Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 13acc63e840a0349009d0f8382e04ae39e50c3d5 / . / arch / arm / dts / imx6qdl-gw52xx.dtsi
blob: de54b7c2174b0879b80fd1b242c15de5faa55122 [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11 /* these are used by bootloader for disabling nodes */
12 aliases {
13 led0 = &led0;
14 led1 = &led1;
15 led2 = &led2;
16 nand = &gpmi;
17 ssi0 = &ssi1;
18 usb0 = &usbh1;
19 usb1 = &usbotg;
20 };
21
22 chosen {
23 bootargs = "console=ttymxc1,115200";
24 };
25
26 backlight {
27 compatible = "pwm-backlight";
28 pwms = <&pwm4 0 5000000>;
29 brightness-levels = <0 4 8 16 32 64 128 255>;
30 default-brightness-level = <7>;
31 };
32
33 gpio-keys {
34 compatible = "gpio-keys";
35 #address-cells = <1>;
36 #size-cells = <0>;
37
38 user-pb {
39 label = "user_pb";
40 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
41 linux,code = <BTN_0>;
42 };
43
44 user-pb1x {
45 label = "user_pb1x";
46 linux,code = <BTN_1>;
47 interrupt-parent = <&gsc>;
48 interrupts = <0>;
49 };
50
51 key-erased {
52 label = "key-erased";
53 linux,code = <BTN_2>;
54 interrupt-parent = <&gsc>;
55 interrupts = <1>;
56 };
57
58 eeprom-wp {
59 label = "eeprom_wp";
60 linux,code = <BTN_3>;
61 interrupt-parent = <&gsc>;
62 interrupts = <2>;
63 };
64
65 tamper {
66 label = "tamper";
67 linux,code = <BTN_4>;
68 interrupt-parent = <&gsc>;
69 interrupts = <5>;
70 };
71
72 switch-hold {
73 label = "switch_hold";
74 linux,code = <BTN_5>;
75 interrupt-parent = <&gsc>;
76 interrupts = <7>;
77 };
78 };
79
80 leds {
81 compatible = "gpio-leds";
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_gpio_leds>;
84
85 led0: user1 {
86 label = "user1";
87 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
88 default-state = "on";
89 linux,default-trigger = "heartbeat";
90 };
91
92 led1: user2 {
93 label = "user2";
94 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
95 default-state = "off";
96 };
97
98 led2: user3 {
99 label = "user3";
100 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
101 default-state = "off";
102 };
103 };
104
105 memory@10000000 {
106 device_type = "memory";
107 reg = <0x10000000 0x20000000>;
108 };
109
110 pps {
111 compatible = "pps-gpio";
112 pinctrl-names = "default";
113 pinctrl-0 = <&pinctrl_pps>;
114 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
115 status = "okay";
116 };
117
118 reg_1p0v: regulator-1p0v {
119 compatible = "regulator-fixed";
120 regulator-name = "1P0V";
121 regulator-min-microvolt = <1000000>;
122 regulator-max-microvolt = <1000000>;
123 regulator-always-on;
124 };
125
126 reg_3p3v: regulator-3p3v {
127 compatible = "regulator-fixed";
128 regulator-name = "3P3V";
129 regulator-min-microvolt = <3300000>;
130 regulator-max-microvolt = <3300000>;
131 regulator-always-on;
132 };
133
134 reg_5p0v: regulator-5p0v {
135 compatible = "regulator-fixed";
136 regulator-name = "5P0V";
137 regulator-min-microvolt = <5000000>;
138 regulator-max-microvolt = <5000000>;
139 regulator-always-on;
140 };
141
142 reg_usb_otg_vbus: regulator-usb-otg-vbus {
143 compatible = "regulator-fixed";
144 regulator-name = "usb_otg_vbus";
145 regulator-min-microvolt = <5000000>;
146 regulator-max-microvolt = <5000000>;
147 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
148 enable-active-high;
149 };
150
151 sound {
152 compatible = "fsl,imx6q-ventana-sgtl5000",
153 "fsl,imx-audio-sgtl5000";
154 model = "sgtl5000-audio";
155 ssi-controller = <&ssi1>;
156 audio-codec = <&codec>;
157 audio-routing =
158 "MIC_IN", "Mic Jack",
159 "Mic Jack", "Mic Bias",
160 "Headphone Jack", "HP_OUT";
161 mux-int-port = <1>;
162 mux-ext-port = <4>;
163 };
164};
165
166&audmux {
167 pinctrl-names = "default";
168 pinctrl-0 = <&pinctrl_audmux>;
169 status = "okay";
170};
171
172&can1 {
173 pinctrl-names = "default";
174 pinctrl-0 = <&pinctrl_flexcan1>;
175 status = "okay";
176};
177
178&clks {
179 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
180 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
181 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
182 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
183};
184
185&ecspi3 {
186 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&pinctrl_ecspi3>;
189 status = "okay";
190};
191
192&fec {
193 pinctrl-names = "default";
194 pinctrl-0 = <&pinctrl_enet>;
195 phy-mode = "rgmii-id";
196 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
197 status = "okay";
198};
199
200&gpmi {
201 pinctrl-names = "default";
202 pinctrl-0 = <&pinctrl_gpmi_nand>;
203 status = "okay";
204};
205
206&hdmi {
207 ddc-i2c-bus = <&i2c3>;
208 status = "okay";
209};
210
211&i2c1 {
212 clock-frequency = <100000>;
213 pinctrl-names = "default";
214 pinctrl-0 = <&pinctrl_i2c1>;
215 status = "okay";
216
217 gsc: gsc@20 {
218 compatible = "gw,gsc";
219 reg = <0x20>;
220 interrupt-parent = <&gpio1>;
