Aubrey Li | 26bf7de | 2007-03-19 01:24:52 +0800 | [diff] [blame] | 1 | /* |
| 2 | * ADI Blackfin 537 MAC Ethernet |
| 3 | * |
| 4 | * Copyright (c) 2005 Analog Device, Inc. |
| 5 | * |
| 6 | * See file CREDITS for list of people who contributed to this |
| 7 | * project. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of |
| 12 | * the License, or (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 22 | * MA 02111-1307 USA |
| 23 | */ |
| 24 | |
| 25 | #include <common.h> |
| 26 | #include <config.h> |
| 27 | #include <asm/blackfin.h> |
| 28 | #include <net.h> |
| 29 | #include <command.h> |
| 30 | #include <malloc.h> |
| 31 | #include "ether_bf537.h" |
| 32 | |
| 33 | #ifdef CONFIG_POST |
| 34 | #include <post.h> |
| 35 | #endif |
| 36 | |
| 37 | #undef DEBUG_ETHERNET |
| 38 | |
| 39 | #ifdef DEBUG_ETHERNET |
| 40 | #define DEBUGF(fmt,args...) printf(fmt,##args) |
| 41 | #else |
| 42 | #define DEBUGF(fmt,args...) |
| 43 | #endif |
| 44 | |
| 45 | #if (CONFIG_COMMANDS & CFG_CMD_NET) |
| 46 | |
| 47 | #define RXBUF_BASE_ADDR 0xFF900000 |
| 48 | #define TXBUF_BASE_ADDR 0xFF800000 |
| 49 | #define TX_BUF_CNT 1 |
| 50 | |
Wolfgang Denk | 1636d1c | 2007-06-22 23:59:00 +0200 | [diff] [blame^] | 51 | #define TOUT_LOOP 1000000 |
Aubrey Li | 26bf7de | 2007-03-19 01:24:52 +0800 | [diff] [blame] | 52 | |
| 53 | ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT]; |
| 54 | ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX]; |
| 55 | static u16 txIdx; /* index of the current RX buffer */ |
| 56 | static u16 rxIdx; /* index of the current TX buffer */ |
| 57 | |
| 58 | u8 SrcAddr[6]; |
| 59 | u16 PHYregs[NO_PHY_REGS]; /* u16 PHYADDR; */ |
| 60 | |
| 61 | /* DMAx_CONFIG values at DMA Restart */ |
| 62 | const ADI_DMA_CONFIG_REG rxdmacfg = { 1, 1, 2, 0, 0, 0, 0, 5, 7 }; |
| 63 | |
| 64 | #if 0 |
| 65 | rxdmacfg.b_DMA_EN = 1; /* enabled */ |
| 66 | rxdmacfg.b_WNR = 1; /* write to memory */ |
| 67 | rxdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| 68 | rxdmacfg.b_DMA2D = 0; /* N/A */ |
| 69 | rxdmacfg.b_RESTART= 0; /* N/A */ |
| 70 | rxdmacfg.b_DI_SEL = 0; /* N/A */ |
| 71 | rxdmacfg.b_DI_EN = 0; /* no interrupt */ |
| 72 | rxdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */ |
| 73 | rxdmacfg.b_FLOW = 7; /* large desc flow */ |
| 74 | #endif |
| 75 | |
| 76 | const ADI_DMA_CONFIG_REG txdmacfg = { 1, 0, 2, 0, 0, 0, 0, 5, 7 }; |
| 77 | |
| 78 | #if 0 |
| 79 | txdmacfg.b_DMA_EN = 1; /* enabled */ |
| 80 | txdmacfg.b_WNR = 0; /* read from memory */ |
| 81 | txdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| 82 | txdmacfg.b_DMA2D = 0; /* N/A */ |
| 83 | txdmacfg.b_RESTART= 0; /* N/A */ |
| 84 | txdmacfg.b_DI_SEL = 0; /* N/A */ |
| 85 | txdmacfg.b_DI_EN = 0; /* no interrupt */ |
| 86 | txdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */ |
| 87 | txdmacfg.b_FLOW = 7; /* large desc flow */ |
| 88 | #endif |
| 89 | |
| 90 | ADI_ETHER_BUFFER *SetupRxBuffer(int no); |
| 91 | ADI_ETHER_BUFFER *SetupTxBuffer(int no); |
| 92 | |
| 93 | static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd); |
| 94 | static void bfin_EMAC_halt(struct eth_device *dev); |
