Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Marvell PHY drivers |
| 3 | * |
Wolfgang Denk | 1a45966 | 2013-07-08 09:37:19 +0200 | [diff] [blame] | 4 | * SPDX-License-Identifier: GPL-2.0+ |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 5 | * |
| 6 | * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| 7 | * author Andy Fleming |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 8 | */ |
| 9 | #include <config.h> |
| 10 | #include <common.h> |
| 11 | #include <phy.h> |
| 12 | |
| 13 | #define PHY_AUTONEGOTIATE_TIMEOUT 5000 |
| 14 | |
| 15 | /* 88E1011 PHY Status Register */ |
| 16 | #define MIIM_88E1xxx_PHY_STATUS 0x11 |
| 17 | #define MIIM_88E1xxx_PHYSTAT_SPEED 0xc000 |
| 18 | #define MIIM_88E1xxx_PHYSTAT_GBIT 0x8000 |
| 19 | #define MIIM_88E1xxx_PHYSTAT_100 0x4000 |
| 20 | #define MIIM_88E1xxx_PHYSTAT_DUPLEX 0x2000 |
| 21 | #define MIIM_88E1xxx_PHYSTAT_SPDDONE 0x0800 |
| 22 | #define MIIM_88E1xxx_PHYSTAT_LINK 0x0400 |
| 23 | |
| 24 | #define MIIM_88E1xxx_PHY_SCR 0x10 |
| 25 | #define MIIM_88E1xxx_PHY_MDI_X_AUTO 0x0060 |
| 26 | |
| 27 | /* 88E1111 PHY LED Control Register */ |
| 28 | #define MIIM_88E1111_PHY_LED_CONTROL 24 |
| 29 | #define MIIM_88E1111_PHY_LED_DIRECT 0x4100 |
| 30 | #define MIIM_88E1111_PHY_LED_COMBINE 0x411C |
| 31 | |
Zang Roy-R61911 | fa12a08 | 2011-10-27 18:52:09 +0000 | [diff] [blame] | 32 | /* 88E1111 Extended PHY Specific Control Register */ |
| 33 | #define MIIM_88E1111_PHY_EXT_CR 0x14 |
| 34 | #define MIIM_88E1111_RX_DELAY 0x80 |
| 35 | #define MIIM_88E1111_TX_DELAY 0x2 |
| 36 | |
| 37 | /* 88E1111 Extended PHY Specific Status Register */ |
| 38 | #define MIIM_88E1111_PHY_EXT_SR 0x1b |
| 39 | #define MIIM_88E1111_HWCFG_MODE_MASK 0xf |
| 40 | #define MIIM_88E1111_HWCFG_MODE_COPPER_RGMII 0xb |
| 41 | #define MIIM_88E1111_HWCFG_MODE_FIBER_RGMII 0x3 |
| 42 | #define MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK 0x4 |
| 43 | #define MIIM_88E1111_HWCFG_MODE_COPPER_RTBI 0x9 |
| 44 | #define MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO 0x8000 |
| 45 | #define MIIM_88E1111_HWCFG_FIBER_COPPER_RES 0x2000 |
| 46 | |
| 47 | #define MIIM_88E1111_COPPER 0 |
| 48 | #define MIIM_88E1111_FIBER 1 |
| 49 | |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 50 | /* 88E1118 PHY defines */ |
| 51 | #define MIIM_88E1118_PHY_PAGE 22 |
| 52 | #define MIIM_88E1118_PHY_LED_PAGE 3 |
| 53 | |
| 54 | /* 88E1121 PHY LED Control Register */ |
| 55 | #define MIIM_88E1121_PHY_LED_CTRL 16 |
| 56 | #define MIIM_88E1121_PHY_LED_PAGE 3 |
| 57 | #define MIIM_88E1121_PHY_LED_DEF 0x0030 |
| 58 | |
| 59 | /* 88E1121 PHY IRQ Enable/Status Register */ |
| 60 | #define MIIM_88E1121_PHY_IRQ_EN 18 |
| 61 | #define MIIM_88E1121_PHY_IRQ_STATUS 19 |
| 62 | |
| 63 | #define MIIM_88E1121_PHY_PAGE 22 |
| 64 | |
| 65 | /* 88E1145 Extended PHY Specific Control Register */ |
| 66 | #define MIIM_88E1145_PHY_EXT_CR 20 |
| 67 | #define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 |
| 68 | #define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 |
| 69 | |
| 70 | #define MIIM_88E1145_PHY_LED_CONTROL 24 |
| 71 | #define MIIM_88E1145_PHY_LED_DIRECT 0x4100 |
| 72 | |
| 73 | #define MIIM_88E1145_PHY_PAGE 29 |
| 74 | #define MIIM_88E1145_PHY_CAL_OV 30 |
| 75 | |
| 76 | #define MIIM_88E1149_PHY_PAGE 29 |
| 77 | |
Sebastian Hesselbarth | aeceec0 | 2012-12-04 09:31:59 +0100 | [diff] [blame] | 78 | /* 88E1310 PHY defines */ |
| 79 | #define MIIM_88E1310_PHY_LED_CTRL 16 |
| 80 | #define MIIM_88E1310_PHY_IRQ_EN 18 |
| 81 | #define MIIM_88E1310_PHY_RGMII_CTRL 21 |
| 82 | #define MIIM_88E1310_PHY_PAGE 22 |