221 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
222 interrupt-controller;
223 #interrupt-cells = <1>;
224 #size-cells = <0>;
225
226 adc {
227 compatible = "gw,gsc-adc";
228 #address-cells = <1>;
229 #size-cells = <0>;
230
231 channel@0 {
232 gw,mode = <0>;
233 reg = <0x00>;
234 label = "temp";
235 };
236
237 channel@2 {
238 gw,mode = <1>;
239 reg = <0x02>;
240 label = "vdd_vin";
241 };
242
243 channel@5 {
244 gw,mode = <1>;
245 reg = <0x05>;
246 label = "vdd_3p3";
247 };
248
249 channel@8 {
250 gw,mode = <1>;
251 reg = <0x08>;
252 label = "vdd_bat";
253 };
254
255 channel@b {
256 gw,mode = <1>;
257 reg = <0x0b>;
258 label = "vdd_5p0";
259 };
260
261 channel@e {
262 gw,mode = <1>;
263 reg = <0xe>;
264 label = "vdd_arm";
265 };
266
267 channel@11 {
268 gw,mode = <1>;
269 reg = <0x11>;
270 label = "vdd_soc";
271 };
272
273 channel@14 {
274 gw,mode = <1>;
275 reg = <0x14>;
276 label = "vdd_3p0";
277 };
278
279 channel@17 {
280 gw,mode = <1>;
281 reg = <0x17>;
282 label = "vdd_1p5";
283 };
284
285 channel@1d {
286 gw,mode = <1>;
287 reg = <0x1d>;
288 label = "vdd_1p8";
289 };
290
291 channel@20 {
292 gw,mode = <1>;
293 reg = <0x20>;
294 label = "vdd_1p0";
295 };
296
297 channel@23 {
298 gw,mode = <1>;
299 reg = <0x23>;
300 label = "vdd_2p5";
301 };
302
303 channel@29 {
304 gw,mode = <1>;
305 reg = <0x29>;
306 label = "vdd_an1";
307 };
308 };
309 };
310
311 gsc_gpio: gpio@23 {
312 compatible = "nxp,pca9555";
313 reg = <0x23>;
314 gpio-controller;
315 #gpio-cells = <2>;
316 interrupt-parent = <&gsc>;
317 interrupts = <4>;
318 };
319
320 eeprom1: eeprom@50 {
321 compatible = "atmel,24c02";
322 reg = <0x50>;
323 pagesize = <16>;
324 };
325
326 eeprom2: eeprom@51 {
327 compatible = "atmel,24c02";
328 reg = <0x51>;
329 pagesize = <16>;
330 };
331
332 eeprom3: eeprom@52 {
333 compatible = "atmel,24c02";
334 reg = <0x52>;
335 pagesize = <16>;
336 };
337
338 eeprom4: eeprom@53 {
339 compatible = "atmel,24c02";
340 reg = <0x53>;
341 pagesize = <16>;
342 };
343
344 rtc: ds1672@68 {
345 compatible = "dallas,ds1672";
346 reg = <0x68>;
347 };
348};
349
350&i2c2 {
351 clock-frequency = <100000>;
352 pinctrl-names = "default";
353 pinctrl-0 = <&pinctrl_i2c2>;
354 status = "okay";
355
356 ltc3676: pmic@3c {
357 compatible = "lltc,ltc3676";
358 reg = <0x3c>;
359 pinctrl-names = "default";
360 pinctrl-0 = <&pinctrl_pmic>;
361 interrupt-parent = <&gpio1>;
362 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
363
364 regulators {
365 /* VDD_SOC (1+R1/R2 = 1.635) */
366 reg_vdd_soc: sw1 {
367 regulator-name = "vddsoc";
368 regulator-min-microvolt = <674400>;
369 regulator-max-microvolt = <1308000>;
370 lltc,fb-voltage-divider = <127000 200000>;
371 regulator-ramp-delay = <7000>;
372 regulator-boot-on;
373 regulator-always-on;
374 };
375
376 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
377 reg_1p8v: sw2 {
378 regulator-name = "vdd1p8";
379 regulator-min-microvolt = <1033310>;
380 regulator-max-microvolt = <2004000>;
381 lltc,fb-voltage-divider = <301000 200000>;
382 regulator-ramp-delay = <7000>;
383 regulator-boot-on;
384 regulator-always-on;
385 };
386
387 /* VDD_ARM (1+R1/R2 = 1.635) */
388 reg_vdd_arm: sw3 {
389 regulator-name = "vddarm";
390 regulator-min-microvolt = <674400>;
391 regulator-max-microvolt = <1308000>;
392 lltc,fb-voltage-divider = <127000 200000>;
393 regulator-ramp-delay = <7000>;
394 regulator-boot-on;
395 regulator-always-on;
396 };
397
398 /* VDD_DDR (1+R1/R2 = 2.105) */
399 reg_vdd_ddr: sw4 {
400 regulator-name = "vddddr";
401 regulator-min-microvolt = <868310>;
402 regulator-max-microvolt = <1684000>;
403 lltc,fb-voltage-divider = <221000 200000>;
404 regulator-ramp-delay = <7000>;
405 regulator-boot-on;
406 regulator-always-on;
407 };
408
409 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
410 reg_2p5v: ldo2 {
411 regulator-name = "vdd2p5";
412 regulator-min-microvolt = <2490375>;
413 regulator-max-microvolt = <2490375>;
414 lltc,fb-voltage-divider = <487000 200000>;
415 regulator-boot-on;
416 regulator-always-on;
417 };
418
419 /* VDD_AUD_1P8: Audio codec */
420 reg_aud_1p8v: ldo3 {
421 regulator-name = "vdd1p8a";
422 regulator-min-microvolt = <1800000>;
423 regulator-max-microvolt = <1800000>;
424 regulator-boot-on;
425 };
426
427 /* VDD_HIGH (1+R1/R2 = 4.17) */
428 reg_3p0v: ldo4 {
429 regulator-name = "vdd3p0";
430 regulator-min-microvolt = <3023250>;
431 regulator-max-microvolt = <3023250>;
432 lltc,fb-voltage-divider = <634000 200000>;
433 regulator-boot-on;
434 regulator-always-on;
435 };
436 };
437 };
438};
439
440&i2c3 {
441 clock-frequency = <100000>;
442 pinctrl-names = "default";
443 pinctrl-0 = <&pinctrl_i2c3>;
444 status = "okay";
445
446 codec: sgtl5000@a {
447 compatible = "fsl,sgtl5000";
448 reg = <0x0a>;
449 clocks = <&clks IMX6QDL_CLK_CKO>;
450 VDDA-supply = <&reg_1p8v>;
451 VDDIO-supply = <&reg_3p3v>;