| 95 | static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, |
| 96 | int length); |
| 97 | static int bfin_EMAC_recv(struct eth_device *dev); |
| 98 | |
| 99 | int bfin_EMAC_initialize(bd_t * bis) |
| 100 | { |
| 101 | struct eth_device *dev; |
| 102 | dev = (struct eth_device *)malloc(sizeof(*dev)); |
| 103 | if (dev == NULL) |
| 104 | hang(); |
| 105 | |
| 106 | memset(dev, 0, sizeof(*dev)); |
| 107 | sprintf(dev->name, "BF537 ETHERNET"); |
| 108 | |
| 109 | dev->iobase = 0; |
| 110 | dev->priv = 0; |
| 111 | dev->init = bfin_EMAC_init; |
| 112 | dev->halt = bfin_EMAC_halt; |
| 113 | dev->send = bfin_EMAC_send; |
| 114 | dev->recv = bfin_EMAC_recv; |
| 115 | |
| 116 | eth_register(dev); |
| 117 | |
| 118 | return 1; |
| 119 | } |
| 120 | |
| 121 | static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, |
| 122 | int length) |
| 123 | { |
| 124 | int i; |
| 125 | int result = 0; |
| 126 | unsigned int *buf; |
| 127 | buf = (unsigned int *)packet; |
| 128 | |
| 129 | if (length <= 0) { |
| 130 | printf("Ethernet: bad packet size: %d\n", length); |
| 131 | goto out; |
| 132 | } |
| 133 | |
| 134 | if ((*pDMA2_IRQ_STATUS & DMA_ERR) != 0) { |
| 135 | printf("Ethernet: tx DMA error\n"); |
| 136 | goto out; |
| 137 | } |
| 138 | |
| 139 | for (i = 0; (*pDMA2_IRQ_STATUS & DMA_RUN) != 0; i++) { |
| 140 | if (i > TOUT_LOOP) { |
| 141 | puts("Ethernet: tx time out\n"); |
| 142 | goto out; |
| 143 | } |
| 144 | } |
| 145 | txbuf[txIdx]->FrmData->NoBytes = length; |
| 146 | memcpy(txbuf[txIdx]->FrmData->Dest, (void *)packet, length); |
| 147 | txbuf[txIdx]->Dma[0].START_ADDR = (u32) txbuf[txIdx]->FrmData; |
| 148 | *pDMA2_NEXT_DESC_PTR = &txbuf[txIdx]->Dma[0]; |
| 149 | *pDMA2_CONFIG = *(u16 *) (void *)(&txdmacfg); |
| 150 | *pEMAC_OPMODE |= TE; |
| 151 | |
| 152 | for (i = 0; (txbuf[txIdx]->StatusWord & TX_COMP) == 0; i++) { |
| 153 | if (i > TOUT_LOOP) { |
| 154 | puts("Ethernet: tx error\n"); |
| 155 | goto out; |
| 156 | } |
| 157 | } |
| 158 | result = txbuf[txIdx]->StatusWord; |
| 159 | txbuf[txIdx]->StatusWord = 0; |
| 160 | if ((txIdx + 1) >= TX_BUF_CNT) |
| 161 | txIdx = 0; |
| 162 | else |
| 163 | txIdx++; |
| 164 | out: |
| 165 | DEBUGF("BFIN EMAC send: length = %d\n", length); |
| 166 | return result; |
| 167 | } |
| 168 | |
| 169 | static int bfin_EMAC_recv(struct eth_device *dev) |
| 170 | { |
| 171 | int length = 0; |
| 172 | |
| 173 | for (;;) { |
| 174 | if ((rxbuf[rxIdx]->StatusWord & RX_COMP) == 0) { |
| 175 | length = -1; |
| 176 | break; |
| 177 | } |
| 178 | if ((rxbuf[rxIdx]->StatusWord & RX_DMAO) != 0) { |
| 179 | printf("Ethernet: rx dma overrun\n"); |
| 180 | break; |
| 181 | } |
| 182 | if ((rxbuf[rxIdx]->StatusWord & RX_OK) == 0) { |
| 183 | printf("Ethernet: rx error\n"); |
| 184 | break; |
| 185 | } |
| 186 | length = rxbuf[rxIdx]->StatusWord & 0x000007FF; |
| 187 | if (length <= 4) { |
| 188 | printf("Ethernet: bad frame\n"); |
| 189 | break; |
| 190 | } |
| 191 | NetRxPackets[rxIdx] = |
| 192 | (volatile uchar *)(rxbuf[rxIdx]->FrmData->Dest); |
| 193 | NetReceive(NetRxPackets[rxIdx], length - 4); |