| 83 | |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 84 | /* Marvell 88E1011S */ |
| 85 | static int m88e1011s_config(struct phy_device *phydev) |
| 86 | { |
| 87 | /* Reset and configure the PHY */ |
| 88 | phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| 89 | |
| 90 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); |
| 91 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); |
| 92 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); |
| 93 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0); |
| 94 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); |
| 95 | |
| 96 | phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| 97 | |
| 98 | genphy_config_aneg(phydev); |
| 99 | |
| 100 | return 0; |
| 101 | } |
| 102 | |
| 103 | /* Parse the 88E1011's status register for speed and duplex |
| 104 | * information |
| 105 | */ |
| 106 | static uint m88e1xxx_parse_status(struct phy_device *phydev) |
| 107 | { |
| 108 | unsigned int speed; |
| 109 | unsigned int mii_reg; |
| 110 | |
| 111 | mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_STATUS); |
| 112 | |
| 113 | if ((mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) && |
| 114 | !(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { |
| 115 | int i = 0; |
| 116 | |
| 117 | puts("Waiting for PHY realtime link"); |
| 118 | while (!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { |
| 119 | /* Timeout reached ? */ |
| 120 | if (i > PHY_AUTONEGOTIATE_TIMEOUT) { |
| 121 | puts(" TIMEOUT !\n"); |
| 122 | phydev->link = 0; |
| 123 | break; |
| 124 | } |
| 125 | |
| 126 | if ((i++ % 1000) == 0) |
| 127 | putc('.'); |
| 128 | udelay(1000); |
| 129 | mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| 130 | MIIM_88E1xxx_PHY_STATUS); |
| 131 | } |
| 132 | puts(" done\n"); |
| 133 | udelay(500000); /* another 500 ms (results in faster booting) */ |
| 134 | } else { |
| 135 | if (mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) |
| 136 | phydev->link = 1; |
| 137 | else |
| 138 | phydev->link = 0; |
| 139 | } |
| 140 | |
| 141 | if (mii_reg & MIIM_88E1xxx_PHYSTAT_DUPLEX) |
| 142 | phydev->duplex = DUPLEX_FULL; |
| 143 | else |
| 144 | phydev->duplex = DUPLEX_HALF; |
| 145 | |
| 146 | speed = mii_reg & MIIM_88E1xxx_PHYSTAT_SPEED; |
| 147 | |
| 148 | switch (speed) { |
| 149 | case MIIM_88E1xxx_PHYSTAT_GBIT: |
| 150 | phydev->speed = SPEED_1000; |
| 151 | break; |
| 152 | case MIIM_88E1xxx_PHYSTAT_100: |
| 153 | phydev->speed = SPEED_100; |
| 154 | break; |
| 155 | default: |
| 156 | phydev->speed = SPEED_10; |
| 157 | break; |
| 158 | } |
| 159 | |
| 160 | return 0; |
| 161 | } |
| 162 | |
| 163 | static int m88e1011s_startup(struct phy_device *phydev) |
| 164 | { |
| 165 | genphy_update_link(phydev); |
| 166 | m88e1xxx_parse_status(phydev); |
| 167 | |
| 168 | return 0; |
| 169 | } |
| 170 | |
| 171 | /* Marvell 88E1111S */ |
| 172 | static int m88e1111s_config(struct phy_device *phydev) |
| 173 | { |
| 174 | int reg; |
Zang Roy-R61911 | fa12a08 | 2011-10-27 18:52:09 +0000 | [diff] [blame] | 175 | int timeout; |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 176 | |
| 177 | if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| 178 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || |
| 179 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || |
| 180 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { |
Zang Roy-R61911 | fa12a08 | 2011-10-27 18:52:09 +0000 | [diff] [blame] | 181 | reg = phy_read(phydev, |
| 182 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR); |
