blob: 1b917b3147828a2e914beb614c995062a01ec95b [file] [log] [blame]
wdenk8ed96042005-01-09 23:16:25 +00001/*
2 * (C) Copyright 2004
3 * Texas Instruments, <www.ti.com>
4 * Richard Woodruff <r-woodruff2@ti.com>
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24#include <common.h>
25#include <asm/arch/omap2420.h>
26#include <asm/io.h>
27#include <asm/arch/bits.h>
28#include <asm/arch/mux.h>
29#include <asm/arch/sys_proto.h>
30#include <asm/arch/sys_info.h>
31#include <asm/arch/mem.h>
32#include <i2c.h>
33#include <asm/mach-types.h>
Jon Loeliger3fe00102007-07-09 18:38:39 -050034#if defined(CONFIG_CMD_NAND)
Bartlomiej Siekaaddb2e12006-03-05 18:57:33 +010035#include <linux/mtd/nand_legacy.h>
wdenk289f9322005-01-12 00:15:14 +000036extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
37#endif
38
Wolfgang Denkd87080b2006-03-31 18:32:53 +020039DECLARE_GLOBAL_DATA_PTR;
40
41void wait_for_command_complete(unsigned int wd_base);
wdenk8ed96042005-01-09 23:16:25 +000042
43/*******************************************************
44 * Routine: delay
45 * Description: spinning delay to use before udelay works
46 ******************************************************/
47static inline void delay (unsigned long loops)
48{
wdenk289f9322005-01-12 00:15:14 +000049 __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
50 "bne 1b":"=r" (loops):"0" (loops));
wdenk8ed96042005-01-09 23:16:25 +000051}
52
53/*****************************************
54 * Routine: board_init
55 * Description: Early hardware init.
56 *****************************************/
57int board_init (void)
58{
wdenk289f9322005-01-12 00:15:14 +000059 gpmc_init(); /* in SRAM or SDRM, finish GPMC */
60
wdenk8ed96042005-01-09 23:16:25 +000061 gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */
62 gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100); /* adress of boot parameters */
63
64 return 0;
65}
66
67/**********************************************************
Wolfgang Denkc97a2aa2005-09-25 00:59:24 +020068 * Routine: try_unlock_sram()
69 * Description: If chip is GP type, unlock the SRAM for
70 * general use.
71 ***********************************************************/
72void try_unlock_sram(void)
73{
Wolfgang Denk49a75812005-09-25 18:41:04 +020074 /* if GP device unlock device SRAM for general use */
75 if (get_device_type() == GP_DEVICE) {
76 __raw_writel(0xFF, A_REQINFOPERM0);
77 __raw_writel(0xCFDE, A_READPERM0);
78 __raw_writel(0xCFDE, A_WRITEPERM0);
79 }
80}
81
82/**********************************************************
wdenk8ed96042005-01-09 23:16:25 +000083 * Routine: s_init
84 * Description: Does early system init of muxing and clocks.
wdenk289f9322005-01-12 00:15:14 +000085 * - Called path is with sram stack.
wdenk8ed96042005-01-09 23:16:25 +000086 **********************************************************/
wdenk289f9322005-01-12 00:15:14 +000087void s_init(void)
wdenk8ed96042005-01-09 23:16:25 +000088{
wdenk289f9322005-01-12 00:15:14 +000089 int in_sdram = running_in_sdram();
90
wdenk8ed96042005-01-09 23:16:25 +000091 watchdog_init();
92 set_muxconf_regs();
93 delay(100);
Wolfgang Denkc97a2aa2005-09-25 00:59:24 +020094 try_unlock_sram();
wdenk8ed96042005-01-09 23:16:25 +000095
wdenk289f9322005-01-12 00:15:14 +000096 if(!in_sdram)
wdenk8ed96042005-01-09 23:16:25 +000097 prcm_init();
98
99 peripheral_enable();
100 icache_enable();
wdenk289f9322005-01-12 00:15:14 +0000101 if (!in_sdram)
102 sdrc_init();
wdenk8ed96042005-01-09 23:16:25 +0000103}
104
105/*******************************************************
106 * Routine: misc_init_r
107 * Description: Init ethernet (done here so udelay works)
108 ********************************************************/
109int misc_init_r (void)
110{
111 ether_init(); /* better done here so timers are init'ed */
112 return(0);
113}
114
115/****************************************
116 * Routine: watchdog_init
117 * Description: Shut down watch dogs
118 *****************************************/
119void watchdog_init(void)
120{
wdenk8ed96042005-01-09 23:16:25 +0000121 /* There are 4 watch dogs. 1 secure, and 3 general purpose.
