blob: 65a366ab041869a292f06d11aa8f6ab9b7bd0ba6 [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * (C) Copyright 2001
3 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_405GP 1 /* This is a PPC405 CPU */
wdenkc837dcb2004-01-20 23:12:12 +000037#define CONFIG_4xx 1 /* ...member of PPC4xx family */
38#define CONFIG_OCRTC 1 /* ...on a OCRTC board */
wdenkc6097192002-11-03 00:24:07 +000039
Wolfgang Denk2ae18242010-10-06 09:05:45 +020040#define CONFIG_SYS_TEXT_BASE 0xFFFD0000
41
wdenkc837dcb2004-01-20 23:12:12 +000042#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
wdenkc6097192002-11-03 00:24:07 +000043
wdenkc837dcb2004-01-20 23:12:12 +000044#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
wdenkc6097192002-11-03 00:24:07 +000045
46#define CONFIG_BAUDRATE 9600
47#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
48
49#undef CONFIG_BOOTARGS
50#define CONFIG_BOOTCOMMAND "go fff00100"
51
52#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020053#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
wdenkc6097192002-11-03 00:24:07 +000054
Ben Warren96e21f82008-10-27 23:50:15 -070055#define CONFIG_PPC4xx_EMAC
wdenkc6097192002-11-03 00:24:07 +000056#define CONFIG_MII 1 /* MII PHY management */
wdenkc837dcb2004-01-20 23:12:12 +000057#define CONFIG_PHY_ADDR 0 /* PHY address */
stroesea20b27a2004-12-16 18:05:42 +000058#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
Ben Warren18cc7af2009-04-28 16:50:53 -070059#define CONFIG_NET_MULTI
wdenkc6097192002-11-03 00:24:07 +000060
Jon Loeligere18a1062007-07-08 14:21:43 -050061
62/*
Jon Loeliger659e2f62007-07-10 09:10:49 -050063 * BOOTP options
64 */
65#define CONFIG_BOOTP_BOOTFILESIZE
66#define CONFIG_BOOTP_BOOTPATH
67#define CONFIG_BOOTP_GATEWAY
68#define CONFIG_BOOTP_HOSTNAME
69
70
71/*
Jon Loeligere18a1062007-07-08 14:21:43 -050072 * Command line configuration.
73 */
74#include <config_cmd_default.h>
75
76#define CONFIG_CMD_PCI
77#define CONFIG_CMD_IRQ
78#define CONFIG_CMD_ASKENV
79#define CONFIG_CMD_ELF
80#define CONFIG_CMD_BSP
81#define CONFIG_CMD_EEPROM
82
wdenkc6097192002-11-03 00:24:07 +000083
84#define CONFIG_MAC_PARTITION
85#define CONFIG_DOS_PARTITION
86
wdenkc837dcb2004-01-20 23:12:12 +000087#undef CONFIG_WATCHDOG /* watchdog disabled */
wdenkc6097192002-11-03 00:24:07 +000088
wdenkc837dcb2004-01-20 23:12:12 +000089#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
wdenkc6097192002-11-03 00:24:07 +000090
91/*
92 * Miscellaneous configurable options
93 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020094#define CONFIG_SYS_LONGHELP /* undef to save memory */
95#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeligere18a1062007-07-08 14:21:43 -050096#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020097#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenkc6097192002-11-03 00:24:07 +000098#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenkc6097192002-11-03 00:24:07 +0000100#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200101#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
102#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
103#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenkc6097192002-11-03 00:24:07 +0000104
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200105#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
wdenkc6097192002-11-03 00:24:07 +0000106
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200107#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
108#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenkc6097192002-11-03 00:24:07 +0000109
Stefan Roese550650d2010-09-20 16:05:31 +0200110#define CONFIG_CONS_INDEX 1 /* Use UART0 */
111#define CONFIG_SYS_NS16550
112#define CONFIG_SYS_NS16550_SERIAL
113#define CONFIG_SYS_NS16550_REG_SIZE 1
114#define CONFIG_SYS_NS16550_CLK get_serial_clock()
115
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200116#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200117#define CONFIG_SYS_BASE_BAUD 691200
wdenkc6097192002-11-03 00:24:07 +0000118
119/* The following table includes the supported baudrates */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200120#define CONFIG_SYS_BAUDRATE_TABLE \
wdenk8bde7f72003-06-27 21:31:46 +0000121 { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
122 57600, 115200, 230400, 460800, 921600 }
wdenkc6097192002-11-03 00:24:07 +0000123
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
125#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
wdenkc6097192002-11-03 00:24:07 +0000126
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200127#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkc6097192002-11-03 00:24:07 +0000128
129#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
130
131/*-----------------------------------------------------------------------
132 * PCI stuff
133 *-----------------------------------------------------------------------
134 */
wdenkc837dcb2004-01-20 23:12:12 +0000135#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
136#define PCI_HOST_FORCE 1 /* configure as pci host */
137#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
wdenkc6097192002-11-03 00:24:07 +0000138