452 };
453
454 touchscreen: egalax_ts@4 {
455 compatible = "eeti,egalax_ts";
456 reg = <0x04>;
457 interrupt-parent = <&gpio7>;
458 interrupts = <12 2>;
459 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
460 };
461
462 accel@1e {
463 compatible = "nxp,fxos8700";
464 reg = <0x1e>;
465 };
466};
467
468&ldb {
469 status = "okay";
470
471 lvds-channel@0 {
472 fsl,data-mapping = "spwg";
473 fsl,data-width = <18>;
474 status = "okay";
475
476 display-timings {
477 native-mode = <&timing0>;
478 timing0: hsd100pxn1 {
479 clock-frequency = <65000000>;
480 hactive = <1024>;
481 vactive = <768>;
482 hback-porch = <220>;
483 hfront-porch = <40>;
484 vback-porch = <21>;
485 vfront-porch = <7>;
486 hsync-len = <60>;
487 vsync-len = <10>;
488 };
489 };
490 };
491};
492
493&pcie {
494 pinctrl-names = "default";
495 pinctrl-0 = <&pinctrl_pcie>;
496 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
497 status = "okay";
498};
499
500&pwm2 {
501 pinctrl-names = "default";
502 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
503 status = "disabled";
504};
505
506&pwm3 {
507 pinctrl-names = "default";
508 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
509 status = "disabled";
510};
511
512&pwm4 {
513 #pwm-cells = <2>;
514 pinctrl-names = "default";
515 pinctrl-0 = <&pinctrl_pwm4>;
516 status = "okay";
517};
518
519&ssi1 {
520 status = "okay";
521};
522
523&uart1 {
524 pinctrl-names = "default";
525 pinctrl-0 = <&pinctrl_uart1>;
526 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
527 status = "okay";
528};
529
530&uart2 {
531 pinctrl-names = "default";
532 pinctrl-0 = <&pinctrl_uart2>;
533 status = "okay";
534};
535
536&uart5 {
537 pinctrl-names = "default";
538 pinctrl-0 = <&pinctrl_uart5>;
539 status = "okay";
540};
541
542&usbotg {
543 vbus-supply = <&reg_usb_otg_vbus>;
544 pinctrl-names = "default";
545 pinctrl-0 = <&pinctrl_usbotg>;
546 disable-over-current;
Tim Harvey13acc632021-03-01 14:33:31 -0800[diff] [blame^]547 dr_mode = "otg";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]548 status = "okay";
549};
550
551&usbh1 {
552 status = "okay";
553};
554
555&usdhc3 {
556 pinctrl-names = "default", "state_100mhz", "state_200mhz";
557 pinctrl-0 = <&pinctrl_usdhc3>;
558 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
559 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
560 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
561 vmmc-supply = <&reg_3p3v>;
562 no-1-8-v; /* firmware will remove if board revision supports */
563 status = "okay";
564};
565
566&wdog1 {
567 pinctrl-names = "default";
568 pinctrl-0 = <&pinctrl_wdog>;
569 fsl,ext-reset-output;
570};
571
572&iomuxc {
573 pinctrl_audmux: audmuxgrp {
574 fsl,pins = <
575 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
576 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
577 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
578 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
579 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
580 >;
581 };
582
583 pinctrl_ecspi3: escpi3grp {
584 fsl,pins = <
585 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
586 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
587 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
588 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
589 >;
590 };
591
592 pinctrl_enet: enetgrp {
593 fsl,pins = <
594 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
595 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
596 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
597 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
598 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
599 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
600 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
601 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
602 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
603 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
604 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
605 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
606 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
607 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
608 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
609 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
610 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */
611 >;
612 };
613
614 pinctrl_flexcan1: flexcan1grp {
615 fsl,pins = <
616 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
617 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
618 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
619 >;
620 };
621
622 pinctrl_gpio_leds: gpioledsgrp {
623 fsl,pins = <
624 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
625 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
626 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