| 183 | if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| 184 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)) { |
| 185 | reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY); |
| 186 | } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| 187 | reg &= ~MIIM_88E1111_TX_DELAY; |
| 188 | reg |= MIIM_88E1111_RX_DELAY; |
| 189 | } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| 190 | reg &= ~MIIM_88E1111_RX_DELAY; |
| 191 | reg |= MIIM_88E1111_TX_DELAY; |
| 192 | } |
| 193 | |
| 194 | phy_write(phydev, |
| 195 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg); |
| 196 | |
| 197 | reg = phy_read(phydev, |
| 198 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR); |
| 199 | |
| 200 | reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK); |
| 201 | |
| 202 | if (reg & MIIM_88E1111_HWCFG_FIBER_COPPER_RES) |
| 203 | reg |= MIIM_88E1111_HWCFG_MODE_FIBER_RGMII; |
| 204 | else |
| 205 | reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RGMII; |
| 206 | |
| 207 | phy_write(phydev, |
| 208 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR, reg); |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 209 | } |
| 210 | |
Zang Roy-R61911 | fa12a08 | 2011-10-27 18:52:09 +0000 | [diff] [blame] | 211 | if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { |
| 212 | reg = phy_read(phydev, |
| 213 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_SR); |
| 214 | |
| 215 | reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK); |
| 216 | reg |= MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK; |
| 217 | reg |= MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| 218 | |
| 219 | phy_write(phydev, MDIO_DEVAD_NONE, |
| 220 | MIIM_88E1111_PHY_EXT_SR, reg); |
| 221 | } |
| 222 | |
| 223 | if (phydev->interface == PHY_INTERFACE_MODE_RTBI) { |
| 224 | reg = phy_read(phydev, |
| 225 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR); |
| 226 | reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY); |
| 227 | phy_write(phydev, |
| 228 | MDIO_DEVAD_NONE, MIIM_88E1111_PHY_EXT_CR, reg); |
| 229 | |
| 230 | reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| 231 | MIIM_88E1111_PHY_EXT_SR); |
| 232 | reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK | |
| 233 | MIIM_88E1111_HWCFG_FIBER_COPPER_RES); |
| 234 | reg |= 0x7 | MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| 235 | phy_write(phydev, MDIO_DEVAD_NONE, |
| 236 | MIIM_88E1111_PHY_EXT_SR, reg); |
| 237 | |
| 238 | /* soft reset */ |
| 239 | timeout = 1000; |
| 240 | phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| 241 | udelay(1000); |
| 242 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| 243 | while ((reg & BMCR_RESET) && --timeout) { |
| 244 | udelay(1000); |
| 245 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| 246 | } |
| 247 | if (!timeout) |
| 248 | printf("%s: phy soft reset timeout\n", __func__); |
| 249 | |
| 250 | reg = phy_read(phydev, MDIO_DEVAD_NONE, |
| 251 | MIIM_88E1111_PHY_EXT_SR); |
| 252 | reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK | |
| 253 | MIIM_88E1111_HWCFG_FIBER_COPPER_RES); |
| 254 | reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RTBI | |
| 255 | MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO; |
| 256 | phy_write(phydev, MDIO_DEVAD_NONE, |
| 257 | MIIM_88E1111_PHY_EXT_SR, reg); |
| 258 | } |
| 259 | |
| 260 | /* soft reset */ |
| 261 | timeout = 1000; |
| 262 | phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); |
| 263 | udelay(1000); |
| 264 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| 265 | while ((reg & BMCR_RESET) && --timeout) { |