wdenkc837dcb2004-01-20 23:12:12 +0000139#define CONFIG_PCI /* include pci support */
140#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
141#define CONFIG_PCI_PNP /* do pci plug-and-play */
142 /* resource configuration */
wdenkc6097192002-11-03 00:24:07 +0000143
wdenkc837dcb2004-01-20 23:12:12 +0000144#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
wdenkc6097192002-11-03 00:24:07 +0000145
stroesea20b27a2004-12-16 18:05:42 +0000146#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/
stroesead10dd92003-02-14 11:21:23 +0000147
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200148#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
149#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0410 /* PCI Device ID: OCRTC */
150#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
151#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
152#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
153#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
154#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */
155#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
156#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
wdenkc6097192002-11-03 00:24:07 +0000157
158/*-----------------------------------------------------------------------
159 * Start addresses for the final memory configuration
160 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200161 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenkc6097192002-11-03 00:24:07 +0000162 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200163#define CONFIG_SYS_SDRAM_BASE 0x00000000
164#define CONFIG_SYS_FLASH_BASE 0xFFFD0000
165#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
166#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
167#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
wdenkc6097192002-11-03 00:24:07 +0000168
169/*
170 * For booting Linux, the board info and command line data
171 * have to be in the first 8 MB of memory, since this is
172 * the maximum mapped by the Linux kernel during initialization.
173 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200174#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkc6097192002-11-03 00:24:07 +0000175/*-----------------------------------------------------------------------
176 * FLASH organization
177 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200178#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
179#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
wdenkc6097192002-11-03 00:24:07 +0000180
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200181#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
182#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenkc6097192002-11-03 00:24:07 +0000183
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200184#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
185#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
186#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
wdenkc6097192002-11-03 00:24:07 +0000187/*
188 * The following defines are added for buggy IOP480 byte interface.
189 * All other boards should use the standard values (CPCI405 etc.)
190 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200191#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
192#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
193#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
wdenkc6097192002-11-03 00:24:07 +0000194
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200195#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
wdenkc6097192002-11-03 00:24:07 +0000196
197#if 0 /* Use NVRAM for environment variables */
198/*-----------------------------------------------------------------------
199 * NVRAM organization
200 */
Jean-Christophe PLAGNIOL-VILLARD9314cee2008-09-10 22:47:59 +0200201#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200202#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
203#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200204#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */
205#define CONFIG_ENV_ADDR \
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200206 (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
207#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */
wdenkc6097192002-11-03 00:24:07 +0000208
209#else /* Use EEPROM for environment variables */
210
Jean-Christophe PLAGNIOL-VILLARDbb1f8b42008-09-05 09:19:30 +0200211#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200212#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
213#define CONFIG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */
wdenk8bde7f72003-06-27 21:31:46 +0000214 /* total size of a CAT24WC08 is 1024 bytes */
wdenkc6097192002-11-03 00:24:07 +0000215#endif
216
217/*-----------------------------------------------------------------------
218 * I2C EEPROM (CAT24WC08) for environment
219 */
220#define CONFIG_HARD_I2C /* I2c with hardware support */
Stefan Roesed0b0dca2010-04-01 14:37:24 +0200221#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200222#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
223#define CONFIG_SYS_I2C_SLAVE 0x7F
wdenkc6097192002-11-03 00:24:07 +0000224
