| Nobuhiro Iwamatsu | e525d34 | 2016-04-01 03:51:36 +0900 | [diff] [blame] | 1 | /* |
| 2 | * include/configs/salvator-x.h |
| 3 | * This file is Salvator-X board configuration. |
| 4 | * |
| 5 | * Copyright (C) 2015 Renesas Electronics Corporation |
| 6 | * |
| 7 | * SPDX-License-Identifier: GPL-2.0+ |
| 8 | */ |
| 9 | |
| 10 | #ifndef __SALVATOR_X_H |
| 11 | #define __SALVATOR_X_H |
| 12 | |
| 13 | #undef DEBUG |
| 14 | |
| 15 | #define CONFIG_RCAR_BOARD_STRING "Salvator-X" |
| 16 | |
| 17 | #include "rcar-gen3-common.h" |
| 18 | |
| 19 | /* SCIF */ |
| 20 | #define CONFIG_SCIF_CONSOLE |
| 21 | #define CONFIG_CONS_SCIF2 |
| 22 | #define CONFIG_CONS_INDEX 2 |
| 23 | #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ |
| 24 | |
| 25 | /* [A] Hyper Flash */ |
| 26 | /* use to RPC(SPI Multi I/O Bus Controller) */ |
| Nobuhiro Iwamatsu | e525d34 | 2016-04-01 03:51:36 +0900 | [diff] [blame] | 27 | #define CONFIG_ENV_IS_NOWHERE |
| 28 | |
| 29 | /* Board Clock */ |
| 30 | /* XTAL_CLK : 33.33MHz */ |
| 31 | #define RCAR_XTAL_CLK 33333333u |
| 32 | #define CONFIG_SYS_CLK_FREQ RCAR_XTAL_CLK |
| 33 | /* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */ |
| 34 | /* CPclk 16.66MHz, S3D2 133.33MHz */ |
| 35 | #define CONFIG_CP_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) |
| 36 | #define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 192 / 2) |
| 37 | #define CONFIG_S3D2_CLK_FREQ (266666666u/2) |
| 38 | |
| 39 | /* Generic Timer Definitions (use in assembler source) */ |
| 40 | #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ |
| 41 | |
| 42 | /* Generic Interrupt Controller Definitions */ |
| 43 | #define CONFIG_GICV2 |
| 44 | #define GICD_BASE 0xF1010000 |
| 45 | #define GICC_BASE 0xF1020000 |
| 46 | |
| 47 | /* Module stop status bits */ |
| 48 | /* MFIS, SCIF1 */ |
| 49 | #define CONFIG_SMSTP2_ENA 0x00002040 |
| 50 | /* INTC-AP, IRQC */ |
| 51 | #define CONFIG_SMSTP4_ENA 0x00000180 |
| 52 | |
| 53 | #endif /* __SALVATOR_X_H */ |