| 266 | udelay(1000); |
| 267 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| 268 | } |
| 269 | if (!timeout) |
| 270 | printf("%s: phy soft reset timeout\n", __func__); |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 271 | |
| 272 | genphy_config_aneg(phydev); |
| 273 | |
| 274 | phy_reset(phydev); |
| 275 | |
| 276 | return 0; |
| 277 | } |
| 278 | |
Hao Zhang | 35fa0dd | 2014-10-30 18:59:43 +0200 | [diff] [blame] | 279 | /** |
| 280 | * m88e1518_phy_writebits - write bits to a register |
| 281 | */ |
| 282 | void m88e1518_phy_writebits(struct phy_device *phydev, |
| 283 | u8 reg_num, u16 offset, u16 len, u16 data) |
| 284 | { |
| 285 | u16 reg, mask; |
| 286 | |
| 287 | if ((len + offset) >= 16) |
| 288 | mask = 0 - (1 << offset); |
| 289 | else |
| 290 | mask = (1 << (len + offset)) - (1 << offset); |
| 291 | |
| 292 | reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num); |
| 293 | |
| 294 | reg &= ~mask; |
| 295 | reg |= data << offset; |
| 296 | |
| 297 | phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg); |
| 298 | } |
| 299 | |
| 300 | static int m88e1518_config(struct phy_device *phydev) |
| 301 | { |
| 302 | /* |
| 303 | * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512 |
| 304 | * /88E1514 Rev A0, Errata Section 3.1 |
| 305 | */ |
Clemens Gruber | 90a94ef | 2015-06-06 14:44:57 +0200 | [diff] [blame] | 306 | |
| 307 | /* EEE initialization */ |
| 308 | phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff); |
| 309 | phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B); |
| 310 | phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144); |
| 311 | phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28); |
| 312 | phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146); |
| 313 | phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233); |
| 314 | phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D); |
| 315 | phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C); |
| 316 | phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159); |
| 317 | phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000); |
| 318 | |
| 319 | /* SGMII-to-Copper mode initialization */ |
Hao Zhang | 35fa0dd | 2014-10-30 18:59:43 +0200 | [diff] [blame] | 320 | if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { |
Clemens Gruber | 90a94ef | 2015-06-06 14:44:57 +0200 | [diff] [blame] | 321 | /* Select page 18 */ |
| 322 | phy_write(phydev, MDIO_DEVAD_NONE, 22, 18); |
| 323 | |
| 324 | /* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */ |
Hao Zhang | 35fa0dd | 2014-10-30 18:59:43 +0200 | [diff] [blame] | 325 | m88e1518_phy_writebits(phydev, 20, 0, 3, 1); |
| 326 | |
Clemens Gruber | 90a94ef | 2015-06-06 14:44:57 +0200 | [diff] [blame] | 327 | /* PHY reset is necessary after changing MODE[2:0] */ |
Hao Zhang | 35fa0dd | 2014-10-30 18:59:43 +0200 | [diff] [blame] | 328 | m88e1518_phy_writebits(phydev, 20, 15, 1, 1); |
Clemens Gruber | 90a94ef | 2015-06-06 14:44:57 +0200 | [diff] [blame] | 329 | |
| 330 | /* Reset page selection */ |
| 331 | phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); |
| 332 | |
Hao Zhang | 35fa0dd | 2014-10-30 18:59:43 +0200 | [diff] [blame] | 333 | udelay(100); |
| 334 | } |
| 335 | |
| 336 | return m88e1111s_config(phydev); |
| 337 | } |
| 338 | |
Clemens Gruber | 8396d0a | 2015-06-06 14:44:58 +0200 | [diff] [blame] | 339 | /* Marvell 88E1510 */ |
| 340 | static int m88e1510_config(struct phy_device *phydev) |
| 341 | { |
| 342 | /* Select page 3 */ |
| 343 | phy_write(phydev, MDIO_DEVAD_NONE, 22, 3); |