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200225#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
226#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
wdenkc837dcb2004-01-20 23:12:12 +0000227/* mask of address bits that overflow into the "EEPROM chip address" */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200228#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
229#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
wdenkc6097192002-11-03 00:24:07 +0000230 /* 16 byte page write mode using*/
wdenkc837dcb2004-01-20 23:12:12 +0000231 /* last 4 bits of the address */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200232#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
wdenkc6097192002-11-03 00:24:07 +0000233
wdenkc6097192002-11-03 00:24:07 +0000234/*
235 * Init Memory Controller:
236 *
237 * BR0/1 and OR0/1 (FLASH)
238 */
239
240#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
241#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
242
243/*-----------------------------------------------------------------------
244 * External Bus Controller (EBC) Setup
245 */
246
wdenkc837dcb2004-01-20 23:12:12 +0000247/* Memory Bank 0 (Flash Bank 0) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200248#define CONFIG_SYS_EBC_PB0AP 0x92015480
249#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
wdenkc6097192002-11-03 00:24:07 +0000250
wdenkc837dcb2004-01-20 23:12:12 +0000251/* Memory Bank 1 (Flash Bank 1) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200252#define CONFIG_SYS_EBC_PB1AP 0x92015480
253#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
wdenkc6097192002-11-03 00:24:07 +0000254
wdenkc837dcb2004-01-20 23:12:12 +0000255/* Memory Bank 2 (PLD - FPGA-boot) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200256#define CONFIG_SYS_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
wdenk8bde7f72003-06-27 21:31:46 +0000257 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200258#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
wdenkc6097192002-11-03 00:24:07 +0000259
wdenkc837dcb2004-01-20 23:12:12 +0000260/* Memory Bank 3 (PLD - OSL) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200261#define CONFIG_SYS_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
wdenk8bde7f72003-06-27 21:31:46 +0000262 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200263#define CONFIG_SYS_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
wdenkc6097192002-11-03 00:24:07 +0000264
wdenkc837dcb2004-01-20 23:12:12 +0000265/* Memory Bank 4 (Spartan2 1) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200266#define CONFIG_SYS_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
wdenk8bde7f72003-06-27 21:31:46 +0000267 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200268#define CONFIG_SYS_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
wdenkc6097192002-11-03 00:24:07 +0000269
wdenkc837dcb2004-01-20 23:12:12 +0000270/* Memory Bank 5 (Spartan2 2) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200271#define CONFIG_SYS_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
wdenk8bde7f72003-06-27 21:31:46 +0000272 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
wdenkc6097192002-11-03 00:24:07 +0000274
wdenkc837dcb2004-01-20 23:12:12 +0000275/* Memory Bank 6 (Virtex 1) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200276#define CONFIG_SYS_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
wdenk8bde7f72003-06-27 21:31:46 +0000277 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200278#define CONFIG_SYS_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
wdenkc6097192002-11-03 00:24:07 +0000279
wdenkc837dcb2004-01-20 23:12:12 +0000280/* Memory Bank 7 (Virtex 2) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200281#define CONFIG_SYS_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
wdenk8bde7f72003-06-27 21:31:46 +0000282 /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200283#define CONFIG_SYS_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
wdenkc6097192002-11-03 00:24:07 +0000284
285
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200286#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
wdenkc6097192002-11-03 00:24:07 +0000287
288/*-----------------------------------------------------------------------
289 * Definitions for initial stack pointer and data area (in DPRAM)
290 */
291
292/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200293#define CONFIG_SYS_TEMP_STACK_OCM 1
wdenkc6097192002-11-03 00:24:07 +0000294
295/* On Chip Memory location */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200296#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
297#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
wdenkc6097192002-11-03 00:24:07 +0000298
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200299#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
Wolfgang Denk553f0982010-10-26 13:32:32 +0200300#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200301#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200302#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenkc6097192002-11-03 00:24:07 +0000303
wdenkc6097192002-11-03 00:24:07 +0000304#endif /* __CONFIG_H */