| 194 | *pDMA1_IRQ_STATUS |= DMA_DONE | DMA_ERR; |
| 195 | rxbuf[rxIdx]->StatusWord = 0x00000000; |
| 196 | if ((rxIdx + 1) >= PKTBUFSRX) |
| 197 | rxIdx = 0; |
| 198 | else |
| 199 | rxIdx++; |
| 200 | } |
| 201 | |
| 202 | return length; |
| 203 | } |
| 204 | |
| 205 | /************************************************************** |
| 206 | * |
| 207 | * Ethernet Initialization Routine |
| 208 | * |
| 209 | *************************************************************/ |
| 210 | |
| 211 | static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd) |
| 212 | { |
| 213 | u32 opmode; |
| 214 | int dat; |
| 215 | int i; |
| 216 | DEBUGF("Eth_init: ......\n"); |
| 217 | |
| 218 | txIdx = 0; |
| 219 | rxIdx = 0; |
| 220 | |
| 221 | /* Initialize System Register */ |
| 222 | if (SetupSystemRegs(&dat) < 0) |
| 223 | return -1; |
| 224 | |
| 225 | /* Initialize EMAC address */ |
| 226 | SetupMacAddr(SrcAddr); |
| 227 | |
| 228 | /* Initialize TX and RX buffer */ |
| 229 | for (i = 0; i < PKTBUFSRX; i++) { |
| 230 | rxbuf[i] = SetupRxBuffer(i); |
| 231 | if (i > 0) { |
| 232 | rxbuf[i - 1]->Dma[1].NEXT_DESC_PTR = |
| 233 | &(rxbuf[i]->Dma[0]); |
| 234 | if (i == (PKTBUFSRX - 1)) |
| 235 | rxbuf[i]->Dma[1].NEXT_DESC_PTR = |
| 236 | &(rxbuf[0]->Dma[0]); |
| 237 | } |
| 238 | } |
| 239 | for (i = 0; i < TX_BUF_CNT; i++) { |
| 240 | txbuf[i] = SetupTxBuffer(i); |
| 241 | if (i > 0) { |
| 242 | txbuf[i - 1]->Dma[1].NEXT_DESC_PTR = |
| 243 | &(txbuf[i]->Dma[0]); |
| 244 | if (i == (TX_BUF_CNT - 1)) |
| 245 | txbuf[i]->Dma[1].NEXT_DESC_PTR = |
| 246 | &(txbuf[0]->Dma[0]); |
| 247 | } |
| 248 | } |
| 249 | |
| 250 | /* Set RX DMA */ |
| 251 | *pDMA1_NEXT_DESC_PTR = &rxbuf[0]->Dma[0]; |
| 252 | *pDMA1_CONFIG = *((u16 *) (void *)&rxbuf[0]->Dma[0].CONFIG); |
| 253 | |
| 254 | /* Wait MII done */ |
| 255 | PollMdcDone(); |
| 256 | |
| 257 | /* We enable only RX here */ |
| 258 | /* ASTP : Enable Automatic Pad Stripping |
| 259 | PR : Promiscuous Mode for test |
| 260 | PSF : Receive frames with total length less than 64 bytes. |
| 261 | FDMODE : Full Duplex Mode |
| 262 | LB : Internal Loopback for test |
| 263 | RE : Receiver Enable */ |
| 264 | if (dat == FDMODE) |
| 265 | opmode = ASTP | FDMODE | PSF; |
| 266 | else |
| 267 | opmode = ASTP | PSF; |
| 268 | opmode |= RE; |
| 269 | #ifdef CONFIG_BFIN_MAC_RMII |
| 270 | opmode |= TE | RMII; |
| 271 | #endif |
| 272 | /* Turn on the EMAC */ |
| 273 | *pEMAC_OPMODE = opmode; |
| 274 | return 0; |
| 275 | } |
| 276 | |
| 277 | static void bfin_EMAC_halt(struct eth_device *dev) |
| 278 | { |
| 279 | DEBUGF("Eth_halt: ......\n"); |
| 280 | /* Turn off the EMAC */ |
| 281 | *pEMAC_OPMODE = 0x00000000; |
| 282 | /* Turn off the EMAC RX DMA */ |
| 283 | *pDMA1_CONFIG = 0x0000; |
| 284 | *pDMA2_CONFIG = 0x0000; |
| 285 | |
| 286 | } |
| 287 | |
| 288 | void SetupMacAddr(u8 * MACaddr) |
| 289 | { |
| 290 | char *tmp, *end; |
| 291 | int i; |
| 292 | /* this depends on a little-endian machine */ |
| 293 | tmp = getenv("ethaddr"); |
| 294 | if (tmp) { |
| 295 | for (i = 0; i < 6; i++) { |
| 296 | MACaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; |