Wolfgang Denkfe7eb5d2005-09-25 02:00:47 +0200122 * The ROM takes care of the secure one. Of the 3 GP ones,
Wolfgang Denkc97a2aa2005-09-25 00:59:24 +0200123 * 1 can reset us directly, the other 2 only generate MPU interrupts.
124 */
wdenk8ed96042005-01-09 23:16:25 +0000125 __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
126 wait_for_command_complete(WD2_BASE);
127 __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
128
129#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
130 __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
131 wait_for_command_complete(WD3_BASE);
132 __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
133
134 __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
135 wait_for_command_complete(WD4_BASE);
136 __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
137#endif
138}
139
140/******************************************************
141 * Routine: wait_for_command_complete
142 * Description: Wait for posting to finish on watchdog
143 ******************************************************/
Wolfgang Denk49a75812005-09-25 18:41:04 +0200144void wait_for_command_complete(unsigned int wd_base)
wdenk8ed96042005-01-09 23:16:25 +0000145{
146 int pending = 1;
147 do {
148 pending = __raw_readl(wd_base+WWPS);
149 } while (pending);
150}
151
152/*******************************************************************
153 * Routine:ether_init
154 * Description: take the Ethernet controller out of reset and wait
155 * for the EEPROM load to complete.
156 ******************************************************************/
157void ether_init (void)
158{
159#ifdef CONFIG_DRIVER_LAN91C96
160 int cnt = 20;
161
wdenk289f9322005-01-12 00:15:14 +0000162 __raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */
163
wdenk8ed96042005-01-09 23:16:25 +0000164 __raw_writew(0x0, LAN_RESET_REGISTER);
165 do {
166 __raw_writew(0x1, LAN_RESET_REGISTER);
167 udelay (100);
168 if (cnt == 0)
169 goto h4reset_err_out;
170 --cnt;
171 } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
172
173 cnt = 20;
174
175 do {
176 __raw_writew(0x0, LAN_RESET_REGISTER);
177 udelay (100);
178 if (cnt == 0)
179 goto h4reset_err_out;
180 --cnt;
181 } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
182 udelay (1000);
183
184 *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
185 udelay (1000);
186
187 h4reset_err_out:
188 return;
189#endif
190}
191
192/**********************************************
193 * Routine: dram_init
194 * Description: sets uboots idea of sdram size
195 **********************************************/
196int dram_init (void)
197{
wdenk8ed96042005-01-09 23:16:25 +0000198 unsigned int size0=0,size1=0;
Wolfgang Denk49a75812005-09-25 18:41:04 +0200199 u32 mtype, btype, rev, cpu;
wdenk289f9322005-01-12 00:15:14 +0000200 u8 chg_on = 0x5; /* enable charge of back up battery */
201 u8 vmode_on = 0x8C;
202 #define NOT_EARLY 0
wdenk8ed96042005-01-09 23:16:25 +0000203
204 i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); /* need this a bit early */
205
206 btype = get_board_type();
207 mtype = get_mem_type();
Wolfgang Denk49a75812005-09-25 18:41:04 +0200208 rev = get_cpu_rev();
209 cpu = get_cpu_type();
wdenk8ed96042005-01-09 23:16:25 +0000210
211 display_board_info(btype);
wdenk289f9322005-01-12 00:15:14 +0000212 if (btype == BOARD_H4_MENELAUS){
213 update_mux(btype,mtype); /* combo part on menelaus */
214 i2c_write(I2C_MENELAUS, 0x20, 1, &chg_on, 1); /*fix POR reset bug */
215 i2c_write(I2C_MENELAUS, 0x2, 1, &vmode_on, 1); /* VCORE change on VMODE */
216 }
wdenk8ed96042005-01-09 23:16:25 +0000217
218 if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
219 do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
Wolfgang Denk49a75812005-09-25 18:41:04 +0200220 }
221 size0 = get_sdr_cs_size(SDRC_CS0_OSET);
222 size1 = get_sdr_cs_size(SDRC_CS1_OSET);
wdenk8ed96042005-01-09 23:16:25 +0000223
224 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
225 gd->bd->bi_dram[0].size = size0;
Wolfgang Denk49a75812005-09-25 18:41:04 +0200226 if(rev == CPU_2420_2422_ES1) /* ES1's 128MB remap granularity isn't worth doing */
227 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
228 else /* ES2 and above can remap at 32MB granularity */
229 gd->bd->bi_dram[1].start = PHYS_SDRAM_1+size0;
wdenk8ed96042005-01-09 23:16:25 +0000230 gd->bd->bi_dram[1].size = size1;
231
232 return 0;
233}
234
235/**********************************************************