627 >;
628 };
629
630 pinctrl_gpmi_nand: gpminandgrp {
631 fsl,pins = <
632 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
633 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
634 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
635 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
636 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
637 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
638 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
639 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
640 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
641 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
642 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
643 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
644 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
645 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
646 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
647 >;
648 };
649
650 pinctrl_i2c1: i2c1grp {
651 fsl,pins = <
652 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
653 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
654 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
655 >;
656 };
657
658 pinctrl_i2c2: i2c2grp {
659 fsl,pins = <
660 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
661 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
662 >;
663 };
664
665 pinctrl_i2c3: i2c3grp {
666 fsl,pins = <
667 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
668 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
669 >;
670 };
671
672 pinctrl_pcie: pciegrp {
673 fsl,pins = <
674 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */
675 >;
676 };
677
678 pinctrl_pmic: pmicgrp {
679 fsl,pins = <
680 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
681 >;
682 };
683
684 pinctrl_pps: ppsgrp {
685 fsl,pins = <
686 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
687 >;
688 };
689
690 pinctrl_pwm2: pwm2grp {
691 fsl,pins = <
692 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
693 >;
694 };
695
696 pinctrl_pwm3: pwm3grp {
697 fsl,pins = <
698 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
699 >;
700 };
701
702 pinctrl_pwm4: pwm4grp {
703 fsl,pins = <
704 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
705 >;
706 };
707
708 pinctrl_uart1: uart1grp {
709 fsl,pins = <
710 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
711 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
712 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
713 >;
714 };
715
716 pinctrl_uart2: uart2grp {
717 fsl,pins = <
718 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
719 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
720 >;
721 };
722
723 pinctrl_uart5: uart5grp {
724 fsl,pins = <
725 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
726 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
727 >;
728 };
729
730 pinctrl_usbotg: usbotggrp {
731 fsl,pins = <
732 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
733 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
734 >;
735 };
736
737 pinctrl_usdhc3: usdhc3grp {
738 fsl,pins = <
739 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
740 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
741 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
742 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
743 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
744 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
745 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
746 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
747 >;
748 };
749
750 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
751 fsl,pins = <
752 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
753 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
754 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
755 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
756 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
757 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
758 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
759 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
760 >;
761 };
762
763 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
764 fsl,pins = <
765 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
766 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
767 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
768 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
769 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
770 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
771 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
772 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
773 >;
774 };
775
776 pinctrl_wdog: wdoggrp {
777 fsl,pins = <
778 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
779 >;
780 };
781};