| 344 | |
| 345 | /* Enable INTn output on LED[2] */ |
| 346 | m88e1518_phy_writebits(phydev, 18, 7, 1, 1); |
| 347 | |
| 348 | /* Configure LEDs */ |
| 349 | m88e1518_phy_writebits(phydev, 16, 0, 4, 3); /* LED[0]:0011 (ACT) */ |
| 350 | m88e1518_phy_writebits(phydev, 16, 4, 4, 6); /* LED[1]:0110 (LINK) */ |
| 351 | |
| 352 | /* Reset page selection */ |
| 353 | phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); |
| 354 | |
| 355 | return m88e1518_config(phydev); |
| 356 | } |
| 357 | |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 358 | /* Marvell 88E1118 */ |
| 359 | static int m88e1118_config(struct phy_device *phydev) |
| 360 | { |
| 361 | /* Change Page Number */ |
| 362 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0002); |
| 363 | /* Delay RGMII TX and RX */ |
| 364 | phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x1070); |
| 365 | /* Change Page Number */ |
| 366 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0003); |
| 367 | /* Adjust LED control */ |
| 368 | phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x021e); |
| 369 | /* Change Page Number */ |
| 370 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); |
| 371 | |
| 372 | genphy_config_aneg(phydev); |
| 373 | |
| 374 | phy_reset(phydev); |
| 375 | |
| 376 | return 0; |
| 377 | } |
| 378 | |
| 379 | static int m88e1118_startup(struct phy_device *phydev) |
| 380 | { |
| 381 | /* Change Page Number */ |
| 382 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); |
| 383 | |
| 384 | genphy_update_link(phydev); |
| 385 | m88e1xxx_parse_status(phydev); |
| 386 | |
| 387 | return 0; |
| 388 | } |
| 389 | |
| 390 | /* Marvell 88E1121R */ |
| 391 | static int m88e1121_config(struct phy_device *phydev) |
| 392 | { |
| 393 | int pg; |
| 394 | |
| 395 | /* Configure the PHY */ |
| 396 | genphy_config_aneg(phydev); |
| 397 | |
| 398 | /* Switch the page to access the led register */ |
| 399 | pg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE); |
| 400 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, |
| 401 | MIIM_88E1121_PHY_LED_PAGE); |
| 402 | /* Configure leds */ |
| 403 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_LED_CTRL, |
| 404 | MIIM_88E1121_PHY_LED_DEF); |
| 405 | /* Restore the page pointer */ |
| 406 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, pg); |
| 407 | |
| 408 | /* Disable IRQs and de-assert interrupt */ |
| 409 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_EN, 0); |
| 410 | phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_STATUS); |
| 411 | |
| 412 | return 0; |
| 413 | } |
| 414 | |
| 415 | /* Marvell 88E1145 */ |
| 416 | static int m88e1145_config(struct phy_device *phydev) |
| 417 | { |
| 418 | int reg; |
| 419 | |
| 420 | /* Errata E0, E1 */ |
| 421 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x001b); |
| 422 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0x418f); |
| 423 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x0016); |
| 424 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0xa2da); |
| 425 | |
| 426 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_SCR, |
| 427 | MIIM_88E1xxx_PHY_MDI_X_AUTO); |
| 428 | |
| 429 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR); |
| 430 | if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) |
| 431 | reg |= MIIM_M88E1145_RGMII_RX_DELAY | |
| 432 | MIIM_M88E1145_RGMII_TX_DELAY; |
| 433 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg); |
| 434 | |
| 435 | genphy_config_aneg(phydev); |
| 436 | |
| 437 | phy_reset(phydev); |
| 438 | |
| 439 | return 0; |