| 297 | if (tmp) |
| 298 | tmp = (*end) ? end + 1 : end; |
| 299 | } |
| 300 | |
| 301 | #ifndef CONFIG_NETCONSOLE |
| 302 | printf("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", |
| 303 | MACaddr[0], MACaddr[1], |
| 304 | MACaddr[2], MACaddr[3], MACaddr[4], MACaddr[5]); |
| 305 | #endif |
| 306 | *pEMAC_ADDRLO = MACaddr[0] | MACaddr[1] << 8 | |
| 307 | MACaddr[2] << 16 | MACaddr[3] << 24; |
| 308 | *pEMAC_ADDRHI = MACaddr[4] | MACaddr[5] << 8; |
| 309 | } |
| 310 | } |
| 311 | |
| 312 | void PollMdcDone(void) |
| 313 | { |
| 314 | /* poll the STABUSY bit */ |
| 315 | while (*pEMAC_STAADD & STABUSY) ; |
| 316 | } |
| 317 | |
| 318 | void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data) |
| 319 | { |
| 320 | PollMdcDone(); |
| 321 | |
| 322 | *pEMAC_STADAT = Data; |
| 323 | |
| 324 | *pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) | |
| 325 | STAOP | STAIE | STABUSY; |
| 326 | } |
| 327 | |
| 328 | /********************************************************************************* |
| 329 | * Read an off-chip register in a PHY through the MDC/MDIO port * |
| 330 | *********************************************************************************/ |
| 331 | u16 RdPHYReg(u16 PHYAddr, u16 RegAddr) |
| 332 | { |
| 333 | u16 Data; |
| 334 | |
| 335 | PollMdcDone(); |
| 336 | |
| 337 | *pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) | |
| 338 | STAIE | STABUSY; |
| 339 | |
| 340 | PollMdcDone(); |
| 341 | |
| 342 | Data = (u16) * pEMAC_STADAT; |
| 343 | |
| 344 | PHYregs[RegAddr] = Data; /* save shadow copy */ |
| 345 | |
| 346 | return Data; |
| 347 | } |
| 348 | |
| 349 | void SoftResetPHY(void) |
| 350 | { |
| 351 | u16 phydat; |
| 352 | /* set the reset bit */ |
| 353 | WrPHYReg(PHYADDR, PHY_MODECTL, PHY_RESET); |
| 354 | /* and clear it again */ |
| 355 | WrPHYReg(PHYADDR, PHY_MODECTL, 0x0000); |
| 356 | do { |
| 357 | /* poll until reset is complete */ |
| 358 | phydat = RdPHYReg(PHYADDR, PHY_MODECTL); |
| 359 | } while ((phydat & PHY_RESET) != 0); |
| 360 | } |
| 361 | |
| 362 | int SetupSystemRegs(int *opmode) |
| 363 | { |
| 364 | u16 sysctl, phydat; |
| 365 | int count = 0; |
| 366 | /* Enable PHY output */ |
| 367 | *pVR_CTL |= PHYCLKOE; |
| 368 | /* MDC = 2.5 MHz */ |
| 369 | sysctl = SET_MDCDIV(24); |
| 370 | /* Odd word alignment for Receive Frame DMA word */ |
| 371 | /* Configure checksum support and rcve frame word alignment */ |
| 372 | sysctl |= RXDWA | RXCKS; |
| 373 | *pEMAC_SYSCTL = sysctl; |
| 374 | /* auto negotiation on */ |
| 375 | /* full duplex */ |
| 376 | /* 100 Mbps */ |
| 377 | phydat = PHY_ANEG_EN | PHY_DUPLEX | PHY_SPD_SET; |
| 378 | WrPHYReg(PHYADDR, PHY_MODECTL, phydat); |
| 379 | do { |
| 380 | udelay(1000); |
| 381 | phydat = RdPHYReg(PHYADDR, PHY_MODESTAT); |
| 382 | if (count > 3000) { |
| 383 | printf |
| 384 | ("Link is down, please check your network connection\n"); |
| 385 | return -1; |
| 386 | } |
| 387 | count++; |
| 388 | } while (!(phydat & 0x0004)); |
| 389 | |
| 390 | phydat = RdPHYReg(PHYADDR, PHY_ANLPAR); |
| 391 | |
| 392 | if ((phydat & 0x0100) || (phydat & 0x0040)) |
