_BASE 0xB0000000
25#else
26#define CONFIG_SYS_TEXT_BASE 0xE8080000
27#endif
28
29/* STACK */
30#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT)
31#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC
32#else
33#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC
34#endif
35#define STACK_AREA_SIZE 0xC000
36#define LOW_LEVEL_MERAM_STACK \
37 (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
38
39/* MEMORY */
40#define RCAR_GEN2_SDRAM_BASE 0x40000000
41#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
42#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
43
44/* SCIF */
45#define CONFIG_SCIF_CONSOLE
46#define CONFIG_SCIF_A
47
48/* SPI */
49#define CONFIG_SPI
50#define CONFIG_SH_QSPI
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]51#define CONFIG_SPI_FLASH_QUAD
52#define CONFIG_SYS_NO_FLASH
53
54/* SH Ether */
55#define CONFIG_SH_ETHER
56#define CONFIG_SH_ETHER_USE_PORT 0
57#define CONFIG_SH_ETHER_PHY_ADDR 0x1
58#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
59#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
60#define CONFIG_SH_ETHER_CACHE_WRITEBACK
61#define CONFIG_SH_ETHER_CACHE_INVALIDATE
62#define CONFIG_PHYLIB
63#define CONFIG_PHY_MICREL
64#define CONFIG_BITBANGMII
65#define CONFIG_BITBANGMII_MULTI
66
67/* I2C */
68#define CONFIG_SYS_I2C
69#define CONFIG_SYS_I2C_RCAR
70#define CONFIG_SYS_RCAR_I2C0_SPEED 400000
71#define CONFIG_SYS_RCAR_I2C1_SPEED 400000
72#define CONFIG_SYS_RCAR_I2C2_SPEED 400000
73#define CONFIG_SYS_RCAR_I2C3_SPEED 400000
74#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4
75
76#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
77
78/* Board Clock */
79#define RMOBILE_XTAL_CLK 20000000u
80#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
81#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
82#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
83#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2)
84#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15)
85#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12)
86
87#define CONFIG_SYS_TMU_CLK_DIV 4
88
89/* USB */
90#define CONFIG_USB_EHCI
91#define CONFIG_USB_EHCI_RMOBILE
92#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]93
94/* MMC */
95#define CONFIG_MMC
Vladimir Barinov21871132015-07-20 20:49:59 +0300[diff] [blame]96#define CONFIG_GENERIC_MMC
97
98/* Module stop status bits */
99/* INTC-RT */
100#define CONFIG_SMSTP0_ENA 0x00400000
101/* MSIF, SCIFA0 */
102#define CONFIG_SMSTP2_ENA 0x00002010
103/* INTC-SYS, IRQC */
104#define CONFIG_SMSTP4_ENA 0x00000180
105
106/* SDHI */
107#define CONFIG_SH_SDHI_FREQ 97500000
108
109#endif /* __STOUT_H */