| 440 | } |
| 441 | |
| 442 | static int m88e1145_startup(struct phy_device *phydev) |
| 443 | { |
| 444 | genphy_update_link(phydev); |
| 445 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL, |
| 446 | MIIM_88E1145_PHY_LED_DIRECT); |
| 447 | m88e1xxx_parse_status(phydev); |
| 448 | |
| 449 | return 0; |
| 450 | } |
| 451 | |
| 452 | /* Marvell 88E1149S */ |
| 453 | static int m88e1149_config(struct phy_device *phydev) |
| 454 | { |
| 455 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x1f); |
| 456 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); |
| 457 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x5); |
| 458 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0); |
| 459 | phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); |
| 460 | |
| 461 | genphy_config_aneg(phydev); |
| 462 | |
| 463 | phy_reset(phydev); |
| 464 | |
| 465 | return 0; |
| 466 | } |
| 467 | |
Sebastian Hesselbarth | aeceec0 | 2012-12-04 09:31:59 +0100 | [diff] [blame] | 468 | /* Marvell 88E1310 */ |
| 469 | static int m88e1310_config(struct phy_device *phydev) |
| 470 | { |
| 471 | u16 reg; |
| 472 | |
| 473 | /* LED link and activity */ |
| 474 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0003); |
| 475 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_LED_CTRL); |
| 476 | reg = (reg & ~0xf) | 0x1; |
| 477 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_LED_CTRL, reg); |
| 478 | |
| 479 | /* Set LED2/INT to INT mode, low active */ |
| 480 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0003); |
| 481 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_IRQ_EN); |
| 482 | reg = (reg & 0x77ff) | 0x0880; |
| 483 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_IRQ_EN, reg); |
| 484 | |
| 485 | /* Set RGMII delay */ |
| 486 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0002); |
| 487 | reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_RGMII_CTRL); |
| 488 | reg |= 0x0030; |
| 489 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_RGMII_CTRL, reg); |
| 490 | |
| 491 | /* Ensure to return to page 0 */ |
| 492 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0000); |
| 493 | |
| 494 | genphy_config_aneg(phydev); |
| 495 | phy_reset(phydev); |
| 496 | |
| 497 | return 0; |
| 498 | } |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 499 | |
| 500 | static struct phy_driver M88E1011S_driver = { |
| 501 | .name = "Marvell 88E1011S", |
| 502 | .uid = 0x1410c60, |
| 503 | .mask = 0xffffff0, |
| 504 | .features = PHY_GBIT_FEATURES, |
| 505 | .config = &m88e1011s_config, |
| 506 | .startup = &m88e1011s_startup, |
| 507 | .shutdown = &genphy_shutdown, |
| 508 | }; |
| 509 | |
| 510 | static struct phy_driver M88E1111S_driver = { |
| 511 | .name = "Marvell 88E1111S", |
| 512 | .uid = 0x1410cc0, |
| 513 | .mask = 0xffffff0, |
| 514 | .features = PHY_GBIT_FEATURES, |
| 515 | .config = &m88e1111s_config, |
| 516 | .startup = &m88e1011s_startup, |
| 517 | .shutdown = &genphy_shutdown, |
| 518 | }; |
| 519 | |
| 520 | static struct phy_driver M88E1118_driver = { |
| 521 | .name = "Marvell 88E1118", |
| 522 | .uid = 0x1410e10, |
| 523 | .mask = 0xffffff0, |
| 524 | .features = PHY_GBIT_FEATURES, |
| 525 | .config = &m88e1118_config, |
| 526 | .startup = &m88e1118_startup, |
| 527 | .shutdown = &genphy_shutdown, |
| 528 | }; |
| 529 | |
Michal Simek | b4b81e8 | 2012-08-07 02:23:07 +0000 | [diff] [blame] | 530 | static struct phy_driver M88E1118R_driver = { |
| 531 | .name = "Marvell 88E1118R", |
| 532 | .uid = 0x1410e40, |
| 533 | .mask = 0xffffff0, |
