blob: 73fc1be0141ecc7ee7a1cfd5f566e72e47f6cf81 [file] [log] [blame]
Luca Ceresoli6da4f672018-06-22 12:40:16 +02001# SPDX-License-Identifier: GPL-2.0
2#
3# Copyright (c) 2018, Luca Ceresoli <luca@lucaceresoli.net>
4
5if ARCH_ZYNQ || ARCH_ZYNQMP
6
7config XILINX_PS_INIT_FILE
8 string "Zynq/ZynqMP PS init file(s) location"
9 help
10 On Zynq and ZynqMP U-Boot SPL (or U-Boot proper if
11 ZYNQMP_PSU_INIT_ENABLED is set) is responsible for some
12 basic initializations, such as enabling peripherals and
13 configuring pinmuxes. The PS init file (called
14 psu_init_gpl.c on ZynqMP, ps7_init_gpl.c for Zynq-7000)
15 contains the code for such initializations.
16
17 U-Boot contains PS init files for some boards, but each of
18 them describes only one specific configuration. Users of a
19 different board, or needing a different configuration, can
20 generate custom files using the Xilinx development tools.
21
22 There are three ways to give a PS init file to U-Boot:
23
24 1. Set this variable to the path, either relative to the
25 source tree or absolute, where the psu_init_gpl.c or
26 ps7_init_gpl.c file is located. U-Boot will build this
27 file.
28
29 2. If you leave an empty string here, U-Boot will use
30 board/xilinx/zynq/$(CONFIG_DEFAULT_DEVICE_TREE)/ps7_init_gpl.c
31 for Zynq-7000, or
32 board/xilinx/zynqmp/$(CONFIG_DEFAULT_DEVICE_TREE)/psu_init_gpl.c
33 for ZynqMP.
34
35 3. If the above file does not exist, U-Boot will use
36 board/xilinx/zynq/ps7_init_gpl.c for Zynq-7000, or
37 board/xilinx/zynqmp/psu_init_gpl.c for ZynqMP. This file
38 is not provided by U-Boot, you have to copy it there
39 before the build.
40
41endif
Ibai Erkiagafec657b2019-10-02 15:57:36 +010042
Ibai Erkiagaf4e7e612019-10-02 15:57:37 +010043config XILINX_OF_BOARD_DTB_ADDR
Ibai Erkiagafec657b2019-10-02 15:57:36 +010044 hex
Ibai Erkiagaf4e7e612019-10-02 15:57:37 +010045 default 0x1000 if ARCH_VERSAL
46 default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
Michal Simekfc274a52019-12-19 17:45:15 +010047 depends on OF_BOARD || OF_SEPARATE
Ibai Erkiagafec657b2019-10-02 15:57:36 +010048 help
49 Offset in the memory where the board configuration DTB is placed.
T Karthik Reddy53c69de2019-12-18 03:34:41 -070050
51config BOOT_SCRIPT_OFFSET
52 hex "Boot script offset"
53 depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
54 default 0xFC0000 if ARCH_ZYNQ
55 default 0x3E80000 if ARCH_ZYNQMP
56 default 0x7F80000 if ARCH_VERSAL
57 help
58 Specifies distro boot script offset in NAND/NOR flash.