236 * Routine: set_muxconf_regs
237 * Description: Setting up the configuration Mux registers
238 * specific to the hardware
239 *********************************************************/
240void set_muxconf_regs (void)
241{
242 muxSetupSDRC();
243 muxSetupGPMC();
244 muxSetupUsb0();
245 muxSetupUart3();
246 muxSetupI2C1();
247 muxSetupUART1();
248 muxSetupLCD();
249 muxSetupCamera();
250 muxSetupMMCSD();
251 muxSetupTouchScreen();
252 muxSetupHDQ();
253}
254
255/*****************************************************************
256 * Routine: peripheral_enable
257 * Description: Enable the clks & power for perifs (GPT2, UART1,...)
258 ******************************************************************/
259void peripheral_enable(void)
260{
261 unsigned int v, if_clks=0, func_clks=0;
262
263 /* Enable GP2 timer.*/
264 if_clks |= BIT4;
265 func_clks |= BIT4;
266 v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */
267 __raw_writel(v, CM_CLKSEL2_CORE);
268 __raw_writel(0x1, CM_CLKSEL_WKUP);
269
270#ifdef CFG_NS16550
271 /* Enable UART1 clock */
272 func_clks |= BIT21;
273 if_clks |= BIT21;
274#endif
275 v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
276 __raw_writel(v,CM_ICLKEN1_CORE );
277 v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
278 __raw_writel(v, CM_FCLKEN1_CORE);
279 delay(1000);
280
281#ifndef KERNEL_UPDATED
282 {
283#define V1 0xffffffff
284#define V2 0x00000007
285
286 __raw_writel(V1, CM_FCLKEN1_CORE);
287 __raw_writel(V2, CM_FCLKEN2_CORE);
288 __raw_writel(V1, CM_ICLKEN1_CORE);
289 __raw_writel(V1, CM_ICLKEN2_CORE);
290 }
291#endif
292}
293
294/****************************************
295 * Routine: muxSetupUsb0 (ostboot)
296 * Description: Setup usb muxing
297 *****************************************/
298void muxSetupUsb0(void)
299{
300 volatile uint8 *MuxConfigReg;
301 volatile uint32 *otgCtrlReg;
302
303 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
304 *MuxConfigReg &= (uint8)(~0x1F);
305
306 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
307 *MuxConfigReg &= (uint8)(~0x1F);
308
309 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
310 *MuxConfigReg &= (uint8)(~0x1F);
311
312 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
313 *MuxConfigReg &= (uint8)(~0x1F);
314
315 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
316 *MuxConfigReg &= (uint8)(~0x1F);
317
318 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
319 *MuxConfigReg &= (uint8)(~0x1F);
320
321 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
322 *MuxConfigReg &= (uint8)(~0x1F);
323
324 /* setup for USB VBus detection */
325 otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL;
326 *otgCtrlReg |= 0x00040000; /* bit 18 */
327}
328
329/****************************************
330 * Routine: muxSetupUart3 (ostboot)
331 * Description: Setup uart3 muxing
332 *****************************************/
333void muxSetupUart3(void)
334{
335 volatile uint8 *MuxConfigReg;
336
337 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX;
338 *MuxConfigReg &= (uint8)(~0x1F);
339
340 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX;
341 *MuxConfigReg &= (uint8)(~0x1F);
342}
343
344/****************************************
345 * Routine: muxSetupI2C1 (ostboot)
346 * Description: Setup i2c muxing
347 *****************************************/
348void muxSetupI2C1(void)
349{
350 volatile unsigned char *MuxConfigReg;
351
352 /* I2C1 Clock pin configuration, PIN = M19 */
353 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
wdenk082acfd2005-01-10 00:01:04 +0000354 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000355
356 /* I2C1 Data pin configuration, PIN = L15 */
357 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
wdenk082acfd2005-01-10 00:01:04 +0000358 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000359
360 /* Pull-up required on data line */
361 /* external pull-up already present. */
362 /* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */
363}
364
365/****************************************
366 * Routine: muxSetupUART1 (ostboot)
367 * Description: Set up uart1 muxing
368 *****************************************/
369void muxSetupUART1(void)
370{
371 volatile unsigned char *MuxConfigReg;
372
373 /* UART1_CTS pin configuration, PIN = D21 */
374 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
375 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
376
377 /* UART1_RTS pin configuration, PIN = H21 */