| 393 | *opmode = FDMODE; |
| 394 | else |
| 395 | *opmode = 0; |
| 396 | |
| 397 | *pEMAC_MMC_CTL = RSTC | CROLL; |
| 398 | |
| 399 | /* Initialize the TX DMA channel registers */ |
| 400 | *pDMA2_X_COUNT = 0; |
| 401 | *pDMA2_X_MODIFY = 4; |
| 402 | *pDMA2_Y_COUNT = 0; |
| 403 | *pDMA2_Y_MODIFY = 0; |
| 404 | |
| 405 | /* Initialize the RX DMA channel registers */ |
| 406 | *pDMA1_X_COUNT = 0; |
| 407 | *pDMA1_X_MODIFY = 4; |
| 408 | *pDMA1_Y_COUNT = 0; |
| 409 | *pDMA1_Y_MODIFY = 0; |
| 410 | return 0; |
| 411 | } |
| 412 | |
| 413 | ADI_ETHER_BUFFER *SetupRxBuffer(int no) |
| 414 | { |
| 415 | ADI_ETHER_FRAME_BUFFER *frmbuf; |
| 416 | ADI_ETHER_BUFFER *buf; |
| 417 | int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */ |
| 418 | int total_size = nobytes_buffer + RECV_BUFSIZE; |
| 419 | |
| 420 | buf = (ADI_ETHER_BUFFER *) (RXBUF_BASE_ADDR + no * total_size); |
| 421 | frmbuf = |
| 422 | (ADI_ETHER_FRAME_BUFFER *) (RXBUF_BASE_ADDR + no * total_size + |
| 423 | nobytes_buffer); |
| 424 | |
| 425 | memset(buf, 0x00, nobytes_buffer); |
| 426 | buf->FrmData = frmbuf; |
| 427 | memset(frmbuf, 0xfe, RECV_BUFSIZE); |
| 428 | |
| 429 | /* set up first desc to point to receive frame buffer */ |
| 430 | buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]); |
| 431 | buf->Dma[0].START_ADDR = (u32) buf->FrmData; |
| 432 | buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */ |
| 433 | buf->Dma[0].CONFIG.b_WNR = 1; /* Write to memory */ |
| 434 | buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| 435 | buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */ |
| 436 | buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */ |
| 437 | |
| 438 | /* set up second desc to point to status word */ |
| 439 | buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]); |
| 440 | buf->Dma[1].START_ADDR = (u32) & buf->IPHdrChksum; |
| 441 | buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */ |
| 442 | buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */ |
| 443 | buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| 444 | buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */ |
| 445 | buf->Dma[1].CONFIG.b_NDSIZE = 5; /* must be 0 when FLOW is 0 */ |
| 446 | buf->Dma[1].CONFIG.b_FLOW = 7; /* stop */ |
| 447 | |
| 448 | return buf; |
| 449 | } |
| 450 | |
| 451 | ADI_ETHER_BUFFER *SetupTxBuffer(int no) |
| 452 | { |
| 453 | ADI_ETHER_FRAME_BUFFER *frmbuf; |
| 454 | ADI_ETHER_BUFFER *buf; |
| 455 | int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */ |
| 456 | int total_size = nobytes_buffer + RECV_BUFSIZE; |
| 457 | |
| 458 | buf = (ADI_ETHER_BUFFER *) (TXBUF_BASE_ADDR + no * total_size); |
| 459 | frmbuf = |
| 460 | (ADI_ETHER_FRAME_BUFFER *) (TXBUF_BASE_ADDR + no * total_size + |
| 461 | nobytes_buffer); |
| 462 | |
| 463 | memset(buf, 0x00, nobytes_buffer); |
| 464 | buf->FrmData = frmbuf; |
| 465 | memset(frmbuf, 0x00, RECV_BUFSIZE); |
| 466 | |
| 467 | /* set up first desc to point to receive frame buffer */ |
| 468 | buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]); |
| 469 | buf->Dma[0].START_ADDR = (u32) buf->FrmData; |
