blob: 035ebc6935592b97a769e86a69b5e04988e64c96 [file] [log] [blame]
wdenkcc1c8a12002-11-02 22:58:18 +00001/*
wdenk414eec32005-04-02 22:37:54 +00002 * (C) Copyright 2001-2005
wdenkcc1c8a12002-11-02 22:58:18 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC860 1
37#define CONFIG_AMX860 1
38
39#undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */
40#undef CONFIG_8xx_CONS_SMC2
41#define CONFIG_8xx_CONS_SCC2 1
42#undef CONFIG_8xx_CONS_NONE
43#define CONFIG_BAUDRATE 9600
44#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
45
46#define MPC8XX_FACT 10 /* Multiply by 10 */
47#define MPC8XX_XIN 5000000 /* 5 MHz in */
48#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
49
wdenkcc1c8a12002-11-02 22:58:18 +000050#if 0
51#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
52#else
53#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
54#endif
55
56#define CONFIG_BOOTCOMMAND \
57 "bootp;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010058 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
59 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
wdenkcc1c8a12002-11-02 22:58:18 +000060 "bootm" /* autoboot command */
61
62#undef CONFIG_BOOTARGS
63
Jon Loeliger498ff9a2007-07-05 19:13:52 -050064#undef CONFIG_WATCHDOG /* watchdog disabled */
65
66#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
67
68#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
69
70
71/*
72 * Command line configuration.
73 */
74#include <config_cmd_default.h>
75
76#define CONFIG_CMD_DHCP
77#define CONFIG_CMD_DATE
78#define CONFIG_CMD_NFS
79#define CONFIG_CMD_SNTP
80
81
82#if defined(CONFIG_CMD_KGDB)
wdenkcc1c8a12002-11-02 22:58:18 +000083#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
84#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
85#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
86#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
87#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
88#endif
89
Jon Loeliger5d2ebe12007-07-09 21:16:53 -050090
91/*
92 * BOOTP options
93 */
94#define CONFIG_BOOTP_BOOTFILESIZE
95#define CONFIG_BOOTP_BOOTPATH
96#define CONFIG_BOOTP_GATEWAY
97#define CONFIG_BOOTP_HOSTNAME
98#define CONFIG_BOOTP_SUBNETMASK
99
wdenkcc1c8a12002-11-02 22:58:18 +0000100
wdenkcc1c8a12002-11-02 22:58:18 +0000101/*
102 * Miscellaneous configurable options
103 */
104#define CFG_LONGHELP /* undef to save memory */
105#define CFG_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500106#if defined(CONFIG_CMD_KGDB)
wdenkcc1c8a12002-11-02 22:58:18 +0000107#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
108#else
109#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
110#endif
111#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
112#define CFG_MAXARGS 16 /* max number of command args */
113#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
114
115#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
116#define CFG_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */
117
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200118#define CFG_LOAD_ADDR 0x00100000
wdenkcc1c8a12002-11-02 22:58:18 +0000119
120#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
121
122#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
123
124/*
125 * Low Level Configuration Settings
126 * (address mappings, register initial values, etc.)
127 * You should know what you are doing if you make changes here.
128 */
129
130/*-----------------------------------------------------------------------
131 * Internal Memory Mapped Register
132 */
133#define CFG_IMMR 0xFF000000
134
135/*-----------------------------------------------------------------------
136 * Definitions for initial stack pointer and data area (in DPRAM)
137 */
138#define CFG_INIT_RAM_ADDR CFG_IMMR
139#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
140#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
141#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
142#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
143
144/*-----------------------------------------------------------------------
145 * Start addresses for the final memory configuration
146 * (Set up by the startup code)
147 * Please note that CFG_SDRAM_BASE _must_ start at 0
148 */
149#define CFG_SDRAM_BASE 0x00000000
150#define CFG_FLASH_BASE 0x40000000
151#if defined(DEBUG)
152#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
153#else
154#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
155#endif
156#define CFG_MONITOR_BASE CFG_FLASH_BASE
157#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
158
159/*
160 * U-Boot for AMX board supports two types of memory extension
161 * modules: one that provides 4 MB flash memory, and another one with
162 * 16 MB EDO DRAM.
163 *
164 * The flash module swaps the CS0 and CS1 signals: if the module is
165 * installed, CS0 is connected to Flash on the module and CS1 is
166 * connected to the on-board Flash. This means that you must intall
167 * U-Boot when the Flash module is plugged in, if you plan to use
168 * it.