378 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
379 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
380
381 /* UART1_TX pin configuration, PIN = L20 */
382 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
383 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
384
385 /* UART1_RX pin configuration, PIN = T21 */
386 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
387 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
388}
389
390/****************************************
391 * Routine: muxSetupLCD (ostboot)
392 * Description: Setup lcd muxing
393 *****************************************/
394void muxSetupLCD(void)
395{
396 volatile unsigned char *MuxConfigReg;
397
398 /* LCD_D0 pin configuration, PIN = Y7 */
399 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
wdenk082acfd2005-01-10 00:01:04 +0000400 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000401
402 /* LCD_D1 pin configuration, PIN = P10 */
403 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
wdenk082acfd2005-01-10 00:01:04 +0000404 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000405
406 /* LCD_D2 pin configuration, PIN = V8 */
407 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
wdenk082acfd2005-01-10 00:01:04 +0000408 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000409
410 /* LCD_D3 pin configuration, PIN = Y8 */
411 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
wdenk082acfd2005-01-10 00:01:04 +0000412 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000413
414 /* LCD_D4 pin configuration, PIN = W8 */
415 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
wdenk082acfd2005-01-10 00:01:04 +0000416 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000417
418 /* LCD_D5 pin configuration, PIN = R10 */
419 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
wdenk082acfd2005-01-10 00:01:04 +0000420 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000421
422 /* LCD_D6 pin configuration, PIN = Y9 */
423 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
wdenk082acfd2005-01-10 00:01:04 +0000424 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000425
426 /* LCD_D7 pin configuration, PIN = V9 */
427 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
wdenk082acfd2005-01-10 00:01:04 +0000428 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000429
430 /* LCD_D8 pin configuration, PIN = W9 */
431 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
wdenk082acfd2005-01-10 00:01:04 +0000432 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000433
434 /* LCD_D9 pin configuration, PIN = P11 */
435 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
wdenk082acfd2005-01-10 00:01:04 +0000436 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000437
438 /* LCD_D10 pin configuration, PIN = V10 */
439 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
wdenk082acfd2005-01-10 00:01:04 +0000440 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000441
442 /* LCD_D11 pin configuration, PIN = Y10 */
443 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
wdenk082acfd2005-01-10 00:01:04 +0000444 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000445
446 /* LCD_D12 pin configuration, PIN = W10 */
447 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
wdenk082acfd2005-01-10 00:01:04 +0000448 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000449
450 /* LCD_D13 pin configuration, PIN = R11 */
451 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
wdenk082acfd2005-01-10 00:01:04 +0000452 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000453
454 /* LCD_D14 pin configuration, PIN = V11 */
455 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
wdenk082acfd2005-01-10 00:01:04 +0000456 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000457
458 /* LCD_D15 pin configuration, PIN = W11 */
459 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
wdenk082acfd2005-01-10 00:01:04 +0000460 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000461
462 /* LCD_D16 pin configuration, PIN = P12 */
463 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
wdenk082acfd2005-01-10 00:01:04 +0000464 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000465
466 /* LCD_D17 pin configuration, PIN = R12 */
467 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
wdenk082acfd2005-01-10 00:01:04 +0000468 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000469
470 /* LCD_PCLK pin configuration, PIN = W6 */