| 470 | buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */ |
| 471 | buf->Dma[0].CONFIG.b_WNR = 0; /* Read to memory */ |
| 472 | buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| 473 | buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */ |
| 474 | buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */ |
| 475 | |
| 476 | /* set up second desc to point to status word */ |
| 477 | buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]); |
| 478 | buf->Dma[1].START_ADDR = (u32) & buf->StatusWord; |
| 479 | buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */ |
| 480 | buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */ |
| 481 | buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ |
| 482 | buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */ |
| 483 | buf->Dma[1].CONFIG.b_NDSIZE = 0; /* must be 0 when FLOW is 0 */ |
| 484 | buf->Dma[1].CONFIG.b_FLOW = 0; /* stop */ |
| 485 | |
| 486 | return buf; |
| 487 | } |
| 488 | |
| 489 | #if defined(CONFIG_POST) && defined(CFG_POST_ETHER) |
| 490 | int ether_post_test(int flags) |
| 491 | { |
| 492 | uchar buf[64]; |
| 493 | int i, value = 0; |
| 494 | int length; |
| 495 | |
| 496 | printf("\n--------"); |
| 497 | bfin_EMAC_init(NULL, NULL); |
| 498 | /* construct the package */ |
| 499 | buf[0] = buf[6] = (unsigned char)(*pEMAC_ADDRLO & 0xFF); |
| 500 | buf[1] = buf[7] = (unsigned char)((*pEMAC_ADDRLO & 0xFF00) >> 8); |
| 501 | buf[2] = buf[8] = (unsigned char)((*pEMAC_ADDRLO & 0xFF0000) >> 16); |
| 502 | buf[3] = buf[9] = (unsigned char)((*pEMAC_ADDRLO & 0xFF000000) >> 24); |
| 503 | buf[4] = buf[10] = (unsigned char)(*pEMAC_ADDRHI & 0xFF); |
| 504 | buf[5] = buf[11] = (unsigned char)((*pEMAC_ADDRHI & 0xFF00) >> 8); |
| 505 | buf[12] = 0x08; /* Type: ARP */ |
| 506 | buf[13] = 0x06; |
| 507 | buf[14] = 0x00; /* Hardware type: Ethernet */ |
| 508 | buf[15] = 0x01; |
| 509 | buf[16] = 0x08; /* Protocal type: IP */ |
| 510 | buf[17] = 0x00; |
| 511 | buf[18] = 0x06; /* Hardware size */ |
| 512 | buf[19] = 0x04; /* Protocol size */ |
| 513 | buf[20] = 0x00; /* Opcode: request */ |
| 514 | buf[21] = 0x01; |
| 515 | |
| 516 | for (i = 0; i < 42; i++) |
| 517 | buf[i + 22] = i; |
| 518 | printf("--------Send 64 bytes......\n"); |
| 519 | bfin_EMAC_send(NULL, (volatile void *)buf, 64); |
| 520 | for (i = 0; i < 100; i++) { |
| 521 | udelay(10000); |
| 522 | if ((rxbuf[rxIdx]->StatusWord & RX_COMP) != 0) { |
| 523 | value = 1; |
| 524 | break; |
| 525 | } |
| 526 | } |
| 527 | if (value == 0) { |
| 528 | printf("--------EMAC can't receive any data\n"); |
| 529 | eth_halt(); |
| 530 | return -1; |
| 531 | } |
| 532 | length = rxbuf[rxIdx]->StatusWord & 0x000007FF - 4; |
| 533 | for (i = 0; i < length; i++) { |
| 534 | if (rxbuf[rxIdx]->FrmData->Dest[i] != buf[i]) { |
| 535 | printf("--------EMAC receive error data!\n"); |
| 536 | eth_halt(); |
| 537 | return -1; |
| 538 | } |
| 539 | } |
| 540 | printf("--------receive %d bytes, matched\n", length); |
| 541 | bfin_EMAC_halt(NULL); |
| 542 | return 0; |
| 543 | } |
| 544 | #endif |
| 545 | #endif /* CFG_CMD_NET */ |