| 534 | .features = PHY_GBIT_FEATURES, |
| 535 | .config = &m88e1118_config, |
| 536 | .startup = &m88e1118_startup, |
| 537 | .shutdown = &genphy_shutdown, |
| 538 | }; |
| 539 | |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 540 | static struct phy_driver M88E1121R_driver = { |
| 541 | .name = "Marvell 88E1121R", |
| 542 | .uid = 0x1410cb0, |
| 543 | .mask = 0xffffff0, |
| 544 | .features = PHY_GBIT_FEATURES, |
| 545 | .config = &m88e1121_config, |
| 546 | .startup = &genphy_startup, |
| 547 | .shutdown = &genphy_shutdown, |
| 548 | }; |
| 549 | |
| 550 | static struct phy_driver M88E1145_driver = { |
| 551 | .name = "Marvell 88E1145", |
| 552 | .uid = 0x1410cd0, |
| 553 | .mask = 0xffffff0, |
| 554 | .features = PHY_GBIT_FEATURES, |
| 555 | .config = &m88e1145_config, |
| 556 | .startup = &m88e1145_startup, |
| 557 | .shutdown = &genphy_shutdown, |
| 558 | }; |
| 559 | |
| 560 | static struct phy_driver M88E1149S_driver = { |
| 561 | .name = "Marvell 88E1149S", |
| 562 | .uid = 0x1410ca0, |
| 563 | .mask = 0xffffff0, |
| 564 | .features = PHY_GBIT_FEATURES, |
| 565 | .config = &m88e1149_config, |
| 566 | .startup = &m88e1011s_startup, |
| 567 | .shutdown = &genphy_shutdown, |
| 568 | }; |
| 569 | |
Clemens Gruber | 8396d0a | 2015-06-06 14:44:58 +0200 | [diff] [blame] | 570 | static struct phy_driver M88E1510_driver = { |
| 571 | .name = "Marvell 88E1510", |
| 572 | .uid = 0x1410dd0, |
| 573 | .mask = 0xffffff0, |
| 574 | .features = PHY_GBIT_FEATURES, |
| 575 | .config = &m88e1510_config, |
| 576 | .startup = &m88e1011s_startup, |
| 577 | .shutdown = &genphy_shutdown, |
| 578 | }; |
| 579 | |
Michal Simek | 1415107 | 2012-10-15 14:03:00 +0200 | [diff] [blame] | 580 | static struct phy_driver M88E1518_driver = { |
| 581 | .name = "Marvell 88E1518", |
| 582 | .uid = 0x1410dd1, |
| 583 | .mask = 0xffffff0, |
| 584 | .features = PHY_GBIT_FEATURES, |
Hao Zhang | 35fa0dd | 2014-10-30 18:59:43 +0200 | [diff] [blame] | 585 | .config = &m88e1518_config, |
Michal Simek | 1415107 | 2012-10-15 14:03:00 +0200 | [diff] [blame] | 586 | .startup = &m88e1011s_startup, |
| 587 | .shutdown = &genphy_shutdown, |
| 588 | }; |
| 589 | |
Sebastian Hesselbarth | aeceec0 | 2012-12-04 09:31:59 +0100 | [diff] [blame] | 590 | static struct phy_driver M88E1310_driver = { |
| 591 | .name = "Marvell 88E1310", |
| 592 | .uid = 0x01410e90, |
| 593 | .mask = 0xffffff0, |
| 594 | .features = PHY_GBIT_FEATURES, |
| 595 | .config = &m88e1310_config, |
| 596 | .startup = &m88e1011s_startup, |
| 597 | .shutdown = &genphy_shutdown, |
| 598 | }; |
| 599 | |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 600 | int phy_marvell_init(void) |
| 601 | { |
Sebastian Hesselbarth | aeceec0 | 2012-12-04 09:31:59 +0100 | [diff] [blame] | 602 | phy_register(&M88E1310_driver); |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 603 | phy_register(&M88E1149S_driver); |
| 604 | phy_register(&M88E1145_driver); |
| 605 | phy_register(&M88E1121R_driver); |
| 606 | phy_register(&M88E1118_driver); |
Michal Simek | b4b81e8 | 2012-08-07 02:23:07 +0000 | [diff] [blame] | 607 | phy_register(&M88E1118R_driver); |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 608 | phy_register(&M88E1111S_driver); |
| 609 | phy_register(&M88E1011S_driver); |
Clemens Gruber | 8396d0a | 2015-06-06 14:44:58 +0200 | [diff] [blame] | 610 | phy_register(&M88E1510_driver); |
Michal Simek | 1415107 | 2012-10-15 14:03:00 +0200 | [diff] [blame] | 611 | phy_register(&M88E1518_driver); |
Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame] | 612 | |
| 613 | return 0; |
| 614 | } |