471 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
wdenk082acfd2005-01-10 00:01:04 +0000472 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000473
474 /* LCD_VSYNC pin configuration, PIN = V7 */
475 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
wdenk082acfd2005-01-10 00:01:04 +0000476 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000477
478 /* LCD_HSYNC pin configuration, PIN = Y6 */
479 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
wdenk082acfd2005-01-10 00:01:04 +0000480 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000481
482 /* LCD_ACBIAS pin configuration, PIN = W7 */
483 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
wdenk082acfd2005-01-10 00:01:04 +0000484 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000485}
486
487/****************************************
488 * Routine: muxSetupCamera (ostboot)
489 * Description: Setup camera muxing
490 *****************************************/
491void muxSetupCamera(void)
492{
493 volatile unsigned char *MuxConfigReg;
494
495 /* CAMERA_RSTZ pin configuration, PIN = Y16 */
496 /* CAM_RST is connected through the I2C IO expander.*/
497 /* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
wdenk289f9322005-01-12 00:15:14 +0000498 /* *MuxConfigReg = 0x00 ; / * Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000499
500 /* CAMERA_XCLK pin configuration, PIN = U3 */
501 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
wdenk082acfd2005-01-10 00:01:04 +0000502 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000503
504 /* CAMERA_LCLK pin configuration, PIN = V5 */
505 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
wdenk082acfd2005-01-10 00:01:04 +0000506 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000507
508 /* CAMERA_VSYNC pin configuration, PIN = U2 */
509 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
wdenk082acfd2005-01-10 00:01:04 +0000510 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000511
512 /* CAMERA_HSYNC pin configuration, PIN = T3 */
513 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
wdenk082acfd2005-01-10 00:01:04 +0000514 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000515
516 /* CAMERA_DAT0 pin configuration, PIN = T4 */
517 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
wdenk082acfd2005-01-10 00:01:04 +0000518 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000519
520 /* CAMERA_DAT1 pin configuration, PIN = V2 */
521 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
wdenk082acfd2005-01-10 00:01:04 +0000522 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000523
524 /* CAMERA_DAT2 pin configuration, PIN = V3 */
525 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
wdenk082acfd2005-01-10 00:01:04 +0000526 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000527
528 /* CAMERA_DAT3 pin configuration, PIN = U4 */
529 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
wdenk082acfd2005-01-10 00:01:04 +0000530 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000531
532 /* CAMERA_DAT4 pin configuration, PIN = W2 */
533 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
wdenk082acfd2005-01-10 00:01:04 +0000534 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000535
536 /* CAMERA_DAT5 pin configuration, PIN = V4 */
537 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
wdenk082acfd2005-01-10 00:01:04 +0000538 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000539
540 /* CAMERA_DAT6 pin configuration, PIN = W3 */
541 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
wdenk082acfd2005-01-10 00:01:04 +0000542 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000543
544 /* CAMERA_DAT7 pin configuration, PIN = Y2 */
545 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
wdenk082acfd2005-01-10 00:01:04 +0000546 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000547
548 /* CAMERA_DAT8 pin configuration, PIN = Y4 */
549 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
wdenk082acfd2005-01-10 00:01:04 +0000550 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000551
552 /* CAMERA_DAT9 pin configuration, PIN = V6 */
553 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
wdenk082acfd2005-01-10 00:01:04 +0000554 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000555}
556
557/****************************************
558 * Routine: muxSetupMMCSD (ostboot)
559 * Description: set up MMC muxing
560 *****************************************/