169 *
170 * To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT
171 * must be defined. The DRAM module uses CS1.
172 *
173 * Only one of these modules may be installed at a time. If U-Boot
174 * is compiled with the CONFIG_AMX_RAM_EXT option set, it will not
175 * work if the Flash extension module is installed instead of the
176 * DRAM module.
177 */
178#define CONFIG_AMX_RAM_EXT /* 16Mb Ext. DRAM module support */
179
180/*
181 * For booting Linux, the board info and command line data
182 * have to be in the first 8 MB of memory, since this is
183 * the maximum mapped by the Linux kernel during initialization.
184 *
185 * Use 4 MB for without and 8 MB with 16 MB DRAM extension module
186 * (CONFIG_AMX_RAM_EXT)
187 */
188#ifdef CONFIG_AMX_RAM_EXT
189# define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
190#else
191# define CFG_BOOTMAPSZ (4 << 20) /* Initial Memory map for Linux */
192#endif
193/*-----------------------------------------------------------------------
194 * FLASH organization
195 */
196#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
197#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
198
199#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
200#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
201
202#define CFG_ENV_IS_IN_FLASH 1
203#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
204#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
205
206/*-----------------------------------------------------------------------
207 * Cache Configuration
208 */
209#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500210#if defined(CONFIG_CMD_KGDB)
wdenkcc1c8a12002-11-02 22:58:18 +0000211#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
212#endif
213
214/*-----------------------------------------------------------------------
215 * SYPCR - System Protection Control 11-9
216 * SYPCR can only be written once after reset!
217 *-----------------------------------------------------------------------
218 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
219 */
220#if defined(CONFIG_WATCHDOG)
221#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
222 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
223#else
224#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
225#endif
226
227/*-----------------------------------------------------------------------
228 * SIUMCR - SIU Module Configuration 11-6
229 *-----------------------------------------------------------------------
230 * PCMCIA config., multi-function pin tri-state
231 */
232#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
233
234/*-----------------------------------------------------------------------
235 * TBSCR - Time Base Status and Control 11-26
236 *-----------------------------------------------------------------------
237 * Clear Reference Interrupt Status, Timebase freezing enabled
238 */
239#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
240
241/*-----------------------------------------------------------------------
242 * PISCR - Periodic Interrupt Status and Control 11-31
243 *-----------------------------------------------------------------------
244 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
245 */
246#define CFG_PISCR (PISCR_PS | PISCR_PITF)
247
248/*-----------------------------------------------------------------------
249 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
250 *-----------------------------------------------------------------------
251 * set the PLL, the low-power modes and the reset control (15-29)
252 */
253#define CFG_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
254 PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
255
256/*-----------------------------------------------------------------------
257 * SCCR - System Clock and reset Control Register 15-27
258 *-----------------------------------------------------------------------
259 * Set clock output, timebase and RTC source and divider,
260 * power management and some other internal clocks
261 */
262#define SCCR_MASK SCCR_EBDF11
263#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
264
265#define CFG_DER 0
266
267/*
268 * Init Memory Controller:
269 *
270 * BR0/1 and OR0/1 (FLASH)
271 */
272
273#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
274#ifndef CONFIG_AMX_RAM_EXT
275#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
276#endif
277
278#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
279#define CFG_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */
280
281/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
282/* 0x00000800 0x00000400 0x00000100 0x00000030 0x00000004 */
283#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX)
284
285#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
286
287#define CFG_OR0_PRELIM 0xFFC00954 /* Real values for the board */
288#define CFG_BR0_PRELIM 0x40000001 /* Real values for the board */
289
290#ifndef CONFIG_AMX_RAM_EXT
291#define CFG_OR1_REMAP CFG_OR0_REMAP
292#define CFG_OR1_PRELIM 0xFFC00954 /* Real values for the board */
293#define CFG_BR1_PRELIM 0x60000001 /* Real values for the board */
294#endif
295
296/* DSP ("Glue") Xilinx */
297#define CFG_OR6_PRELIM 0xFFFF8000 /* 32kB, 15 waits, cs after addr, no bursts */
298#define CFG_BR6_PRELIM 0x60000401 /* use GPCM for CS generation, 8 bit port */
299
300/*
301 * Internal Definitions
302 *
303 * Boot Flags
304 */
305#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
306#define BOOTFLAG_WARM 0x02 /* Software reboot */
307
308#endif /* __CONFIG_H */