561void muxSetupMMCSD(void)
562{
563 volatile unsigned char *MuxConfigReg;
564
565 /* SDMMC_CLKI pin configuration, PIN = H15 */
566 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
wdenk082acfd2005-01-10 00:01:04 +0000567 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000568
569 /* SDMMC_CLKO pin configuration, PIN = G19 */
570 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
wdenk082acfd2005-01-10 00:01:04 +0000571 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000572
573 /* SDMMC_CMD pin configuration, PIN = H18 */
574 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
wdenk082acfd2005-01-10 00:01:04 +0000575 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
576 /* External pull-ups are present. */
577 /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
wdenk8ed96042005-01-09 23:16:25 +0000578
579 /* SDMMC_DAT0 pin configuration, PIN = F20 */
580 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
wdenk082acfd2005-01-10 00:01:04 +0000581 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
582 /* External pull-ups are present. */
583 /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
wdenk8ed96042005-01-09 23:16:25 +0000584
585 /* SDMMC_DAT1 pin configuration, PIN = H14 */
586 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
wdenk082acfd2005-01-10 00:01:04 +0000587 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
588 /* External pull-ups are present. */
589 /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
wdenk8ed96042005-01-09 23:16:25 +0000590
591 /* SDMMC_DAT2 pin configuration, PIN = E19 */
592 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
wdenk082acfd2005-01-10 00:01:04 +0000593 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
594 /* External pull-ups are present. */
595 /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
wdenk8ed96042005-01-09 23:16:25 +0000596
597 /* SDMMC_DAT3 pin configuration, PIN = D19 */
598 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
wdenk082acfd2005-01-10 00:01:04 +0000599 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
600 /* External pull-ups are present. */
601 /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
wdenk8ed96042005-01-09 23:16:25 +0000602
603 /* SDMMC_DDIR0 pin configuration, PIN = F19 */
604 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
wdenk082acfd2005-01-10 00:01:04 +0000605 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000606
607 /* SDMMC_DDIR1 pin configuration, PIN = E20 */
608 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
wdenk082acfd2005-01-10 00:01:04 +0000609 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000610
611 /* SDMMC_DDIR2 pin configuration, PIN = F18 */
612 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
wdenk082acfd2005-01-10 00:01:04 +0000613 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000614
615 /* SDMMC_DDIR3 pin configuration, PIN = E18 */
616 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
wdenk082acfd2005-01-10 00:01:04 +0000617 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000618
619 /* SDMMC_CDIR pin configuration, PIN = G18 */
620 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
wdenk082acfd2005-01-10 00:01:04 +0000621 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000622
623 /* MMC_CD pin configuration, PIN = B3 ---2420IP ONLY---*/
624 /* MMC_CD for 2422IP=K1 */
625 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
wdenk082acfd2005-01-10 00:01:04 +0000626 *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000627
628 /* MMC_WP pin configuration, PIN = B4 */
629 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
wdenk082acfd2005-01-10 00:01:04 +0000630 *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000631}
632
633/******************************************
634 * Routine: muxSetupTouchScreen (ostboot)
635 * Description: Set up touch screen muxing
636 *******************************************/
637void muxSetupTouchScreen(void)
638{
639 volatile unsigned char *MuxConfigReg;
640
641 /* SPI1_CLK pin configuration, PIN = U18 */
642 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
wdenk082acfd2005-01-10 00:01:04 +0000643 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000644
645 /* SPI1_MOSI pin configuration, PIN = V20 */
646 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
wdenk082acfd2005-01-10 00:01:04 +0000647 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000648
649 /* SPI1_MISO pin configuration, PIN = T18 */
650 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
wdenk082acfd2005-01-10 00:01:04 +0000651 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000652
653 /* SPI1_nCS0 pin configuration, PIN = U19 */
654 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
wdenk082acfd2005-01-10 00:01:04 +0000655 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000656
657 /* PEN_IRQ pin configuration, PIN = P20 */
658 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
wdenk082acfd2005-01-10 00:01:04 +0000659 *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000660}
661
662/****************************************
663 * Routine: muxSetupHDQ (ostboot)
664 * Description: setup 1wire mux
665 *****************************************/
666void muxSetupHDQ(void)
667{
668 volatile unsigned char *MuxConfigReg;
669
670 /* HDQ_SIO pin configuration, PIN = N18 */
671 MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
wdenk082acfd2005-01-10 00:01:04 +0000672 *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
wdenk8ed96042005-01-09 23:16:25 +0000673}
674
675/***************************************************************
676 * Routine: muxSetupGPMC (ostboot)
677 * Description: Configures balls which cam up in protected mode
678 ***************************************************************/
679void muxSetupGPMC(void)
680{
681 volatile uint8 *MuxConfigReg;
wdenk289f9322005-01-12 00:15:14 +0000682 volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
wdenk8ed96042005-01-09 23:16:25 +0000683
684 /* gpmc_io_dir */
685 *MCR = 0x19000000;
686
687 /* NOR FLASH CS0 */
688 /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3 Pull/up - N/A */
689 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3,
690 *MuxConfigReg = 0x00 ;
691
692 /* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3 Pull/up - N/A */
693 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3,
694 *MuxConfigReg = 0x01 ;
695
696 /* MPDB(Multi Port Debug Port) CS1 */
697 /* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */
698 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1,
699 *MuxConfigReg = 0x00 ;
700
701 /* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
702 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
703 *MuxConfigReg = 0x00 ;
wdenk8ed96042005-01-09 23:16:25 +0000704}
705
706/****************************************************************
707 * Routine: muxSetupSDRC (ostboot)
708 * Description: Configures balls which come up in protected mode
709 ****************************************************************/
710void muxSetupSDRC(void)
711{
712 volatile uint8 *MuxConfigReg;
713
714 /* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1 Pull/up - N/A */
715 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1,
716 *MuxConfigReg = 0x00 ;
717
718 /* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2 Pull/up - N/A */
719 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2,
720 *MuxConfigReg = 0x00 ;
721
722 /* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3 Pull/up - N/A */
723 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3,
724 *MuxConfigReg = 0x00;
725
726 if (get_cpu_type() == CPU_2422) {
727 MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0,
728 *MuxConfigReg = 0x1b;
729 }
730}
731
732/*****************************************************************************
733 * Routine: update_mux()
734 * Description: Update balls which are different beween boards. All should be
735 * updated to match functionaly. However, I'm only updating ones
736 * which I'll be using for now. When power comes into play they
737 * all need updating.
738 *****************************************************************************/
739void update_mux(u32 btype,u32 mtype)
740{
741 u32 cpu, base = OMAP2420_CTRL_BASE;
742 cpu = get_cpu_type();
743
744 if (btype == BOARD_H4_MENELAUS) {
745 if (cpu == CPU_2420) {
746 /* PIN = B3, GPIO.0->KBR5, mode 3, (pun?),-DO-*/
747 __raw_writeb(0x3, base+0x30);
748 /* PIN = B13, GPIO.38->KBC6, mode 3, (pun?)-DO-*/
749 __raw_writeb(0x3, base+0xa3);
750 /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
751 /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
752 /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
753 /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
754 /* PIN = M1 (HSUSBOTG) */
755 /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
756 __raw_writeb(0x3, base+0x9d);
757 /* PIN = U32, (WLAN_CLKREQ) */
758 /* PIN = Y11, WLAN */
759 /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
760 __raw_writeb(0x3, base+0xe7);
761 /* PIN = AA8, mDOC */
762 /* PIN = AA10, BT */
763 /* PIN = AA13, WLAN */
764 /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
765 __raw_writeb(0x3, base+0x10e);
766 /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
767 __raw_writeb(0x3, base+0x110);
768 /* PIN = J15 HHUSB */
769 /* PIN = H19 HSUSB */
770 /* PIN = W13, P13, R13, W16 ... */
771 /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
772 __raw_writeb(0x3, base+0xde);
773 /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
774 __raw_writeb(0x0, base+0x12c);
775 /* PIN = AA17->sys_clkreq mode 0 -DO- */
776 __raw_writeb(0x0, base+0x136);
777 } else if (cpu == CPU_2422) {
778 /* PIN = B3, GPIO.0->nc, mode 3, set above (pun?)*/
779 /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
780 /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
781 /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
782 /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
783 __raw_writeb(0x0, base+0x92);
784 /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
785 /* PIN = M1 (HSUSBOTG) */
786 /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
787 __raw_writeb(0x3, base+0x10c);
788 /* PIN = U32, (WLAN_CLKREQ) */
789 /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
790 __raw_writeb(0x3, base+0x30);
791 /* PIN = AA8, mDOC */
792 /* PIN = AA10, BT */
793 /* PIN = AA12, WLAN */
794 /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
795 __raw_writeb(0x3, base+0x10e);
796 /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
797 __raw_writeb(0x3, base+0x110);
798 /* PIN = J15 HHUSB */
799 /* PIN = H19 HSUSB */
800 /* PIN = W13, P13, R13, W16 ... */
801 /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
802 __raw_writeb(0x3, base+0xde);
803 /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
804 __raw_writeb(0x0, base+0x12c);
805 /* PIN = AA17->sys_clkreq mode 0 -DO- */
806 __raw_writeb(0x0, base+0x136);
807 }
808
809 } else if (btype == BOARD_H4_SDP) {
810 if (cpu == CPU_2420) {
811 /* PIN = B3, GPIO.0->nc mode 3, set above (pun?)*/
812 /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
813 /* Pin = Y11 VLNQ */
814 /* Pin = AA4 VLNQ */
815 /* Pin = AA6 VLNQ */
816 /* Pin = AA8 VLNQ */
817 /* Pin = AA10 VLNQ */
818 /* Pin = AA12 VLNQ */
819 /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
820 __raw_writeb(0x3, base+0x10e);
821 /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
822 __raw_writeb(0x3, base+0x110);
823 /* PIN = J15 MDOC_nDMAREQ */
824 /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
825 __raw_writeb(0x3, base+0x114);
826 /* PIN = W13, V12, P13, R13, W19, W16 ... */
827 /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
828 } else if (cpu == CPU_2422) {
829 /* PIN = B3, GPIO.0->MMC_CD, mode 3, set above */
830 /* PIN = B13, GPIO.38->wlan_int, mode 3, (pun?)*/
831 /* Pin = Y11 VLNQ */
832 /* Pin = AA4 VLNQ */
833 /* Pin = AA6 VLNQ */
834 /* Pin = AA8 VLNQ */
835 /* Pin = AA10 VLNQ */
836 /* Pin = AA12 VLNQ */
837 /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
838 __raw_writeb(0x3, base+0x10e);
839 /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
840 __raw_writeb(0x3, base+0x110);
841 /* PIN = J15 MDOC_nDMAREQ */
842 /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
843 __raw_writeb(0x3, base+0x114);
844 /* PIN = W13, V12, P13, R13, W19, W16 ... */
845 /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
846 }
847 }
848}
wdenk289f9322005-01-12 00:15:14 +0000849
Jon Loeliger3fe00102007-07-09 18:38:39 -0500850#if defined(CONFIG_CMD_NAND)
wdenk289f9322005-01-12 00:15:14 +0000851void nand_init(void)
852{
853 extern flash_info_t flash_info[];
854
855 nand_probe(CFG_NAND_ADDR);
856 if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
857 print_size(nand_dev_desc[0].totlen, "\n");
858 }
859
860#ifdef CFG_JFFS2_MEM_NAND
861 flash_info[CFG_JFFS2_FIRST_BANK].flash_id = nand_dev_desc[0].id;
862 flash_info[CFG_JFFS2_FIRST_BANK].size = 1024*1024*2; /* only read kernel single meg partition */
863 flash_info[CFG_JFFS2_FIRST_BANK].sector_count = 1024; /* 1024 blocks in 16meg chip (use less for raw/copied partition) */
864 flash_info[CFG_JFFS2_FIRST_BANK].start[0] = 0x80200000; /* ?, ram for now, open question, copy to RAM or adapt for NAND */
865#endif
866}
867#endif